british flag
Resale Logo

ELIN used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information auctioneer  Die Auktionsprofis Ostermayer & Dr. Gold GbR  http://www.die-auktionsprofis.de 
banner logo
start page > keywords ELIN > results
954 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121128366 105

MEP COBRA 350 SX for sale
ALUMINIUM - COLD SAW


MEP ALU - COLD SAWS TYPE COBRA 350 SX -Half car mate -Pneumatic -Verstek Dubbel -3 pneumatic clamp -Automatic koeling en smering van het zaagblad -Nieuwe zaagblad -Beschermkap -Noodstop -400V PRICE is pl ...

 
MEP ALU - COLD SAWS

TYPE COBRA 350 SX

-Half car mate
-Pneumatic
-Verstek Dubbel
-3 pneumatic clamp
-Automatic koeling en smering van het zaagblad
-Nieuwe zaagblad
-Beschermkap
-Noodstop
-400V

PRICE is plus VAT

DUTCHMACH
Metal working machinery
ENSCHEDE - NETHERLANDS

(3 km from the German border)
 
Price  
    request
121111958 105

KASTO PKS 140 for sale
Circular Cold Saws


Circular saw machine manufacturer: KASTO type: PKS 140 Saw blade diameter: 315 / 350 x 3.5 mm DIN 8576 blade clamp: 0/4 x 11/63 mm Cutting capacity round Ã?: 10 - 85/105 mm Cutting capacity round 2- ...
used machine
 
Circular saw machine manufacturer: KASTO type: PKS 140


Saw blade diameter: 315 / 350 x 3.5 mm

DIN 8576 blade clamp: 0/4 x 11/63 mm

Cutting capacity round Ã?: 10 - 85/105 mm

Cutting capacity round 2-pole operation: 2 x Ã? 15-50 mm

Flat cutting area: 10 x 10 to 120 x 75/140 x 85 mm

Or 10 x 10 up to 120 x 95 mm

Saw blade ø: 00/420 x 4 mm

DIN 8576 blade clamp: 50/4 x 14/80 mm

Cutting capacity round Ã?: 10 - 130/140 mm

Flat cutting area: 10 x 10 up to 140 x 115 / 140 x 125 mm

Section square: 10 x 10 to 120 x 120 / 130 x 130 mm

Minimum piece length: 40 mm

Maximum permissible material Krummheit: 12 mm

Dimensions of the entire system:

Length incl. Sicherheitsabschrankung

Material output length 6,000 mm approx. - 10.400 mm

Chip conveyor width approx.: 2,500 mm

Height: 2200 mm

Material height: 950 mm

Total weight: 7,000 kg

Total HSS execution: 17 kW

Saw motor HSS design: 10 kW

Hydraulic drive: 3 kW

Cutting speed adjustable: 6-52 m / min

Cutting feed adjustable: 16-600 mm / min

Rapid traverse of carriage: 5000 mm / min

Material feed in a hub: 7-2,000 mm

Gate length: 7-99 mm

Material voltage hydraulic clamping force:

Machine Vice: 2,000 N

Feed Vice: 14.000 N

The sort distance on each side: 2,000 mm

Number of sort positions incl.

a position for cuts and pieces: 6 PCs

Magazine suitable for lengths of material output: 1,500-6,000 mm

Width of the template polder: 1,000 mm

Helical magazine capacity: 6,000 kg

Blade cleaning: by easily changeable Stiftspäneräumer

: Coolant coolant nozzle, volume of the coolant tank approx. 120 l, pump capacity 25 l/min at 5 m delivery height

Electrical equipment: according to EN 60204 VDE guidelines

Voltage 230 volts or 400 volts, 50 Hz

Control voltage 24 V DC

Other voltages on request at extra charge

Network type: TN network according to IEC 364 / VDE 0100

Protection against indirect contact: overcurrent protection device (zeroing).

The power of the operator (size and characteristics of the selected main fuse as well as the total impedance of PE and external conductor in the supply line of the machine) must be designed so that the permissible ABSC Stop time in case of an error is not exceeded.

