1171 offers

maximum number of results exceeded > 1000
please refine your search

Category: 1601: compressors
New in: used
Price: 1.100 €
Location: Land-de DE ch
Seller: Norbert Gottwald Werkzeugmaschinen

Flow rate 750 l / min. Final pressure 13 bar installed motor power 7,5 kW highest operating speed 3750 RPM. Mass approx. 175 kg Dimensions WxDxH 700 x 700 x 1000 mm Temperature controller eliwell eWPC902T Operating hours counter Oil/water separation system BOGE Oekomat 5

Category: 102: lathes
New in: used
Price: request quote
Location: Austria / TIROL
Seller: ProdEq Trading GmbH

WORKING RANGE TURNING: - swing diameter (max): 470 mm - turning diameter (max): 235 mm - worpiece length max.: 1000 mm BED GAP / BRIDGE: - swing in gap: 690 mm MAIN SPINDLE: - spindle bore diameter: 58 mm - spindle revolutions (min): 20 /min - spindle revolutions (max): 2000 /min - number of gears: 12 - spindle diameter: 58 mm SCREW CUTTING SPINDLE: - advance z-axis (min.): 0.05 mm/r - advance z-axis (max.): 0.82 mm/r - advance x-axis (min.): 0.02 mm/r - advance x-axis (max.): 0.4 mm/r TAILSTOCK: - taper: MK 4: ELECTRICAL SPECIFICATIONS: - total power consumption: 5.5 kW DIMENSIONS / WEIGHTS: - space requirements -left/right-: 1900 mm - space requirements -fron ...

Category: 102: lathes
New in: 2001
Price: request quote
Location: Land-it IT 23801 Calolziocorte, via serta 23
Seller: Industrialbay

2001 Control Fanuc ISO + T conversational turning diameter max 220 mm rotating diameter 400 mm max turning length 380 mm 12 positions Turret spindle speed 5000 power 3.7 main spindle max turning diameter 45 mm bar spindle nose ASA 5 " Spindle speed 5000 rpm power KW 11/15 counter diameter inner mandrel tube 42 mm max turning diameter from bar 27 mm spindle nose ASA 4 " Spindle speed 5000 rpm power 5.5 KW machine weight 4300 kg

Category: 201: saws
New in: 1996
Price: used machinery auction RESALE 3.200 €
Location: Land-it IT Italy, 36066 Sandrigo
Seller: Surplex GmbH

Weight approx.: 500 kg Dimensions (l x w x h) approx.: 8000 x 1000 x 1400 mm Description: - loading with inclined motorized roller conveyors, length about 4 meters <,/ p>, - inclined machine body with: <,/ p>, - diameter 350 mm, cutting command with double button operated by operator <,/ p>, - on / off selection of reference beats, with counter of each cutting repetition <,/ p>, - drain with inclined motorized carpet, length about 4 meters, with 6 pneumatic stops <,/ p>,

Category: 102: lathes
New in: 2001
Price: request quote
Location: Land-it IT 23801 Calolziocorte, via serta 23
Seller: Industrialbay

Year 2001 FANUC 18i-T counter displacement only on axis z without bar loader belt pulleys bearings were changed in March 2018 the car has always worked with neat oil

Category: 101: boring mills and machining centers
New in: 2000
Price: used machinery auction RESALE 850 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 200 kg Dimensions (l x w x h) approx.: 850 x 850 x 1800 mm Description: Speed range 225 - 4300 rpm Tool holder MK 2 spindle head diameter 35 mm outreach 250 mm column diameter 90 mm spindle stroke 100 mm table clamping surface 250 x 250 mm with vice jaw width 100 mm clockwise and counter-clockwise rotatioin per footswitch mounted on table

Category: 1200: machines and plants for process engineering
New in: 2005
Price: request quote
Location: Land-fi FI 00980 Helsinki, Hämeentie 15 S, 3rd Floor
Seller: JADE Trading OY

CO2 Recovery Plant Union Engineering RBU 500 kg/h The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was delivered by Union Engineering in 2005 and it has nominal CO2 removal capacity of 500 kg/h. CO2 compressor is two stage Mehrer piston compressor and refrigeration compressor is Sobroe operating with ammonia (R717). The plant has Siemens S7-300 PLC control system where operation is carried our via a 12” screen panel with Windows CE operating system. The delivery includes following main components: • Foam trap, material AISI 304 • Water scrubber for CO 2 gas flushing mainly from alcohol, capacity 1200 kg/ ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear

Category: 1200: machines and plants for process engineering
New in: 1999
Price: request quote
Location: Land-fi FI 00980 Helsinki, Hämeentie 15 S, 3rd Floor
Seller: JADE Trading OY

CO2 Recovery Plant Union Engineering 500 kg/h The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was delivered by Union Engineering in 1999 and it has nominal CO2 removal capacity of 500 kg/h. CO2 compressor is two stage Mehrer piston compressor and refrigeration compressor is Sobroe operating with ammonia (R717). The plant operation is controlled with Siemens S7-300 PLC. The delivery includes following main components: • Foam trap, material AISI 304 • Water scrubber for CO 2 gas flushing mainly from alcohol, capacity 1200 kg/h CO2, material AISI 304 (Common with another 500 kg CO2 recovery system) • Infl ...

Category: 703: meat and fish processing machines
New in: used
Price: used machinery auction RESALE 4.250 €
Location: Land-be BE Beukenhofstraat 77A, 8570 Anzegem
Seller: Industrial Auctions BV

Perfecta deep frying counter with cooking plate, dimensions plate: 600 mm x 500 mm, total dimensions: 2400 mm x 1000 mm x 1500 mm.

Category: 1300: other machines and plants
New in: 1967
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Inclination balance with tare weighing and piece counter. Weighing range: 100-2500Kg, accuracy: 2Kg.

Category: 102: lathes
New in: 2015
Price: request quote
Location: ab Werksstandort,unter Strom
Seller: Kemmerich Werkzeugmaschinen GmbH

turning diameter: 430 mm turning length: 800 mm control: CELOS / Siemens 840D SL Rapid traverse feeds turret 1 (milling head) x/y/z: 40 / 40 / 50 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 7,5/9 kW Spindle 1 RPM: 6000 1/min Spindle 1 Power: 18,5 kW C-axis spindle 1: 0,001 ° internal coolant system feed: Bar capacity spindle 1: 52 mm Spindle 2 RPM: 6000 1/min Sub spindle: 18,5 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 51 mm swing diameter max. over bed cover: 730 mm x-axis: 455 mm y-axis: +/- 105 mm z-axis: 800 mm b-axis: +/- 120 ° total power requirement: kVA weight of the machine ca.: t dimensions of the machine ca.: 4,7 x 2,69 x 2,87 m ? CNC Con ...

Category: 1108: spare parts
New in: used
Price: request quote
Location: Land-tr TR 34953 ISTANBUL, TACIR SOK. NO:19-20 AYDINLI TUZLA
Seller: DEPA MARINE

SULZER 6AL20/24 CRANKSHAFT NEW. TOGETHER WITH COUNTERWEIGHTS & GEARS. READY FOR THE SHIPMENT.

Category: 102: lathes
New in: used
Price: used machinery auction RESALE 850 €
Location: Land-es ES Spain, 45860 Villacañas
Seller: Surplex GmbH

Weight approx.: 4100 kg Dimensions (l x w x h) approx.: 3650 x 1220 x 2850 mm Description: Diesel forklift, fork hoist, fork truck, lift truck Capacity 2500 kg Maximum lift height 4400 mm Fork lenght 1100 mm Maximum Fork width 950 mm With lateral movement Solid tyres Operating hours according to the counter approx. 6769 45 kw power engine TOYOTA For the loading a truck with loading ramp is required or a mobile crane what causes additional fees

Category: 1108: spare parts
New in: used
Price: request quote
Location: Land-tr TR 34953 ISTANBUL, TACIR SOK. NO:19-20 AYDINLI TUZLA
Seller: DEPA MARINE

SULZER 8AL20/24 CRANKSHAFT NEW. TOGETHER WITH COUNTERWEIGHTS & GEARS. READY FOR THE SHIPMENT.

Category: 1900: general inventory
New in: 1998
Price: used machinery auction RESALE 240 €
Location: Land-es ES Spain, 45860 Villacañas
Seller: Surplex GmbH

Weight approx.: 230 kg Dimensions (l x w x h) approx.: 1000 x 700 x 920 mm Description: Screw compressor, serial number SHO15257 Motor power 11 kW Working pressure 10 Bar Noise level 70 dB Total operating hours according to the counter 12517

Category: 702: breadmaking and confectionery machines
New in: used
Price: 2.690 €
Location: Land-de DE 97786 Motten, Hammerweg 13
Seller: Statt Nahrungsmittelmaschinen

Diosna Hubkneter Laborkneter Table design two speeds 400V Mixing arm and bowl made of stainless steel Removable Bowl Machine is equipped with counter ideal to try out new formulas to extrapolate them on large Kneader to be able Capacity approx. 2, 5 kg of flour Machine is running properly and quietly As by the customer, is to clean thoroughly prior to use Video about test run and more pictures available

Category: 1900: general inventory
New in: 1999
Price: used machinery auction RESALE 240 €
Location: Land-es ES Spain, 45860 Villacañas
Seller: Surplex GmbH

Weight approx.: 450 kg Dimensions (l x w x h) approx.: 1700 x 800 x 1120 mm Description: Rotary vane compressor, serial number 990619 Motor power 22 kW Working pressure 10 Bar Total operating hours according to the counter 37906

Category: 1108: spare parts
New in: used
Price: request quote
Location: Land-tr TR 34953 ISTANBUL, TACIR SOK. NO:19-20 AYDINLI TUZLA
Seller: DEPA MARINE

WARTSILA 8L26 CRANKSHAFT FOR SALE STANDARD SIZE & WITH MEASUREMENT REPORT. TOGETHER WITH COUNTERWEIGHTS & GEARS.

Category: 102: lathes
New in: 2014
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

number of spindles: 6 spindle passage: mm turning length: mm --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 6 WORKING RANGE TURNING: - swing diameter (max): 14 mm - turning diameter (max): 14 mm ATTACHMENTS (TURNING): - chip conveyor: yes: - coolant unit: yes: - band filtration unit: yes: - coolant through turret: yes: - through spindle coolant attachment: yes: - aspiration unit: yes: - hydraulic system: yes: - European CE standards: yes: MultiSwiss technical data 6x14 Bar passage mm 4-14 Max. Workpiece length mm 40 Max. Remaining piece length mm 70 Max. Main spindle rpm 8.000 Power main spindle kW ...

Category: 2500: miscellaneous
New in: used
Price: request quote
Location: Land-at AT Saturn Tower, Leonard-Bernstein-Straße 10, 1220 Wien
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

consisting of: Desk about 2,000 x 1,000 mm, make Vitra, countertop light grey, foot-chromed, metal shop roller containers Vitra with 3 PCs. shop, Office Chair, Vitra, foot chromed, seat and back fabric black, armrests plastic black, side table D approx. 750 mm, base chromed, countertop white, 2 free cantilever chairs for Vitra, frame chrome-plated metal, seat fabric black, armrests and backrest plastic black, dress stand chrome-plated, base, black with 6 PCs. suspensions

Category: 102: lathes
New in: 2013
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

number of spindles: 6 spindle passage: mm turning length: mm --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 6 WORKING RANGE TURNING: - turning diameter (max): 14 mm ATTACHMENTS (TURNING): - chip conveyor: yes: - coolant unit: yes: - band filtration unit: yes: - coolant through turret: yes: - through spindle coolant attachment: yes: - aspiration unit: yes: - hydraulic system: yes: - European CE standards: yes: MultiSwiss technical data 6x14 Bar passage mm 4-14 Max. Workpiece length mm 40 Max. Remaining piece length mm 70 Max. Main spindle rpm 8.000 Power main spindle kW 5.60 Torque Main spindle Nm 8 M ...

Category: 107: sheet metal working
New in: 2005
Price: 75.000 €
Location: Land-de DE 06132 Halle, Eisenbahnstrasse 3
Seller: S&B IT Service und Beratung

Data on the machine: Type of machine: ASTRO 100 NT Manufacturer: Amada / Astro Year: 04/2005 Software: ASTRO CAM systems PC Year: 04/2005 Hours of operation machine counter 34,000 Software counters 28,000 hours of operation Ptr39i Condition: used / good condition Site Location: Germany / Halle (Saale) Price: VHB Description Make: Amada Type: Press brake HDS-1030 NT Pressing force: kN 1,000 Drive: servo-hydraulic Deflection compensation: active hydraulic cylinder Bending length: mm 3000 Passage between the machine stands: 2700 mm Throat depth: 415mm Stroke: 200mm Height: 500 mm Backgauge adjustment range: 600 mm Work table width: 60 mm Number of controlled axes:  ...

