british flag
Resale Logo

Cooling used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information processing technique  ENDERS Produktion GmbH  http://www.crushers.de 
banner logo
start page > keywords Cooling > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
124970742 804  

HEIDELBERG MOVP for sale


Heidelberg MOVP, 1989 Ref.Nr: 2496 manufacturer Heidelberg model MOVP year built: 1989 Max sheet size: 480 x 650 mm availability: immediately condition: good price: on technical request spezification: â?¢ 4 c ...
used machine
 
Heidelberg MOVP, 1989
Ref.Nr: 2496 manufacturer Heidelberg model MOVP year built: 1989 Max sheet size: 480 x 650 mm availability: immediately condition: good price: on technical request spezification: â?¢ 4 colors
â?¢ perfecting 2/2
â?¢ 87 million printing figures
â?¢ convertible to Super-clever
â?¢ including standard accessories
â?¢ Three-phase 380 volts 50 hertz
â?¢ ALCOLOR film dampeners, incl. upgrade, cooling and cupboard dosing
â?¢ Control and control technology of CPC 1-02 with light pen and tape set lateral loosening blower
â?¢ electronic drag mark control
â?¢ split plate clamping rails
â?¢ Plate cylinder chromed
â?¢ Powder device GRAFIX
â?¢ Drive and protection device for numbering and imprinting device
â?¢ extended cable set to the control cabinet
â?¢ electrolysis facility
1989
Price  
    request
124965189 101

?SW EMAG S03-12 for sale
Machining Centre


Weight approx.: 8000 kgDimensions (l x w x h) approx.: 3000x3900x3100 mmDescription:  ,SW EMAG Machining Centre Control Siemens 840 D Travels: X 300 mm Y 400 mm Z 400 mm Rotary table (4. axis) Lockers HSK 63 Max. sp ...
used machine
 
Weight approx.: 8000 kg
Dimensions (l x w x h) approx.: 3000x3900x3100 mm
Description:  ,SW EMAG Machining Centre

Control Siemens 840 D
Travels:
X 300 mm
Y 400 mm
Z 400 mm
Rotary table (4. axis)
Lockers HSK 63
Max. spindle speed 17500 U / min
Spindle engine power 15,5 kW
2 pallets
Swivel tabele
4. axis
High pressure: 40 BAR
Cooling tank
Chip conveyor
2007
used machinery auction RESALE 7,000 €  
  DE   request
124970703 1300

KOYO THERMO SYSTEMS CO. L Mesh Belt type continuous furn for sale
Mesh Belt type continuous furnace


The continuous furnace by Koyo has 7 Heizonen, related to the temperature, all individually set. (via the control panel) That is, curves temperature can be used with the oven. For example: In every 20 ° C 180 ° c to  ...
used machine
 
The continuous furnace by Koyo has 7 Heizonen, related to the temperature, all individually set. (via the control panel)
That is, curves temperature can be used with the oven.
For example: In every 20 ° C 180 ° c to 40 ° C and vice versa.

After the heat, the item goes through the transition zone from the zone to the cooling zone, where the element at room temperature down is cooled.

Through the chain belt, it is possible to heat the element from above and below. A thermocouple is installed in each heating zone.

The chains treadmill traverses a ultrasound pool, as well as a drying station during the process so that it is cleaned continuously.
Bb8bg9i03o
(See detail drawing)

The stove is sold including the Absaugestutzen. For more information, you can contact me.
2011
300,000 €  
    request
124964865 106

HIDRALMAC PH4C Platinum for sale
Hydraulic 4-column press 500 T


Here are the technical data of the machine offered: If the data does not fit exactly, please request by clicking an individual offer according to your wishes : ? Contact us for a custom quote? HIDRALMAC manufactur ...
used machine
 
Here are the technical data of the machine offered:
If the data does not fit exactly, please request by clicking an individual offer according to your wishes :

? Contact us for a custom quote?

HIDRALMAC manufactures presses exactly to your liking at surprisingly reasonable prices !

To have no problems with the procurement of spare parts , almost exclusively components MAde in Germany be incorporated into the HIDRALMAC presses.



General information:

Hydraulic 4-column press 500 T with nitrogen compression for 280 Bar
ATTENTION Extra picture
Columns and cylinder are made of tool steel SAE 1045 (identical to German standard C 45) and the outside induction hardened and chromed.
The linear guides of the plunger are made using bronze sliding sleeves.
Manuals and operating instructions for the motors, pumps and the actual press as well as the CE declaration (all in duplicate)
The machine complies with the EU Machinery Directive 2006/42 / EG.EN Hydraulic Presses
(4 Column Press Four Column Press, 4-column press, press columns, 4 column press, Column Press hydraulic four-column press, hydraulic 4-column press, hydraulic column press, hydraulic 4-column press, hydraulic column press
Hydraulic press, hydraulic press, hydraulic press,)

Specifications + Dimensions:

Capacity: 500 tonnes at 250 Bar
Retraction force of the plunger: 40 tons
Master cylinder: 2 pieces Ø 360 mm with induction hardening and chrome trim
Auxiliary cylinder: 2 pieces Ø 120 mm with induction hardening and chrome trim
Motors: Total 62 KW
Voltage / frequency: 400 V / 50 Hz
Voltage of 24 V .: Steuerungk
An axial piston pump: 290 liters / min. (Rexroth / Bosch A4VSO125)
Stroke length: 1000 mm
Installation height: 1500 mm (distance worktop - ram plate with the cylinder retracted)
Workspace: 2100 x 1500 mm
Table and ram plate: 2100 x 1500 mm with T-slots according to customer requirements
Total size tabletops: ca. mm 2750 x 1600
Total size follower plates: ca. mm 2750 x 1600
Working height: 850 mm (floor to top of table)
Speed: forward 300 mm / sec, return 300 mm / sec.. (at 20 T ram weight)
Speed printing phase: 200 to 28 mm / sec, 300 to 20 mm / sec, 500 to 6 mm / sec..
Overall Dimensions (D x W x H): 2900 x 2800 x 4040 mm
Total weight: about 39 to
Hardware Hydraulics:
Hydraulic block: REXROTH
Hydraulic Tank: 2000 Lt. volume
Oil consumption: 1000 Lt.
Ram protection: mechanically and hydraulically
Pressure Control: via PLC (minimum pressure 50 tons)
Water Cooling: for oil cooling - externally mounted (without cables)
Heating oil in the tank: to keep the minimum temperature of the oil at low outside temperature
Lubrication of guides: automatic, number of strokes and lubrication time on PLC adjustable
Additional hydraulics: 2 inputs and outputs for tool
Mechanical safety devices:
Side and rear double-wing doors protection - secured with magnetic limit switches
Protection terrace surrounding the hydraulic section with ladder
Ejector (with simultaneous flow and return of the 4-cylinder):
Capacity: 4 x 15 tons at 250 bar
Cylinder: 4 x Ø 90 x 70 mm - front + rear mounted on Presssenkoerper
Stroke length: 300 mm (adjustable via PLC)
Speed:. Advance 95 mm / sec, return 240 mm / sec.
Additional Bars: 2100 x 100 x 150 mm with T - slots - front and rear
Accessories Control:
Control system: SIEMENS S7 300 (suitable for subsequent full automation)
Memory capacity: 200 programs,
Pressure setting: via Monitor 50-500 to
Speed: adjustable via monitor 0-300 mm / sec. in automatic mode
Monitor: SIEMENS 12 \"touch panel
Electronic components: SIEMENS / MOELLER
Controller: on arm
Control: automatic 2-hand operation with key switch, manually via control panel in setup mode
Operation: two-hand operation to move
USB interface: for data transmission
Remote Control: Siemens for remote maintenance
Light Sensors: SICK 1500 mm at the front of the work area
Spacer sensors: the stroke length
Maintaining constant pressure: 0-900 sec.
Lighting: the entire press room by LED
Piece counter
Operation of the controller:
The linear measuring rod divided the control in each case with the position of the plunger and the ejector. The travel, the upper breakpoint and the changeover point at which the press of deadhead should switch to operating speed, as well as to driving end position can be easily and quickly entered via the monitor control.
The working speed can be set in 1 mm / sec increments from 0 to 10 and in 10 mm increments from 10 to 300 mm.
In addition, the machine features a pressure monitor which either when it reaches the desired pressure the plunger moves back up or the pressure within the preset time keeps constant (with 5% tolerance) and then opens.
The controller monitors the secured areas, the overall hydraulic, the pumps and the temperature.
In addition, it controls the synchronization between the master cylinder and regulates in unilateral burden after.
The controller is housed in a separate cabinet.
The actual press is operated via a fixed to a swing arm control panel. This reduces the paths.
Additional accessories:
Polycarbonate glass 8 mm indoors the back door
Polycarbonate glass 8 mm on the lateral doors of the work area and the work area
Liquid channel with 25 mm / radius on the front and back and side of the table
Special features of the press:
Including 10% reserve (capacity max. 550 tons)
Steel quality: stainless steel ASTM A36 LCG, manufactured according to DIN 8651
Motor and pump switch off when the tool is closed and control at 5% loss after (huge cost savings)
Nitrogen compression system:
Comes complete with a nitrogen compression system that produces an explosive pressure of 280 bar and switched on and can be switched off.


You are looking for a tailor-made machine?
? Contact us for a custom quote.
HIDRALMAC
Presses, press brakes and guillotine shears with the right degree
; ready for operation
2014
Price  
    request
124970701 702

AUTOBAKE Biscuit for sale
Serpentine Oven


Autobake Serpentine Oven for baking plats - Mass of the plats: 762 x 457 x 2 mm - Infeed in the Oven = 2 plats - Baking area: 70 qm - The Oven is for Muffin, Cup Cake, Biscuits or Cookies - Required floor space: L ...
used machine
 
Autobake Serpentine Oven for baking plats

- Mass of the plats: 762 x 457 x 2 mm
- Infeed in the Oven = 2 plats
- Baking area: 70 qm
- The Oven is for Muffin, Cup Cake, Biscuits or Cookies
- Required floor space: LxWxH = 20 x 4,5 x 6 Meter
- YOC: 1999
- The Line is consisting of Serpentine Oven and Cooling Tower
- Panel is in stainlees steel
- Control panel is about central control cabinet
with Elan Bradley Tochscreen
- The Oven is packed, ready to charge.
- Pictures and mass by request
- All Documetation available.

1999
Price  
    request
124964863 1200

HIDRALMAC for sale
Salt and mineral stone press 150 T


Technical data + dimensions: ? Capacity 150 T at 290 bar ? Engine OFF 10 KW ? Column diameter 230 mm, chrome-plated ? Pump REXROTH / PARKER ? stroke length 500 mm ? installation height 1000 mm (distance table - p ...
new machine
 
Technical data + dimensions:

? Capacity 150 T at 290 bar
? Engine OFF 10 KW
? Column diameter 230 mm, chrome-plated
? Pump REXROTH / PARKER
? stroke length 500 mm
? installation height 1000 mm (distance table - plunger plate with retracted cylinder)
? Working height approx. 1000 mm
? Speed feed 9,9 mm / sec., Return 25 mm / sec.
? Speed Pressure phase 100 to = 9.9 to 0 mm / sec
? Overall dimensions (T x W x H) approx: 1200 x 1800 x 3100 mm
? total weight about 8.5 T

Accessories hydraulics:

? Hydraulic block REXROTH / PARKER
? Hydraulic valves REXROTH / PARKER
? Hydraulic tank 500 Lt. volume
? Oil requirement approx. 400 Lt.
? ram protection mechanically and hydraulically
? Pressure control via rotary valve
? Air cooling for oil cooling - with electric fan
? Lubrication for guides Lubricating nipples

Mechanical guards:

as the machine sinks less than 10mm, no protection is required in the EU.