The use of a residual current device of the mains power supply is prohibited.


Contact person Mr. Mueller see also our over 200 more deals at.

(Changes and errors in the technical data, information
and prices and subject to prior sale!)
 
Price  
    request
121111864 1401

collision protectionecke - 400x160x160mm - green


Used starting protection area â approx. 400 x 160 x 160 mm - Green - incl. ground anchor Solid starting-up protection for shelf stand. This stable rim protector protects your valuable equipment, shelving systems ...
used machine
 
Used starting protection area â approx. 400 x 160 x 160 mm - Green - incl. ground anchor

Solid starting-up protection for shelf stand. This stable rim protector protects your valuable equipment, shelving systems and electrical or piping from damage with forklifts or lift trucks. The starting-up protection is anchored with the four enclosed ground anchors from the area to be protected in the soil. Because there is no connection to shelf stand or machine, the starting-up protection can absorb large forces and derive safely into the ground.

These 90-degree design is intended for the protection of end stands of a shelf number. Starting-up protection should be selected for the central stand for an optimal protection of the shelf stand in U-shape.

Corresponds to the BGR 234

Regulating BG BGR 234 writes a starting-up protection in areas, where fixed shelves with no guideline listed funds loaded or unloaded, before. This starting-up protection ensures the prescribed protection of pallet racks, collar arm racks, wide clamping shelves and shelving.

Properties:
-Solid starting-up protection 5 mm strong steel
-Color: Green
-Yellow/black with stickers
-Secure fixation with four ground anchors
-Corresponds to BGR 234

Scope of delivery:
-A used rim protector
-Four ground anchors M12, 110 mm

Regulating BG BGR 234 writes a starting-up protection in areas, where fixed shelves with no guideline listed funds loaded or unloaded, before.

Mass approx.:

Height: 400 mm
Width: 160 mm
Depth: 160 mm
Material thickness: 5 mm

Properties:

Color: Green hole diameter approx.: 12 mm

Scope of delivery:

Start-up protection: 1 PCs.
Ground anchor: 4 PCs.

You can pick up this article by appointment at our warehouse in Krefeld, Germany. Of course, we deliver you the articles also in the House. To do this we will create an offer you. Please have understanding that we can call you free shipping without the zip code of your delivery address. We cooperate with several carriers, which operate different routes. Your advantage: We can gain the best transport price for you. Please contact them before you buy.
 
15 €  
    request
121093061 103

DMG DECKEL MAHO DMU 60 E for sale
CNC Milling Centers


Machining center - universal lid DMU 60 E-Nr. 1105-02327 make lid type DMU 60 E year 1998 State second-hand machine CNC TNC 426 control HEIDENHAIN storage HAGUENAU country of origin Germany delivery time upon request fre ...
used machine
 
Machining center - universal lid DMU 60 E-Nr. 1105-02327 make lid type DMU 60 E year 1998 State second-hand machine CNC TNC 426 control HEIDENHAIN storage HAGUENAU country of origin Germany delivery time upon request freight base EX WORK T technical details x way 630 mm y way 560 mm z-way 560 mm control TNC 426 HEIDENHAIN speed 12000 1/min recording SK 40 tool changer 25 POS.
Table: 1000 x 610 mm universal head manually rapid traverse 30 m / min total power requirement kW machine weight 6 tons description head manually swiveling,.
CNC HEIDENHAIN TNC 426
El. Handwheel,
12000 RPM
MAGAZINE 25 PROFESSIONAL SK 40

1998
18,500 €  
    request
121093052 103

ROVERA gantry for sale
milling machine


gantry milling machine used Rovera It is among the proposals of machine tools used for milling and between MILLING CNC PORTAL used we find the portal milling machine used Rovera The in used Rovera portal milling machi ...
used machine
 
gantry milling machine used Rovera It is among the proposals of machine tools used for milling and between MILLING CNC PORTAL used we find the portal milling machine used Rovera
The in used Rovera portal milling machine is an exclusive offer proposed by the industrialbay.it users.