Category: 109: other metal working machines
New in: 2008
Price: request quote
Location: Land-de DE Germany, 71679 Asperg
Seller: Surplex GmbH

Weight approx.: 450 kg Dimensions (l x w x h) approx.: 1500 x 800 x 2100 mm Description: KELCH KALIMAT C 36 Measuring& Testing Machine Serial no.. 1697 - incl. base cabinet, PC (EASY-WebSet), chalice USB-Counter, screen, keyboard, mouse - Documentation accessories: 6 pieces of different tool holders - Technical data: see pdf document

Category: 207: gluespreader machines
New in: 2002
Price: 27.900 €
Location: Land-de DE 40764 Langenfeld, Herzogstr. 10a
Seller: Tischlerei Bracht GbR

Edge banding machine IMA Klessmann, advantage 4612 with add and two scraping. Thank you, that you are interested in our offers. If you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail. As link machine Edge thickness approx. 0.4 12 mm Workpiece height approx. 10-50 mm, using the corner copying 16-40 mm Feed about 12m / min Noise guard pull-out workpiece support Dust extraction connector 2 x 120 mm, 2 x 100 mm IPC control Imatronic 121zur ease of use of the machine Up to 200 user programs can be stored Aggregates: Top pressure manual adjustment Infeed fence (manual adjustment with SIKO counter) Fuegefraesen  ...

Category: 836: post press: other
New in: 2001
Price: request quote
Location: Land-uk UK Manchester
Seller: PostIndustry

CN 80 Newspaper Counter stacker with 450 mm bucket height. This has B&R control upgrade.(2016)

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Land-de DE
Seller: Moser Werkzeugmaschinen

Siemens 840 D range on clamping surface (threaded holes according to DIN 55201) 400 400 mm NC rotary table Pallet changer with rotary Chuck Platt Ständerlängsverstellung (x) 650 mm Support vertical adjustment (y) 650 mm Table cross adjustment (z) 650 mm Interference circle diameter ø 700 mm Motor spindle speed 15000 rpm Main drive power 31 kw Torque 200 nm Tool holder HSK DIN 69893-HSK-A63 Chain-type tool magazine 60 seats prepare subsequent cultivation of portable electronic hand wheel Chip conveyors, scraper discharge height 1050 mm Closed working space Panel according to UVV Number of counters on NC screen Remote diagnosis Pallet sequence operation Op ...

Category: 836: post press: other
New in: 2001
Price: request quote
Location: Land-uk UK Manchester
Seller: PostIndustry

CN 80 NewspaperCounter stacker with 450 mm bucket height. This has B&R control upgrade.(2016)

Category: 102: lathes
New in: 1999
Price: 22.780 €
Location: Land-de DE 58091 Hagen, Delsterner Str. 53a
Seller: TechnoMac - Maschinen, Roboter, Automatisierung

Offered here is a lathe of manufacturer A.V.M Angelini. The machine is in good condition and may halls like in our be viewed and tested. Technical data: Manufacturer: A.V.M. Angelini Type: Snupy 21TI Year of construction: 1999 Workspace: Round bed: 320 mm Circulation over carriage: 165 mm Tip height: 190 mm Distance between points: 600 mm Plan travel: 275 mm Longitudinal travel: 400 mm Main spindle: Spindle bore: 60 mm Bar bore: 42 mm Power: 15 kW Speed: 50-4500 RPM Counter spindle: Speed: 50-4500 RPM Feed drive: Rapid traverse x/Z: 16/20 m / min Turret with 12 stations Chuck: VDI 30 Machine dimensions: 3500 x 2000 x 2000 mm (without chip conveyor) Wei ...

Category: 836: post press: other
New in: 2001
Price: request quote
Location: Land-uk UK Manchester
Seller: PostIndustry

CN 80 Newspaper Counter stacker with 450 mm bucket height. This has B&R control upgrade.(2016)

Category: 832: post press: folders
New in: used
Price: request quote
Location: Land-de DE
Seller: LA-POSTPRESS Landauer Alexander

3 MONTHS LA POSTPRESS WARRANTY Excluding electronics Comprising: Horizon AFC-566 FKT 6 - Pocket folding machine + 1 sword + 2 bags Counter: 38 million -Technology: Touch & work -Folding roller setting: fully automatic -Memory types of folds: 17 pre-programmed standard folding types -Order memory: 200 memory locations for repeat orders -Sword: fully automatic -Format: Max 558x850mm; min. 128x148mm -Folding length: 1 bag: min. 58 mm all other bags: min. 35 mm -Paper weight: 40-250 g / m² -Load capacity: 740 mm -Performance: maximum 50,000 cycles/h -Electricity: 400V/50 Hz - 2, 7kW -Dimensions: 3.100 x 1.090 x 1. 680mm (without display)  ...

Category: 836: post press: other
New in: 2001
Price: request quote
Location: Land-uk UK Manchester
Seller: PostIndustry

CN 80 NewspaperCounter stacker with 450 mm bucket height. This has B&R control upgrade.(2016)

Category: 309: mills
New in: 2000
Price: 5.300 €
Location: Land-cz CZ 38601 Strakonice, Jinin 78
Seller: Dematech s.r.o

Granulator for plastic, plastic-coated Lancelin with three rows of three bolted knives. With 10 mm perforated strainer holes �. Filling up by hopper with hinged cover 650 x 460 mm; Number of rotors 1 3 piece knife + 2 piece counter Blade Knife long 450 mm Motor power 30 kW 1470 rpm, 220/380 V inlet above 650 x 460 mm Inlet 150 x 460 mm rotor diameter 400 mm rotor length 450 mm Screen holes ø 10 mm water cooling Length/width/height 1400/1630/2500 mm Approx. weight kg 2000

Category: 836: post press: other
New in: 2001
Price: request quote
Location: Land-uk UK Manchester
Seller: PostIndustry

CN 80 Newspaper counter stacker with 450 mm bucket height. This has original Grapha control.

Category: 818: presses: other
New in: 2000
Price: request quote
Location: Land-cz CZ 38601 Strakonice, Jinin 78
Seller: Dematech s.r.o

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Category: 836: post press: other
New in: 2001
Price: request quote
Location: Land-uk UK Manchester
Seller: PostIndustry

CN 80 NewspaperCounter stacker with 450 mm bucket height. This has B&R control upgrade.(2016)

Category: 209: other wood working machines
New in: 2007
Price: request quote
Location: Land-pl PL 66415 KÅ‚odawa , Gorzowska 8
Seller: PPHU Lignum Przemysław Kretowicz

Edgebander HOMAG KDF 540 GC Manufacturer HOMAG Model / type of KDF 540 GC machine Year of production 2007 Machine category. One-sided edgebander Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Basic information: "Thickness of the edge - 0.4-8 mm "Cutting off the roll max. 3 x 45 mm "Thickness of elements - 8-50 mm "Feed - about 11 m / min "Working pressure - 6 bar "Installed power approx. 12.5 kW "Machine length - 5.360 mm pre-milling aggregate 2x2,2 kW two concurrent and counter-rotating engines (two heads 100x48x30 mm) Aggregat okujaj?cy Aggregate cutting off the edge  ...

Category: 402: packing machines
New in: 1990
Price: 10.750 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Sloter Martin for the production of large size flaps (e.g. for europallets). Working width 2900 mm, per circumference 1800 mm. The machine is working. Serrated knives. The equipment requires a general inspection, cleaning, lubricating and replacing the counters prior to commissioning, (counters are worn out). The machine is solid, very heavy and stable. Slat feeder. In the pictures lack of the table (tray) which is an integral part of the machine.

Category: 805: presses: sheetfed 5-color
New in: 2005
Price: request quote
Location: Land-de DE 42857 Remscheid, Vieringhausen 96
Seller: Wira Grafik GmbH

KBA Rapida 74-5 Age: 2005 Counter: 109 million Format: Max 52x74cm / min. 21 x 29, 7 cm Performance: 18,000 sheets/hour Equipment: 5 color Straight machine CIP-3 (PrintFlow dips) Ergotronic Colortronic Logotronic basic Varidamp Halfautomatic Platechanger Washing devices Ink temperature control Non-stop delivery Powder

Category: 106: presses
New in: 1988
Price: request quote
Location: Spain
Seller: ProdEq Trading GmbH

pressure: 250 t plate thickness: mm no of strokes: 80 Hub/min --------------------------------------------------: PRESS DESIGN: - drive system: hydraulic: SLIDE: - total force (nominal): 250 to - stroke rate (max.): 80 /min - cutting velocity min.: 10 mm/s - cutting velocity max.: 31 mm/s - closing velocity: 120 mm/s - returning velocity: 200 mm/s V-RING: - nominal force: 150 to COUNTER RAM: - nominal force: 55 to TOOL DIMENSIONS: - lower table - width: 695 mm - lower table - depth: 730 mm - upper table - width: 550 mm - upper table - depth: 550 mm ELECTRICAL SPECIFICATIONS: - total power consumption: 45 kW - mains voltage: 400 V - mains frequency: 50 Hz ...

Category: 802: presses: sheetfed 2-color
New in: 1991
Price: request quote
Location: Land-de DE 42857 Remscheid, Vieringhausen 96
Seller: Wira Grafik GmbH

Heidelberg GTO 52 Z Age: 1991 Serial: 702414 Size: 36 x 52 cm Counter: 67 million impression Equipment: 2 color Varn Kompac 3 Inline perforation and grooving In very good condition

Category: 102: lathes
New in: 2003
Price: request quote
Location: Land-de DE Germany, 45473 Mülheim an der Ruhr
Seller: Surplex GmbH

Weight approx.: 5100 kg Dimensions (l x w x h) approx.: 3100 x 2100 x 2000 mm Description: Number of spindles: 2 -number of axes: 8 -number of towers: 2 MAIN SPINDLE -spindle head: A2-5 -spindle power: 22 [kW] -spindle speed: 6000 [r/min] -Max. bar diameter: 52 [mm] -Max. turning diameter: 190 [mm] -C axis indexing precision: 0.001 [°] COUNTER SPINDLE -spindle head: A2-5 -spindle power: 22 [kW] -spindle speed: 6000 [r/min] -max. bar diameter: 52 [mm] -C axis indexing precision: 0.001 [°] -spring travel: 525 [mm] UPPER LEFT TOWER -number of positioins: 16 -number of motor-driven positions: 16 -tool holder type: VDI 30 -driven tool speed: 6,000 [r/min] -X / Z-stroke: 140/450 [mm] -Y stroke:  ...

Category: 501: granulation plants
New in: 2000
Price: 470.000 €
Location: Land-ro RO 41022 Oradea, Calea Aradului, no. 23/39
Seller: Kuhn & Partner Romania SRL

Description Brand REGUTEC Model REGUPLANT BLUELINE 9000 ID 2000 Status Active Price 470.000 € + VAT Year of manufacture 2000 Fuel Altele Power 135 KW Location Budapesta, Ungaria Rubber recycling line REGUTEC REGUPLANT BLUELINE 9000. Components and line stages: 1. Primary crushing SBH 1600/950 Double-Shaft Crusher 2. Secondary crushing Regumatic M2000 R2 Single-Shaft Crusher 3. Granulation 4. Classification equipment 5. Air suction 6. Utilities Double shaft shredder ca 4 tons tyres/hr Dimensions of the cutting area: 1600 × 950 mm Knife width: 70 mm Revolutions of the cylinders: 0-20 rev/min; continuously adjustable Drive: 2× hydraulic motor Compact Haggl ...

Category: 103: milling machines
New in: 1992
Price: request quote
Location: Land-de DE Germany, 45473 Mülheim an der Ruhr
Seller: Surplex GmbH

Weight approx.: 1700 kg Dimensions (l x w x h) approx.: 1420 x 1300 x 1650 mm Description: Universal tool milling machine Deckel FP3A speeds: 31.5 - 3150 r/min clockwise - counter-clockwise speed programmable tool holder SK40 feed speed: 5 ? 1250 mm/min working range: X : 400 mm Y : 315 mm Z : 400 mm

Category: 832: post press: folders
New in: 2010
Price: request quote
Location: Land-de DE 71263 Weil der Stadt, Bachstr. 6
Seller: Altmann Graphische Maschinen GmbH

width 50 cm age 2010 flat pile feeder with suction head counter MCS 106 1. station: 6 folding pockets noise absorbing hood following knife shaft stream delivery Delivery time: immediately from stock Ref: GU180347A Please ask for price! We ship and install worldwide!

