Category: 101 boring mills and machining centers
Latest update: 04.03.2024 add to watchlist
approved
dealer
item-No.: 121909869
New in: 2007

used

check Seller: Schweizer Service
Location: Land-de

add to watchlist

Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm *** General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter *** Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel

Category: 103 milling machines / CNC Bed Milling Machines
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 161626188
New in: 2007

used

check Seller: Schweizer Service
Location: Land-de

add to watchlist

Complete system with all the accessories necessary for installation and operation, see below! x = 7000 y = 1600 z = 800 / transverse stroke w = 600mm General overhaul 2007, year of production 1991 New Siemens Sinumerik 840D control system, new drive motors, guide guides refurbished, new control cabinets. Travel speed 12000 mm / min / w axis 6000 mm Rotary table TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 such as new angle crank / chain tool change system / plate field / complete housing / Knoll hopper feed / suction / coolant system with belt filter incl. all BWF fixators for the installation of machine bed and plate

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817405

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 1 Number of axis total: 5 Longitudinal travel (X-axis): 1500 mm Transversal travel (y-axis): 1200 mm Vertical travel (z axis): 1250 mm Table divisions (B): 360x0.0001 ° A axis Table speeds: up to: 1 - 500 rpm number: 2 Length: 1000 mm Width: 1000 mm Transport weight: 2000 kg Tool changer: Number of tools: 161 Tool diameter: 300 mm Max. tool-weight: 25 kg Spindle nose:: HSK-A 100 Spindle speeds: stepless from: 10 rpm up to: 4000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 40 kW Total power required: 180 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 8500 mm Width: 4800 mm Height: 4800 mm Various accessories: Full splash cabin Coolant sy ...

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817573

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 1 Number of axis total: 5 Longitudinal travel (X-axis): 1500 mm Transversal travel (y-axis): 1200 mm Vertical travel (z axis): 1250 mm Table divisions (B): 360x0.0001 ° A axis Table speeds: up to: 1 - 500 rpm number: 2 Length: 1000 mm Width: 1000 mm Transport weight: 2000 kg Tool changer: Number of tools: 161 Tool diameter: 300 mm Max. tool-weight: 25 kg Spindle nose:: HSK-A 100 Spindle speeds: stepless from: 10 rpm up to: 4000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 40 kW Total power required: 180 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 8500 mm Width: 4800 mm Height: 4800 mm Various accessories: Full splash cabin Coolant sy ...

Category: 104 grinding machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158219347

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Magnetic chuck diameter: 1500 mm Grinding height: 0 mm Grinding wheel diameter: 1500 mm Spindle power: 45 kW

Category: 102 lathes / Carousel Turning Machines (Lathes)
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163589663

used


add to watchlist

faceplate diameter: 2500 mm swing diameter: 2900 mm turning height: 1650 mm slides vertical travel: 850 mm side head - cross travel: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes / Vertikal Turning Machines (Lathes)
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163541314
New in: 1973

used

check Seller: Surplex GmbH
Location: Ettlingen Land-de
Price: used machinery auction RESALE 4.000 € add to watchlist

Description: Turning diameter approx. 1500 mm Table diameter 1250 mm Turning height approx. 1400 mm upgraded with digital display with attached slewing crane weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 3,500 x 4,800 mm

Category: 102 lathes
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156642617
New in: 1992

used

Location: Land-de

add to watchlist

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW  ...

Category: 103 milling machines / Travelling column milling machines
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 162436922
New in: 2007

used

check Seller: Schweizer Service
Location: 89522 Heidenheim Land-de

add to watchlist

Key data: 7000 mm, 1600 mm, 800 mm

Complete system with all the accessories necessary for installation and operation, Travel x = 7000 y = 1600 z = 800 / transverse stroke w = 600mm / General overhaul 2007, year of production 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides refurbished, new control cabinets. ECOCUT 1 was then operated for only a few months / Travel speed 12000 mm / min / w axis 6000 mm / min turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angle crank / chain tool change system / plate field / complete housing / Knoll hopper feed / suction / coolant system with belt filter All BWF fixators for the installation of machine bed and plate

Category: 101 boring mills and machining centers / Panel Drills
Latest update: 07.12.2023 add to watchlist
approved
dealer
item-No.: 141287568
New in: 2003

used

check Seller: Pesch Machines SA
Location: 4700 Eupen, Handelsstrasse 4 Land-de

add to watchlist

Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003

Category: 103 milling machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163669659
New in: 1983

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

X-travel: 2000mm, y-travel: 1450mm, z-travel: 1400mm, quill stroke: 600mm, max. load: 12t, table dimensions: 1250x6000mm, length: 6150mm, width: 5050mm, height: 4430mm, weight: 24.35t, with documentation.

Category: 101 boring mills and machining centers
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163668251
New in: 1986

used


add to watchlist

spindle diameter:125 mm x-travel:5600 mm y-travel:1600 mm z-travel:800 mm spindle stroke:600 mm spindle taper ISO:50 spindle turning speed range:12 - 3000 U/min spindle drive:40 kW rapid speed:15 m/min total power requirement:65 kW weight of the machine ca.:60 t dimensions of the machine ca.:12,1 x 4,8 x 3,9 m with CNC HEIDENHAIN iTNC 530 modernized in 2003 automatic toolchanger 60 pockets boring table make: RÜCKLE 2000 x 1800 mm max. 20 to. load floor plates 3500 x 2000 and 2500 x 2000 mm coolant attachment

Category: 103 milling machines
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 163283485

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: 45138 Essen Land-de
VS

add to watchlist

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Category: 104 grinding machines / Tool Grinding Machines
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163589905

used

check Seller: Surplex GmbH
Location: Velen-Ramsdorf Land-de
Price: used machinery auction RESALE 3.900 € add to watchlist

Description: Included - 3-axis digital display - Operation manual Spindle diameter 75 mm x-travel 850 mm y-travel 900 mm z-travel 950 mm Spindle holder ISO SK 40 Table size 1000 x 800 mm Total power requirement 16 kW Machine weight approx. 10.5 t Space requirement approx. 4.0 x 2.3 x 2.75 m weight approx.: 10,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,300 x 2,750 mm

Category: 101 boring mills and machining centers
Latest update: 26.02.2024 add to watchlist
approved
dealer
item-No.: 4777104
New in: 1972

used

check Seller: HILGERT AG
Location: Ottmarsheim Land-ch

add to watchlist

Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg

Category: 101 boring mills and machining centers
Latest update: 26.02.2024 add to watchlist
approved
dealer
item-No.: 163195
New in: 1961

used

check Seller: HILGERT AG
Location: Ottmarsheim Land-ch

add to watchlist

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

Category: 101 boring mills and machining centers / Table Drills
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 126885015
New in: 1960

used

check Seller: FORMEX SK s.r.o.
Location: Land-sk
Price: 3.000 € add to watchlist

Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck

Category: 110 accessories for machine tools / Facing Heads With 1 Or 2 Facing Slides
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 144050432

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: Land-de

add to watchlist

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

Category: 110 accessories for machine tools
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156366248

used

Location: Land-de

add to watchlist

spindle diameter: . mm x-travel: . mm y-travel: . mm table length: 2000 mm table width: 2000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156642197
New in: 1972

used

Location: Land-de

add to watchlist

spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1400 mm z-travel: 1400 mm spindle taper ISO: 50 table surface area: 1000x800 mm table load: 12 t number of spindle speeds: 8-1650 U/min digital readout: total power requirement: 12 kW weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers / Table Drills
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156642250
New in: 1986

used

Location: Land-de

add to watchlist

spindle diameter: 150 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 1500 mm w-axis: 700 mm spindle taper: ISO 50 control: Siemens type: 850 M mm table surface area: 2000x1600 mm Table load: 12000 kg turning speeds: 12-3000 U/min spindle motor: 30 kW feed: 0-6 m/min chip conveyor: coolant: total power requirement: 60 kW weight of the machine ca.: 40 t dimensions of the machine ca.: 8x6,3x5,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156642413
New in: 1989

used

Location: Land-de

add to watchlist

x-travel: 2000 mm y-travel: 1600 mm z-travel: 1000 mm module: Siemens 850M mm w-axis: 600 mm b-axis: 360 ° spindle taper ISO: 50 Torque: 2350 Nm output: 40 kw spindle turning speed range: 28-2800 U/min : max 7 bar Feed: 1-3000 mm/min b-axis: 2,7 U/min size of pallet: 1500x1500 mm table load: 8 t T-slots: 22H7x 22 mm Tief flute distance: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156642459

used

Location: Land-de

add to watchlist

spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156642512

used

Location: Land-de

add to watchlist

spindle diameter: 132 mm x-travel: 2000 mm y-travel: 1350 mm z-travel: 2340 mm table surface area: 2000x1500 mm spindle stroke: 1000 mm turning speeds: 3,5-1000 U/min Radial face slide: 600 mm Radial face slide: 3,5-100 U/min Feed: 2250 mm/min spindle taper ISO: 50 Table load: 15000 kg total power requirement: kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x3,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 156649271
New in: 1951

used

check Seller: FEYEN Maschinen GmbH
Location: ab Lager Krefeld Land-de

add to watchlist

spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
DOERRIES SCHARMANN 3rd category level
  • DOERRIES SCHARMANN cnc bed milling machines (1)
 
RESALE used machinery 25 years online