1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: 2015
Price: 5.750 €
Location: Land-de DE 04838 Eilenburg, Weinbergstr. 9
Seller: MMD-Food-Technik GmbH

Combi Steamer RATIONAL SCC GR 101 SCC = SelfCookingCenter GR = WhiteEfficiency Intelligence meets efficiency: the SelfCookingCenter of much more than a professional ovens which knows how to deal with heat and steam is RATIONAL: thanks to the innovative four assistants, meals are prepared faster and more accurately. Cook will be one experience and the cleaning of the device a breeze. The rational SelfCookingCenter 101 (SCC 101) is high end in your kitchen. Technical data Dimensions: Hxwxd = 174 x 85 x 85 cm Frequency: 50-60 Hz Voltage: 3NAC 400 V Power: 18.6 kW Year of build: 03-2015 Execution: Electric units Body made of stainless steel Water connect ... more

New in: used
Price: used machinery auction RESALE 1.500 €
Location: Land-ro RO Romania, 407062 Suceagu
Seller: Surplex GmbH

Weight approx.: 8000 kg Dimensions (l x w x h) approx.: 3600 x 3400 x 2400 mm Description: Belt width 1150 mm, 2 sanding units, combination sanding unit (soft grooved roller) ,contact shoe unit, (2 small hard rollers), structure brush, vacuum carpet, additional suction motor, spare sanding belts MIRCA more

New in: 2006
Price: 2.995 €
Location: Land-de DE 97076 Würzburg, Gattingerstr. 11C
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

90 ° curve conveyor right + 1000 mm folding units as a combination Built in 206 Belt curve: 90 ° right Make TRANS standard 1500 type TS Width 500 mm Overall width 660 mm Height belt OK 950 mm (height) including 2 supports Fold-out piece Make TRANS standard belt conveyor 1200 type TS Width 500 mm Total width 600 mm Length 1000 mm including 1 support to the recording by 2 gas springs with PCs Height belt OK 950 mm (height) constant conveyor speed 0.45 m/sec Optional: double-sided lateral support of for curve + fold-out piece for the price of â?¬ 140 more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

cap. 900 - 1200 pcs./h, 3000 pcs. a 150 g\r\n1000 pcs. a 1000 g, doughweightrange 50 - 2000 g \r\nmoulding-lenght up to 750 mm (estimation)\r\n more

New in: 1992
Price: request quote
Location: Land-de DE 63768 Hösbach - Rottenberg, Buchenweg 25
Seller: WEIBERT maschinen

KFS-37 fields Circular saw milling machine Sliding table 2400mm Boom Built in 1992 2 motors with 400V 50 Hz 4kW Angle stop short Swivel milling machine 45° Saw swiveling 45° Feed Haffner Speed feed rate: 4-8-11-22 m / min more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

chamfered up at the rear,\r\nwith supporting frame with panels on 3 sides.\r\nbelow basin d 535/400 / w 500/400, h 200mm\r\nupper basin d 335/280 / w 500/400, h 280mm\r\ndistance basin from the floor\r\nbelow 525 / upper 1060 mm\r\n more

New in: used
Price: 1.929 €
Location: Land-de DE 97076 Würzburg, Gattingerstr. 11 C
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

920 mm straight piece + 30° roles curve left as a combination Rolling curve: 30° serial link Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm Straight piece: Length: 920 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Drive: round belt curve + straight piece double-sided edge guide included 2 double support included Height role OK 800 +/-100 mm more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

computer-controlled, 24 diff. programs, 2 speeds, laminating, dividing and moulding combined in one machine,\r\ndougweight range 65 - 800 gr., cap. 750 - 6300 p./h\r\nproducing of soft- and hard dough, f.e. ciabatta, baguette\r\naccessories: 2 four cylinder-moulders\r\nincl. extender to mould extra-long more