Industrialbay deals with the sale of machine tools used for milling , for CNC MILLING PORTAL used.

Are you looking for a machine tool for milling ? In the category Milling you find the milling machine used cnc portal you are looking for

Some technical characteristics of a Rovera portal milling machine are:
year 2006
X = 15,000 mm, Y = 6200 mm light between the shoulders 5500, Z = 1500 mm
Height from spindle nose to worktable 2050 mm
spindle motor Siemens 60 kw
gear change ratio of 1: 1 and 1: 4
Recovery board game x Mechanical
siemens motors
measuring axis systems Heidenhain
numerical control selca 4060 d
Double operator station each with their own monitor
Siemens drives
X and y axis offset of guidelineari (Rexroth) z axis on turcite
flange for vertical machining (maximum speed 2000 g / min)
head orthogonal (maximum 1500 g / min) + testabirotativa Tecnai
Automatic transmission heads -head orthogonal index every 2.5 degrees revolutions 1500
pair 2000 n / m
chip Conveyors
Compresi Piani stolle
2006
Price  
  IT   request
121092983 706

KRONES Vineta for sale
Labelling machines


Labeller, Krones Vinetta Krones Vinetta sell wet glue labeling machine. Star set for 1 liter, 0.75 liter Schlegel and Bordeaux and 0, 25 l and 0.5 lFlaschen included! Used, fully functional, ready to use. Like to call ...

 
Labeller, Krones Vinetta
Krones Vinetta sell wet glue labeling machine. Star set for 1 liter, 0.75 liter Schlegel and Bordeaux and 0, 25 l and 0.5 lFlaschen included!
Used, fully functional, ready to use. Like to call for further information.
Price: 2500 EUR
 
2,500 €  
    request
121080715 2500

Spiral bicycle


â?¢ Length: approx. 1.30 m â?¢ Width: 0.40 m â?¢ Height: 0.50 m â?¢ steel â?¢ to the doweling

 
â?¢ Length: approx. 1.30 m
â?¢ Width: 0.40 m
â?¢ Height: 0.50 m
â?¢ steel
â?¢ to the doweling
 
100 €  
    request
121080605 102

HANKOOK V. TURNMILL VTC 5060E for sale


HANKOOK Vertical Turnmilll 5000/6000 x 4500 Model VTC-5060E New In 2010 Control Fanuc 31i A Equipped 4 jaw Chuck 5000mm ATC 24 ( milling 12 +  ...
used machine
 
HANKOOK Vertical Turnmilll 5000/6000 x 4500

Model VTC-5060E
New In 2010

Control Fanuc 31i A

Equipped 4 jaw Chuck 5000mm
ATC 24 ( milling 12 + turning 12 )
Through Spindle Coolant
Through Tool Coolant
Tool Setter
Heidenhain Scales ( X,Z,C )
High Pressure Coolant System
Hydraulic Power Unit,22kw
Hydrostatic Oil Cooling System,19.5KVA
Splash Guard
Telescopic Steel Cover ( X )
Chip Conveyor & Tank
Horizontal Attachment BT 50
? Universal Angle Attachment BT 50
Square Tool Holder 50 x 240,290mm
Square Tool Holder 50 x 190,240mm ( through coolant type )
Boring Tool Holder BA type 32 x 370mm
Boring Tool Holder BP type 32 x 320mm
Boring Tool Holder BF type 32 x 370mm
Side Lock Holder 80pie x 295mm
Work Light,Patrol Lamp
Leveling Blocks

Spec Table dia 5000mm
Turning dia 6000mm
Turning height 4500mm
Max torque 35,109N.m
Max cutting force 33,110kgf
Table load 300ton
Table speed 1~50rpm/auto 2 step
Ram travel 2500mm
Saddle cross travel 4235mm
Crossrail travel 3000mm
Milling spindle motor AC37/45kw
Milling spindle speed 30~3000rpm
Milling spindle torque 190kgf.m
Table index 0.001degree
C axis feed 0~900degree/min
C axis rotation 120degree/min
Rapid feed 6m/min ( X,Z ),500mm/min ( W )
Cutting feed 6000mm/min ( X,Z )
Ram section 400 x 400mm
Spindle taper ISO 50
Tool size 50 x 50mm
Max tool weight 110kg
ATC pull stud SK50A ( DIN69872 )
Table motor AC100kw x 2set
Servo motor AC14kw ( X,Z ),AC14kw x 2 ( W ),AC16kw ( C )
Machine weight 230ton
Machine dimension 14,000 x 7,500 x 13,100mm ( L x W x H )
2010
Price  
  PL   request
121068180 110

