used EDI Sheet extrusion dies

COEX adapters for wide-slit nozzle up to 5 layers are possible with an appropriate module

EDI Autoflex Extrusion Die width 900 mm.

1100W; Tested working

ULTRAFOCUS DXA is a high-resolution X-ray Dual Photon Absorption (DEXA) imaging and measurement system. The entire system comprises an X-ray unit and a workstation, and can be installed on the laboratory bench or directly in the vivarium to protect the integrity of the colony. With its 10 x 15 cm CMOS detector and energy range from 10 to 100 kV, ULTRAFOCUS DXA is ideal for imaging a wide range of samples and for true DEXA analysis. The microfocus tube and geometric magnification - up to X 6 - provide images with a resolution of 8 μm. In DEXA mode, the system automatically calculates lean and fat mass (BMD - BMC) with percentages. Data for the whole body and the area of interest (ROI) are presented. Used under GMP conditions, it has been out of service since November 2023.

see pdf attached

According to description pdf attached complete line for profiles + WPC profiles

Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change

Haul-off-saw combination, used Manufacturer: BLAKE Type: 302-1100-140 Year of construction: 1993 Haul-off force: approx. 10,000 N Pad width: 120 mm Effective contact length: 1100 mm Haul-off speed: approx. 0.5 – 10.0 m/min. Caterpillar clamping: pneumatic Drive motor haul-off: approx. 3.5 kW Drive motor saw: approx. 1.5 kW Profile cross-section: approx. 140 x 60 mm

see pdf attached

see pdf

see PDF attached

A used extrusion line for the production of rigid PVC profiles, Output approx. 300 - 350 kg/h, consisting of: 1 x twin screw extruder Manufacturer: Battenfeld-Cincinnati Type: ARGOS 93P-28D Year of construction: 2007 Screw diameter: 2 x 93 mm (parallel) Screw length: 28 x D Screw speed: max. 26.0 1/min. Drive power: 50 kW (GS motor) Power: approx. 150 kVA Operation: EXcPRO-XP with 10.4' TFT colour display Accessories: horizontal screw dosing, material hopper Degassing unit with vacuum pump Output: max. 300 - 350 kg/h for rigid PVC, depending on the material and product Note: new gearbox installed in 2014. 1 x Vacuum calibration unit Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Length: 6000 mm Vacuum pumps:3 x BluVac pumps from Speck, Energy-saving vacuum generation through patented speed control Pump power: 3 x 4.3 kW Longitudinal adju ...

Haul-off, used and refurbished Manufacturer: Battenfeld Type: P-250-SX-2000 Year of construction: 1988 Haul-off force: 30,000 N Pad width: 250 mm Effective contact length: 2000 mm Number of rubber pads: 200 pieces Haul-off speed: 0.16 - 4.0 m/min. Drive motor: 4.2 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic Profile cross-section: max. approx. 300 x 100 mm Power: 10 kW Dimensions: 3400 x 1300 x 2300 mm (LxWxH) Weight: approx. 2300 kg Condition: The haul-off has recently been completely overhauled.

Caterpillar haul-off, used Manufacturer: IDE Type: ME-31 Year of construction: 1976 Pad width: 180 mm Effective contact length: 800 mm Pull-off speed: max. approx. 10.0 m/min. Drive motor: approx. 3.0 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: manually by spindle Profile cross-section: max. approx. 300 x 100 mm Note: The haul-off was overhauled in 2015 and a new electrical control cabinet was installed. Condition: The upper gearbox is leaking.

