used DMC Processing Centers

DMC DL 8T 2 axis cnc lathe Fanuc control unit Swing over Bed(Max. wing dia.): 480 mm Max. Turning Dia.: 280 mm Machine is in excellent condition

– Italian production – transverse aggregate, the so-called sergeant – year of manufacture 2011 – electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum element length 365 mm vacuum table 1 unit: transverse tape, the so-called sergeant engine power 12 kW 2 aggregate: rubber shaft hardness 95 shore diameter 240 mm engine power 18.5 kW 3 aggregate: rubber shaft hardness 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 unit – cleaning brush 2.2 kW 6 aggregate – blowing blowing on the tape pneumatic oscillation feed speed 2,5 - 18 m/min pneumatic tape tension electric height adjustment connection diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (L/W/H) 370 / 250 / 250 cm weig ...

– after technical inspection TECHNICAL PARAMETERS: .max. workpiece width 110 cm .max. workpiece height 16 cm 2 aggregates: 1) AGGREGATE RUBBER roller 2) aggregate with combo boot with pneumatic pressure rollers, rubber, pressure between aggregates oscillation of pneumatic tapes automatic belt centering system potentiometer for setting the planing thickness FEED SPEED SMOOTHLY ADJUSTABLE power of the first unit 18,5 kW power of the second unit 11 kW working pressure 6-8 bar extraction connection diameter 2 x 250 mm dimensions (L/W/H) 195 / 185 / 215 cm weight 1750 kg

x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm B-axis (table): 360 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: DMC, Type: Unisand K USK 1350 M3, Year: 2011, Software: DMC, Monting of the machine: Walze/Walze/Schuh, Sanding width mm: 1350, Number of sanding belts: 3, Rubber roller: 2, Längsschleifaggregate: 3, Weight in kg: 5350, Year :2011

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,

Manufacturer: DMC, Type: UNISAND K/USK1100M3, Year: 2007, Monting of the machine: L/L/L , Equipment of machine 2: L/L/L, Double sided sanding line: yes, Sanding width mm: 1100, Number of sanding belts: 3 + 3, Weight in kg: 4050, Year :2007

Manufacturer: DMC, Type: Masterbrush S 1350 DBB, Year: 2017, Number of units: 2+1, Working widht mm: 1350, Through running hight max mm: 3-200 mm, Diameter of brushes: 300 mm, Through running hight max mm: 3-200 mm, Feeding speed continous adjustable: 2-16 m/min, Year :2016

Control: iTNC 530 Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Twin Pallets Coolant tank:2500l With spindle cooling, mea

Control: Mill plus Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Four Pallets Coolant tank:2500l machine has spindle cool

SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER DMC MOD. UNISAND 2000-I M3 - CE RULES - bottom machine: * steel roller diam. 250 mmm. - motor 25 kw * rubber roller diam. 320 mm. - motor 18.5 kw * rubber roller diam. 320 mm. - motor 15 Kw * pressers shoes * on/off - top machine: * steel roller diam. 250 mmm. - motor 25 kw * rubber roller diam. 320 mm. - motor 18.5 kw * rubber roller diam. 320 mm. - motor 15 Kw * pressers shoes * on/off - working widht mm. 1350 mm. - control panel - vacuum - s/n SA/004163 - year 2000

Description: Max. machining width 1350 mm Min. machining thickness 4 mm Max. machining thickness 200 mm Forward feed belt , with speed adjustment by NC Motor power 4 KW Fan for belt vacuum hold down , no. fans 1 Operating units 5 OPERATING UNITS 1 Unit : sander unit : band OPERATING UNITS 2 Unit : roller unit : in rubber roller diameter : 320 mm motor power : 15 KW sanding belt width : 1370 sanding belt extension : 2620 OPERATING UNITS 3 Unit : pad Pad : vertical Segmented pad : , With superfinishing belt , with adjustable speed by NC , motor power : 15 KW sanding belt width : 1370 sanding belt extension : 2620 OPERATING UNITS 4 Unit : brush unit : top brush diameter : 200 OPERATING UNITS 5 Unit : blowers Control system HYDRA PC Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: serial number: SA/004186 Technical specifications: sanding width approx. 1350 mm workpiece thickness from 4 mm up to 170 mm vacuum transport belt, vacuum unit power 7,5 kW belt conveyor with variable feed speed: 3,5-18 m/min feed motor power 2,2 kW aggregate 1: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 2: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 3: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 4: antista ...

Table clamping surface: 2 x 350 x 300 mm traverse path x/y/z: 700/300/250 mm spindle retainer: BT 30 ISA kl. / gr. Table/spindle distance: 450 mm spindle speeds: 6-6000 rpm number of tool stations: 10 pieces feeds: 5-10000 mm / min rapid traverse: x & y/z 25/20 m / min spindle drive: 3,1/4,1 kW Electr. Supply: 400 V kW weight: 2600 kg

Weight: approx.4500 KG mash. No.: 6517991 General/technical data: Vertical CNC machining center in a very good, almost new condition, first-hand with very little operating hours. Travel: X= 670 Y=450 Z=470 mm Rapid response: in X and Y = 24m/min, in Z =20m/min Spindle motor: 10 KW Spindle speed: from 50 to 4,500 rpm Spindle cone: SK 40 Control: Siemens 810 M GA 2 Dimensions clamping table: 900 x 420mm max table load: 300 kg Distance spindle head to top of the table: 630mm spindle center to stand face: 470mm Tool slots in the magazine: 24 pieces DIN ISO 40 max. tool diameter: 110mm to 125mm tool length 100mm to 280mm tool length Beuvvquh2i Dimensions of the machine approx.: 2200 x 3000 x 2950 mm (without operator, service and chip conveyor environment) Accessories/ Optional equipment: â?¢ external coolant system with 2 pumps â?¢ Chip conveyor with ...