Angle table


Angle table XL virtually never used and in excellent condition. Swiveling in transverse axis (Y) approx. -3° up to + 47 ° Swiveling in longitudinal axis (X) approx. ± 12 mm Size 900 x 370 mm wit ...

 
Angle table XL virtually never used and in excellent condition.

Swiveling in transverse axis (Y) approx. -3° up to + 47 °

Swiveling in longitudinal axis (X) approx. ± 12 mm

Size 900 x 370 mm with 5 T-slots

Overall dimensions Lxwxh 900 x 370 x 220 mm

Weight approx. 200 kg
 
Price  
    request
121039323 703

GUENTHER PI10 for sale
Pickle injectors


Pickling injector Günther PI10, injector, machine with 10 needles, Pump and needle bar pressure regulator; independent switch, Hoses completely renewed Dimensions Lxwxh approx.: 135 x 55 x 185 cm, weight approx.: 245 ...
used machine
 
Pickling injector Günther PI10, injector, machine with 10 needles,
Pump and needle bar pressure regulator; independent switch,
Hoses completely renewed
Dimensions Lxwxh approx.: 135 x 55 x 185 cm, weight approx.: 245 kg.
Machine in excellent condition, fully functional
 
3,000 €  
    request
121039311 502

HSM KP 88 after paint renovation for sale
Channel baling presses


Max. pressure: 8,5 - 9 tons Year of production: 2007-2010 Unit pressure: 34-36 tons/m² Cross-section of the channel: 500 x 500 mm Filling inlet: 400 x 450 mm Supply: 400 V/ 4 kW Bale tying: man ...
used machine
 
Max. pressure: 8,5 - 9 tons
Year of production: 2007-2010
Unit pressure: 34-36 tons/m²
Cross-section of the channel: 500 x 500 mm
Filling inlet: 400 x 450 mm
Supply: 400 V/ 4 kW
Bale tying: manual

The machine is fully operational after service and after PREMIUM paint renovation.

Englisch - Ewelina Pekala +48 696 072 985
Deutsch - Ewelina Pekala +48 696 072 985
Polnisch – Ryszard £uba +48 501 330 786
Russisch – Alina Hykava +48 795 135 939
2010
3,630 €  
  PL   request
121033223 201

FROMMIA Tischkeisäge for sale


Gorgeous Frommia table saw blade up to 45 degree swiveling

 
Gorgeous Frommia table saw blade up to 45 degree swiveling
 
2,500 €  
    request
121028592 1300  

IAS, WEAN UNITED, ETC BILLET DIA. 270 - TUBE: 2-6 for sale
SEAMLESS STAINLES STEEL TUBE LINE


Qty. 1 Second-hand stainless steel seamless tube production line Mfc.: IAS, Wean United, Oksan, Daeho, Unwoo, Alco, Booster, Domino, Yamasui, Rainer,Inductotherm, Kieserling Built: 2013 - 2015 Entry billet dimensions: ...
used machine
 
Qty. 1 Second-hand stainless steel seamless tube production line
Mfc.: IAS, Wean United, Oksan, Daeho, Unwoo, Alco, Booster, Domino, Yamasui, Rainer,Inductotherm, Kieserling
Built: 2013 - 2015
Entry billet dimensions: dia. 190 – 270 mm Length: 500 – 950 mm
Product range. 2 – 6 inches SS Seamless Pipe Line Length: 3.5 – 30.0 m
Wall thickness: 1.0 – 70.0 mm Pipe dia.: 150 mm
Scope of supply: Vertical Heaters qty. 2 Extrusion Press 2500 MT
Pre-Straightening Machine (12 rolls) Bump Machine
Straightener (6 rolsl) Abrasive Cutter Horizontal Induction Heater Holding Chamber Furnace
Puller (2500 MT Press) Expanding Press Expanding Press Tool Set
Chamfering Machine Barrel Shot Blasting Machine Grinder Boiler Furnace Marking Machine Hydrostatic Test Eddy Current Test
2013
Price  
  DE   request
121016269 203