1 x Vacuum calibration unit for profiles Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Total length: 6700 mm Vacuum connections: 4 x 8 pieces Water connections: 26 pieces Vacuum pumps No.1-3: 3 pieces of BluVac pumps from Speck, Energy-saving vacuum generation thanks to patented speed control Pump power: 3 x 4.3 kW Vacuum pump No. 4: Speck (5.5 kW) Longitudinal adjustment: electromotive Connected load: approx. 26 kW Accessories: 1 x water pump (1.5 kW) for the water circuit, 1 x blower (0.95 kW) for drying the profile,

Haul-off and saw combination, consisting of: 1 x Caterpillar haul-off Manufacturer: Battenfeld Type: P250-SX-2400 Year of construction: 1992 Contact length, effective: 2200 mm Pad width: 250 mm Haul-off force, max.: approx. 30,000 N Speed: max. 8.0 m/min. Connected load: approx. 6.0 kW 1 x Saw Manufacturer: Battenfeld Type: SPR-125 Year of construction: 1992 Profile cross-section, max.:230 x 90 mm or 160 x 110 mm Pipe diameter: max. 125 mm Saw blade diameter: 420 mm Travel distance:1000 mm Working speed: max. 20 m/min. Cutting capacity: 15 cuts/min. Saw motor: approx. 1.5 kW

Aluminum tear plate, aluminum checker plate, checker plate, checker plate -Material: aluminum -Dimensions: 1500 x 2160 mm -Sheet thickness: 2.5 mm -Tear thickness: 4.0 mm -Number: 30 pieces of checkered plate available -Price: per piece -Weight: 24 kg/piece

Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling table (belt type ) Strecher force: 200-300 ton Die oven Finsihing table and saw Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER Hot saw Operation desk PLC type (need sone ...

TYPE: DIRECT, BILLET DIA.: 90 MM, LENGTH: 400 MM

Used line for the production of the co-extrusion by PST Forming method. PTI - The twin screw extruder DS 92/28   2x screws with a diameter of 92 mm The length of screws 28 x L / D Snails closed system with internal temperature control, deep nitrided, with degassing on the cylinder, extruder equipped with a vacuum pump with filter, Siemens Servo Motor power: 60 KW Torque: Nm 15700 Screw rotation: 0 - 50 rev. / Min. Zones with ceramic heaters with an intense cooling: 5 x 5 KW Cooling Zones: 4 Performance with hard PVC, depending on the materials and tools: max.600kg / h Length: 4500 mm Width: 1600 mm Height: 2300 mm           Extruder equipped with a microprocessor control SIEMENS type Extrusion Pro Pak visualization 2. Co-Extruder PTI - The twin screw extruder DS 68/28 Snails with a diameter of 2 x 68 mm Length of the screws: 28 x L / D Snails cl ...

Description: Extruder Müller ELK 60-28 Manufacturer: Müller Type: ELK 60-28 Year of construction: 1995 Condition: very good Type of offer: second-hand machine Location: D - North Rhine-Westphalia Technical data: Müller extruder machine 40,000 h Runhour type: ELK 60-28, profile extruder control:-year: 1995 injection unit screw diameter mm: 60 other ELK 60-28 d 57 KW

Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14“ x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rex ...

800 MT extrusion press 1. container size 127mm diam x 560mm lenght 2. capacity: extrusion: 800t/1000t extrusion (low tonnage) at 210kg/cm: 697M Ton Main ram forward at 210 kg/cm: 112 M Ton Main ram return at 210 kg/cm: 63 M Ton Contianer seal at 210 kg/cm: 69 M Ton Contianer open at 210 kg/cm: 94 M Ton Piercing at 210 kg/cm: 102 M Ton Mandrel return at 210 kg/cm: 63 M Ton Die slode at 210 kg/cm: 12 M Ton Stroke Main ram: 1320 mm Container: 250 mm Speed 38.0mm/sec 44.0mm/sec More information on request

Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.

Qty. 1 Second-hand extrusion press Manufacturer: Loewy Type: 4 column floating - mandrel piercing press Aprox year of manufacture: 1939 Container size (dia.): 406 & 508 mm 16" and 20" Container size (length): 1350 mm Billet size (length): 1000 mm Nominal Extrusion Force: 5000 MT Nominal Piercing Force (Max): 740 MT Mandrel arresting Force floating mandrel Stroke Main ram: 2750 mm Piercer : 1200 mm