Category: 102: lathes
New in: 2001
Price: request quote
Location: Land-de DE Germany, 45473 Mülheim an der Ruhr
Seller: Surplex GmbH

Weight approx.: 3992 kg Dimensions (l x w x h) approx.: 3353 x 1220 x 1829 mm Description: Main spindle bar capacity: 1,42 spindle speed: 6.300 r/min drive power at 100/25% duty cycle: 9.1/14.6 HP torque: 15/23 Ft. lbs. C-axis resolurion: 0.001 ° resolution electronic positioning: 0.1 ° counter spindle bar capacity: 1.42 Dia-travel Z4:9.84 Dia-travels X3:14.57 spindle speed: 6,300 r/min drive power at 100/25% duty cycle: 9.1/14.6 HP torque: 15/23 Ft.Lbs C-axis resolution: 0.001 ° resolution electronic positioning: 0.1 ° tool stations: 12 (24) rapid traverse Z1:1181 YPM rapid traverse X1/Y1:590 IPM chip-time: 0.55 sec. front adhesion tool stations (w/counter spindle): 5 tool stations (w/o ...

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-at AT 4407 Steyr-Gleink, Lehnerweg 6
Seller: AUER

2 piece F. 17.3 2 piece F. 17.34 Milling machines with double head (duplex), with counter holder for horizontal milling

Category: 210: window production machines
New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Number of spindles: 3 St. Number of tools: 7 St. Spindle diameter: 50 mm Spindle length: 120/320/160 mm Control: ja # 2485 Weinig Univar 6 .. .. Technical data summary (possibly additionally included accessories please inquire) .. .. General .. .. > Dimensions: 3500x1700x2200 mm > Loading dimensions: 3500x1700x2200 mm > Machine weight, approx .: 3000 kg 1 profiling spindle .. .. > Equal and counter-rotation for tear-free refolding yes > Position: right > Number of tools: 1 pcs. > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 120 mm > Tool diameter max .: 232 mm > Engine power: 7.5 kW 2. profiling spindle .. ... > Position ...

Category: 816: presses: flexo and rotogravure
New in: 1991
Price: request quote
Location: Land-de DE 42855 Remscheid, Hastener Straße 98
Seller: GRAPHIC- Systems

Arsoma EM 410: â?¢ Built in 1991 â?¢ 4 Wasserflexowerke â?¢ 1 UV-Flexowerk â?¢ 3 punching units â?¢ 1 laminating unit â?¢ Corona â?¢ 2-way rewinder Magnetic cylinder: 2 x Z 96, 2 x Z 100, 2 x Z 102, 2 x Z 104, 1 x Z 110, 2 x Z 112, 2 x Z 116, 1 x Z 120, 2 x Z 128, 2 x Z 132, 2 x Z 135, 2 x Z 136, 2 x Z 138, 1 x Z 144, 2 x Z 148, 1 x Z 150, 2 x Z 160, 1 x Z 164 Cylinders: 5 x Z 66, 2 x Z 68, 5 x Z 69, 5 x Z 72, 2 x Z 74, 5 x Z 80, 5 x Z 82, 2 x Z 83, 4 x Z 88, 5 x Z 92, 5 x Z 96, 2 x Z 99, 5 x Z 100, 5 x Z 102, 5 x Z 104, 2 x Z 112, 4 x Z 116, 5 x Z 120, 1 x Z 122, 5 x Z 128, 1 x Z 135 2 x Z 138, 1 x Z  ...

Category: 502: presses
New in: 2018
Price: request quote
Location: Land-sl SL Slowenien
Seller: OBM Recycling Machinery B.V.

Manufacturer ANIS Trend d.o.o. Type ATS110-75D 60 tons Year of construction 2018 Hours of operation 52 hours Press power main press 59 tons Specific press capacity 71 N/cm² Bale density with material cardboard approx.450 kg/m³ Bale density with material PET- and HDPE bottles approx. 280 up to 320 kg/m³ Feed hopper 1,600 x 1,040 mm Capacity per cycle 2,13 m³ Theoretic cycle time 10,7 sec. Cycle time under operating conditions approx. 20 sec. Theoretic throughput rate 441 m³/hour Throughput rate under operating conditions approx. 235 m³/hour Bale size 1,100 x 770 x 1,200 up to 2,200 mm (w x h x l) Driving motor 45 kW Oil cooler 1,5 kW Oil heater 2,0 kW Main Electric power 400 V / 50 Hz  ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)