Accessories control:

? Control cabinet mounted on the right side of the press
? Control Two-hand operation in single stroke or fully automatic
                                                                manually via control panel in setup mode
Special features of the press:

- Steel quality: engineering steel LCG ASTM A36, manufactured according to DIN 8651
- All components in contact with the salt are made of stainless steel

The scope of supply includes the filling station and the conveyor belt with a length of 1500 mm.

On request, we can also supply a robot that removes the salt stones and stacks them in a grid box.

Process of production:

o The salt is automatically filled into the mold in exactly the right amount.
o Then the filling mechanism returns and the pressing cylinder presses the salt block together
o subsequently, the undercounter goes down and releases the salt block,
o at the same time, the impression cylinder moves upwards
o Now the filling mechanism moves forward and refills the mold while at the same time pushing the salt block onto the belt.
o The belt transports the salt part to a storage area.
o Now the process repeats itself.

In one hour, the machine makes up to 40 salt stones.

The shape of the salt stones depends on the tool. Our offer includes a tool for a block of 200x200x150 mm.
This stone has rounded Ecen and in the middle a continuous hole for attachment with a cord.

Hydraulic press, mineral block, mineral block press, mineral lick, mineral press, press, salt and mineral licks, salt licks, salt block, salt block press, salt block press, salt lick, salt press, cattle salt
new
Price  
    request
124946040 702

HAGESANA for sale
Whipped cream machines


It is a used Hagesana cream blowers (50 litres) for sale. This is fully functional and in good condition. The cream machine is equipped with an integrated cooling.
used machine
 
It is a used Hagesana cream blowers (50 litres) for sale. This is fully functional and in good condition.
The cream machine is equipped with an integrated cooling.

 
850 €  
    request
124964657 103

UNION BF 650U for sale
CNC bed type milling machine


For sale is due to new acquisition: 1 x UNION BF 650 U bed type milling machine with HEIDENHAIN TNC 155 P control needed good fully functioning State - immediately from stock available for casting. Facilities: Ch ...
used machine
 
For sale is due to new acquisition:

1 x UNION BF 650 U bed type milling machine with HEIDENHAIN TNC 155 P control needed good fully functioning State - immediately from stock available for casting.

Facilities:
Chip conveyor
Chip protection door
Cooling unit for milling specifications:
Year of construction: 1986
Control: HEIDENHAIN TNC 155P

Procedures
X axis: 2000 mm
Y-axis: 1000 mm
Z-axis: 1200 mm

Table Lxw: 2000 x 1000
maximum table load: 4000 kg feed range - continuous: 2-2000 mm / min
Rapid traverse: 7000 mm / min

Spindle:
Recording: Iso50
Power: 24 kW
Spindle speed - adjustable: 50-2500 RPM
Max torque: 1800 NM

incl. chip conveyor

Space requirements of in accordance with attached PDF
Machine weight: 15.5000 kg changes / errors in the technical data as well as intermediate sales reserved!
1986
Price  
    request
124946017 302

CINCINNATI CM-55 for sale
Double screw-type extruding machine


Conical twin screw Manufacturer: CINCINNATI Type: CM 55 Year of construction: 1986 Serial No.: 16878/10 Diameter of screw: 55-110 mm, conical Screw length: 1195 mm Screw geometry: for Rigid PVC profiles Screw tor ...
used machine
 
