1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 101
item-No.: 126926758
Maximum drilling diameter, mm 50 Departure of the spindle from the column, mm - maximum 1600 - least 375 Distance from spindle nose to plate,mm - the largest 1600 - least 450 Number of spindle speeds 21 Spindle speed limits, mm / Rev 20...Two thousand Number of spindle feeds 12 Limits of spindle feed, mm / about 0.056...2,5 Colons - Diameter, mm 31,5 Hydraulic clamp Sleeve The greatest course of a sleeve on a column, mm 750 Speed of vertical movement, m / min 1.4 Spindle Spindle stroke,mm  ...
Category: 102
item-No.: 126929178
turning diameter:520 mm turning length:500 mm control:Fanuc 0i-TF turning diameter over bed slide:320 mm max. swing diameter:520 mm spindle speeds:4500 1/min. spindle passage:51 mm spindle drive:15/11 kW C-axis:0,001 ° tool turret:12-fach mit BMT-65 RADIAL, VDI40 _ feed stepless:0,001-5000 mm/U travel -x axis:200 mm travel - z:600 mm rapid power traverse in X-and Z direction:30 m/min taper in tailstock:4 MK tailstock quill stroke:100 mm tailstock adjustment:500 mm weight of the machine ca.:4000 kg Overall size:3,6 ...
Category: 101
item-No.: 126917152
Category: 101
item-No.: 126901782
Technical data: -Drilling capacity in steel ST 60 28 mm -Drilling capacity in steel ST 60 32 mm -MK 3 long spindle spindle recording -Spindle hub 180 mm -Infinitely variable spindle speeds -adjustable - 1 level 65-240 U/min -Level 2 130-480 RPM -Level 3 240 875 RPM -Level 4-480-1750 RPM -3 E. feed 0.1; 0.2; 0.3 mm / Rev -Throat depth 290 mm -max distance table - spindle 620 mm -Table with 2 T-slots 520 x 400 mm -Height-adjustable via rack and pinion with hand crank -D ...
Category: 101
item-No.: 126885079
Category: 1007
item-No.: 126916952
1996
112.500 EU?
Land-pl PL
Machine designed for vertical wells. It is used in construction works. During the inspection no malfunctions or shortages were found in the equipment or equipment (except batteries).
Category: 101
item-No.: 126885077
There are three machines available, rotational speed: 56-1250/min, drilling capacity steel St. 60/ cast iron GG 20: 35/ 45mm, feed rate: 0.04-0.4mm/U, length: 1500mm, width: 1100mm, height: 2520mm, weight: 940kg, including rotary indexing table and 4-jaw chuck.
Category: 205
item-No.: 126911963
bore capacity in steel (diameter): 35,0 mm throat: 295 mm bore stroke: 160 mm turning speeds: 55 - 1.450 U/min bore spindles - Morse Taper: 4 MK engine output: 1,4 / 2,2 kW Weight: 440 kg range L-W-H: 1,3 x 0,9 x 1,87 m This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 101
item-No.: 126885016
Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck
Category: 205
item-No.: 126911983
bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 360 x 515 mm turning speeds: 125 - 2.250 U/min total power requirement: 1,5 / 1,9 kW weight: 270 kg height of the machine: 1,84 m This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 101
item-No.: 126885014
SUHNER drilling unit MONO MASTER BEM 20-125 2005. ï?§ The BEM 20 with HSK comes with an integrated 4-point clamping set form C, for manual tool clamping TECHNICAL DATA Total stroke 125 mm Max drilling capacity Ã? 20 mm / 600 N / mm² Feed force at 6 bar 4130 N Max uebertragb. Torque 80 nm speed range at 50 Hz 360-10000 min-1 30 - speed 2400 min-1 Air consumption 0.45 l / cm stroke Runout accuracy 0.01 mm Steplessly adjustable stroke 125 mm Inductive limit switches 20-250 ...
Category: 205
item-No.: 126911799
-
used machinery auction RESALE 75 €
Land-de DE
Weight approx.: 80 kg Dimensions (l x w x h) approx.: 1400 x 800 x 1400 mm Description: Drilling unit power 1.1 kW, profiling unit 4 kW, spindle length approx. 80 mm, working length approx. 730 mm
Category: 101
item-No.: 126869339
Technical data: -Drilling capacity in steel ST 60 50 mm -Spindle mount Mt 5 -4 feeds 0.12; 0.19; 0.26, 0.40 mm / Rev -Drilling spindle stroke 240 mm -12 spindle speeds 56-1250 RPM -RADIUS 360 mm -Distance from base plate - spindle 740-1320 mm -MOT mot cross table. Round table 800 mm -Drive 400 V / 4,5 kW -Space requirement approx. B H 1200 x 2400 x D 1700 mm -Weight approx. 1700 kg
Category: 101
item-No.: 126911808
1990
used machinery auction RESALE 1.200 €
Land-de DE
Weight approx.: 3700 kg Dimensions (l x w x h) approx.: 2500 x 1100 x 2700 mm Description: Drilling diameter 50 mm, distance spindle center to column 350 to 1600 mm, boom travel path 1250 mm, vertical travel path 580 mm, holder Morse taper 5, spindle speeds 25 to 2000 rpm, including 2 clamping cubes, see photos and PDF for details Payment and loading has to be done until calendar week 30 the latest, otherwise the costumer has to carry the additional costs for the redistribution
Category: 101
item-No.: 126869276
Technical data: -Drilling capacity in steel ST 60 32 mm -Drilling capacity in steel ST 60 40 mm -Long spindle MK 3 -Thread cutting device -Spindle speed infinitely variable - level 1. 160-1125 U/min -Level 2. 320-2250 U/min -Drilling spindle stroke 120 mm -Feed 0.1 + 0.2 + 0.3 mm / Rev -Unloading 293 mm -Column diameter 115 mm -Table size 420 x 380 mm -E. footswitch -Coolant system -Machine vise -Keyless drill Chuck 1-13 mm -20 St. div. HSS drill bit approx. 8 ...
Category: 101
item-No.: 126911824
Weight approx.: 120 kg Dimensions (l x w x h) approx.: 750 x 1300 x 1800 mm Description: With thread attachment and automation device, 160 to 800 rpm, table 250 x 250 mm
Category: 101
item-No.: 126869254
X-travel: 500mm, y-travel: 380mm, z-travel: 300mm, table dimensions: 650x380mm, max. table load: 200kg, table spindle distance: 240-540mm, reach: 350mm, tool mount: SK 30, rotational speed: 1500-6000/min, rapid traverse: 15m/min, max. drilling capacity steel: 20mm, connected load: 12kW, controls: FANUC Series O-Mate M, weight: 2.3t, tool changer defective, available after November 2018.
Category: 205
item-No.: 126911844
-
used machinery auction RESALE 350 €
Land-de DE
Weight approx.: 1000 kg Dimensions (l x w x h) approx.: 2000 x 1600 x 2100 mm Description: 4 Drill motors, each 2.2 kW, 2 slot/slit drilling motors, each 3 kW, motor for oscillation 1.5 kW, holder of slot drill 3 to 16 mm, clamping chuck holder slit drill 13 mm, stroke of drilling units 100 mm, slot length max. 130 mm, max. tilt of hole drilling units 35° on 2 axes, max. tilt of the slit drilling units 22° on vertical and 28° on horizontal axes
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more DRILL types: