british flag
Resale Logo

ELA used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information Machinery, tools and accessories  Pagus Maschinenhandel NL Jena  http://www.pagus.eu 
banner logo
start page > keywords ELA > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465350 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125460797 101

EMCO MC 1200 for sale
Machining Center - Vertical


x-travel: 1.200 mmy-travel: 600 mmz-travel: 600 mmControl: TNC 620 HeidenhainMain spindle:: turning speed range - main spindle: 50 - 10.000 min/-1power capacity - main spindel: 25 kWmax. Torque: 70 Nmtool taper: SK 40 d ...
used machine
 
x-travel: 1.200 mm
y-travel: 600 mm
z-travel: 600 mm
Control: TNC 620 Heidenhain
Main spindle::
turning speed range - main spindle: 50 - 10.000 min/-1
power capacity - main spindel: 25 kW
max. Torque: 70 Nm
tool taper: SK 40
distance spindle nose and table: 120 - 720 mm
work table::
table surface area: 1.400 x 650 mm
number of T-slots: 5
T-slot - width: 18 H8 mm
tool magazin::
number of toolpositions: 30 pos.
tool taper: SK 40
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 125 mm
max. tool length: 280 mm
max. tool weight: 8,0 kg
max. total weight: 100 kg
tool changing time: 1,6 sec
feeds::
rapid traverse: 40 m/min
feed speeds: 20.000 mm/min
Accelaration: 5 m/s²
feed power: 5,8 kN
total power requirement: 35 kVA
weight of the machine ca.: 7,7 t
dimensions of the machine ca.: 5,0 x 4,0 x 3,2 m
Documents:
Chip conveyor:
Coolantsystem:
high pressure coolant: 30 bar
through spindle coolant:
paper band filter:
interface 4. axis:
4. axis: defekt / defect
Automatic Tool Changer:
elektr. hand wheel:
CNC - Machiningcenter Vertical
EMCO - MC 1200

- only ca. 4.900h Spindle-Runtime



This ad was created with MODUL MWS - the software solution of LogoTech.
2011
Price  
    request
125465341 2404

MOBIL-KRANWAGEN ÖAF Gräf & Stift for sale


last off Code: BH-82028 First registration: 17.07.1981 FIN: 6970353 elapsed. Mileage: 397.141 km power: 285 kW Displacement: 12.763 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to &A ...

 
last off Code: BH-82028
First registration: 17.07.1981

FIN: 6970353
elapsed. Mileage: 397.141 km power: 285 kW
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 20-320 G6-LTMF1
Equity / total weight: 23.050/23,400 kg
Color: grey
Equipment: Cloth - and leather interior with rear-mounted on Liebherr crane cab model LTMF1030V, serial number. 0011621, YEAR 1981
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, v-belts, hydraulic blower leaking, MA oil loss, Wishbone broken MA, VA pushrod defective, Luftpresser poor performance, articulated wheel rim on several points touched on, lights broken heater is to examine, hydraulic pump leak, leakage of crane hydraulics, various paint damage all-round vehicle as well as dents and rust, holes with rust spots behind passenger door front right,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0041 and 3950-0-400-0199
 
Price  
    request
125460770 103

HEIDENREICH & HARBECK 60 HS for sale
Bevel Gear Shaping Machine


min/max. wheel diameter at ratio = 1:10: 25 / 600 mmgear width: 0-90 mmmodule max. spur toothing: 2 - 10 min/max. pitch cone angle: 5 - 90 °tooth length: 90 mmstroke: 0 - 100 mmweight of the machine ca.: 5,9 ttotal powe ...
used machine
 
min/max. wheel diameter at ratio = 1:10: 25 / 600 mm
gear width: 0-90 mm
module max. spur toothing: 2 - 10
min/max. pitch cone angle: 5 - 90 °
tooth length: 90 mm
stroke: 0 - 100 mm
weight of the machine ca.: 5,9 t
total power requirement: 7,2 kW
Top conditio, many accessories.
video link:
http://www.youtube.com/watch?v=y4E3FieGXoM&feature=related
http://www.youtube.com/watch?v=QlacNzommrI&feature=related
http://www.youtube.com/watch?v=Q2kScCXkZFU


This ad was created with MODUL MWS - the software solution of LogoTech.
1962
Price  
    request
125465335 2422

LKW ÖAF Gräf & Stift 20320G2 for sale


last off Code: BH-79040 Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer elapsed. Mileage: 132.490 km : KW 235 Displacement: 12.763 cc Test badge: no inspection sticke ...

 
last off Code: BH-79040
Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer
elapsed. Mileage: 132.490 km
: KW 235
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 6970040
Equity / total weight: 12,900/22,000 kg
Number of seats: 2 in driver's cab
Equipment: material facilities, with rear mounted plane
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, loss of fuel, exhaust system strongly div. rubber bearings for axles and Wishbone rusted, porous, Doppelrollgelenke VA game Achsschenkel have right and left vertical game, compressed air brake system heavily leaking, div. Compressed air hoses porous, brake master cylinder leaking, different steering knuckle heads have Heckzellonen have game, faulty, battery jump, frame, springs and shock absorbers are rusted, missing parts of front, div. parts probably spare parts dispensers, vehicle not ready to go, rust all-round vehicle div. paint damage, paint differences, is pointed out expressly that no complete inventory and check the functionality of the auction object was performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-410-0037
 
Price  
    request
125460445 1900

Workbench with Base Structure


Weight approx.: 180 kgDimensions (l x w x h) approx.: 2000 x 700 x 840 mmDescription: With solid wooden plate 2000 x 700 mm, base made of 2 elements, with drawers and double doors, contents: pliers, open-end wrench, ring ...

 
Weight approx.: 180 kg
Dimensions (l x w x h) approx.: 2000 x 700 x 840 mm
Description: With solid wooden plate 2000 x 700 mm, base made of 2 elements, with drawers and double doors, contents: pliers, open-end wrench, ring spanner, files, hammers, SIEMENS plug-in relays, for further details see photos
 
used machinery auction RESALE 105 €  
  DE   request
125465330 2486

PKW M1) VW Golf for sale


last off Code: BH-67005 Matriculation year: 11.04.2006 elapsed. Mileage: not readable Power: 74 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a ...

 
last off Code: BH-67005
Matriculation year: 11.04.2006
elapsed. Mileage: not readable
Power: 74 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1J/ACAXRX0/FM5FM52J067N1N1
FIN: WVWZZZ1JZ6W018023
Equity / total weight: 1,353/1.900 kg
Color: white
Body: hatchback
Equipment: 5-speed manual transmission, CD player, fabric outfit, Electr. Power Windows front and rear, roof rails with special transport lamps design
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: rusted exhaust main silencer hull rusted through, easily leaking charge pressure control valve, coupling on the wear limit, div. axle and suspension parts wheel bearing rusted, broken front, grease with Tracking joint sleeve, starter motor running after frame has oxidation, rusted Springs, camber plates left front damaged, battery deep probably emptied or defective, purchased to cover on seats already by worn, rusty spots on hood and front Wheel arches, abrasions at front apron, small dents at wheel arches front right with rust spots, abrasions in the rear apron and loading area for tailgate, sticker residue, abrasions at front bumper front left,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2310-0-200-0310 and 2310-0-550-0194
 
Price  
    request
125456675 702

W&P Baguettelangwirkmaschine for sale
baguette-moulder, prod. W&P, type B750 incl. pr


cap. 900 - 1200 pcs./h, doughweightrange 50 - 2000 g \r\nmoulding-lenght up to 750 mm\r\nmoveable proofer include 28 proofing frames

 
cap. 900 - 1200 pcs./h, doughweightrange 50 - 2000 g \r\nmoulding-lenght up to 750 mm\r\nmoveable proofer include 28 proofing frames
 
Price  
    request
125465328 2479

PKW M1) Ford Bus Vario FT330 85 for sale


last off Code: BH-66701 Matriculation year: 24.01.2007 elapsed. Mileage: 135.903 km Power: 85 kW Displacement: 2.402 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-66701
Matriculation year: 24.01.2007
elapsed. Mileage: 135.903 km
Power: 85 kW
Displacement: 2.402 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: FDC6TRANSIT/TURNEO/JXFA2B/D9CCA
FIN: WF0SXXTTFS6G34663
Equity / total weight: 2,044/3,330 kg
Color: Blue
Body: Sedan
Number of seats: 9
Equipment: 6-speed manual transmission, radio, Electr. Window regulator front
Documentation: types of licence available
Key: 1
Comments to the State: oil leak at crank shaft sealing ring, injector leaking, div. Anrostungen on all axle parts, brake discs and pads are 1 cylinder renewed, is steering leak, various rusty Anrostungen on main and auxiliary frame, springs and shock absorbers,. Passenger seat cover, expanded storage space, manufacturer emblems bleached out, gall at hood, rust spots on steel rims,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
Asset number: 2310-41-000-3765 und2310-0-550-0283
 
