british flag
Resale Logo

Drilling used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information service for engines 100-7000 KW all types  August Storm GmbH & Co. KG  http://www.a-storm.de 
banner logo
start page > keywords Drilling > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
126374257 101

KOLB NKR 50/2500 for sale
Column Radial Drilling Machine


Drilling capacity steel/ cast iron: 55/ 70mm, max. jib length: 2500mm, rotational speed: 34-1500/min, feed rate: 0.07-3mm/U, weight: 8t.
used machine
 
Drilling capacity steel/ cast iron: 55/ 70mm, max. jib length: 2500mm, rotational speed: 34-1500/min, feed rate: 0.07-3mm/U, weight: 8t.
1970
Price  
  DE   request
126406147 203

FAMAD PACZK SGML II DUO for sale
Drilling- milling production line for door locks a


2010
57,500 EU?  
  PL   request
126374238 103

DECKEL FP 50 CC/T for sale
Universal Milling and Drilling Machine


X-travel: 1200mm, y-travel: 600mm, z-travel: 500mm, working/ NC-rotary table dimensions: 1600x675/ 800mm, max. working/ NC-rotary table load: 2000/ 1000kg, number/ width/ distance of T-grooves: 10-11/ 14 H7/ 63mm, number ...
used machine
 
X-travel: 1200mm, y-travel: 600mm, z-travel: 500mm, working/ NC-rotary table dimensions: 1600x675/ 800mm, max. working/ NC-rotary table load: 2000/ 1000kg, number/ width/ distance of T-grooves: 10-11/ 14 H7/ 63mm, number of tool slots: 40, control: DECKEL DIALOG 11, including chip conveyor, tool changer and switch to horizontal and vertical machining defective, machine is currently not operational.
1991
Price  
  DE   request
126406149 103

KITAMURA Mycenter 5 for sale
Numerical milling Kitamura 1989


Machine for machining by milling and drilling. Lack of documentation.
used machine
 
Machine for machining by milling and drilling. Lack of documentation.
1989
10,150 EU?  
  PL   request
126374071 112  

HECKERT ZFWVG 250 / 4F x 2000 for sale
Gear Milling Machines


HECKERT ZFWVG 250 / 4F x 2000 Thread milling- and hobbing machine Year of construction: 1990 Machine number: 262334/24 Milling lenght: 2.000 mm Swing over bed: 260 mm Max. workpiece Ø over bed: 500 mm Max. work ...
used machine
 
HECKERT ZFWVG 250 / 4F x 2000
Thread milling- and hobbing machine

Year of construction: 1990
Machine number: 262334/24
Milling lenght: 2.000 mm
Swing over bed: 260 mm
Max. workpiece Ø over bed: 500 mm
Max. workpiece Ø over slides: 250 mm
Drilling of the workpiece spindle: 102 mm
Drilling of the chuck (max.): 100 mm
Adjustment of the tailstock quill: 100 mm

Equipment:
4 module cutter
1 set of change gears
3-jaw chuck Ø 250 mm
Bezel
Tailstock
Central lubrication system
Machine actuators
Manual / documentation

Complete specifications on request

The machine can be visited by appointment

Delivery ex location D-95349 Thurnau / free DISMANTLED and loaded on truck
Delivery immediate / intermediate sales reserved
1990
Price  
    request
126401716 205

BIESSE SKIPPER 100 for sale
CNC Machining Centre


Weight approx.: 2700 kgDimensions (l x w x h) approx.: 7300 x 5000 x 2400 mmDescription: Serial number 14223, The panels are moved on an air floatation table respect to the tools which are fixed, No waste of preparation  ...
used machine
 
Weight approx.: 2700 kg
Dimensions (l x w x h) approx.: 7300 x 5000 x 2400 mm
Description: Serial number 14223, The panels are moved on an air floatation table respect to the tools which are fixed, No waste of preparation time even manufacturing 1-piece batches, The machine can work the panel simultaneously from above or bellow and can produce 2 identical or mirrored panels per cycle, Total installed power approx. 20 kw, Maximum panel dimensions 3000 x 1000 x 60 mm, Minimum panel dimensions 90 x 70 x 8 mm, Same equipment from above and bellow: 1 + 1 vertical milling unit with 3.50 kw working from 7000 rpm up to 18000 rpm, 1 + 1 Saw unit working to 4500 rpm,Vertical drilling spindles: 29 + 29, Horizontal drilling spindles X-axis: 4 + 4, Horizontal drilling spindles Y-axis: 4 + 4, Software Windows/BiesseWorks, The tools that appears in the photos are included
2007
used machinery auction RESALE 26,000 €  
  ES   request
126374063 112

CASTEK HUBER MD 20 for sale
Gear Milling Machines


CASTEK HUBER | MD 20 Start hole drilling machine Year of construction: 1998 Machine number: 8720018 Table size: 220 x 220 mm Workpiece weight, Max: 100 kg Spindle speed: 200 rpm Other specifications on request ...
used machine
 
CASTEK HUBER | MD 20
Start hole drilling machine

Year of construction: 1998
Machine number: 8720018
Table size: 220 x 220 mm
Workpiece weight, Max: 100 kg
Spindle speed: 200 rpm

Other specifications on request

The machine can be visited by appointment

Delivery ex location D-92348 Berg / free loading truck
Delivery November 2018 / intermediate sales reserved
1998
4,900 €  
    request
126401721 205

MORBIDELLI UNIVERSAL X5 HDL45 for sale
5-Axis CNC Machining Centre


Weight approx.: 4500 kgDimensions (l x w x h) approx.: 8550 x 2410 x 2800 mmsetting measure approx (l x w x h): 6300 x 3200 x 2900 mmsoftware: XILOG Plus (DXF-Import) working length x-axis: 3650 mmworking width y-axis: 1 ...
used machine
 
Weight approx.: 4500 kg
Dimensions (l x w x h) approx.: 8550 x 2410 x 2800 mm
setting measure approx (l x w x h): 6300 x 3200 x 2900 mm
software: XILOG Plus (DXF-Import)
working length x-axis: 3650 mm
working width y-axis: 1613 mm
working height y-axis: 280 mm
main spindle: 11 kW
tool changer: 12 + 10
vacuum pump: 100 cbm/h
drilling head vertical x-axis: 10 piece
drilling head vertical y-axis: 8 piece
drilling head horizontal x-axis: 4 piece
drilling head horizontal y-axis: 2 piece
saw unit: ja / yes in X
travelling way X-axis: 5155 mm
travelling way Y-axis: 1914 mm
travelling way Z-axis: 400 mm
path-feed rate max. X-axis: 45 m/min
path-feed rate max. Y-axis: 60 m/min
path-feed rate max. Z-axis: 15 m/min
Description: CNC machining center with a construction of one Mobile portal and a fixed console work table
Milling unit 5 axles HSK-63 PRISMA with 11 kW
12-speed front travel tool changer
Right side tool magazine with 10 seats
Drilling unit 18 vert. Spindles + 6 hor. Spindles
Nutsaw in X-direction
TV table with 8 supports L = 1560
Safety device with bumper
Chip conveyor
Controlled central exhaust connection
Sliding door access from the right
2010
used machinery auction RESALE 23,000 €  
  DE   request
126373754 104

ABA FFU 1000/50 for sale
Flat Grinding Machines


Grinding length: 1000 mm Grinding width: 500 mm Table size: 1000 x 500 mm Cross movement: 450 mm / min Magnetic table: 1000 x 400 mm Grinding wheel dimensions: 400 x 50 x 127 mm Workpiece weight: 600 kg Table load ...
used machine
 
Grinding length: 1000 mm
Grinding width: 500 mm
Table size: 1000 x 500 mm
Cross movement: 450 mm / min
Magnetic table: 1000 x 400 mm
Grinding wheel dimensions: 400 x 50 x 127 mm
Workpiece weight: 600 kg
Table load: 850 kg
Control: ABAMATIC 3
Central lubrication system
Documentation
Grinding spindle speed: 2500 RPM
Total power: 15 kW
Condition: good
Machine weight: 5000 kg
Dimensions (W x D x H): 4.7 x 4.0 x 2.14 m
hydraulic longitudinal movement: 3-30 m / min.
Spindle motor 11 kW
Band filter system with 500 l tank
Automatic straight drilling unit
spindle stock installed
partially overhauled: Y drive
Height adjustment spindle overhauled
Sealed hydraulic cylinders of the x axis
guideway of the X - and Z-axes cleaned and scraped new
1998
Price  
    request
126401747 101

TOS VS 32 for sale
Drilling Machine


Weight approx.: 400 kgDimensions (l x w x h) approx.: 600x1200x2000 mmDescription: Incl. vice, for further details see photos
used machine
 
Weight approx.: 400 kg
Dimensions (l x w x h) approx.: 600x1200x2000 mm
Description: Incl. vice, for further details see photos
1969
used machinery auction RESALE 750 €  
  CZ   request
126360056 101

SCHUECO MFM - AF 200 for sale
Battery powered drilling machines


Technical data: -for milling + drilling by ALU - profiles + steel - profiles Steel profiles up to 3 mm wall thickness -X + Y axis NC control SCHÃ?CO EC 609 controlled, -Working range of approx. - X (longitu ...
used machine
 
Technical data:
-for milling + drilling by ALU - profiles + steel - profiles
Steel profiles up to 3 mm wall thickness
-X + Y axis NC control SCHÃ?CO EC 609 controlled,
-Working range of approx. - X (longitudinal) 2660 mm - axis Y (transverse) 370 mm
-Z (vertical) 350 mm
-maximum turning angle approx. -A - axis - 90 / + 90 °
-Machining cross-section max width / height approx. 200 / 200 mm
-Machining cross-section with A pivoted axis about 170 / 110 mm
-Tool mounting SK 30 - work spindle speeds up to 1000 to 20000 RPM
-Work speed Y + axis V.max. 30 m / min
-Work speed X - axis V.max. 35 m / min - working speed Z - axis V.max. 5 1/min
-Drive 400 V / 3,8 kW
-Air consumption per cycle 20 l / min
-Space requirement approx. B 3100 x H T 1890 x 1650 mm
-Weight approx. 1250 kg
-with: - Mount for 5 tool holder - 4 St. separately driven positioning clamping bucks
-Mikrosprüh coolant device
2007
Price  
    request
126388258 205

IBARMIA AZ 32 V for sale
Drilling machine


Boring power: 32,0 mm Stahlbore capacity in cast iron: 35,0 mmCenter of spindle to wall or column: 300 mmColumn diameter: 125 mmSize of table plate: 480 x 480 mmBoring depth max.: 150 mmMotor output: 1,45 kWSpeed: 80 - 1 ...

 
Boring power: 32,0 mm Stahl
bore capacity in cast iron: 35,0 mm
Center of spindle to wall or column: 300 mm
Column diameter: 125 mm
Size of table plate: 480 x 480 mm
Boring depth max.: 150 mm
Motor output: 1,45 kW
Speed: 80 - 1.700 U/min.
spindle taper MT: 480 x 480 MK
weight of the machine ca.: 340 kg
Dimensions (L/W/H): 0,8 x 1,0 x 2,0 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
126360023 101

KOLB KR 55 for sale


Technical data: -Drilling capacity 60 mm -Throat depth 1600 mm -Spindle mount Mt 5 -Spindle hub 390 mm -Spindle speeds, 20 levels 20-2000 RPM -Right rotation -Feed, 12 steps 0.056 2.5 mm/U - drive 400 V /  ...
used machine
 
Technical data:

-Drilling capacity 60 mm
-Throat depth 1600 mm
-Spindle mount Mt 5
-Spindle hub 390 mm
-Spindle speeds, 20 levels 20-2000 RPM
-Right rotation
-Feed, 12 steps 0.056 2.5 mm/U - drive 400 V / 12.8 kW
-Clamp the boom and electromechanical drill unit
-Distance from wrought bed - boring Quill - min approx. 900 mm
-max approx. 1600 mm
-usable machine bed with 4 T-slots 950 x 1700 mm
-Coolant system
-Cube table - space requirement approx. B 2600 x H 3000 x T 1000 mm - weight approx. 4500 kg
1991
Price  
    request
126388253 205

SCHEER DB3 for sale
Dowel Drilling Machine


Weight approx.: 1100 kgDimensions (l x w x h) approx.: 1400 x 1300 x 1800 mmDescription: SCHEER DB3 Dowel Drilling Machine - 2 drilling units type BM 610 | 220/380V | 2,5PS/1,8kW - 2 multispindle header transmission - s ...

 
Weight approx.: 1100 kg
Dimensions (l x w x h) approx.: 1400 x 1300 x 1800 mm
Description: SCHEER DB3 Dowel Drilling Machine

- 2 drilling units type BM 610 | 220/380V | 2,5PS/1,8kW
- 2 multispindle header transmission
- spindle division: 32mm
- tool holder: M10
- spindle distance: min. 32mm / max. 768mm
- Portal passage: 950mm
- lift height: 0-100mm
- height adjustable drilling unit: 0-50mm
- pneumatic spanner: 2pcs. / pistondiam.: 80mm
- lot of new equipment
- very good condition

to drill corner connector, construction drilling, row drilling in 32mm grid, frame dowel holes and cabinet systems
 
used machinery auction RESALE 800 €  
  DE   request
126360018 101

GILLARDON GB 25 for sale
Pillar-Type Drilling Machines


Technical data: Brand: Gillardon Type: GB 25 Technical info: Working table 510x420mm Distance column, spindle Centre 300 m 150-3000 V / min speed Lt motor 400 V, 50 Hz, 3-phase, 0.7, 1.3 kw
used machine
 
Technical data:

Brand: Gillardon

Type: GB 25

Technical info:
Working table 510x420mm
Distance column, spindle Centre 300 m
150-3000 V / min speed
Lt motor 400 V, 50 Hz, 3-phase, 0.7, 1.3 kw
 
2,436 €  
    request
126386305 104

CAWI - SPIRAL Universal-D for sale
Drill Grinding Machine


drill diameter:2-50 mmdrilling length:330 mmlip angle:0-190 °Abrasive area for countersinking up :80 mmclearance angel normal:7-12 °length with MK IV:400 mmLargest drill length at the intermediate chuck:240 mmLargest d ...

 
drill diameter:2-50 mm
drilling length:330 mm
lip angle:0-190 °
Abrasive area for countersinking up :80 mm
clearance angel normal:7-12 °
length with MK IV:400 mm
Largest drill length at the intermediate chuck:240 mm
Largest drill length for the small chuck:210 mm
grinding wheels:250 x 40 x 127 mm
Grinding wheels especially fine-grained for drills up to 6 mm:250 x 25 x 127 mm
coolant pump:0,15 kW
total power requirement:1,1 kW
dimensions of the machine ca.:1250 x 1050 x 1400 mm
weight of the machine ca.:650 kg

 
Price  
    request
126359995 101

FLOTT TB E 1 - R 2 for sale
Bench Type Drilling Machines


Technical data: -Drilling capacity - steel 15 mm -in aluminium 18 mm - spindle mount MT 2 -Drilling depth 95 mm -Unloading spindle / pillar 200 mm -6 spindle speed 400-3600 R/min -Drive 0,45 / 0,75 kW - ...
used machine
 
Technical data:

-Drilling capacity - steel 15 mm
-in aluminium 18 mm - spindle mount MT 2
-Drilling depth 95 mm
-Unloading spindle / pillar 200 mm
-6 spindle speed 400-3600 R/min
-Drive 0,45 / 0,75 kW
-Höhenverst table. on rack 300 x 250 mm
-maximum distance spindle / table up to approx. 330 mm
-Distance from spindle / base plate approx. 510 mm
-Space requirement approx. B 280 x H 850 X 650 mm
-Weight approx. 80 kg
-with quick clamping drill Chuck 1-13 mm
2003
Price  
    request
126384200 205

KOCH for sale
CNC-drilling machines


 
Price  
    request
126359981 101

FLOTT TB 16 L for sale
Bench Type Drilling Machines


Technical data: -Drilling - in steel 18 mm -in aluminium 23 mm -Spindle mount MT 2 - drilling depth 100 mm -Unloading spindle / column 250 mm -5 drill spindle speed 340-2400 R/min -Drive 400V / 0.75 kW  ...
used machine
 
Technical data:

-Drilling - in steel 18 mm
-in aluminium 23 mm
-Spindle mount MT 2 - drilling depth 100 mm
-Unloading spindle / column 250 mm
-5 drill spindle speed 340-2400 R/min
-Drive 400V / 0.75 kW
-height-adjustable table 330 x 280 mm
-Distance from spindle / table approx. 330 mm
-Distance from spindle / base plate approx. 510 mm
-Space requirement approx. B 350 x H 990 x H 600 mm
-Weight approx. 150 kg
-Keyless drill Chuck 1-13 mm
-Machine frame B H 700 x 880 x H 900 mm

1984
Price  
    request
126370846 1900

FELISATTI SDF 10 / 260 E2 for sale
4 pcs Drillingmashine


Weight approx.: 8 kgDimensions (l x w x h) approx.: 400x400x400 mmDescription: 4 pieces, details see pictures
used machine
 
Weight approx.: 8 kg
Dimensions (l x w x h) approx.: 400x400x400 mm
Description: 4 pieces, details see pictures
2016
used machinery auction RESALE 40 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More DRILLING models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Universal Milling and Drilling Machine DECKELFP 50 CC/T

X-travel: 1200mm, y-travel: 600mm, z-travel: 500mm, working/ NC-rotary table dimensions: 1600x675/ 800mm, max. working/ NC-rotary table load: 2000/ 1000kg, number/ width/ distance of T-grooves: 10-11/ 14 H7/ 63mm, number of tool slots: 40, control: DECKEL DIALOG 11, including chip conveyor, tool changer and switch to horizontal and vertical machining defective, machine is currently not operational.

CNC Working center BIESSEROVER 30 S2

Code: 0408 Brand: BIESSE Model: ROVER 30 S2 - CE Standard CNC Working center - CE standard Working area X-axis mm 3432 - Y-axis mm 1641 Max panel thickness 200 mm Drilling data: spindles for vertical drilling: n ° 10 (X) + 10 (Y) - spindles for horizontal drilling on 4 sides of panel n ° 6 (X) + N ° 2 (Y) - Motor power Hp 2,3 Milling data: electrospindle 10Kw (13.6 Hp) - HSK F63 Horizontal milling unit with vertical motor Y direction - HSK F63 connection HSK F63 aggregate with blade diameter 250 mm HSK F63 aggregate with two horizontal outputs HSK F63 aggregate with one output manually rotatable 360 ??° and manually tilting from -5 ° to + 90 ° Tool rack 3 + 5 places Kit for the processing of arched frames "Arcad" software module basic package - The software allows to produce standard and special frames DXFCID-3 interface module Chip conveyor belt N ° 8 worktables Vacuum pump mt3 /h 100 Max electrical power consumption Kw 22 Air operating pressure 6 bar Overall dimensions: mm 6960 x 4560 x 2000 h Dimensions: for transport : mm 5400 x 2300 x 2300 h Weight kg 5700

Horizontal Machining Center STARRAG HECKERTClassic CWK 500 CNC

Number of available machining centers: 2, x-travel: 800mm, y-travel: 600mm, z-travel: 805mm, clamping surface: 500x500mm, table load: 800kg, directional drilling diameter: 20 H6, centering bore diameter: 50 H5, feed rate/ rapid traverse: 1-32m/min, acceleration: 3.5m/s², working spindle diameter: 100mm, rotational speed: 20-6000/min, number of tool slots: 180, tool mount: HSK-A-100, control: SIEMENS SINUMERIK 840 D, length: 5640mm, width: 4580mm, height: 2950mm, weight: 14.3t, including chip conveyor.

Universal Drilling and Milling Machine UNISIGNUniport 6

X-travel: 6000mm, y-travel: 3000mm, z-travel: 800mm, length: 11325mm, width: 6285mm, height: 3800mm, weight: 55t, available after December 2018.

Universal Drilling and Milling Machine UNISIGNUniport 5

X-travel: 6000mm, y-travel: 3000mm, z-travel: 600mm, spindle table distance: 200-800mm, frame opening: 3600mm, feed rate: 5-10.000/min, rotational speed: 10-3000mm, number of tool slots: 26, tool mount: SK 50, control: SIEMENS SINUMERIK, available after December 2018.