New in: 1999
Price: request quote
Location: Land-it IT
Seller: Alcon SRL

Fully automatic machine to cut and print step indexes The REGA 7 processes products in formats A8 – A6. The machine distinguishes by high flexibility, short change-over time and simple menu guidance. Technical information Products: pocket diaries, agendas, address books, promotional brochures etc. Formats: 130 x 185 mm max – min. 50 x 50 mm Book thickness: 15 mm max (depending on product) Cut form: angular cut Types: European/Arabic index combined indexes Double and multiple indexes Printing: one or two colours letters and words printed/non-printed indexes Binding category: all standard binding sorts Cover: bendable (no hardcover) Operator: 50% manpo ... more

New in: used
Price: used machinery auction RESALE 80 €
Location: Land-it IT Italy, 37136 Verona (VR)
Seller: Surplex GmbH

Weight approx.: 200 kg Dimensions (l x w x h) approx.: 1500 x 1300 x 1500 mm Description: See photo more

New in: 2010
Price: 3.800 €
Location: Land-de DE 04838 Eilenburg, Weinbergstr. 9
Seller: MMD-Food-Technik GmbH

Combi steamer ELOMA Multimax A 6-11 (below) ELOMA Multimax B 6-11 (above) Technical data Overall dimensions: Hxwxd = 205 x 94 x 110 cm Temperatrurbreich: 30 ° C - 300 ° C Frequency: 50 Hz / 400 V Connected load: A: 11 kW / B: 11,3 kW Year of constr.: A: 2010 Year of construction: B: 2007 Execution: Electric units Steaming, Combi-steaming, hot & low temperature cooking Core temperature probe (both units) per unit: 6 x GN 1/1 trays Body made of stainless steel Water connection Shower (unit B, above) Right-hinged door inclusive stainless steel base See State & accessories, original images! If you have questions, email or call. ... more

New in: 2002
Price: used machinery auction RESALE 7.000 €
Location: Land-it IT Italy, 12030 Marene (CN)
Seller: Surplex GmbH

Weight approx.: 2800 kg Dimensions (l x w x h) approx.: 3250 x 1800 x 1900 mm Description: AUTOMATIC CALIBRATING &, SANDING MACHINE Worktable and carpet are bored for vacuum hold-down system WORKING UNITS Unit with ROLLER - extractable planing roller Unit with ROLLER to calibrate - grooved steel roller Unit with ROLLER to calibrate sand - rubber coated roller COMBINED unit made by a ROLLER and a PAD - rubber coated roller Panels cleaning unit with BRUSH Security norme CE mark. more

New in: 1999
Price: request quote
Location: Land-it IT 00198 Rome, Via Alessandria 208
Seller: Alcon SRL

Fully automatic machine for cutting and printing of indices in notches. REGA 7 work products of the format A6-A8. Products: Pocket Calendar, agenda, general guide, brochure etc. Formats: mas. 185 x 130 mm min. 50 x 50 mm Thick book: mas. 15 mm (depends on the products) Forms of cutting: cutting at angola Types: European indices/indexes combined double and multiple indexes, Arabic Printing: one and two color letters and words printed or unprinted indexes Type of binding: working all kinds of the most usual Ligature Covers: folding (hardcover) operator: 50% of use of operator (depends on product) Yield: Max. 1 ' 400 pieces per hour Time: 15-60 minutes of Sta ... more

New in: 2008
Price: 125.000 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 371; Front tyre size: 900/60-32; Rear tyre size: 500/70R24; Accessories: Betriebsstunden:1901, Motorhersteller:Caterpillar, Bordcomputer / Monitor, Durchsatzkontrolle, Häcksler, Haspelhorizontalverstellung, Hydrostatische(s) Antrieb/Getriebe, Kabine, Klimaanlage - manuell, Pendelausgleich, Reversiereinrichtung, automatische Sc more

New in: 1995
Price: request quote
Location: Land-it IT 00198 Rome, Via Alessandria 208
Seller: Alcon SRL

Fully automatic machine for cutting and printing tabbed indexes. REGA 4 work products than A4 – A6 Products: calendars, address book, notebooks, school books, catalogues, pricelists, brochures, documentation, loose sheets etc. Formats: mas. 320 x 250 mm-min. 130 x 90 mm (optional ca. 100 x 75 mm) Thick book: mas. 25 mm (depends on product) Cut shape: miter cut and shaped, rounding corners, corner perforation Types: Arabic/European indices combined indices Double and multiple indexes Printing: one and two colours letters and words printed or non-printed indexes Type of binding: working all kinds of the most usual Ligature Covers: rigid/folding Operator: 50% ... more

New in: 2001
Price: 29.000 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 250; Front tyre size: 900/55-32; Rear tyre size: 600/55-26.5; Accessories: Motorhersteller:Sisu, Schüttleranzahl (6 Stck.), Bordcomputer / Monitor, Durchsatzkontrolle, Häcksler, Hangausgleich, Haspelhorizontalverstellung, Hydrostatische(s) Antrieb/Getriebe, Kabine, Klimaanlage - manuell, Pendelausgleich, Reversiereinrichtung, au; Working width [cm]: 550 more

New in: 1982
Price: request quote
Location: Land-de DE 64625 Bensheim
Seller: EnTeHa GmbH & Co KG

No. 3845: 1 gebr. Universal milling machine Fabr. RECKMANN, type combined 1300 b. 1982 with TNC 135 arb.-ber.: 1200 x 450 x 450 mm Power: 2 x 11 kW Accessories: Table 1570 x 560 mm Bearing for horizontal milling Documentation Other: SK 50 spindle Separate spindle motors for vertical / horizontal speed range 22 - 1200 min-1 Feeds 10-1000 mm / min Rapid traverse 5 (2) m/min Space requirement approx. 4 x 4 x 2.7 m Shipping dimensions approx. 3 ch x 2.70 m height Weight approx. 4.5 to more

New in: 2001
Price: used machinery auction RESALE 8.000 €
Location: Land-de DE Germany, 54486 Mülheim an der Mosel
Seller: Surplex GmbH

Weight approx.: 15000 kg Dimensions (l x w x h) approx.: 10000 x 5000 x 3500 mm Description: machine no.: 285.042.01 - voltage: 400 V - frequency: 50 Hz - power: 5,6 kVA - with plasma-aggregate HYPERTHERM HD 3070 - with plasma-marking device HYPERTHERM ARCWRITER - serial no.: 084-000680 - with CNC-control system MESSER OMNICOM - table size approx. 8000 x 3000 mm - with large stock of accessories and spare parts more

New in: 2000
Price: request quote
Location: Land-it IT 00198 Rome, Via Alessandria 208
Seller: Alcon SRL

Year 2000 – print format 72 × 102 cm – complete with: – CP 2000 with daytime lamp – PRESET Feeder – Steel plate in mettifolgio with ramp – Steel plate and ramp in the sheet feeder and delivery – Deposit of sheets in the feeder – Electronic double sheet Detection – Lateral control – Suction Brush in the sheet feeder – ALCOLOR – Combination device TECHNOTRANS CombiStar fluid recycling and the temperament of the units, air cooled – AUTOPLATE – HD system register Plate – Washing Devices controlled by the program for ink unit cover and cylinder pressure cylinder – Blowing device, printing blanket/cylinder, all units -GR ... more

New in: 2007
Price: used machinery auction RESALE 60.000 €
Location: Land-de DE Germany, 54516 Wittlich
Seller: Surplex GmbH

Weight approx.: 16000 kg Dimensions (l x w x h) approx.: 20000 x 8500 x 3200 mm Description: serial no.: 30397 - voltage: 400 V - frequency: 50 Hz - max. diameter: 100 mm - max. sheet thickness: 25 mm - max. resistance: 410 N/mm² - max. weight 5000 kg - max. sheet width approx. 2500 mm - with 2 chip conveyors and 1 part conveyor - with FICEP-part display for the automatic gripping of sheets - with plasma source HYPERTHERM HPR 260 - serial no.: 078186 - YOM: 2007 - with control cabinet FICEP B 251 - YOM: 2007 - with several tool holders - incl. dust extractor DONALDSON DFPRO S-CYCLO - serial no.: 57093411 - power requirement: 11 kW - YOM: 2007 - with FICEP-control system as well as video more

New in: 2008
Price: request quote
Location: Land-ru RU Moscow
Seller: Press Expert

Heidelberg SM 52-4 Anicolor Four-colourful sheet-fed press. Ideal solution for short and middle runs. Press preparation for printing: 30-35 sheet. Runs change: 7-10 min. Information: Age: 2008 Condition: very good Condition of cylinders: Damage free Location: Russia Complete and in working condition. Available: immediately Counter: 67 mio Current State: In production Test is possible. Technical data: Max. sheet size: 370 x 520 mm Min. sheet size: 105 x 145 mm Max. print format: 360 x 520 mm Thickness: 0.03 - 0.40 mm Max. speed: 15000 sph Feeder: 840 mm Delivery: 460 mm Specification: Prinect Press Center with touchscreen monitor AutoPlate Anicolo ... more

New in: 2008
Price: used machinery auction RESALE 65.000 €
Location: Land-de DE Germany, 54516 Wittlich
Seller: Surplex GmbH

Weight approx.: 17000 kg Dimensions (l x w x h) approx.: 30000 x 13000 x 3000 mm Description: serial no.: 31426 - voltage: 400 V - frequency: 50 Hz - max. diameter: 40 mm - max. thickness: 100 mm - max. resistance: 520 N/mm² - with ISO-45-holder - with 3 x 6-fold told changer - with 1 vertical and 2 horizontal drilling heads - with chip conveyor LA PROTEC, YOM 2007 - machine no.: 1571 - with horizontal band saw FICEP - max. part width approx. 1200 mm - incl. connected path with cross conveyor - with FICEP-CNC-control system more

New in: 2009
Price: 156.000 €
Location: Land-ro RO Bucharest
Seller: Kuhn & Partner Romania SRL

Description Brand IMA Model Combina K II ID SH3972 Status Price reduced Price 156.000 € + VAT Year of manufacture 2009 Location Bucure?ti / Bucharest (RO) Double sided edgebanding Machine IMA COMBINA K II manufactured in 2009. One refurbished in 2009 and the other manufactured in 2009. Only sold together. ExWorks. Price is negotiable. Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila. more

New in: 1994
Price: 49.700 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 190; Front tyre size: 650/32; Rear tyre size: 16.5-24; Rear tyres remaining: 70; Front tyres remaining: 80; Accessories: Betriebsstunden:1900, Motorhersteller:John Deere, Schüttleranzahl (5 Stck.), Bordcomputer / Monitor, Häcksler, Hangausgleich, Hydrostatische(s) Antrieb/Getriebe, Kabine, Klimaanlage - manuell, Pendelausgleich, Schüttler, Spreuverteiler, Schneidwerk, Verlu; Working width [cm]: 480 more

New in: used
Price: 1.500 €
Location: Land-de DE 91785 Pleinfeld / Ramsberg, Untere Dorfstr. 2
Seller: Lebensmitteltechnik Mayer

Oven, convection oven, Neff, with rack trolleys for 20 1/1GN sheets 2 separate heaters and controls, timer 2 x 400V 16 A for heating, 1 x 230 V for control, for direct connection. Dimensions Lxwxh approx. 90x93x180cm, weight about 250kg. Unit in good condition according to the age. more

New in: 1971
Price: used machinery auction RESALE 2.500 €
Location: Land-de DE Germany, 58455 Witten
Seller: Surplex GmbH

Weight approx.: 1300 kg Dimensions (l x w x h) approx.: 2200 x 1100 x 1600 mm Description: Combined belt and wheel caterpillar Caterpillar: Belt thickness 10 mm Belt width 80 mm Press length 350 mm Closing pressure max. 10 kp/cm² Haul-off speed max. 200 m/min Capstan Capstan wheel Ø 350 mm Capst.wheel width 60 mm Closing force max. 10 kg/cm² Haul-off speed max. 700 m/min complete with control cabinet machine was used in laboratory, therefore very good condition more

New in: 2008
Price: 4.900 €
Location: Land-de DE
Seller: MF Service BHKW GmbH

Used gas CHP Mephisto G34 Enclosure with 4 cylinder Perkins engine 34 kW electric more

New in: 1999
Price: used machinery auction RESALE 37.500 €
Location: Land-de DE Germany, 85716 Unterschleißheim
Seller: Surplex GmbH