Conical twin screw
Manufacturer: CINCINNATI
Type: CM 55
Year of construction: 1986
Serial No.: 16878/10
Diameter of screw: 55-110 mm, conical
Screw length: 1195 mm
Screw geometry: for Rigid PVC profiles
Screw torque: 6.439 NM
Screw speed: 1-34.7 1/min.
Drive motor: DC motor, thyristor-controlled
Motor power: 23,4 kW
Cylinder heating/cooling zones: 3/2 (cooling zone 2 + 3 oil flow with heat exchanger)
Mould heating zones: 6 incl. flange
Temperature controller: 9 digital temperature controller
Degassing zone: 1 x vacuum pump
Output: approx. 120-140 kg/h for rigid PVC, depending on the material and product
Total connected load: approx. 100 kW
Dimensions: 3700 x 1100 x 2300 mm (incl. funnel)
Weight: 3100 kg
Condition: used and checked for function
Note: The processing unit was newly built about 1 year ago (condition like new).
1986
19,500 €  
    request
124964622 101

HURCO VM30 DSi for sale
3-Axis machining centre


Control System WinMax Movement X,Y,Z [mm] 1.270, 508, 508 Spindle speed 10.000 Spindle: Speed 10.000 rpm Power 15 kW Torque 102 Nm Taper SK40 In general: Clamping surface 1.321 x 508 mm Tableloading (max.) ...
used machine
 
Control System WinMax
Movement X,Y,Z [mm] 1.270, 508, 508
Spindle speed 10.000

Spindle:
Speed 10.000 rpm
Power 15 kW
Torque 102 Nm
Taper SK40

In general:
Clamping surface 1.321 x 508 mm
Tableloading (max.) approx. 900 kg
Toolmagazin 20-fold
Rapid traverse in X/Y/Z-Axis 24 m/min

Equipment / Accessories
Workpiecemeasurement: Touchprobe, Renishaw OMP 60
Toolmeasurement: Renishaw TS27R
Coolingmanagement: Cooling unit
Chipmanagement: Chipsnail
Interface: Network, DXF-Software
Setup: Electronic handwheel
Additional accessorie: Signal lamp, rinsing pistol
2014
Price  
    request
124946014 302

WEBER DS12.22 for sale
Double screw-type extruding machine


We sell from stock D-41334 Nettetal 1 piece twin screw extruder Weber DS12. 22 construction year: 1990,Serial-No.: DS120 079 thoroughly overhauled, with a computerized control system with touch screen monitor(PM ...
used machine
 
We sell from stock D-41334 Nettetal

1 piece
twin screw extruder Weber DS12. 22
construction year: 1990,Serial-No.: DS120 079

thoroughly overhauled, with a computerized control system
with touch screen monitor(PMA vario EC103), newly built in the year 2015

incl. a second used processing unit (pair of screws and barrel) in good condition

Description:
1 piece
Twin screw extruder, used and reconditioned
Manufacturer: WEBER
Type: DS-12.22
Year of construction: 1990
Serial no.: DS 120 079
Hours of operation: 92.137 hours
Screw diameter: 2 x 125 mm (parallel)
Effective screw length: 22 x D
Screw Torque: 40,000 nm
Screw speed: approx. 1-30 1/min.
Drive motor: DC motor
Drive power: 120 kW
Control: Computer-controlled control system with touch screen display
(PMA vario EC103), newly built in the year 2015
Barrel heating/cooling zones: 10/5
Die heating zones: 8
Heating zones: All heating elements are switched by Solid States Relays
Degassing zone: 1 x vacuum pump (5.5 kW)
Output capacity: about 700-800 kg/h for hard-PVC pipes, depending on the material
Connected load: 180 kW (without die)
Accessories: melt pressure and melt temperature sensors (new)
Dimensions: approx. 7000 x 2000 x 2100 mm (without hopper)
Weight: approx 9500 kg
Note: a material hopper is not included

1 piece
Pair of screws, used in very good condition (currently installed)
Serial number: 025.244264.B8.472
Screw diameter: 124,6-125,0 mm

1 piece
Barrel, used in very good condition (currently installed)

1 piece
Pair,of screws, used in good condition (as spare part)
Serial number: 025.173701.B15.214 s
Screw diameter: 123,3-124.5 mm

1 piece
Barrel, used in good condition (as spare part)

1 piece
Die flange, used in good condition

1990
Price  
    request
124964626 102

GILDEMEISTER Twin 102 for sale
CNC turn-mill centre


Control System Siemens 840 D Turning length [mm] 900 Spindle bores [mm] 100 / 65 Mainspindle: Speed 3.200 rpm Power 41 kW Torque 600 Nm Bar capacity 100 mm Collet chuck Hainbuch SPANTOP Gr. 100 Subspindle:  ...
used machine
 
Control System Siemens 840 D
Turning length [mm] 900
Spindle bores [mm] 100 / 65

Mainspindle:
Speed 3.200 rpm
Power 41 kW
Torque 600 Nm
Bar capacity 100 mm
Collet chuck Hainbuch SPANTOP Gr. 100

Subspindle:
Speed 5.000 rpm
Power 26 kW
Torque 290 Nm
Bar capacity 65 mm
Collet chuck Hainbuch SPANTOP Gr. 65
Movement X-Axis 175 mm
Movement Z-Axis 670 mm

Tool carrier I (X/Y/Z):
Technology Turret with 12 stations
Taper VDI30
Tool drive 4.000 rpm, 11,7 kW, 28 Nm
Movement X-Axis 290 mm
Movement Y-Axis +/- 40 mm
Movement Z-Axis 650 mm
Rapid traverse in X/Y/Z-Axis 30/15/30 m/min

Tool carrier II (X/Z):
Technology Turret with 12 stations
Taper VDI30
Tool drive 4.000 rpm, 11,7 kW, 28 Nm
Movement X-Axis 180 mm
Movement Z-Axis 650 mm
Rapid traverse in X/Z-Axis 30/30 m/min

Equipment / Accessories
Chip disposal: Chip conveyor
Coolingmanagement: Internal cooling unit with filter
Toolbreakage control: Mechanical
Raw materialfeed: Short bar loader, IRCO-Breuning ILS-RBK
Finished part removal: Part catcher with conveyor belt
Taper: Misc. driven and static tool holder
3-jaw chuck: 1x ø250 mm, 1x ø200 mm incl. misc. jaws
Extraction: Preparation
Additional accessories: Spindle liner tubes, bushings, rinsing pistol
2006
Price  
    request
124945988 805

KOMORI SPICA 529 for sale


46 million print Max sheet size of 530 x 750 mm Komorimatic dampening Heberloses Technotrans moist medium cooling device incl. PDC-SII Lite Powder device Grafix Pallet feeders Suction belt system table Rubber bla ...
used machine
 
46 million print
Max sheet size of 530 x 750 mm
Komorimatic dampening Heberloses
Technotrans moist medium cooling device
incl. PDC-SII Lite
Powder device Grafix
Pallet feeders
Suction belt system table
Rubber blanket washing device with cloth
2009
Price  
    request
124964628 101

HÜLLER HILLE NBH 95 for sale
4-Axis Horizontal machining centre


Control System Siemens 840 D Movement X/Y/Z [mm] 630/630/630 Spindle speed 10.000 Spindle: Speed: 10.000 rpm Taper: HSK-A63 NC-round table: B-Axis: 0,001° Rapid traverse: 40 1/min Pallet size: 500 x 400 mm T ...
used machine
 
Control System Siemens 840 D
Movement X/Y/Z [mm] 630/630/630
Spindle speed 10.000

Spindle:
Speed: 10.000 rpm
Taper: HSK-A63
NC-round table:
B-Axis: 0,001°
Rapid traverse: 40 1/min
Pallet size: 500 x 400 mm
Table loading (max.): 600 kg

In general:
Tool magazine: 88-fold
Pallet storage: 5-fold
Rapid traverse in X/Y/Z-Axis: 50 m/min

Equipment / Accessories
Position sensor: Direct scales in X/Y/Z
Cooling management: Internal cooling unit with filter, 70 bar
Toolmonitoring: Tool breakage control
Chip disposal: Chip conveyor
Additional accessorie: 9x pallets, 2 additonal 44-fold magazin cassettes
Documentation: Paper
2001
Price  
    request
124945916 801

HEIDELBERG SM 52-1 for sale


Autoplate, Alcolor dampening, Cooling unit, Automatic wash-up device, Powder sprayer, + Version
used machine
 
Autoplate, Alcolor dampening, Cooling unit, Automatic wash-up device,
Powder sprayer, + Version
2002
Price  
  DE   request
124964634 101

DMG DMC 60 H - RS4 for sale
4-Axis horizontal machining centre


Spindle: Speed 15.000 rpm Taper HSK-A63 NC-round table: B-Axis 0,001° Palletsize 500 x 400 mm Drilling pattern threaded holes M12 x 22 Workpieceweight (max.) 600 kg In general: Tool magazine 180 stations P ...
used machine
 
Spindle:
Speed 15.000 rpm
Taper HSK-A63

NC-round table:
B-Axis 0,001°
Palletsize 500 x 400 mm
Drilling pattern threaded holes M12 x 22
Workpieceweight (max.) 600 kg

In general:
Tool magazine 180 stations
Pallet storage 4 stations

Equipment / Accessories
Position sensor: Direct scales in X/Y/Z
Cooling management: Internal cooling unit with paperbeltfilter, 40 bar
Chipdisposal: Scraper-type-chip-conveyor
Tool monitoring: Breakage control, Laser
Raw material feed: 4-fold pallet storage
Extraction: Preparation mechanical extraction
Additional accessorie: 6 pieces pallets
ATTENTION: New spindle in 2009
1999
Price  
    request
124945913 102

EMAG VL5 for sale
Vertical Turret Lathe


Hardinge Emag VL 5 year 2002 FANUC 21 12-seater tower VDI 40 no motorized without measuring device after regeneration of the turret, cooling unit, pump under current in the company until 09.04.2018
used machine
 
Hardinge Emag VL 5
year 2002
FANUC 21
12-seater tower
VDI 40
no motorized
without measuring device
after regeneration of the turret, cooling unit, pump

under current in the company until 09.04.2018
2002
Price  
    request
124962720 0

DMTG DL 25-MH x 1500 mm for sale
CNC Turning- and Milling Center


turning diameter:520 mmturning length:1500 mmcontrol:Siemens 802DSL turning diameter over bed:520 mmturning diameter over bed slide:310 max. dia over bed:500 mmchuck size:250 mmspindle taper ISO:A 2-8 spindle speed::35-3 ...
used machine
 
turning diameter:520 mm
turning length:1500 mm
control:Siemens 802DSL
turning diameter over bed:520 mm
turning diameter over bed slide:310
max. dia over bed:500 mm
chuck size:250 mm
spindle taper ISO:A 2-8
spindle speed::35-3500 U/min
dia. spindle bore:87 mm
max. bar dia:74 mm
x-travel:260 mm
z travel:1600 mm
tailstock quill diameter:100 mm
tailstock quill stroke:139 mm
taper of tailstock quill:5 MK
guideway:box type (flach)
tool size:2525 mm
rapid travel - longitudinal/face:12 m/min
power requirement:18.5(22) kW
weight of the machine ca.:7800 kg
dimensions of the machine ca.:4834x1830x1977 mm
Paint colour: Ash grey/dark grey (RAL 7012) gloss:
Hydraulic hollow 3 jaw chuck and chucking cylinder:250 mm
hydraulic tailstock:
chip conveyor:
halogen lamp:
Foot pedal control of tailstock and chuck:
auto lubrication system:
cooling system:
spindle speed monitor:
45° slant bed:
stepless speed:
12-tool hydr. tool turret:angetriebene Werkzeuge
technical documentation:
c-axis:
CE-design:

2007
Price  
    request
124930135 101

MORI SEIKI NH4000DCG for sale
Horizontal Numerically Controlled Machining Centres


