We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Group of 4 mixing silos DEGA Model MVP5000, with internal mixing system, loading and unloading, capacity 5000 lt. (the cost refers to a single silo)
used
GRAVIMETRIC FEEDING AND BATCHING THROUGH INTEGRATED PRODUCTION SUPERVISION Gravimetric dosing particularly suitable for injection moulding, blow moulding machines and extruders, filling and packaging machines for granulated and powdery materials. The solid steel machine frame and the particular software allow its installation even on machines with constant and controlled vibration. The different types of construction allow the combination of 2 to 6 components, differently dosed in small amounts with normal dosing screw.
Description DEGA Dehumidification System with 2 Receivers controlled by a Blower Heating power: 9 Kw Blower power: 2.2 Kw Total installed power: 18 Kw Refined air flow: 250 m3/h Maximum Process Temperature: 150 °C Hopper capacity: Approximately 650 litres
used
AVIAN Engineering Model G46/ 60 Pinch Infeed Rollers Integral Blower Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs ThruPut 300 KG/H Cutting Chamber 620 x 460mm Hopper Opening 620 x 500mm
used
Granulator Manufacturer: Rapid Type: 1514 Year of construction: 2000 - Device tested, cleaned and ready for use -
used
GUANGZHOU PC2660S plastic mill was manufactured by Chinese granulator manufacturer Guangzhou 3E Machinery Co. in 2018. The structure of the cascade knife granulator is made of high quality steel, ensuring rigidity, high efficiency and long service life of the machine. The machine is equipped with a rotor (cutting knife arrangement) with a cascade layout, consisting of 3 rows of 6 knives each. The rotor is 600mm long, 600mm wide and has a diameter of 260mm. The moving knives operate at a speed of 607 rpm. The drive system has a massive drive wheel, and the drive is transmitted via V-belts to the rotor pulley. The total weight of the machine is 1060 kg. Technical parameters of granulator GUANGZHOU PC2660S - layout of cutting knives: cascade - number of rotor knives: 3 rows x 6 pcs. - number of stationary knives: 2 rows x 2 pcs. - rotor length: 600 mm - rotor width: 600 mm - rot ...
used
Including bottling line Rotor diameter: 320 mm Rotor width: 440 mm Drive motor 11 kW Weight approx. 800 kg
used
PONAR ŻYWIEC SG-180FE-2B plastic mill built in 2011, is designed for crushing of plastic waste. Made of high quality steel, the plastic mill with dust exhaust ensures high rigidity of construction, high efficiency and long service life. The main advantages of the device are its comfortable operation and low noise level during machine’s work. SG 180FE 2B granulator is equipped with 9 rotary knives and 2 fixed knives with a length of 180 mm, capable of milling up to 30 kg of plastic elements per hour. The machine is offered with dust extraction. Total weight of the machine is 120 kg. Technical data of granulator PONAR ŻYWIEC SG-180FE-2B - length of blades: 180 mm - number of rotary blades: 9 - number of fixed blades: 2 - capacity: 30 kg/h - maximum rotation speed: 940 rpm - throat depth: 200 x 220 mm - dust extraction - motor power: 1,5 kW - power supply: 380 V; 50 Hz - ...
used
Rotor Ø: 340 mm Working width: 410mm Motor power: 11-18.5 kW Rotor cutting strips: 5 Stator cutting strips: 2 Insertion opening: approx. 410 x 340 mm Capacity depending on plastic and screen size: approx. 130-400 kg/h Granulate conveyor: 1.1 kW Net weight: approx. 1640 kg Gross weight: approx. 1865 kg Box dimensions: approx. 2.2 x 1.7 x 1.6 m Feed belts with silencer Centre distance: 3700 mm Belt width: 400mm Net weight: approx. 296 kg Gross weight: approx. 430 kg Box dimensions: approx. 0.8 x 0.8 x 4.4 m - Overhaul in 2022 - Real bevel cut - Integrated sound insulation - Conveniently designed grinding room - Safe material acceptance - Optimum granulate quality - Built-in granulate conveyor system - Easy maintenance and cleaning - Tested occupational safety Ø of rotor: 340 mm Useful width: 410mm Motor output: 11-18,5 kW Rotor blades: 5 Stator blades: ...
used
Ripper 2 axes of rotating shears. Brand: Sant Andrea, cutting chamber: 450x400 mm, motor: 7,5 hp.
used
Propulsion: 22 kW With control cabinet and sound insulation
used
ZERMA GSE 700 plastic granulator machine manufactured in 2018, is used in the processing of lightweight plastics such as PE, PP or PVC. The granulator has a specially shaped hopper with splash protection, inside of which there are fixed knives and a rotor with knives arranged in a ‘V’ shape. The rotor is driven by a slide-rail-mounted electric motor with tension-screw adjustable V-belts. The ZERMA GSE 700 plastic granulator machine can even cope with larger pieces of plastic, such as lumps and film rolls, thanks to the use of a deflecting wedge and block knives to prevent the rotor from blocking. All of the machine’s components are mounted on a base frame, fitted with mounting pads to dampen noise and vibration.
used
This Herbold grinding mill is in machine storage at Plastima Used Machinery. The machine is in good condition for its age and has been disconnected in working state. The machine is from 1986. – Brand : Herbold – Model: SMS 45/30-F9-3 – Year built: 1986 – Working hours : Unknown
used
Granulator RAPID 15-14 Stock No.: 503328 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces
used
Granulator RAPID 15-14 Stock No.: 503329 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1997 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces
used
Granulator RAPID 15-14 Stock No.: 503330 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces
used
Granulator RAPID 15-14 Stock No.: 503332 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces
used
Granulator RAPID 15-14 Stock No.: 503333 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces
used
Granulator RAPID 15-14 Stock No.: 503372 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces
used
Brand: Mateu I Solé, model: B-10, cutting chamber: 450x280 mm, stepped rotor, motor: 7.5 KW (10 hp). With electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Description: Extruder Plastmachines extrusion machine PME 80/35 Manufacturer: Plastmachines extrusion type: PME 80/35 Year of construction: 2004 Type of offer: second-hand machine Technical data: Plastmachines extrusion machine type: PME 80/35 control:-year: 2004 injection unit screw size mm: 80 additional information 75 KW power 250-300 kg / h degassing system complete granulation plant heating tee Kuehlsiepsystem 75 KW power 250-300 kg / h degassing complete granulating heating tea cooling system siep
used
Cable granulation system RMH 2 D Granulator: 11 KW Connection value: 19.6 KW Weight: 2.450 kg Capacity: 100-250 kg/with shredder up to approx. 300 kg/H Optionally available with shredder/belt system with permanent magnet
used
Sell granulator for plastic strands of extrusion. 7,5 kW power. Sale, clearance there. If it works, I don't know, therefore the reasonable sale price.
used
The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating. Â When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...
used
The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating. Â When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...