Price  
    request
125456973 702

Gebäckfüllmaschine (Dosierkolben) for sale
filling machine for Berliner/donuts


attachement: 1 piston, filling variabel 5 - 10 g\r\n hopper ca. 1,5 kg marmelade

 
attachement: 1 piston, filling variabel 5 - 10 g\r\n hopper ca. 1,5 kg marmelade
 
Price  
    request
125465323 2422

LKW N3) ÖAF Gräf & Stift 19-281 F for sale


last off Code: BH-83589 Matriculation year: 19.10.1988 elapsed. Mileage: 105.118 km : KW 206 Displacement: 11,413 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, aut ...

 
last off Code: BH-83589
Matriculation year: 19.10.1988
elapsed. Mileage: 105.118 km
: KW 206
Displacement: 11,413 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: VAO505A278F004826
Equity / total weight: 9.930/18,000 kg
Color: grey
Construction: Open box
Number of seats: 3
Equipment: Gearbox, fitted tarp, rear
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, cold start Device defective, strong noise, probably massive gearbox bearing failure, stabilizer of defective rear wheel hub left front leak, air pressure er performance poorly, rusted frame , Spring cushion and Sling have game, div. differences in colour varnish, sticker residue, prov. Repainting, abrasions all around vehicle, abrasions at front bumper, div. Rust all around vehicle,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0046
 
Price  
    request
125456981 702

KEMPER Baguettelangwirkmaschine for sale
baguette-moulder, fabr. Kemper, type BW FR COMBI


cap. 900 - 1200 pcs./h, 3000 pcs. a 150 g\r\n1000 pcs. a 1000 g, doughweightrange 50 - 2000 g \r\nmoulding-lenght up to 750 mm (estimation)\r\n

 
cap. 900 - 1200 pcs./h, 3000 pcs. a 150 g\r\n1000 pcs. a 1000 g, doughweightrange 50 - 2000 g \r\nmoulding-lenght up to 750 mm (estimation)\r\n
 
Price  
    request
125465317 2486

PKW M1) VW Golf for sale


last off Code: BH-67262 Matriculation year: 15.12.2008 elapsed. Mileage: 264.010 km Power: 77 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-67262
Matriculation year: 15.12.2008
elapsed. Mileage: 264.010 km
Power: 77 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1KM / ACBLSX0/FM5FM5A4009N7GGN1
FIN: WVWZZZ1KZ9M289084
Equity / total weight: 1.361/1,990 kg
Color: Blue
Body: hatchback
Equipment: material facilities, 5-speed manual transmission, Electr. Power Windows front and rear, trip computer, air conditioning, roof rails colour: black
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: scratches and rust spots at hood, paint damage on front bumper right front, abrasions wheel box left rear;
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
Asset number: 2310-12-384-6284 and 2310-41-000-8564
 
Price  
    request
125456495 702

JUFEBA Sprühautomat für Aprikotur for sale
spraying device for marmelade, fabr. Jufeba.type G


product - quantity variable, manuell spraying

 
product - quantity variable, manuell spraying
 
Price  
    request
125465310 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125456765 702

Edelstahl-Behälter mit Rührwerk u. Pumpe for sale
mixing machine, stainless steel, incl. agitator +


machine was used for mixing marmelade with water\r\n1. measuring probe: filling height marmelade \r\n2..measuring probe: filling height water\r\n\r\noperation\r\nfill tank with marmelade up to the 1. measuring probe then ...

 
machine was used for mixing marmelade with water\r\n1. measuring probe: filling height marmelade \r\n2..measuring probe: filling height water\r\n\r\noperation\r\nfill tank with marmelade up to the 1. measuring probe then\r\nfill tank with water up to the 2. measuring probe, pump \r\ndelivers product in circulation until mixture is ready
 
Price  
    request
125465306 2419

SPEZIALKRAFTWAGEN N1) VW Hochraum-Kasten Allrad for sale


last off Code: BH-70539 Matriculation year: 26.09.1989 elapsed. Mileage: 82.060 km Output: 51 kW Displacement: 1,588 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-70539
Matriculation year: 26.09.1989
elapsed. Mileage: 82.060 km
Output: 51 kW
Displacement: 1,588 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 251/4WD bra
FIN: WV2ZZZ25ZLG114504
Equity / total weight: 2,060/2,600 kg
Color: Green
Construction: closed
Number of seats: 3
Equipment: material equipment, cassette player, 4-speed manual transmission, all-wheel drive
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, exhaust manifold and gasket defective, gearbox leaking, clutch on the wear limit, intermediate gear leaking axle parts div. porous suspension rubbers, rear wheel bearing play, brake rusted, front discs and pads damaged, partially rusted brake line, steering gear easily leak, starter broken, heating and fresh air controller Anrostungen in frame, fenders and shock absorbers, rust spots at windscreen dawned, front left, differences in colour varnish, div. prov. Repainting, sticker residue, is pointed out explicitly that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-300-0132 and 2320-0-550-0083
 
Price  
    request
125456831 702

Gebäckfüllmaschine (Dosierkolben) for sale
filling machine for Berliner/donuts


attachement: 1 piston, filling variabel 5 - 10 g\r\n stainless steel hopper approx. 1,5 kg marmelade\r\n

 
attachement: 1 piston, filling variabel 5 - 10 g\r\n stainless steel hopper approx. 1,5 kg marmelade\r\n
 
Price  
    request
125465304 2419

SPEZIALKRAFTWAGEN N1) VW Hochraum-Kasten Allrad for sale


last off Code: BH-70507 First registration: 01.04.1992 elapsed. Mileage: 115.698 km Output: 51 kW Displacement: 1,588 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, ...

 
last off Code: BH-70507
First registration: 01.04.1992
elapsed. Mileage: 115.698 km
Output: 51 kW
Displacement: 1,588 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 251/4WD bra
FIN: WV2ZZZ25ZLG114490
Equity / total weight: 2,060/2,600 kg
Color: Green
Construction: closed
Number of seats: 3 (front)
Facilities: 4-speed manual transmission, manual window regulator front, all-wheel drive
Documentation: types of licence available
Key: 1
Comments to the State: clutch faulty, glow candles defective (stabilizer rubber cracked), drive shaft sleeves front left and right torn, brake discs front brake line run, behind rusty, slightly dented side door, sliding door and right,. Front slightly dented bumper, dented corner rear left, side panel rear left scratched, dent on passenger door and gutter, entry front left rusted through, fender of rear left rusted through, div. differences in colour paint, dents and abrasions all-round vehicle.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-300-0132 und2320-0-550-0083
 
Price  
    request
125451923 109

HILGELAND CH3LA for sale
double blow header


diameter range 5-10 mmshaft length under head 10-150 mmmax. cut-off length 180 mmoutput pieces/min 100
used machine
 
diameter range 5-10 mm
shaft length under head 10-150 mm
max. cut-off length 180 mm
output pieces/min 100

1976
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More ELA models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Grinding Machine DELAPENA SPEEDHONE EM


Working diameter: 1.143-79.375mm, spindle speed: 200-2500/min, motor power: 1.5kW, stroke length: 0-150mm, stroke speed: 60-350double strokes/min, stroke motor power: 0.37kW, length: 1210mm, width: 1210mm, height: 1680mm, weight: 225kg.

Metal detector Gelan Safeline


Product number: 1260 Serial number: 8282 Year of construction: 1994 Belt width: 345 mm Passage: 400 x 230 mm Dimensions: 1640 x 1250 x 1200 mm With reject (pusher)

Injector Belam MI-402-9/93


Condition: Used Technical data: • overall dimensions 1663x1560x2130 mm; • power supply 8.5 kW; • power supply 400 V; • all stainless steel; • 93 needles in 6 rows 3x15 and 3x16; • conveyor width 400 mm; • working height 250 mm; • weight 1060 kg.

CNC Milling Machines DECKEL MAHO DMU 50M


DECKEL MAHO DMU 50 m 5 axis cnc milling machine The DECKEL MAHO DMU 50 m 5-axis cnc milling machine is a small-scale 5-axis milling machine; the strokes X 500, Y 400, with 400 mm, year of construction 1999, CE standards, with CNC HEIDENHAIN TNC 310 m, iso 40 spindle with 4.500 revolutions and optical lines. It has 3 axes controlled and interpolated to CNC while the 2 rotary axis of the table are manually operated by means of special mechanical handwheels and the relative dimensions are shown on the control display; reconditioned exercise machine. The DECKEL DMU 50 m 5-axis cnc milling machine is a CNC machine particularly suitable for general machining of medium/small dimensions, such as in the tooling sector, molds, a motorcycle parts; especially for the milling of light alloys and is particularly known in the industry for its build quality, precision and versatility thanks to the possibility of being used also in manual thanks to the presence of the special leaflets, both for the 2 rotary axes ( mechanical) and for the 3 linear (electronic).

Metal detector Gelan/Safeline Safeline


Product number: 1259 Serial number: 13432 Year of construction: 1995 Belt width: 350 mm Passage: 400 x 155 mm Dimensions: 1380 x 1330 x 1120 mm With reject (pusher)

Jackstone


Jacckstene vertical plate freezers.Details:Brand: Jackstone;Number of stations: 20 ;Number of blocks: 40Block size: 530 x 100 x 520 mm (L x W x H);Freezer dimensions: 3450 x 1600 x 1880 mm (L x W x H);Used refubrished in very good condition. Czamara company has more refrigeration Equipment in stock. If your firm is inerested in buying refrigeration machines check our website: sklep.czamara.net.pl and contact us. In stock we have branded equipment e.g. Bitzer, Copeland, Carrier, Gram, Gea, Lu-ve, Dorin, Güntner.

SANFOR CIBITEX SANFORISER


CIBITEX SANFOR, 2.000 MM WORKING WIDTH. YEAR 1986 - HIGH ENTRANCE WITH STEAMING DRUM - SHRINKING UNIT, RUBBER BELT WIDTH 2.100 MM (CYLINDER WIDTH 2.200 MM) - PALMER FOR FIXATION, DIAMETER 2.000 MM, FELT WIDTH 2.250 (CYLINDER WIDTH 2.400 MM) - EXIT BY A-FRAME BATCHER SPARES INCLUDED WITH THE MACHINE: RUBBER BELT, BLANKET FOR THE PALMER, CONVEYOR BELT FOR RELAXATION RUBBER BELT GRINDING DEVICE

Compressors Bitzer 6H-25.2Y


Semi-hermetic reciprocating compressors Bitzer 6H-25.2Y. Capacity: 110m3/h Price: on request Used refubrished in very good condition. Czamara company has more refrigeration Equipment in stock. If your firm is inerested in buying refrigeration machines check our website: sklep.czamara.net.pl and contact us. In stock we have branded equipment e.g. Bitzer, Copeland, Carrier, Gram, Gea, Lu-ve, Dorin, Güntner.

Xenon Fade-Ometer Atlas Ci3000+


4500 W vodou chladená xenónová oblúková lampa Celková expozícia 2 188 cm2 (339 in2) TFT farebný 12 "dotykový displej ovládacieho panela zobrazuje všetky testovacie parametre Priame nastavenie a ovládanie teploty ?ierneho panelu; neizolované (BPT) alebo izolované (BST) Priame nastavenie a regulácia relatívnej vlhkosti Priame nastavenie a riadenie teploty vzduchu v komore vzorky Zobrazenie diagnostických správ 14 výrobných predprogramovaných testovacích metód (Weather-Ometer); 6 výrobných predprogramovaných testovacích metód (Fade-Ometer) Priestor pre 12 vlastných programov; schopnos? sub-cyklu Viacjazy?né schopnosti (angli?tina, francúzština, nem?ina, španiel?ina, japon?ina, ?ínština, kórej?ina, ture?tina) Streamovanie dátových dát cez ethernet alebo USB port. Sú?as?ou balenia je aj USB disk SmartDamperTM na zníženie testovacej variability teploty a vlhkosti komory a kompenzuje zmeny okolitých laboratórnych podmienok SmartLight MonitorTM overí, ?i je nainštalovaná správna svetelná kapsula K dispozícii sú kombinácie filtrov, ktoré sp??ajú všetky bežné testovacie metódy Vzduchový filter na nasávanie vzduchu CS-7 chladiaci systém xenónovej lampy Obrazové okno pre posedenie vo dverách Univerzálne elektrické konfigurácie na splnenie miestnych požiadaviek na frekvenciu, napätie a elektrické požiadavky Sp??a bezpe?nostné požiadavky CE, UL, ISO EN a CSA Automatické odpo?ítavanie testov na základe ?asu alebo sálavého ožiarenia Systém zvlh?ovania VibraSonic ™ K dispozícii sú držiaky vzoriek, ktoré vyhovujú mnohým typom vzoriek Kalibrovaná xenónová referen?ná lampa Indikátor ?istoty vody

