used EKU Electric ranges

EKU 750-6-1 6 burner gas stove 39 kW 6 burners 39 kW total power Stand-alone unit W 1200 x D 750 x H 850 mm open substructure More gas stoves in other sizes - new and used - can be found in our shop! International shipping costs on request!

EKU PXL 80M Lava stone grill EKU PXL 80M Lava stone grill Stand-alone unit Height-adjustable stainless steel V-grill grate W 800 x D 750 x H 850 mm 2 heating zones Piezo ignition Substructure open V-rust 17 kW Gas More lava stone crickets in other sizes - new and used - can be found in our shop! International shipping costs on request!

EKU 750-KBE-80 Tilting frying pan Description: Stainless steel housing Sturdily welded rounded corners/edges with manual tilting Walls chrome-nickel steel Crucible 700 x 465 x 200 mm Crucible base 15 mm steel approx. 55 litres Dimensions (width x depth x height): 800 x 750 x 850 mm Power: 9.36 kW Specifications: Current type 3N Voltage: 400 volts Nominal current 12.56 A Frequency 50 Hz Scope of delivery: EKU 750-KBE-80 tilting frying pan Condition: Used More items - new and used - can be found in our shop! International shipping costs on request!

American stove Heartland 6120EC original Stove ran only a short time because of moving to new apartment, it could not mitnehemen, me is unfortunately necessary to separate. Is stored Electric 400V hobs, oven and keep warm compartment New price at 7500 € Appointment for viewing by phone or by mail. When the load is helped. Private sale no returns

Work table with round front edge length 4,0 m fitted with the following devices: CERAN induction stove without oven, hotplates 4 x 3, 5KW inductive Connected load: 400V 14,0 KW electric Grill Pan Pan: 500x500x100mm, content: ca 24 litres

ATTENTION HAMMER PRICE!! ASK FOR YOUR SPECIAL PRICE !!! This is a panini grill from the manufacturer Electrolux, type HSG3RPRP5. This grill combines the heating variants microwave, infrared radiator and contact hot plate. At the end of the program, the lid opens automatically. As a result, each product always has the same quality. The grill plate is approx. 215 x 215 mm in size. It is controlled by 4 programs with a runtime of 30 - 60 seconds. This allows you to toast perfectly and heat the core of your panini at the same time – up to 5x faster than with a conventional device. The device has been tested in our in-house workshop and is fully functional. SpeeDelight is the new professional solution for mobile businesses: an appliance with the unique combination of different cooking techniques. Serve delicious fast food in record time: not just a snack, but an absolute taste experience ...

4 burner hob with oven Manufacturer: Malag Type: 7-401 Device Type: Floor-Standing Burners: 4 burners Power Type: Electric Oven energy type: Electric Nominal voltage: 380 V Nominal consumption: 10.7 kW Stove tops adjustable in 3 steps Electric oven adjustable from 50° to 300°C Body made of high-quality stainless steel In one piece die-cut hermetic hob More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Electric motor, electric motor SIEMENS three-phase motor, power motor type 3LE16012BB233GB4 Type V1 Size 225M Motor speed 1475 rpm. Power consumption 84 Ampere Motor power 45 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 60 mm Shaft spigot length 140 mm Wedge groove width in the shaft 18 mm Flange diameter 450 mm Centering diameter 350 mm Pitch circle 400 mm- Flange motor with 8 mounting holes 18 mm Overall length Motor housing without motor shaft 715 mm Overall length Motor housing with motor shaft 855 mm Space requirement L x W x H 855 x 450 x 570 mm Net weight: 320 kg very good condition - New, unused from stock dissolution; used

Electric motor, electric motor LAMMERS three-phase motor, power motor type 1TZ95012AA434AB4-Z Type B3 Size 200L Motor speed 2960 rpm. Power consumption 54 Ampere Motor power 30 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 55 mm Shaft spigot length 110 mm Wedge groove width in the shaft 16 mm- foot motor with 4 mounting holes 19 mm, hole spacing 315 x 300 mm Overall length Motor housing without motor shaft 620 mm Overall length Motor housing with motor shaft 730 mm Space requirement L x W x H 730 x 400 x 520 mm Net weight: 205 kg very good condition - New, unused from stock dissolution; used

Electric trolley, electric trolley for chain hoist, crane trolley, chassis, rolling trolley for double T-beam STEEL type GU-A035400 Fab.Nr. 0104671 Year of construction 1986 Load capacity approx. 1100 kg Roll diameter approx. 80 mm Track width from 65 mm to 110 mm Travel speed 12.5 m/min Motor power 0.42 kW Mains connection 380 volts, 50 Hz. Weight 20 kg good condition; used

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 48 volts -Power: 8 kW -Speed: 2400 rpm -Output shaft: Ø 30 mm -Drive motor for lifting work platforms from GSL (German Standard Lift) -Number: 1x motors available -Price: per piece -Dimensions: 405/195 mm -Weight: 35 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from a Still forklift -Drive: 24 V 2 kW -Dimensions: 370/500/H350 mm -Weight: 82 kg

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 22 volts -Power: 5.2 KW -Speed: 2800 rpm -Shaft: Ø 28 mm -Number: 2x available -Price: per piece -Dimensions: 290/H230 mm -Weight: 26 kg

Forklift motor, electric motor, DC motor, traction motor, drive motor -Voltage: 75 volts -Power: 6.3 kW -Speed: 1400 rpm -Dimensions: 510/320/H280 mm -Weight: 76 kg

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 23 volts -Power: 3 kW -Speed: 1705 rpm -Drive motor for: Steinbock forklifts -Dimensions: 375/230/H200 mm -Weight: 25 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from a Still forklift -Drive: 40 V 2.5 kW -Dimensions: 340/225/H300 mm -Weight: 32 kg

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 48 volts -Power: 0.8 kW -Speed: 2755 rpm -with: Cyclo gear type XFMG3

Electric hoist, crane, electric wire rope hoist, cable winch DEMAG type P 10 Fabr. No. 941 477 Year of manufacture 1962 Load capacity 2000 kg with 4 strings Lifting height 5 meters Hoisting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 volts, 50 Hz - Hoist DEMAG, type 19/11 K28P - Electric chassis DEMAG, type 13 / 6 K8 - 1 travel speed approx. 19 m/min - Chassis for double T-beams, beam width 120 to 180 mm - Load hook for 4 load trains - Control bottle for the hoist with approx. 2.5 meters cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg good condition; used

New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives

Starter electric

Chain hoist with motorized chassis for steel beams, load capacity: 1,000 kg, lifting speeds: 5.4 m/min. (fast); 1.4 m/min. (slow), incl. hallway operation, without steel beams. Brakes and drives workshop overhauled / tested.

Electric chain hoist with travel motor for steel beams, hoisting capacity: 1.000 kg, hoisting speeds: 5,4 m/min. (fast); 1,4 m/min. (slow), incl. Pedestrian control, without steel beam. Brake and drives revised / function checked.

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

There are new carriage/forklift tines in good condition for sale! You are not bent! Dimensions: Length: 120 cm, fork height: 41.5 cm = approx. 41.5 cm, distance of the recording, a visit is possible by arrangement only pick up. Private sale

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.