used EHT Bending Presses

Key data: 80 t, 3050 mm

Pressing force 800 kN Bending length 3050 mm Plunger stroke approx. 160 mm Installation height up to 340 mm Dimensions LxWxH: 3750 x 1600 x 2850 mm Weight approx. 7500 kg including tools (see photos)

Key data: 250 t, 6050 mm

Manufacturer: EHT Werkzeugmaschinen GmbH Type: 250 - 60 Year of construction: 1998 Working length: 6050 mm Pressing force: 250 tons Oil quantity: 400 l Nominal current: 52 A Main fuse current rating: 80 A Main motor power: 22 kW Control Type: DNC 74 PSG

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

This EHT VarioPress 225-30 Bending machine was manufactured in the year 1997 in the Netherlands.

This EHT EHPS 25-30 Bending machine was manufactured in the year 1991. The machine has a pressing force of 2500 kN.

Key data: 3550 mm

Ref.-No.00804 Description Hydraulic Press Brake Tools included Manufacturer: EHT Type EHT VarioPress 320 Year of construction 1997 1997 Pressure infinitely adjustable: 3200 kN 320 tons max. working width: 3550 mm 3550mm Working width between uprights: 3050 mm Stand projection: 350 mm Table height: 900 mm Plunger stroke: 270 mm Plunger bevel adjustment: 15 mm With crowning device and quick-clamping device for upper tools Lifting speed: empty 100 mm/s, under load: 10 mm/s, retraction: 100 mm/s Control: DNC 80 PC ( DNC 84 PS= 4 axes

Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm

Force of pressure: 250 t working width: 3550 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: Yes Electr. Supply: 400 V, approx. 26 kW weight: 20 t space: 2100 x 3800 x 3100 mm

Hydraulic press brake make EHT type APN 80Machine -No: 20377, built in 1970Max. Pressing pressure: 80 tTable length: 3550 mmTool length: 3550 mmDistance between the stands: 3050 mmStand projection: 250 mmRam stroke hydraulic: 100 mmPush stroke mechanical: 80 mmDrive power of the high-pressure pump: 11 kWDrive power of the gear motor: 0.75 kWPressure in the retraction system: 120 - 150 atüNitrogen loading in the accumulator: 80 atmContent of accumulator: 10 lContent of the oil tank: 280 lOil quality Hydraulic oil: 3 ° E at 50 ° COperating voltage three-phase: 380 volts, 50 HzControl voltage: 220 voltsDrive power: 12 kWWeight approx: 9550 kgExternal dimensions: 3565 x 1680 x 2700 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer ...

Technical data: -maximum cutting width 3050 mm -maximum cutting capacity at 45 KP / mm² 4 mm -hydr... Cutting angle adjustment - number of holders of 18 PCs -Speed up to 24 / min -front angle stop 1100 mm -3 PCs front support arms 750 mm -mot. Backgauge positioning control 5-1000 mm - sheet reversible - cutting line illumination -E - foot switch -Rear area protection with light barrier -Drive 400 V / 9.5 kW -Space requirement approx. B 3900 x H 1850 X 2100 mm -Weight approx. 5.7 t

pressure: 150 t chamfer lenght: 3550 mm distance between columns: 3050 mm Control: Cybelec DNC 880S stroke: 700 mm throat: 350 mm weight of the machine ca.: ca. 15.000 kg height of the machine: 3.900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working length: 3050mm, pressing force: 2500kN, number of operational hours unknown, including set of tools and documentation, on-site inspection is possible.

Pressing force: 1250kN, bending length: 2550mm, oil volume: 250l, control: DNC 806 PS/K.

sheet width: 5000 mm plate thickness: 6 mm distance between columns: 5030 mm throat: 340 mm weight of the machine ca.: 14 t dimensions of the machine ca.: 5500 x 2250 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 7250 mm distance between columns: 6550 mm Control: throat: 400 mm ram - range of adjustment: 270 mm stroke: 270 mm table surface area: 7250x400 mm dayligth: 560 mm fence: 5-1000 ja /nein total power requirement: kW weight of the machine ca.: 53 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: / mm plate thickness: / mm distance between columns: / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80, ELCO 85 P Lower knife height adjustment The data for this ad was created with ModulMWS - the software soluti ...

pressure: 225 t chamfer lenght: 6050 mm distance between columns: mm Control: CYBELEC DNC 1200 PS total power requirement: 18,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EHT 3100 x 20 mm Cuttinglength: 3100 mm Max sheetthickness st 45: 20 mm Weight: 18.600 kg

sheet width: 6000 mm plate thickness: 6 mm distance between columns: 610 mm Control: Elgo 87 P2 total power requirement: 15 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 6050 mm distance between columns: 5500 mm Control: Cybelec type: ModEva 12 S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC sheet metal shears make EHT type TSS 4-20Fabr. -No: 107785, year of construction 1998Technical specifications:Working length: 2020 mmmax sheet thickness at 450 N / mm 4 mmOil volume: 160 lelectr. Connection: 400 V, 50 HzDrive line: 7.5 kWDimensions approx: 2800 x 2150 x 2150 mm, weight approx: 4.5 tWith- CNC control ELGO P 8721- Hold-up device- Scrap chute- foot switch- automatic cutting angle- automatic cutting gap adjustment- 3 angle stops in front- Cutting line lightingin a little used and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Sheat metal Shear make EHT type EHS 6-50Machine -No: 19782 Year 1983Max. Sheet thickness: 6.0 mmCutting length: 5050 mmKnife length: 5100 mmCutting angle: 1 - 15 °Knife strokes per minute: 18Number of hold-downs: 26Pressure p. Hold down: 60 barOperating pressure: 280 barOil filling: 220 lDrive power: 12 kWWeight approx: 11 tOutside dimensions approx: 5500 x 2900 x 2100 mmWith- mot. back gauge 1500 mm with length indicator- Cutting angle indicator- Cutting angle adjustment- Cutting length limit- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3550 mm Control: CYBELEC ModEva Pac throat: 350 mm distance between table / ram: 430 mm table width: 250 mm stroke: 250 mm total power requirement: 18,5 kW weight of the machine ca.: 16500 kg dimensions of the machine ca.: 4400x2100x3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3050 mm column arm: 350 mm dayligth: 430 mm piston stroke: 220 mm table width: 300 mm oil volume: 390 ltr. pressure: 265 bar total power requirement: 18,5 kW weight of the machine ca.: 13.000 kg range L-W-H: 4900 x 2250 x 3200 mm ** from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.