used DECKEL Dividing Units

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Data sheet / Offer spare Monitor Deckel Controls Dialog 11 Dialog 12 Overview: - 12,1“ industrial monitors TFT substitute with 14“CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a Sub-D conector 25pol. he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation

univ. Tool sanding machine p. 1 with Fraesstichelschleifvorrichtung as good as new + drill special admission + Fraeslageraufnahme + instep tongs + Schleifscheiben - Abrichtvorrichtungshaube with diamonds engine power: 0.37 kW 1,450 revos 50 hertz

Technical data: X away the 800 mm Y away 300 mm Z away 400 mm Speed 40-2000 RPM. Recording ISO 40 Feed 10 500 mm / min. Spindle motor 2,2 KW

; very good

Description The machine was without Accessories: Spannznangen, div. end mill holders. Technical data: x away the 300 mm y away 150 mm z away 340 mm Table 210 x 600 mm Spindle speeds 40-2000 RPM. Feed 10 500 rpm. Recording ISO 40

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price

CNC toolmill cover FP 3 NC Dialog 11 Used machine (very good) Control type Cnc Built 1990 Hours K.a. Dimensions 1800x1700x2000 Weight 2000 kg Location Haiger Description Universal tool milling machine of the brand lid suitable for tooling, fixture construction, training as well as mold making • Travel distances: 400x400x400mm • Control: Dialog 11 Technical data • Control CNC Dialog 11 • Table 600x400mm • Longitudinal path (X,Y,Z axis) 400x400x400mm • Tool changer no • Tool holder: ISO 40 • Vertical spindle speeds: 31.5-3150rpm • Feeds 2-3600mm/min • Connection 50 Hz 3x 380V • Spindle motor 3.4KW

Lid FP 4 MA Used machine (Very good) Control type CNC Built in 1990 Operating hours n/a Price 8,000 net plus VAT Dimensions 2500x2000x2500 Weight 1800 kg Location Haiger Description Universal tool ingescent machine of the brand lid suitable for tooling, fixture construction, training as well as mold making Travel: 465x385x380mm Control: Contour 2 Technical data Technical data: Lid FP4 MA (527) Built in 1992 Control CNC Hand / Contour 2 Table 800x465mm Laengsweg (X,Y,Z axis) 465x385x380mm Tool changer no Tool holder: ISO 40 Vertical spindle speeds: 31.5-3150rpm Vorschuebe 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW Machine weight approx. 1900kg Dimensions 2800x2000x2500mm

Description x-path: 300 mm y-way: 150 mm z-way: 340 mm Clamping area: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed levels working spindle: 8 Feed range: 10 - 500 mm/min Feed levels: 8 Pinolene stroke: 60 mm Spindle holder: SK 40 Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.90 x 1.10 x 1.55 m Universal tool milling machine in very good condition, vertical head rotatable +/- 90° incl. drill pin with stroke 60 mm, horizontal spindle, automatic feed in X and Z direction, universal swivel table, turning and tilting range+/- 30°, swivel range+/- 90°, separate control cabinet + main switch incl. digital display (new)

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

Table size: 460 x 800 mm stroke x: 485 mm traverse path y: 385 mm traverse path z: 380 mm Quill stroke: by hand approximately 70 mm spindle speeds: 50-3150 rpm stufenl feeds. adjustable: 2-1000 mm / min rapid traverse rate: 2 m / min. Port: 3.7/4,4 kW space: 2100 x 1650 x 1730 mm weight: 1850 kg

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Transversal way of the table: 260 mm Vertical adjustment of the table: 50 mm Vertical adjustment of grinding head: 50 mm Table swivels: 360 ° Slewing range of grinding head: horizontal: 360 ° vertical: 220 ° Grinding spindle speeds: number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Height: 1500 mm Various accessories: Set of collets Dividing attachment 3-jaw chuck diameter: 85 mm Spiral flute grinding attachment

Table length: 2600 mm Table width: 600 mm Longitudinal X: 2200 mm Cross Y: 560 mm Vertical Z: 720 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D MACH-id   5110 MAKE       DECKEL MAHO TYPE         DMF 220 linear YOP            2002 SPECIFICATIONS Spindle Taper ISO/Bt        BT 40 kW power on spindle          35 kW X - Travel         2200 mm bed / plano / portal / moving column         Moving column Control         SIEMENS 840D Y - Travel        560 mm Z - Travel        720 mm Table Length x Width         2600 x 600 mm Table load in kG        22 ...

Table length: 500 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 450 mm Vertical Z: 400 mm Positions ATC: 32   Positions APC: 0   CNC Brand: Heidenhain CNC Model: 3D Mill Plus MACH-id    5060 MAKE        Deckel Maho TYPE          DMU 50 eVolution YOP             2003 SPECIFICATIONS Spindle Taper ISO/BtSk 40 kW power on spindle      35 kW X - Travel       500 mm Controll     Heidenhain 3D Mill Plus Y - Travel          450 mm Z - Travel          400 mm Table Length x Width      500 mm Table load in kG    200 Kg Spindle speeds / ranges       18000 Rpm ATC tool changer         32 Number off cont ...

Table length: 700 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 124 MACH-id   3609 MAKE    Deckel Maho TYPE  DMU 50 M YEAR   1998 SPECIFICATIONS    X - Travel   500 mm Y - Travel   400 mm Z - Trave    l400 mm Controll     HedienHain TNC 124 Table Length x Width   700 x 500 mm Table load in kG    200 Kg Spindle Taper    Sk 40 kW power on spindle   9 kW Spindle speeds / ranges   4500 Rpm DIMENSIONS Length   2610 mm Width     2700 mm Height   2500 mm  

Table length: 700 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 124 SPECIFICATIONS X - Travel    500 mm Y - Travel    400 mm Z - Travel    400 mm bed / plano / portal / moving column   3 + 2 Axis Universal CNC Milling machine Controll   HeidenHain TNC 124 Table Length x Width   700 x 500 mm Table load in kG   200 Kg Spindle Taper   Sk 40 kW power on spindle  9 kW Spindle speeds / ranges  4500 Rpm Number off controlled axis  3 + 2  

Table length: 700 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 124 SPECIFICATIES Verplaatsing  X - as   500 mm Verplaatsing Y - as  400 mm Verplaatsing  Z - as  400 mm Type bed freezer - bed / vloer / portaal VMC Besturing  Heidenhain TNC 124 Tafel afmeting lengte x breedte700 x 500 mm Tafel belasting in Kg 200 Kg Spindel opname Iso   Sk40 Vermogen aan spil kW  9 kW Toeren - Snelheden - Stappen  4500 Rpm Gereedschap wisselaarno ATC   Aantal gestuurde assen  3 + 2 AFMETINGEN Lengte 2600 mm Breedte 2700 mm Hoogte 2500 mm  

Table length: 700 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Siemens CNC Model: Sinumerik Shopmill SPECIFICATIES Verplaatsing X - as 500 mm Verplaatsing Y - as 400 mm Verplaatsing  Z - as 400 mm Type bed freezer - bed / vloer / portaal VMC Besturing     Siemens Sinumrik SHOPMILL Tafel afmeting lengte x breedte 700 x 500 mm Tafel belasting in Kg  200 Kg Spindel opname Iso  Sk 40 Vermogen aan spil kW 9 kW Toeren - Snelheden - Stappen 8000 Rpm Gereedschap wisselaar 18Aantal gestuurde assen 3 + 2 AFMETINGEN Lengte 2610 mm Breedte 2700 mm Hoogte 2500 mm  

3-axis machining center X: 560 mm Y: 500 mm Z: 390 mm Rapid traverse rate: 4 m / min Table load: 800 kg Speed range: 4000 RPM Spindle retainer: SK 40 Headstock speed range: 4000 RPM Spindle drive: 4 kW Control: Dialog 11 Electr. Handwheel Coolant system direct measuring system Documentation Total power: 19 kW Machine weight: approx. 2.8 kg Dimensions (W x D x H): 3.66 x 3.5 x 2.1 m

Engraving Cutter Fabr. DECKEL type SONMachine -No: 24196max. radius to be ground: 10 mmmax. lateral displacement of the cutter holders: 10 mmmax. Longitudinal displacement of the milling cutter holder: 40 mmmax. adjustable back grinding angle: 45 °Gr. bore of the collet: 17.5 mmSpeed of the grinding spindle: 4500 rpm.Drive power: 0.25 kWDimensions L x W x H: 500 x 420 x 1400 mmWeight approx .:67 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Grinding machine make DECKEL type SOMasch. -No: 89-24422 Year of construction 1989Technical specifications:gr. radius to be ground: 10 mmgr. lateral displacement of the milling cutter holders: 10 mmgr. Longitudinal displacement of the cutter holder: 40 mmgr. adjustable back grinding angle: 45 °gr.Bore of the collet: 17.5 mmGrinding spindle speed: 4500 rpm.Drive power: 0.25 kWDimensions L x W x H: 500 x 420 x 1400 mmWeight approx: 67 kgWith- baseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Single-edge milling machine make DECKEL type SOMachine -No: 81659 built in 1981 (table model)Technical specifications:Tool holder: 17.5 mmTaper collets: MK 1 / MK 2 / GAGrinding spindle speed: 4500 rpm.Adjustment of the tool holder: 10 mmLongitudinal shift: 40 mmMax. Relief grinding angle: 45 °Drive power: 0.25 kWSpindle speed: 2800 rpm.Weight approx: 32 kgExternal dimensions approx: 510 x 565 x 290 mmWith- grinding wheel- several colletsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC tool milling machine make DECKEL type FP 4 AMasch. Nr: 2284 0273 Year 1983 with GRUNDIG pattern control with screenworking areaX-way longitudinal: 485 mmY-way cross: 385 mmZ-way vertical: 380 mmPinolenweg: 80 mmVertical milling head displaceable on the headstock: 150 mm18 spindle speeds: 50 - 2500 rpm.Feed infinitely variable: 2 - 1000 mm / minRapid traverse X, Y and Z: 2000 mm / minSpindle mount: ISA 40Table surface v. Angle table: 800 x 460 mmpermitted table load: 400 kgDrive power: 3.7 / 4.4 kWOutside dimensions approx .: 1200 x 1750 x 2000 mmWeight approx .: 2000 kgWith- fixed angle table- aut. Tool clamping- Screen route control- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offeran ...