SCM SCM SUPERSET 23 for sale
Four-sided planing machines


Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Comments Cutting width mm 230 Cutting height mm 130 Number of  ...
used machine
 
Location

Gorzów Wlkp.
Conditions of delivery

OWN RECEIVING
Cost of delivery

to be negotiated
Startup type

to be negotiated
Description
Comments

Cutting width mm 230
Cutting height mm 130
Number of spindles 6
Spindle layout down / right / left / up / up / down
Spindle speed max / min 6000
Motorized cutting height
Length of insertion table mm 2000
Feed rate max. M / min 35
More technical information / hide
Lower spindles 2
Right spindle 1
Left spindle 1
Upper spindles 2
Spindle diameter mm 40
Main motor kW 11
Leveling offset to the base
Separate motor for spindle yes
Lubrication pump Automatic
Upper pressure pneumatic yes
Infinitely variable flow
Feedrate kW 4
CE mark yes
Area min. width / height mm 6000x2200x1700
1992
Price  
  PL   request
121016207 1102

ELIN R200/L6 for sale
Electric motors


Elin motor 22KW 970RPM

 
Elin motor 22KW 970RPM
 
Price  
    request
121004600 103

CINCINNATI CNC Hydrotel Milling Machine for sale
CNC Milling Machines


48" x 168" Cincinnati 3-Axis CNC Horizontal Geared Head Traveling Column type Hydrotel Milling Machine with Heavy Angle Bracket, Re:24386 Table dims: Length 168.0" Width 48.0" Vertical travel 52.0" Additional f ...

 
48" x 168" Cincinnati 3-Axis CNC Horizontal Geared Head Traveling Column type Hydrotel
Milling Machine with Heavy Angle Bracket, Re:24386


Table dims:
Length 168.0"
Width 48.0"

Vertical travel 52.0"
Additional for parking 16.0"

Height spindle center to table top:
max 74.0"
min 2.0"

Spindle rpm range 0 to 1,600 rpm
Feed speed range 0 to 180"/minute
Ram drive unit ratio 28.04 to 1
Cross adjustment of spindle carrier 18.0"
Max height center of overarm spindle in horizontal position to table 92.750"
Max height of face of overarm spindle?to table top 82.0"
Max distance horizontal spindle to outer?edge of table 62.125"
Taper in horizontal spindle NMTB50
Height table top to floor 33.750"
Maximum swivel of vertical overarm spindle 360º
Main drive motor 50.0 hp
Hydraulic power unit motor 20.0 hp

Overall dimensions w/o overarm attachment:
Length 416.5"
Width 158.7"
Height 179.0"

Overall dimensions with overarm attachment:
Length 416.5"
Width 173.7"
Height 179.0"

Various weights:
Column 6,670.0 lbs
Column counter weight 8,950.0 lbs
Angle Bracket:
Lower 10,665.0 lbs
Upper 7,180.0 lbs
Front bed 2,190.0 lbs
Rear bed 14,620.0 lbs
Saddle 5,980.0 lbs
Spindle column 2,730.0 lbs
Machine Net weight (approx) 110,000.0 lbs

Equipped with: ?
• GE Fanuc Alpha Series Servo Drive 16-M Controls
X-axis A30/1200
Y-axis A30/1200
Z-axis A22/2000
• QES 1500 Progressive & Interface Units
• Industrial LCD Monitor
• GLEE 17C2 Series
• 5 H.P. independently motorized vertical overarm attachment with 360° swivel
• Trabo Lube System
• (2) Double 12" Chip Conveyors
• Electrics 460/3/60

Still installed at a NorthEast USA Plant Site, this machine is in good working condition and may be inspected running under power.
 
Price  
  US   request
120987682 106

Dango & Dienenthal MSM 1400 for sale
Hydraulic Forging Presses


This is an 85 tonne Mobile Forging Manipulator new in the early 2000's Carrying capacity 850.0 kN (85.0 t) Tongs moment 1,700.0 kNm (170.0 tm) Technical data: Manipulator Abilities: Weight load max (for hot fo ...
used machine
 
This is an 85 tonne Mobile Forging Manipulator new in the early 2000's
Carrying capacity 850.0 kN (85.0 t)
Tongs moment 1,700.0 kNm (170.0 tm)

Technical data:
Manipulator Abilities:
Weight load max (for hot forgings) 850.0 kN
Weight load nom. 700.0 kN
Load moment max (for hot forgings) 1,700.0 kNm
Load moment nom 1,400.0 kNm
Max moment for front wheel 3,443.0 kNm
Wheel Pressure with nom. load, max front wheel 4 x 65665 kg
Wheel Pressure without load, max rear wheel 2 x 61250 kg
Stability moment, approx. 8,089.0 kNm
Stability factor 2.35

Dimensions of Manipulator:
Overall Length 11.352 m
Overall Height min/max 6.731 m
Overall Width 6.42 m
Min. turning radius around the rear edge of machine 8.766 m
Total Weight (exclud. ext. arms and energy supply) 248.0 t

Parameters of tongs and rotation drive:
Max. Clamp-able circle 2000.0 mm
Max. Clamp-able square 1698.0 mm
Minimum clamp-able circle and square 446.0 mm
Opening and closing speed of tongs 130/90.0 mm/s
Turning diameter of max. Opening of tongs 3,083.0 mm
Lowest distance of tongs from rail height 1,400.0 mm
Displacement/movement distance of vertical height 2,000.0 mm
Displacement/movement speed of vertical height 100.0 mm/s
Torque of tongs 180.0 kNm
Speed tongs rotation 12 rpm
Speed of elevation and depression 1.5 ?/s
Horizontal left and right displacement/movement distance ±300.0 mm
Speed of horizontal movement 80.0 mm/s
Travelling distance of vertical hydraulic cushion/damping 200.0 mm
Clamping depth of plier 844.0 mm
Opening and closing dimensions for inserting parts with claws/extension arms 0 – 4000.0 mm

Travelling drive:
Running speed with load 60.0 m/min

Hydraulic equipment:
Working pressure of system 20 mPa
Total output power 500.0 kW
Main motor 3 x 160.0 Kw
Hydraulic oil cooling 20.0 kW
Voltage for main motor 380±10% V
Control voltage 220±10% V
Frequency 50±10% Hz

Design: ?
• The main frame is a sturdy welded steel construction of structural shapes, plates and forgings.
• The tongs carrier consists of the rotating peel supported in roller bearings, the gripping tongs mounted to the front of the rotating peel, the tongs cylinder installed in the rotating peel, and the hydraulically operated rotation gear with break.
• The piston rods of the hydraulic cylinders are ground and hard-chromium plated
• The rear wheel is driven by hydraulic motors and a transmission gear
• The high-pressure hydraulic pumps supply the pressure oil for all manipulator movements such as traveling, rotating, steering, lifting, lowering, tilting, side-shifting, opening and closing of tongs.
• Tongs clamping force is maintained by a hydraulic accumulator
• An air/oil cooler with high cooling capacity and additional oil heating system ensures adequate temperatures
• Central lubrication system: Lubrication points combined to distributors, provided for lubrication by a manually operated grease gun.
• Electric motors in I.E.C. design
• Electric motors suitable for connection to three-phase A.C. 400V, 50 Hz
• Control Voltage for 220V, 50 Hz
• Supply voltage for solenoid valves 24 V D.C.
2004
Price  
  US   request
120987681 106

