used DEBER Milling machine centers

Code 4923 DESCRIPTION Universal milling machine Make DEBER Model FU 1 Serial No. 228 Year Table 1250 x 300 mm Longitude table 750 mm Vertical table 405 mm Cross table 240 mm Spindle taper 40 ISO Speeds 40 - 2000 rpm Feeds X-Y-Z 14 - 700 mm/min Rapides 1 and 2 m/min Spindle motor 5,5 kW - 380 Volts Weight of machine 2000 kgs Accessories universal millinghead ( 2 x turnable ) Coolant Condition Machine is in very good condition

with (wide) swivelling vertical head table size 300 x 1,430 mm table paths: laengs (X-axis) 1,000 mm persive (Z-axis) 520 mm quer (Y-axis) 360 mm installation height under fraes spindle approx. 500 mm Extension of the fraesspindle min./max. 350 mm spindle holder SK 40 spindle speeds 25 - 1,200 rpm feed/rapid speed 12-900 mm/min spindle drive approx. 3 kW Total drive 3.4 kW - 380 V - 50 Hz weight 2,400 as kg;

STAMA Mod. MC 2 1997-325S pallet (Pendeltisch Peiseler ATK 520) Aufspannflaeche Pallet: 2 x 550 mm x 330 mm Max Werkstueckgewicht: 2x180kgs X = Y = Z 500 300 = 350 mm Min/Max Distance Spindelnase-Tisch: 200-550 mm rapid traverse X, Y, Z = 40/40/45 36 40 36 Werkzeuge ISO-9000 RPM Spindle IKZ CNC SIEMENS 840 c # 2 LEHMANN doppel 4. Achsen IKZ Unter Strom in unserem Lager It machined \\input shafts\\ (car power steering component) Special price for quick removal

A machining center with a pallet changer from the manufacturer Emco Famup is offered here. The machine was used in the training sector and is therefore in very good condition. Manufacturer: Famup Emco Model: MCP 70-50 Year of construction: 2013 Control: Siemens Sinumerik 840D with PCU20 Specifications: Spindle power 35 kW/S6 (22.5 kW/S1) Speed: 50 - 12,000 rpm Torque: 120 Nm/s6 (76 Nm/s1) Tool holder: ISO 40 DIN 69871 Drum magazine 30 tool positions Travel distances: 700x500x640 mm Rapid traverse X-Y-Z: 40 m/min Clamping surface: 600x450mm Pallet changer Machine dimensions: 4000x2500x3000 mm Machine weight: 5500 kg Conveyor Coolant system Switch-on hours: approx. 22,000 h Spindle hours: approx. 11,000 h Working hours: approx. 9,800 h

Quaser MF 630 five-axis milling machine. CNC control system Siemens 828D Travel in X/Y/Z axis (mm) 800/700/610

CNC vertical milling machining center Deckel Maho DMC 635 V ecoline.

Built in 1995 Heidenhain TNC 415 Table 1000 x 550 mm Travel X / Y / Z 850 / 630 / 500 mm SK 40 Tool changer with 32 tools Spindle speeds 30 - 4200 rpm Weight 5 to incl. touch probe Very good original condition! Only plastic and aluminium were milled on the machine. Price from location free loading.

Drilling and threading machining center. • MANUFACTURER: ROSSINI • MODEL: TR-3-TV • YEAR OF CONSTRUCTION: 1989.

Hartford PRO 1000 A machining center The article has been checked for function, the technical condition is perfect. Optical wear exist, the exact state of the article can be found in the article images. Qk0270k Workspace: X 1,020 mm, y axis 520 mm, Z axis 550 mm Accessories and details: HEIDENHAIN control iTNC 530 Ceramic bearing spindle 12000 RPM. Coolant d. spindle (20 bar) HEIDENHAIN Handwheel 24 - specialized magazine Vises and tools do not belong to the auction/scope of delivery! If you are seriously interested, appointments are welcome. Interested parties are always welcome. If you have questions, I am like available.

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2**) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3***) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4****) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Dia ...

5 Axis Universal Machining Center with Nikken Rotary Tilt Sub-Device and Erowa Pallet system Manufacturer DMG Model DMU 100T Built in 2003 Control MillPlus IT Travel X / Y / Z 1080 x 710 x 710 mm Nikken rotary tipping table 32-fold tool changer / SK 40 Erowa Robot Easy Automation Integration with 12 stations and 31 units Erowa clamping systems

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2**) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3***) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4****) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Dia ...