Tool-Grinding Machines DELAPENA Speedhome EM


OVERVIEW: Brand: DELAPENA Model: Speedhone EM Application type: Honing Machine type: Honing Machine Availability: Immediately Construction year: 2011 Production hours: 4000 Location: Germany Origin country: United Kingdom MAIN DRIVE: Spindle speed range: 200-2500 1/min MEDIA: Power consumption: 2 kW Internal cooling: yes

Combi-machines Brev.Celaschi


Auction name: Machines, rolling stock and building materials in Amsterdam Online auction Start of auction: 25 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 08 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is ...

Fish processing machines KM Machinery Mark 5 Gutting machine for whitefish


KM Machinery Mark 5 Gutting machine for cod, saithe, haddock whiting and hake Mark 5 Fish Gutting Machine elaborated for gutting fish such as cod, saithe, haddock, whiting and hake on board trawlers as well as in land-based factories. The fish are plac ...

High-Pressure PU Mixing and Metering System BASF / ELASTOGRAN Puromat PU 80 QS


Material: polyurethane/ isocyanate.

Switchgear Holec SVS 17,5kV 800Amp Holec Eaton Switchgear SVS 17,5kV 800Amp


We have for sale: 1 Holec SVS switchgeaar 17,5kV 800Amp busbar 3 motorized breaker feeders with Stucke protection relays 1 x fused loadbreak switch

Switchgear Holec SVS 12kV 800Amp Holec Eaton Switchgear SVS 12kV 800Amp


We have for sale: 1 Holec Switchgear Type SVS 12kV 800Amp 1 incoming Loadbreak switch feeder 3 outgoing breaker feeders with protection relay 1 outgoing loadbreak switch

Heidelberg PM52-2


HEIDELBERG PM52-2(36 x 52cm), Age c.2004, serial no.RS.000223, circa 34 million, CP tronic, Alcolor, Autoplate, Baldwin Basic Liner recirculation/refrigeration, Electronic sidelays, Lazer cut ink ducts, Mediprint T-Tech powder spray, Plus version, Progra ...

Further processing machines Heidelberg SB Cylinder


Serial number 21177 Size 540 x 770mm Converted to cutting and creasing Front suction feeder Left and right sidelays Spare delivery trollies Sword style delivery

Chillers York YLAE


Cooling capacity: 170 kW Year of manufacture: 2006 Refrigerant circuit: 2 pieces Freon: R410A Compressors: 4 pcs. Copeland (scroll) Number of fans: 4 pcs. Dimensions: 2,5 ? 2,25 ? 2,2 m Weight: 2000 kg One compressor is broken, but we have a repla ...

Edge gluing machines SCM OLIMPIC SE 215 - ERN


Code: 0305 Brand: SCM Model: OLIMPIC SE 215 - ERN - CE Standard Automatic edge bander for application of wood edges, Veneer, Abs, Melaminic, Pvc, and other materials - CE Standard - Year 2004 Technical data : Panel height mm 10/60 Max edge  ...

TEACH LATHE CMT SUPERONE 400 WITH ECS CNC CMT SUPERONE 400


HEIGHT 420 mm DISTANCE BETWEEN CENTER 2000 mm LONG HORSE ON BENCH 800 mm ABOUT LONG HORSE CARRIAGE 500 mm BAR PASSAGE 143 mm SELF DIAMETER 500 mm DIAMETER TERMINAL PLATFORM 4 630 mm TOWER IN 4 POSITIONS ALGRAMOD TGA 350 RELATED PRODUCTS

Gear Hobbing Machines VITEBSK 53B30P


Manufactured by Vitebsk(Belarus) Year of manufacture 1992 Max. work piece diameter, mm 320 Min. work piece diameter, mm 20 Module 6 Max. angle of inclination of the cut teeth, degrees 60 Max. width of processed gears, mm 220 Table diameter, mm 250  ...