Universal Milling and Drilling Machine DECKELFP2A

X-travel: 300mm, y-travel: 300mm, z-travel: 400mm, rotational speed: 31-3150/min, max. feed rate: 2000mm/min, max. rapid traverse: 4000mm/min, number of T-grooves: 6, control: DECKEL DIALOG 11, weight: 1.6t.

Paper drilling machines Nagel Hang Iram1, 2, 4 Spindel

Verschiedene Modelle und Groesse: 1,2 und 4 Spindel . Bei Interesse senden wir Ihnen eine Liste unserer Papierbohrmaschine. Bitte schreiben Sie uns.

Radial Drilling Machines MasVR5A

Radial engine, BUT bus VR5A Brand: But Spindel capacity: 70 mm Arm: 1550mm Tree Cone: MK 50 Speed: 28-2,500 RPM

Radial Drilling Machines MasVO63

Arm: 2000 mm, Speed: 11.2-2000 rpm Radial drilling machine of high precision of buses Czech Republic Manufacture

Radial Drilling Machines MeuserM40R

Radial drilling machine-am because Minewill be Brand: German Am Because Minewill Be Model: M40R Arm: 1250 mm With the table.

Radial Drilling Machines MasVO32

Radial Engine BUT VO32 Arm course: 750 mm Rotations of 90 rpmin the 4500rpmin Minimum advance: 0.03 Maximum advance: 0.31 Fully restored machine With Table Tank and motor.

Radial Drilling Machines ForadiaGR50-1200

Foradia Radial engine GR50-1200 Spain Manufacturing Arm course: 900 mm Vertical travel: 800 mm 6 RPM low speed ranges from 35rpmin to 570rpmin 6 RPM high rpm ranges from 570rpmin to 1460rpmin With trunnion

Drilling Centres IBARMIAB-50

OVERVIEW: Brand: IBARMIA Model: B-50 Application type: Drilling Machine type: Drilling Machine Construction year: 1990 Production hours: 1000 Location: Spain Origin country: Spain GENERAL DATA: Measurements width: 600 mm Measurements depth: 1000 mm Measurements height: 2400 mm Machine weight: 720 kg MAIN DRIVE: Spindle speed range: 1239 1/min TABLE: Outer length: 560 mm Outer width: 560 mm

Column-type drilling machines WeboMC5

Auction name: Machine trade, tools and parts in Eibergen Online auction Start of auction: 10 July 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 17 July 2018 15:50 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Milling / drilling machines TechnoplusTP1045

Auction name: Machine trade, tools and parts in Eibergen Online auction Start of auction: 10 July 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 17 July 2018 15:50 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

LINE FOR CUTTING AND DRILLING/NOTCHING IRON1000x2,5 mm.

LINE FOR CUTTING AND DRILLING/NOTCHING MAKE IRON 1000 x 2.5 mm. Year 1996 Composed by: UNCOILER/ COILER self-controlled Flow rate mg. kg. 6000 tape width mm.1000 BIGHT PHOTOCELL CONTROL TAPE STRAIGHTENER with 4+ 11 rolls Max 1000 tape, 3 mm thickness. GROUP INTRODUCTION OF TAPE FOLLOW ROLLERS ROLLER TWO ROLLER EQUIPMENT COVERED IN POLYURETHANE AND MOTORIZED ROLLERS FLAT INTRODUCTION OF THE TAPE at the exit of the straightener BIGHT PHOTOCELL CONTROL MECHANICAL SHEAR Max. of the tape 1550, thickness Max 2.5 mm. SHEET STACKER FOR SHEARS LOADING PLAN FOR SHEET METAL SQUARES BORING / NOTCHING BENCH SWAN NECK UNITS 90 DEGREE NOTCHING MOULDS CNC ELECTRONIC ROLLER FEEDER MACHINE CNC MP 16.2 LIFTING AND TRANSLATION CRADLE SELF-CONTROLLED UNCOILER/ COILER HYDRAULIC CONTROL UNIT ELECTRICAL CABINET UNLOADING WAY OF THE LINE FROM LEFT TO RIGHT

Find used machinery dealers in your country