Single spindle CNC machine Control system: FANUC FS-31 and MSX-701/711 B-axis 360,000 x 0,001 ° Spindle speed 14,000 rpm. Toolkit: Number of toolbars 60 Tool holder: HSK63 Internal cooling Axis X: 560 mm Y axis: ...
used machine
 
Single spindle CNC machine
Control system: FANUC FS-31 and MSX-701/711
B-axis 360,000 x 0,001 °
Spindle speed 14,000 rpm.
Toolkit: Number of toolbars 60
Tool holder: HSK63
Internal cooling
Axis X: 560 mm
Y axis: 560 mm
Axis Z: 630 mm
able work surface size: 400x400 mm
table load capacity: 400 mm
maximum workpiece rotation diameter: 630 mm
maximum workpiece height: 900 mm
The machine is involved in the production
2007
Price  
  SK   request
124962508 0

KRAFT VL 1300 | VL 1500 for sale
Machining Center - Vertical


:VL 1300 | VL 1500 x-travel:1.300|1.500 mmy-travel:760 mmz-travel:700 mmtable-size:1.600x750 mmmax. table load:1.200 kgdistance spindle center to column:780 mmdistance spindle center to table:135-835 mmrapid traverse in  ...
new machine
 
:VL 1300 | VL 1500
x-travel:1.300|1.500 mm
y-travel:760 mm
z-travel:700 mm
table-size:1.600x750 mm
max. table load:1.200 kg
distance spindle center to column:780 mm
distance spindle center to table:135-835 mm
rapid traverse in x-y-z axis:24/24/24 m
milling feed range:1-10.000 mm/min
:10.000 (6000 bei SK 50) 1/min
spindle drive:15/18.5 kW
positioning accuracy:+/- 0,012 mm
repeating accuracy:+/- 0,010 mm
tool taper:SK/BT 40, SK/BT50
max. tool weight:8/15 kg
tool length:350 mm
Tool diameter:Ø110/Ø200 (angrenzend leer) mm
dimensions:4.015 x 3.605 x 3.550 mm
weight of the machine ca.:12 t
cnc control Siemens 828d:
complete cooling system:
24 station arm type tool magazine and 24 sets pull:
Machine work light:
rigid tapping:
chip conveyor with chip bucket:
water gun:
:
heat exchanger:
automatic lubrication system:
CE-design:
technical documentation in German language:
signal lamp:
pneumatic unit:
Spindle oil cooler:
Cutting air blast:
Automatically power off:
MPG hand wheel:
linear scales:
CNC controls from:Siemens/Fanuc/Heidenhain
tool measuring system:Blum
workpiece measurement system:Blum
CNC-rotary table:
4th5th axis:

Brand-new CNC vertical machining center with CNC control Siemens 828D with Shopmill. Incl. the following standard accessories: CNC control Siemens 828D with SHOPMILL including 2-year warranty 1 piece coolant system 1 piece automatic 20-fold tool changer (Model VL-700), Type ?ARM TYPE ATC? 1 piece automatic 24-fold tool changer (Model VL-900, VL-1100, VB-1000, VB-1200, VB-1600), Type ?ARM TYPE ATC? 1 piece Halogen Machine Lamp 1 piece alarm / indicator lamp rigid tapping 1 set of tools 1 piece chip conveyor (chain) 1 piece tool set (water gun, air gun) 1 set foundation blocks and fixture screws heat exchanger for electric cabinet automatic lubrication system full enclosure guard automatic power off Spindle speed of 8000 U / min (Model VL-700, VL-900, VL-1100, VB-1000) Spindle speed of 6000 U / min (Model VB-1200, VB-1600) linear guide (VL-Serie) from THK or Rexroth 1 set of operating manual with spare parts list in German language 400V, 50cps, 3 phs CE version incl. CE Declaration of Conformity belt drive with 10.000 U/min door interlock 8,4? Screen spindle chiller coolant through spindle center tool setter (Blum) Warranty: 12 months More information can be found in the Appendix.
new
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(18)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country