Edge gluing machines HOLZHER SPRINT 1310 - 4


Code: 0270 Brand: HOLZHER Model: SPRINT 1310 - 4 - CE Standard Automatic edge bander for wood edges, veneer, solid wood, PVC, ABS, and melaminic Technical data : Glue application system with cartridge Gluing unit End cutting unit Trim ...

CESAB Diesel forklift 7000 kg. CESAB SID/P 70.1


CESAB Diesel forklift 7000 kg. Mod.SID/P 70.1 Forks height m.4,20 Tires conditions 90/100 type Superelastica Front and side ligths Good working conditions

Directional Over Current Relay Woodward XRI1I5R4


Supplied by SEG Power Protection Brand new. Available immediately.

Winding machines satex omm D


NUMBER 6 POSITIONS PERFECT FOR ELASTAN YARN BIG BOBIN UNTIL 6/8 KG ACCESSORIES SENSOR BRTS YEAR 2014 NEW MACHINES PERFECT RUNNING CONDICITONS

High-Pressure PU Mixing and Metering System BASF / ELASTOGRAN Puromat 150


Max. mixing head hydraulics output: 75l/min, max. dosing output polyol/ isocyanat: 2500g/s, viscosity: 850mPas, polyol/ isocyanat output: 75l/min at 1500r/min, compressed air supply: 3bar, compressed air consumption: 300Nl/min max., connected load: 65kW,  ...

Vertical Numerically Controlled Machining Centres Deckel Maho DMU 80 T – 5 Axis


Make: Deckel Maho Model: DMU 80 T – 5 Axis Machining Centre Condition: Used Machine type: Mill Location of machine: Ireland Machine Details Heidenhain TNC 426 /430M control 5-axis simultaneous X/Y/Z 880/630/630 mm Clamping surface – 1250 ...

Harrison Alpha 550S


Make: Harrison Model: Alpha 550S Condition: Used Machine type: Lathe Location of machine: Ireland Machine Details Height of centres 280mm Distance between centres 2000mm Swing over bed 554mm Swing over cross slide 370mm Swing in gap 830mm ...

CHILLER SYSTEM AERMEC 2 MOTOR


N. 01 CHILLER 2 MOTOR 104,34 MC/H YEAR 1998 N. 01 CHILLER 2 MOTOR 126,09 MC/H YEAR 1998 MOTOR BRAND DWM COPELAND

COLLOIDAL MILL WAB DYNO MILL KD200D


Hard SS vessel Jacket 8 mm Interchangeable sieve in the door Original elastomer coating on stainless steel propeller Power 15 KW

Refrigeration compressors Copeland D6RH1-3500-AWM/D


Model: D6RH1-3500-AWM/D Displacement: 106,5 m3/h Price: on request Used refubrished in very good condition. Czamara company has more refrigeration Equipment in stock. If your firm is inerested in buying refrigeration machines check our website: sk ...

Refrigeration compressors Copeland D6RA4-2000-EWN


Model: D6RA4-2000-EWN Displacement: 84 m3/h Power supply: 400V/3PH/50Hz Price: on request Used refubrished in very good condition. Czamara company has more refrigeration Equipment in stock. If your firm is inerested in buying refrigeration machin ...

Warping machines MENTEGATTO TYPE M 28X21


WARPING MACHINES FOR ELASTAN YARN SYSTEM DERULE' DOUBLE CREEL NUMBER TOTAL POSITIONS 126 RUNNING

Diesel generators Rolls Royce CV12/800KVA


Rolls Royce CV12/800KVA Diesel generator. Free standing in own container. Situated in Northern Ireland.

Metal separators Cabragh Terex Powerscreen


Cabragh skid mounted Terex Powerscreen Screener. Scrap metal cleaner with in-feed, out-feed and side conveyers. Situated in Northern Ireland.

Copex Lidex 800T


Copex Lidex heavy duty ground-based 800ton scrap metal shear. Driven by electric power. Situated in Northern Ireland.

Ryobi 512


Max 365 x 520mm, Stream feeder, left and right sidelays, landscape machine, standard damp system, powder sprayer, speed 11,000SPH, weight 2200kgs

Refrigeration systems Dorin K2500CC-01 (x 2)


Complete refrigeration system equipedd in compresors Copeland K2500CC-01 (x 2), refrigerant reservior, pressure switch HP/LP, filters, oil separator,oil protection. Used refubrished Product number: K2500CC-01 (x 2) Nominal capacity: 93,8 kW (-5 ...

Refrigeration systems Copeland D6RA4 (x 2)


Complete refrigeration system equipedd in compresors Copeland D6RA4 x 2, electrical control panel, refrigerant reservior, pressure switch HP/LP, filters Used refubrished Product number: D6RA4 x 2 Nominal capacity: 100 kW (-5°C/+45°C) Volume flow ...

Warping and beaming machines MAGEBA BSC-24


WARPING DERULE SYSTEM FOR ELASTAM DOUBLE CREEL 900 POS. YEAR 2000 RUNNING

AIR COVERING YARN WITH ELASTAN SSM SWISS DP2C


N. 01 MACHINES 35 POSITIONS AUTODOFFING HEBERLEIN JET FRONT CREEL FINAL BOBIN 290MM YEAR 2000 N. 01 MACHNES 30 POSITIONS AUTODOFFING HEBERLEIN JET SUPERIOR CREEL FINAL BOBIN 290MM YEAR 2001 JET FOR HEBERLEIN CERAMIC TYPE W 40.24 LESS ...

Mazak QT Nexus 100 II M CNC Lathe


Make: Mazak Model: QT Nexus 100 II M Year: 2007 Condition: Used Machine type: Lathe Location of machine: Ireland Control: Mazatrol Matrix Nexus Ancillaries: Bar feed Condition info: Excellent working condition Machine Details Superb machi ...

Daewoo PUMA 230MB


Make: Daewoo Model: PUMA 230MB Year: 2001 Dec Condition: Used Machine type: Lathe Location of machine: Switzeland Ancillaries: With 7 off live tools and an assortment of static tools and tooling, etc. Purchased new in 2003. The seller has aperwor ...

Daewoo PUMA 230MB


Make: Daewoo Model: PUMA 230MB Year: 2001 Dec Condition: Used Machine type: Lathe Location of machine: Switzeland Ancillaries: With 7 off live tools and an assortment of static tools and tooling, etc. Purchased new in 2003. The seller has aperwor ...

Haas SL20 CNC Lathe


Make: Haas Model: SL20 Year: 2006 Condition: Used Machine type: Lathe Location of machine: Ireland Ancillaries: Swarf conveyor, tailstock, presetter Machine Details Superb working condition Haas SL20 CNC Lathe. Machine has: Hyd 3 jaw chu ...

Mazak QT Nexus 100 II M CNC Lathe


Make: Mazak Model: QT Nexus 100 II M Year: 2007 Condition: Used Machine type: Lathe Location of machine: Ireland Control: Mazatrol Matrix Nexus Ancillaries: Bar feed Condition info: Excellent working condition Machine Details Superb machi ...

Heidelberg CD102S+L


HEIDELBERG CD102S+L (72 x 102cm), Age c.1990, serial no.531237, circa 62 million, ONLY 62 mill ( Genuine very low count), CPtronic, CPC1-03, Electronic sidelays, Alcolor, Baldwin recirc/refrig with Balcontrol, Programmable ink/blanket/imp cyl via CP Troni ...

Heidelberg SM74-8P5+L


HEIDELBERG SM74-8P5+L(52 x 74cm), Age c.2000, serial no.625120, circa 164 million, CP2000 Press Control Console, Axis control, Alcolor, Autoplate, Pre-loader on feeder, Preset in feeder, Electronic sidelay, Electro mechanical 2 sheet detector, Technotrans ...

CNC Punching Machines AMADA VELA II


OVERVIEW: Brand: AMADA Model: VELA II Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 1984 Production hours: 80454 Location: Finland Origin country: Japan GENERAL DATA: Measurement ...

Inserting machines ATS ATS CE 240/30


-Automatic banding machine paper tape or transparent polypropylene with a max width of 30 mm. Speed: up to 26 cycles per minute -Hand, foot switch, or automatically - by means of photocells -Electronic temperature control, regolable delay -Trolley wi ...
Find used machinery dealers in your country