JSW TMA-40 EO for sale
Hydraulic Forging Presses


Carrying capacity 40.0 metric tons 44.0 US tons Clamping moment 75.0 meter tons Tongs opening range for rounds w/o inserts: max 1,700.0 mm 72.8" min 400.0 mm 15.7" Tongs opening range for rounds with inserts: max 4 ...
used machine
 
Carrying capacity 40.0 metric tons 44.0 US tons
Clamping moment 75.0 meter tons
Tongs opening range for rounds w/o inserts:
max 1,700.0 mm 72.8"
min 400.0 mm 15.7"
Tongs opening range for rounds with inserts:
max 400.0 mm 15.7"
min 200.0 mm 7.9"
Max turning circle of opening tongs 2,400.0 mm 94.5"
Min tongs center height above rails 1,500.0 mm 59.0"
Vertical stroke of tongs parallel to floor 1,100.0 mm 43.3"
Vertical tilting angle of tongs 7º 7º
Horizontal side shift of tongs ±250.0 mm ±9.8"
Center rail distance 4,000.0 mm 157.5"
Speeds:
forging 0 to 30.0 mtrs/min 0 to 98.4 fpm
traveling 0 to 40.0 mtrs/min 0 to 131.2 fpm
turning of tongs 0 to 15.0 rpm 0 to 15.0 rpm
lifting ald lowering of tongs (complete stroke) 90.0 mm/sec 3.5 in/sec
clamping of tongs (complete stroke) 60.0 mm/sec 2.4 in/sec
Total installed electrical power 400.0 kW 536.4 hp
Total delivery of main pumps 700.0 liters/min 184.9 gal/min
Travel distance 20.0 meters 65.6 feet
Weight on rails (approx) 280,000.o kgs 616,000.0 lbs

Complete with:
• (4) Rexroth Oil Hydraulic Variable Displacement Axial Plunger type pumps
Rexroth Oil Hydraulic pumps rated at 130L/min
• (4) 55kW (74hp) 440V motors each driving a Rexroth pump
• Hydraulic System also includes (1) Pilot Pump and (2) Boost Pumps
• Lubrication system
• Mitsubishi Electrical system and controls
• Track Rails
• All essential items
1978
Price  
  US   request
120987603 502

PAAL Konti 325C/K wit DIESEL engine for sale
Channel baling presses


Technical specification Max. pressure: 80 tons Year of production: 1995 Unit pressure: 103 tons/m² Number of strappings: 4 - fold vertical 3 - fold horizontally Cross-section of the channel: 750 x 1100 mm Filli ...
used machine
 
Technical specification
Max. pressure: 80 tons
Year of production: 1995
Unit pressure: 103 tons/m²
Number of strappings: 4 - fold vertical 3 - fold horizontally
Cross-section of the channel: 750 x 1100 mm
Filling inlet: 1020 x 1750 mm
Bale weight: 525-725 kg
Weight: ca. 31 tons
Supply: 400 V and Diesel engine
Bale tying: automatic, wire
Power Supply: 45 + 30 kW (2 hydraulic pumps driven by diesel engine)
29 kW (Power supply for other electrical devices and control)


Englisch - Ewelina Pekala +48 696 072 985
Deutsch - Ewelina Pekala +48 696 072 985
Polnisch – Ryszard £uba +48 501 330 786
Russisch – Alina Hykava +48 795 135 939
1995
Price  
  PL   request
120987593 1101

MTU MDE ME3066 MB3066 for sale


Gas motor MTU MDE ME3066 MB3066 swap motor 170/190 kW Exchange machine We offer a replacement engine from MTU (MDE) both natural gas and biogas. Machine is prepared according to manufacturer guidelines. 1 year w ...

 
Gas motor MTU MDE ME3066 MB3066 swap motor 170/190 kW

Exchange machine

We offer a replacement engine from MTU (MDE) both natural gas and biogas. Machine is prepared according to manufacturer guidelines.

1 year warranty - a training installation, as well as motor and CHP optional services.

Please contact us for a written offer.

We can prepare even more Exchange engines (ME3042, MB3042) as well as AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MTU MDE CHP in stock. We like to submit an offer.
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country