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

The CNC milling center HWACHEON VESTA 1050B 8K was manufactured in 2013. Technical parameters of the HWACHEON VESTA 1050B 8K milling center – CNC control: FANUC Series Oi-MD – table size: 1150×600 mm – X / Y / Z axis movement range: 1000/600/600 mm – maximum table load: 1000 kg – spindle speed: 8000 rpm – spindle power: 18.5 / 15 kW – spindle torque: 481/293 Nm – feed speed: 1-10000 mm / min – cone: BT-40 (BT-50) – number of tools: 24 – coolant tank capacity: 340 l – machine weight: 7200 kg – machining time: 14861 h Equipment of the HWACHEON VESTA 1050B 8K machining center – cooling through the spindle – chip conveyor – probes – cone BT-40

ELHA 6 Axis Horizontal Machining Center Xpert-K High-Performance Horizontal Machining Center The newly designed DEPO XPERT K horizontal machining centre offers a high degree of flexibility and above-average productivity. Description Horizontal BAZ The 6 axes are individually controllable. The HSK 100 holder makes it possible to clamp large tools and thus process large areas with high chip removal. Installed is a high-performance G30 fork head spindle with hydromechanical clamping system and a hybrid slewing bearing at top speed which allows extremely high speeds to be driven in order to achieve an optimal milling result even with the smallest tools. This fork head is equipped with a fully automated spindle change cycle, which makes it possible to replace the complete spindle in less than an hour. A hydraulic clamping device is installed for clamping components (effective table ...

CNC EMCO Turn E45 machine with Siemens console + IEMCA bar feeder Boss 545/21 2011 perfect quality

DMG ecoMill 635V Year of construction: 2015 Control: Haidenhain TNC 620 Travel (X/Y/Z): 635x510x460mm Table size: 790x560mm table load: 600kg Spindle speed: 8,000 rpm Tool changer: 20 seats Drive power spindle: 13/ 9kW Tool holder: SK40 Switching-on hours: approx. 20.300h Spindle hours: approx. 7.500h Accessories Conveyor Machine weight: 3,9to

Matsuura MHA 700 HG Year of construction: 1998 Control: Yasnac Travel (X/Y/Z): 750x600x625mm Table size: 500x500mm workpiece weight: 600kg Table indexing: 1° 2-fold pallet changing table Spindle speed: 8,000 rpm Tool changer: 60x

::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced

Vertical CNC machining center Manufacturer SW Schwäbische Werkzeugmaschinen Type BA35 Year of construction 1998 Control Siemens 840D Travel X/Y/Z 2150/500/500 Work train holder SK40 max spindle speed 10,000 rpm 36 compartment tool changer Conveyor IKZ internal coolant supply

Nakamura Tome Super-Mill WY-250L CNC Multi-Axis Turning/Milling Center Age : 2012 FEATURES: FANUC 31I-A CNC CONTROL DUAL OPPOSED SPINDLES WITH C-AXIS UPPER & LOWER TURRETS WITH Y-AXIS LIVE MILLING ON BOTH TURRETS CHIP BLASTER LNS QL SERVO S3 BAR LOADER CHIP CONVEYOR SPECIFICATIONS: DISTANCE BETWEEN SPINDLES 47.24" MAXIMUM TURNING DIAMETER 8.9" MAXIMUM TURNING LENGTH 35.8" X-AXIS TRAVEL, X1/X2 6.3" / 6.5 Z-AXIS TRAVEL, Z1/Z2 35.8" BAR CAPACITY 1” MAIN SPINDLE: MAIN SPINDLE SPEED 3500RPM MAIN SPINDLE MOTOR 25 HP MAIN SPINDLE BORE 2.6" MAIN SPINDLE NOSE A2-8 C-AXIS ROTATION 0.001 DEGREE SUB-SPINDLE: SUB SPINDLE SPEED 4500RPM SUB SPINDLE BORE 2" SUB SPINDLE MOTOR 20 HP SUB-SPINDLE NOSE A2-6 C-AXIS ROTATION 0.001 DEGREE B-AXIS TRAVEL 37.2" UPPER & LOWER TURRETS: DRIVEN TOOL SPEEDS 6000RPM DRIVEN TOOL MOTOR 7.5 HP Y-AXIS MOVEMENT 4"/2" EQUIPPED WITH: FA ...

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

Table size 1500 x 710 mm Longitudinal travel 1300 mm Cross travel 850 mm Vertical travel 800 mm Spindle speeds 80 - 8.000 rpm Tool change 24 pcs Spindle taper ISA 40 Control FANUC O-M

CNC vertical machining center SIGMA Leader 5 - Control: iTNC 530 - Usable work surface 1400 x 700 mm - Travel distances: X 1250 mm / Y 810 mm / Z 630 mm - feed speed 40,000 mm/min -El. Handwheel - Heidenhain touch probe - Cooling by the spindle 30 bar -Aspirator - Tool measurement Renishaw (not used) - Rotary table Nikken Ø320 - Magazine with 50 seats FOR REPAIR or OVERHAUL - Motor spindle damage electrical - Control supply unit UV 101B approx. EUR 600,00

CNC machining center - X: 650 mm - Y: 510 mm - Z: 510 mm - Clamping surface: 800 x 450 mm - T-slots: size/number/distance 18/4/100 mmm - Table load: max. 400 kg - Working height: 760 mm - Spindle Ø: 65 mm - Speed range: 8000 rpm - Spindle power: 7/9.25 kW - Tool holder: SK 40 - WZ changer: 16-fold - Tool Ø max.: 80 mm - Tool length max.: 250 mm - Tool weight max.: 6 kg - Rapid traverse: 16000 m/min - Control: Siemens 802D - Machine weight: 3500 kg - Dimensions for space (W x D x H): 2.15 x 2.1 x 2.45 m - Condition: good Accessories Documentation, no other accessories