Category: 103 milling machines
Latest update: 17.01.2024 add to watchlist
approved
dealer
item-No.: 213904
New in: 1981

used

check Seller: Ingenieurbüro Lenhart
Location: Land-de
Price: VB 11.500 € add to watchlist

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Category: 110 accessories for machine tools
Latest update: 27.11.2023 add to watchlist
item-No.: 4230000

used

Seller: KS Maschinenservice
Location: Essen Land-de
Price: 55 € add to watchlist

Why do you need an oil drip tray? Avoid large and expensive damage to your feed motor and the destruction of the drive amplifier. Here a brief explanation: Bed rail oil, which then drips down accumulates at 1. 2 Lands the oil accumulates in the cooling fins of the engine and continues on the way down. At 3, the oil eventually accumulates around then, fatally, after the feed motor to penetrate, which is destroyed as a result. High repair costs and a failure of the machine are the result. But it doesn't have to be. Simply mount the oil drip tray (at no. 2) on the motor (for the spindle drive). The oil drips now at 4 in the tray. Running at 5, the lowest point of the shell in there attached expiration. The oil makes its way through the hose 6 and is headed directly into the oil collecting tray of the machine 7. How to save costly repairs and down time of the machine.

Category: 103 milling machines
Latest update: 30.08.2021 add to watchlist
approved
dealer
item-No.: 4366501
New in: 2013

used

check Seller: AWM GmbH
Location: Haiger Land-de
Price: 750 € add to watchlist

Data sheet / Offer spare Monitor Deckel Controls Dialog 11 Dialog 12 Overview: - 12,1“ industrial monitors TFT substitute with 14“CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a Sub-D conector 25pol. he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation

Category: 104 grinding machines
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 1066561

used

check Seller: Maschinen Stumpf GmbH
Location: Land-de
Price: 680 € add to watchlist

univ. Tool sanding machine p. 1 with Fraesstichelschleifvorrichtung as good as new + drill special admission + Fraeslageraufnahme + instep tongs + Schleifscheiben - Abrichtvorrichtungshaube with diamonds engine power: 0.37 kW 1,450 revos 50 hertz

Category: 110 accessories for machine tools
Latest update: 27.11.2023 add to watchlist
item-No.: 4010041
New in: 1976

used

Seller: KS Maschinenservice
Location: Essen Land-de
Price: 2.450 € add to watchlist

Mechanical dividing head for E.g. FP1 and FP3 all parts complete!refurbished! and repainted Dividing head with the following accessories & #9726;.Faceplate & #9726;.Vise handle & #9726;.Grease gun with a suitable attachment optional accessories & #9726; three-jaw Chuck with key & #9726;.Four-jaw Chuck with key

Category: 110 accessories for machine tools
Latest update: 27.11.2023 add to watchlist
item-No.: 4229998
New in: 1985

used

Seller: KS Maschinenservice
Location: Essen Land-de
Price: 3.270 € add to watchlist

Reconditioned new safety switches painted with adjustable guard from 1900 up to 6000 RPM over pulley adjustable

Category: 110 accessories for machine tools
Latest update: 27.11.2023 add to watchlist
item-No.: 4712600
New in: 1976

used

Seller: KS Maschinenservice
Location: Land-de
Price: 2.290 € add to watchlist

Shock head for cover FP1 and FP2 General overhaul new store and painted. Shock length 80 mm

Category: 103 milling machines
Latest update: 13.11.2023 add to watchlist
approved
dealer
item-No.: 90778444

used

check Seller: Zölch GmbH & Co. KG
Location: Land-de
Price: 2.500 € add to watchlist

; very good

Category: 109 other metal working machines
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 119626117

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: 46240 Bottrop Land-de
VS

add to watchlist

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price

Category: 103 milling machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 5378709

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Description The machine was without Accessories: Spannznangen, div. end mill holders. Technical data: x away the 300 mm y away 150 mm z away 340 mm Table 210 x 600 mm Spindle speeds 40-2000 RPM. Feed 10 500 rpm. Recording ISO 40

Category: 103 milling machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 5378725

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Technical data: X away the 800 mm Y away 300 mm Z away 400 mm Speed 40-2000 RPM. Recording ISO 40 Feed 10 500 mm / min. Spindle motor 2,2 KW

Category: 109 other metal working machines
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 123413959

used

check Seller: AUER
Location: A - Oberösterreich Land-at

add to watchlist

Technical data: X away the 800 mm Y away 300 mm Z away 400 mm Speed 40-2000 RPM. Recording ISO 40 Feed 10 500 mm / min. Spindle motor 2,2 KW

Category: 103 milling machines / CNC Milling Machines
Latest update: 27.11.2023 add to watchlist
item-No.: 13567493
New in: 1984

used

Seller: KS Maschinenservice
Location: Essen Land-de

add to watchlist

!!! Needed! FP 4NC SK40 / dialog 4 contouring Control: CNC dialogue 4 - 3D contouring speed: 25-3150 RPM Feed: 1-3600 mm / min stepless Rapid traverse rate: 4 m / min Drive performance: 2,0 / 4,0 kW 1430 / 2830 RPM Travel: X/Y/Z 560/450/450 mm Angle table: Solid angle table 530 x 900 mm of maximum capacity 450 kg Version: Vertical & horizontal spindle; Vertical Quill 80 mm extendable Splash Guard cabin; Milling head manually swiveling options: machine light / E Handwheel / NC rotary table / dividing head, etc.

Category: 103 milling machines / CNC Milling Machines
Latest update: 09.02.2024 add to watchlist
approved
dealer
item-No.: 21696574
New in: 1989

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Table size: 460 x 800 mm stroke x: 485 mm traverse path y: 385 mm traverse path z: 380 mm Quill stroke: by hand approximately 70 mm spindle speeds: 50-3150 rpm stufenl feeds. adjustable: 2-1000 mm / min rapid traverse rate: 2 m / min. Port: 3.7/4,4 kW space: 2100 x 1650 x 1730 mm weight: 1850 kg

Category: 103 milling machines / Milling Machines
Latest update: 30.08.2021 add to watchlist
approved
dealer
item-No.: 148807346
New in: 1990

used

check Seller: AWM GmbH
Location: Land-de
Price: VB 9.950 € add to watchlist

CNC toolmill cover FP 3 NC Dialog 11 Used machine (very good) Control type Cnc Built 1990 Hours K.a. Dimensions 1800x1700x2000 Weight 2000 kg Location Haiger Description Universal tool milling machine of the brand lid suitable for tooling, fixture construction, training as well as mold making • Travel distances: 400x400x400mm • Control: Dialog 11 Technical data • Control CNC Dialog 11 • Table 600x400mm • Longitudinal path (X,Y,Z axis) 400x400x400mm • Tool changer no • Tool holder: ISO 40 • Vertical spindle speeds: 31.5-3150rpm • Feeds 2-3600mm/min • Connection 50 Hz 3x 380V • Spindle motor 3.4KW

Category: 103 milling machines / Milling Machines
Latest update: 30.08.2021 add to watchlist
approved
dealer
item-No.: 148882349
New in: 1990

used

check Seller: AWM GmbH
Location: 35708 Haiger Land-de
Price: VB 8.000 € add to watchlist

Lid FP 4 MA Used machine (Very good) Control type CNC Built in 1990 Operating hours n/a Price 8,000 net plus VAT Dimensions 2500x2000x2500 Weight 1800 kg Location Haiger Description Universal tool ingescent machine of the brand lid suitable for tooling, fixture construction, training as well as mold making Travel: 465x385x380mm Control: Contour 2 Technical data Technical data: Lid FP4 MA (527) Built in 1992 Control CNC Hand / Contour 2 Table 800x465mm Laengsweg (X,Y,Z axis) 465x385x380mm Tool changer no Tool holder: ISO 40 Vertical spindle speeds: 31.5-3150rpm Vorschuebe 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW Machine weight approx. 1900kg Dimensions 2800x2000x2500mm

Category: 103 milling machines / Milling Machines
Latest update: 30.08.2021 add to watchlist
approved
dealer
item-No.: 148882375

used

check Seller: AWM GmbH
Location: 35708 Haiger Land-de
Price: VB 7.500 € add to watchlist

Description x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in very good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch incl. digital display (new)

Category: 103 milling machines / CNC Milling Machines
Latest update: 02.04.2023 add to watchlist
approved
dealer
item-No.: 153772664
New in: 1987

used

check Seller: HWM Werkzeugmaschinen GmbH
Location: Land-de
Price: 8.500 € add to watchlist

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

Category: 103 milling machines
Latest update: 27.11.2023 add to watchlist
item-No.: 101546715

used

Seller: KS Maschinenservice
Location: Essen Land-de

add to watchlist

Universal lid round table! Reconditioned, as good as new! Mechanical rotary table for cover FP machines Technical data • 360 degree rotatable, 15 / + 45 degree vertical swivel, 45 +/-degrees horizontally swiveling • To enable direct measuring system in the control (c axis) • Table top 520 x 820, 8 grooves, distance 63 mm, width 14 mm, • butterfly area: see drawing, suitable for all cover machines • Option: expansion of 4 Achse(Heidenhain EXE und / oder Achszählerkarte)

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 20.02.2024 add to watchlist
approved
dealer
item-No.: 105019939
New in: 1992

used

check Seller: Alfred Feldmann Werkzeugmaschinen
Location: Michelstadt Land-de

add to watchlist

3-axis machining center X: 560 mm Y: 500 mm Z: 390 mm Rapid traverse rate: 4 m / min Table load: 800 kg Speed range: 4000 RPM Spindle retainer: SK 40 Headstock speed range: 4000 RPM Spindle drive: 4 kW Control: Dialog 11 Electr. Handwheel Coolant system direct measuring system Documentation Total power: 19 kW Machine weight: approx. 2.8 kg Dimensions (W x D x H): 3.66 x 3.5 x 2.1 m

Category: 109 other metal working machines
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 119625892

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: 46240 Bottrop Land-de
VS

add to watchlist

Fine drilling head for lid fraes machine, probably FP2, SK40, little used condition. Special price

Category: 103 milling machines
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 119625991

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: 46240 Bottrop Land-de
VS

add to watchlist

Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet

Category: 103 milling machines
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 119625998

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: Land-de
Price: 890 € add to watchlist

Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price

Category: 103 milling machines / CNC Universal Milling Machines
Latest update: 27.11.2023 add to watchlist
item-No.: 121883938

used

Seller: KS Maschinenservice
Location: Land-de
Price: 480 € add to watchlist

Newly painted Size (LxWxH): 100cm x 70cm x 23cm

Category: 104 grinding machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157811487

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Transversal way of the table: 260 mm Vertical adjustment of the table: 50 mm Vertical adjustment of grinding head: 50 mm Table swivels: 360 ° Slewing range of grinding head: horizontal: 360 ° vertical: 220 ° Grinding spindle speeds: number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Height: 1500 mm Various accessories: Set of collets Dividing attachment 3-jaw chuck diameter: 85 mm Spiral flute grinding attachment

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
DECKEL 3rd category level
 
RESALE used machinery 25 years online