FZ15KS HIGH SPEED 4 axis vertical machining center X: 550mm Y: 400mm Z: 360mm 4th axis original Peiseler CNC Siemens 840D Table surface 1050 x 450mm Toolchanger 48 posts ISO 40 Spindle speeds up to 12000 1/min with 4th axis Renishaw broken tool detector Coolant through spindle swarf conveyor Can be inspected under power in our warehouse. Mimu machine tools (Italy)

Table size: 1000 x 490 mm traverse path x/y/z: 800/510/500 mm spindle retainer: ISO 40 ISA kl. / gr. Table/spindle distance: 120/620 mm spindle speeds: 40-6000 rpm number of tool stations: 22 pieces feeds: x/y 1-3200 / z 1-2000 mm / min rapid traverse: x/y 1-3.2, z 1-2 m / min. Supply: 380 V, 19 kW space: 2850 x 2150 x 2600 mm weight: 3800 kg

Technical data: -Drilling capacity in steel ST 60 25 mm -Spindle mount MT 3 8 spindle speed 100 2700 RPM - spindle stroke 130 mm -4 feeds 0.1-0.3 m / U -RADIUS 270 mm -Column diameter 115 mm -Boring Unit + table height adjustable with hand crank on rack -Table dimensions 350 mm -Drive: 400 V / 0.8 / 1.1 kW -Space requirement approx. B H 800 x 1850 X 900 mm -Weight approx. 250 kg

MODEL: VERSAMATIC 400 TYPE: TV-MO SERIAL NUMBER: VS4 166 YEAR OF BUILD: 1995 CNC: HEIDENHAIN

-X-Way-700mm -Y-way-700mm -Z-way-700mm -Control-ITNC 530 -Spindle holder HSK A63 -Spindle speed-12000rpm -Plate changer with 7 pallets -Tool magasin with 120 -Internal cooling feeder-40bar -Spindle motor-20kW -Pallet size 500x500mm -Machine weight approx.16t -Top condition,to be visited under electricity

Machining center vertical S - plus 10 Manufacturer: Hartford BJ: 2016 Control Heidenhain ... TNC 640 Clamping table area ... 1150x520mm Axis X ... 1020mm Axis Y ... 520mm Axis Z ... 550mm Spindle speed ... 12000-_/min. controlled axes... 3 cooling ... 20bar ISO 40 Magazine places... 24 chip Conveyor Workpiece probe The machine is in good condition, possible to test under power.

Machining center vertical Speed 1110 Manufacturer: TRIMILL BJ: 2010 Control Heidenhain ... TNC 530 Clamping table area... 1300x1200mm Axis X ... 1100mm Axis Y ... 1000mm Axis Z ... 700mm Spindle speed ... 30-14000 rpm. controlled axes... 3 HSK A80 Total power demand ... 56kVA Machine Weight... 14500kg Rush.. 20m/min L x W x H ... 4400x5500x3810mm Workpiece probe Heidenhain TS740 Magazine places.... 10 Spindle cooling only with air new spindle 2017 The machine is in good condition, possible to test under power.

Control type: CNC Sinumerik 840D-SL x-way 1135 mm y-way 1050 mm z-way 750 mm table size 1400 x 1050 mm Table load 2500 kg max. workpiece size LxWxH 1400 x 1240 x 750 mm Speed 10000 rpm feed speeds X/Y/Z Axis 40000 mm/min Expressspeeds x/y/z 40000 mm/min Tool holder HSK-A100 HSK Number of places in the tool magazine 30 places max. tool weight 20 kg max. tool length 395 mm max. tool diameter 110 mm Machine height 3294 mm Drive power - spindle motor 44 kW machine weight approx. 17.9 t Space requirements approx. 15 m2 Information: Universal milling machine in mono BLOCK design (3-axis) - available September 2019 - only 3800 spindle hours, 13400 power-on hours Equipment / Accessories: - Coolant system - High-pressure pump - Chip conveyor - Hand-held panel - BALLUFF option - Documentation

YEAR: 08/2004 LONGITUDINAL CORSA: X 800 MM TRANSVERSE COURSE: Y 700 MM VERTICAL COURSE: Z 700 MM ASSE B INDEXED 1st PALLET (2) 500X500 MM CNC MAPPS MSG-501 TOOL WAREHOUSES 60 LOCATIONS ATTACK MANDRINO BT40 MANDRINO MASSIMA VELOCITY 12000 RPM POWER OF MANDRINO'S POWER 26 KW