1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 204
item-No.: 126885171
-
270 €
-
Three blade roller, hand carved wood Grate, hand-hewn, 12 mm shank and 120 mm cut length in three diameters, 10mm, 20mm and 30mm the two large cutters appear unused, the small was obviously once used. Including Collet 12 mm. Rasps are used for example in the oscillating roller grinders OZ or OZS of Zimmermann. Please the PDF file with our terms and conditions and order form. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available  ...
Category: 109
item-No.: 126884703
2015
34.500 EU?
Land-pl PL
Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. Condition of the equipment good.
Category: 109
item-No.: 126885165
Wire EDM Sodick AQ535 LN1 year 2001 The machine is still in operation.
Category: 203
item-No.: 126884708
-
12.250 EU?
Land-pl PL
Bandsaw STENNER to cut veneers, fins and other wooden items. It has a mechanism for programming the thickness of the cut pieces.
Category: 202
item-No.: 126885159
1994
1.260 €
-
Technical data copying milling machine: Brand: Rotox Type: KF 457 Year: 1994 Max profile width 125 mm Max profile height 50 mm Milling road 265 x 125 mm Milling speed vertical 12000 RPM. Milling speed horizontal 9000 RPM. Vem2izyi Engine speed 2800 RPM. 2 drive motors a ´ 1.5 kW Overall dimensions 730 x 680 x 1700 mm Weight approx. 180 kg with -1 vertical cutter shaft -2 horizontal milling shaft
Category: 106
item-No.: 126885025
Pressure: 65 tons, cutting performance 1625 mm2 work area - RADIUS 300 mm, kl./Gr.Entfernung v.Aufspanntisch to Stossel 220-440 mm -Stroke: 8-100 mm -Table size: 720 x 600 mm adjustable 220 mm -Plunger area: 450 x 300 mm -Tappet adjustment: 80 mm -Strokes: 120 per min. -. Weight: 3450 kg -Dimensions (L x W x H): 1.5 x 0.8 height 2.3 m -Clamping hole ø 50 x 94 mm -Motor 4 kW speed 1000 rpm -Central lubrication -Camshaft gear Baluff -Safety valve Herion -Adjustable table -Manual, wirin ...
Category: 1009
item-No.: 126880850
2,5 to., edge cutter, grit spreader; Power [PS]: 32; Gross weight [kg]: 2500; Engine: KubotaD1703MEU34
Category: 106
item-No.: 126885023
Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober
Category: 104
item-No.: 126880136
max. dia. of grinding wheel: 175 mm turning speeds: 2825 U/min height adjustment: 150 mm tool taper: TRUMPF feed motion increment: 0,02 mm working area: 400 x 150 mm work height max.: 1100 mm engine output: 2,2 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 800 x 520 x 1300 mm Equipped with Trumpf tool holders as good as new with traces of storage, was used only for testing This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 105
item-No.: 126884981
Erl Working width: 1250 mm Section length approx.: 300-5200 mm Cutting height approx.: 150 mm Saw blade diameter approx.: 600 mm Electr. Supply: 400 V, 16 kVA Weight approx.: 4,5 t Working height: 750 mm Space requirements: 7600 x 2800 x 1300 mm
Category: 107
item-No.: 126880089
sheet width: 3050 mm plate thickness: 6,0 mm ST 45 plate thickness: 4,0 mm ST 70 Pressure power: 230 bar cutting angle: 0,5 - 3,0 ° no. of strokes: 13 / 22 Hub/min down holder: 18 Stück total power requirement: 11,0 kW weight: 5.200 kg range L-W-H: 3,51 x 1,85 x 2,03 mm This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 105
item-No.: 126884977
1995
1.750 €
-
Technical data: -Manufacturer: Eisele Type: VMS 350 -BJ. CA. 1995 Saw blade up to at least 350 mm -with coolant pump MITRE cut possible -Vertikale precision guidance Weight approx. 400kg -2 Geschwndigkeitsstufen -16A power
Category: 107
item-No.: 126880093
sheet width: 2550 mm plate thickness: 4,0 mm in ST cutting capacity: 6,0 mm in ALU back stop - adjustable: 750 mm cutting angle: 2 ° no. of strokes: 42 Hub/min down holder: 15 Stück total power requirement: 7,5 PS This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 705
item-No.: 126884965
Omag C3-6 6-lane 4-side-seal sachet machine for free flowing powder, suitable for fills 1 - 15gm, current sachet size 50mm wide (fixed) x 90mm long (adjustable). Servo-drive cross cutter. Output up to 400 sachets per minute. Year 2009.
Category: 105
item-No.: 126880097
cutting diameter: 225 mm capacity 90 degrees: flat: 245 x 150 mm capacity 90 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 160 x 140 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: square: 140 x 140 mm capacity 60 degrees: flat: 110 x 80 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: round: 90 mm vice: 245 mm turning speed range:: 46/92 m/min saw band length: 2450 x 27 x 0,9 mm total power requirement: 0,7 / 0,81 kW weight of the machine ca.: 265 kg dimensions of the machine c ...
Category: 816
item-No.: 126884781
9 FLEXO UNITS 9 IS UV SYSTEM chill rolls 4 SCREEN UNITS 1 HOT FOIL UNIT 1 THE CUT UNIT WITH K & B GAP MASTER 1 EMBOSSING UNIT Delam / Relam Automatic register control alpha 1 WEB VIDEO SYSTEM BST EUROSCOPE PRO MA 1 COLD FOIL UNIT 1 PRINT BACK UNIT 1 LAMINATING UNIT "SCOTCH" 1 LAMINATING UNIT GLASSINE 1 LAMINATING UNIT UV on request Martin up and Unwinder Machine still has various printing accessories
Category: 107
item-No.: 126880099
sheet width: 3050 mm plate thickness: 6,0 mm down holder: 18 Stück no. of strokes: 9 / 17 Hub/min cutting angle: 0,5 - 3,0 ° oil volume: 100 ltr. range L-W-H: 3,7 x 1,7 x 1,6 mm weight: 4,8 to. This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 703
item-No.: 126884773
-
2.550 €
-
Dicers / Bacon cutter / Cube Dicer RáHLE Type: MR 70 Facilities: Machine made of stainless steel Dimensions machine: 92 x 95 x depth 60 cm width height Performance: approx. 800 kg / h Machine weight: 180 kg 400V / 50 Hz / 16 A 2 pairs of Gates: 10 & 25 mm Machine ready See pictures original condition & accessories! If you have questions, email or call.
Category: 107
item-No.: 126880101
sheet width: 2040 mm plate thickness: 4,0 mm no. of strokes: 58 Hub/min cutting angle: 1,5 ° work height max.: 700 mm back stop - adjustable: 750 mm down holder: 11 Stück weight: 4,2 To. range L-W-H: 2.950x1.900x1.620 mm This ad was created with MODUL MWS - the software solution of LogoTech.
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: