We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
x-travel: 2000 mm y-travel: 1000 mm z-travel: 800 mm spindle turning speed range: 4 Stufen von spindle turning speed range: 20 - 3150 U/min spindle taper: SK 60 + SK 50 milling head -swivable +/-: 45 ° copying travel - horizontal/cross: 300 mm copying travel face: 200 mm distance spindle /table: 200 bis 1000 mm distance spindle center to column: 1120 mm table surface area: 4400 x 1000 mm table load capacity: 8000 kp total power requirement: 30 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 7,5 x 5,0 x 4,4 m Machine is in an excellent condition, continuously maintained by the manufacturer • Control D + R, extended with HSM • DROOP & REIN - copy control type kc • HF spindle TDM HK 12-02, 15000 rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
X/Y/Z: 3000 mm x 2000 mm x 1200 mm. Control unit : Siemens 840D 3 axis linear slide Machine can be seen in working condition
used
Vertical milling machine / metal milling machine; - travels x, y, z 1900x1020x1020 mm; - Table surface 2400 x 1000 mm; - Tool holder SK 50; - Spindle speeds 20-1000 rpm; - Spindle motor 26 kW; - Spindle diameter 130 mm; - with clamping table; -Abm. 1000x650 mm and tools; -Space requirement approx. 4.8 x 5.3 x 4 m.
used
X-travel: 1700mm, y-travel: 800mm, z-travel: 800mm, max. load: 6t, clamping surface: 220x800mm, controls: HEIDENHAIN Positip 850.
used
x-travel:2300 mm y-travel:1200 mm z-travel:950 mm feed::max. 4000 mm/min spindle turning speed range:31,5 - 1.600 1/min spindle taper:SK 50 spindle drive:30 kW milling head -swivable +/-:45 ° distance spindle /table:max. 1200 mm table surface area:3000 (4200) x 1200 mm table load capacity:10000 kg Control:TNC 426 HEIDENHAIN weight of the machine ca.:38 t CNC milling machine, from 2008 with HEIDENHAIN TNC 426 control, in 2022 overhauled, 2 pcs. workbenches 2 pcs. tool cabinet lot of tools (around 140 pcs.), el. handwheel approx. 69.000h "machine on, 18.500h "spindle on" very good condition, under power in factory
used
table diameter:1400 mm x-travel:2200 mm y-travel:1200 mm z-travel:1100 mm c-axis:360.000 x 0,001 b-axis:+/- 60 ° w-axis:350 mm distance spindle center to column::1100 mm table load:6 t spindle drive:15 kW Torque:4600 nM spindle turning speed range:10 - 1600 U/min spindle taper ISO:50 no. of tools in the magazine:20 Stück total power requirement:45 kW weight of the machine ca.:30 t dimensions of the machine ca.:5,8 x 5,8 x 4,9 m Machine complete overhould and retrofit in 2001 with SIEMENS 840 D control for 6 axis - tool changer for 20 tools - spindle quill 350 mm as W-axis - rotary table as C-axis - angualar milling head indexable - oil cooler, chip conveyor, hand operating panel.
used
-Year of construction: 1965 ( Complete overhaul and conversion to CNC 2003 by Rottler for 750,000.00 Euro ); -Heidenhain LB 382 C length measuring system; -Accuracy = +/- 0.005 mm; -Portal passage approx. 2300 mm W x approx. 1300 mm H; -Dimensions of required floor space: -Height approx. 4,250 mm, width approx. 3,900 mm, length approx. 20,000 mm; -Specifications: -X-axis (movement: table to move horizontally); -Table - feed speed 0-5900 mm/min (1350 r/min); -Table - rapid traverse speed 0-5900 mm/min (1350 r/min); -Table - travel 8500 mm; -Table - feed force 161729 N (125 Nm); -Y1 / Y2 axis (headstock moving horizontally); -Headstock - feed speed 0-1515 mm/min; -Headstock - rapid traverse speed 5900 mm/min; -Headstock - travel 2100 mm; -Feed force 30000 N; -Z1 / Z2 axis (quill moving vertically); -quills - rapid traverse speed 420 mm/min; -quills - travel 400 mm; ...
used
Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T
used
floor-plate length: 4000 mm floor-plate width: 1600 mm floor-plate height: 300 mm T-slot - distance: 175 mm T-slot - width: 28/48 mm number of T-slots: 9 total power requirement: kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4000x1600x250 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 5300 mm y-travel: 2500 mm z-travel: 1200 mm angular milling head: Table load: 60000 kg column daylight: 2700 mm workpiece height max.: 1700 mm Table dimensions: 5000x2250 mm control: Heidenhain type: 430 : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 160 mm x-travel: 4000 mm y-travel: 2200 mm z-travel: 1500 mm : 270 mm spindle turning speed range: 20-2000 U/min Control: Heidenhain type: TNC530i table surface area: 3000x1600 mm table load: 40 t spindle taper ISO: 50 spindle motor: 50 kW T-slot - width: 28 mm number of T-slots: 9 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
floor-plate length: 3500 mm floor-plate width: 1600 mm floor-plate height: 180 mm T-slot - distance: 175 mm T-slot - width: 30/50 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4000x1600x250 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 3300 mm y-travel: 2200 mm z-travel: 1300 mm w-axis: 350 mm workpiece height: 1700 mm milling spindle diameter: 140 mm diameter of quill: 230 mm milling head speed: 40-2000 U/min transmission ratio: 4 table surface area: 4260x2000 mm T-slot - distance: 175 mm T-slot - width: 28 mm number of T-slots: 11 workpiece weight: 300000 kg milling spindle motor: 30 kW Feed: 5-3000 mm/min control: Fidia total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 2000 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/min Table area: 2300x1200 mm Spindle: 200 mm spindle stroke: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Nr 3762 Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 4000 mm y-travel: 2000 mm z-travel: 1300 mm Control: Heindenhain type: TNC530i : table surface area: 5200x2000 mm Table load: 30000 kg pinole diameter: 230 mm number of T-slots: 11 T-slot - width: 28 mm T-slot - distance: 175 mm spindle taper ISO: 50 turning speeds: 40-2000 U/min spindle motor: 30 kW transmission ratio: 4 total power requirement: kW weight of the machine ca.: 70 t dimensions of the machine ca.: 10x5,5x5,8 m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 5300 mm y-travel: 3300 mm z-travel: 1300 mm Table load: 50000 kg column daylight: 2600 mm workpiece height max.: 1700 mm Table dimensions: 5000x2000 mm control: Heidenhain type: ITNC530 : angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table length: 3000 mm Table width: 1250 mm Longitudinal X: 2400 mm Cross Y: 1250 mm Vertical Z: 1000 mm Positions ATC: 0 CNC Brand: Heidenhain CNC Model: TNC 415 Make Droop Rein FSM Type FSM 1255 DA 30 kc N Year 1991 HeidenHain TNC 415 Table length (mm)L = 3.000 Table width (mm)W = 1.250 Longitudinal X (mm)X = 2.400 Cross Y (mm)Y = 1.250 Vertical Z (mm)Z = 1.000 130 / Bt50 / 3150 Rpm Copy attachmentAngle + / - 45 Gr Weight 47.500 Kg Power 30 kW
used
FIXED BENCH MILLING MACHINE with SWIVEL VERTICAL HEAD and PRISMATIC GUIDES. Brand : DROOP & REIN. Model: FS130gku. Table: 2200 x 800 mm. Long crossbar : 1700 mm. Transverse crossbar : 870 mm. Vertical crossbar : 800 mm. Spindle taper : ISO 50. THE MACHINE IS EQUIPPED WITH A VIEWER.
used
x-travel: 1900 mm y-travel: 1020 mm z-travel: 1020 mm table surface area: 2400 x 1000 mm spindle taper: SK 50 spindle turning speed range: 20-1000 U/min spindle drive: 26 kW spindle diameter: 130 mm width of T-slots: 22/42 mm flute distance: 168 mm number of T-slots: 6 angular milling head: digital readout: Heidenhain total power requirement: 25 kW weight of the machine ca.: 23,5 t with digital readout ball screw extensive toolings and accessories! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Universal milling machine Ecomil 100 Heidenhain Control TNC 124 SK 50 56 shots with tools Spindle head swivel Quill extendable 700 x 2000 clamping area Control retrofitted. Feed continuously variable all axes Rapid traverses Length 3.20 m Width 2 m Height 3.50 m Weight 14 tons Spindle 20 - 1000 rpm T slots 22/42 min distance 140 mm
used
x-travel: 8000 mm y-travel: 920 mm z-travel: 1000 mm Control: total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m Year of construction approx. 1970 X 8000mm Y 920mm Z 1000 mm Head rotates 180° Table Length 3600mm Width 920mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 2400 mm y-travel: 2000 mm z-travel: 1450 mm table surface area: 5000 x 1400 mm spindle taper: SK 50 Control: Fidia C1 throat: 1500 mm with digital readout ball screw extensive toolings and accessories! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Lathe broaching machine -slotting machine , keyseating machine, slot broaching machine Rotary table, rotary indexing table, dividing head, dividing head Grooves: straight, ring, oval, spiral video available - Chuck diameter: O315 mm - Inner bore: O 98 mm - max. stroke: 250 mm - Rotating three-jaw chuck: grooving in bores (bushes) - standing three-jaw chuck: for grooves in bores (without freewheel) - slot broaching tool, - Dimensions: 1820/830 / H1310 mm - Weight: 1330 kg
used
Vertical copying and milling machine Make: Droop & Rein Type: FSM 1255 DA 30 kf Year of construction: 1990 Commissioned: 1992 Control: Fidia CNC 11 Spindle Ø: 130 mm Spindle speeds: 80 – 3150 rpm Max. milling power: 30 kW Spindle bore: SK 50 Quill stroke: 200 mm Swivel: + / - 45° Travel: X-2400 mm Y: 1250 mm Z-1000 mm Feed range: 5 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface: 3000 x 1250 mm Max. table load: 10 to Total power requirement:55 kW Space requirements: approx. 8500 x 5500 x 4500 mm Weight: approx. 47 tons
used
This Droop & Rein FS 130 SKE Vertical Machining center was manufactured in the year 1978. It is equipped with a HEIDENHAIN iTNC 426 control unit and has 3 axis. The machine has a spindle speed of 31.5 â 1600 rpm. The machine was completely overhauled in 2022. See information about overhauling details in PDF (DE) attached. Contact us at any time for further questions.