Weight approx.: 16000 kg Dimensions (l x w x h) approx.: 8100 x 7500 x 2400 mm Description: - Serial number.: 080413 - Laser power: 3kW - Max. cutting power: 22 t - Connected load: 73 kVA - Compressed air connection: 7 bar - Max. passage height for punching operation: 35 mm - Max. passage height for laser operation: 22 mm - Working range combined operation: 2585 x 1280 mm - Working range punching operation: 3085 x 1370 mm - Working range laser operation: 3085 x 1280 mm - Max. air consumption: 65 Nm³/h - Max. sheet thickness punching operation: 8 mm - Max. weight: 200 kg - Max. part size during outfeeding via slide: 500 x 500 mm - Max. punching diameter: 76 mm - Max. stroke sequence: 600 1/m ... more

New in: 2009
Price: 17.500 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Edgebander Brandt Optimat KDF 210 with add and two scraping. Edge thickness role approx. 0,4-3 mm Workpiece height approx. 8-50 mm Feed about 10m / min Noise guard pull-out workpiece support Suction connection 1 x 125 mm, 1 x 100 mm, 3 x 60 mm EasyControl control EC10 + simple intuitive operation of the machine Four control programs can be stored Aggregates: Top pressure manual adjustment Infeed fence (manual adjustment with SIKU counter) Fuegefraesen with slide cutters Kontaktheizschuh to heat the plate Change pool colour change (currently exists for a pool) Gluing unit with automatic edge feeder roll material up to 3 mm Pressure zone with 3 rolls Caps wit ... more

New in: 2015
Price: request quote
Location: Lager Ennepetal H 2
Seller: Wirths GmbH, Werkzeugmaschinen

round bar steel: 55 mm square edge steel: 50 mm L-beam: 150 x 150 x 16 mm hole punhing press: pressure: 115 t hole punching press: capacity (dia. x thick.): 34 x 26 mm notching: width x thickness: 60 x 13 mm flat steel: 380 x 25 mm total power requirement: 11 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2 x 1 x 2,1 m more

New in: used
Price: 1.500 €
Location: Land-de DE Nordbaden
Seller: Jürgen Wienholz Bäckereimaschinen

Salem Rondo combined 613 functional more

New in: 1991
Price: request quote
Location: Goldenstedt
Seller: WeMa A. Pigge GmbH

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. more

New in: 1998
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Year of construction 1998 Clamping force of 500 kN Snails Ã? 30mm Control: NC 4 Dimensions: L = 3800 mm W = 1200 mm H = 1800 mm Weight: 2.5 t Facilities: -1 x hydraulic core pulling -Outlet combination -Printer -EUROMAP 12 interface -Adapter on EUROMAP 67 -4-way tap 29mchxm Hours of operation: ~ 85.000 h (Due to a change of IBED some years ago the machine count in the control unit is not correct. Estimated hours of operation. Machine was usually 2-ply) Condition: Machine is operational, Production currently in demand in the 2 - / 3-layer operation. more

New in: used
Price: request quote
Location: Goldenstedt
Seller: WeMa A. Pigge GmbH

flat steel: 150 x 16 / 200 x 13 mm no. of strokes: 40 Hub/min L-beam: 120 x 12 / 90 x 9 mm no. of strokes: 32 Hub/min round bar steel: 45 mm square edge steel: 40 mm notching: rectangle tool: 52 / 85 mm notching: triangle tool: 70 mm hole punhing press: pressure: 60 t hole diameter in sheet thickness: 27 in 17 mm throat: 370 mm stroke: 25,5 mm no. of strokes: 40 Hub/min dimensions: 1700 x 1000 x 2000 mm weight of the machine ca.: 2,2 t 5-fold combined section steel shears for flat, bar, profile and angle steel with punch and notching device punch in flange U-steel / I-steel: 80 - 300/80 - 340 mm in the bar U-steel / I-steel: 80 - 400/80 - 400 mm On revolving machine base Extensive accessorie ... more

New in: used
Price: 1.895 €
Location: Land-de DE 97076 Würzburg, Gattingerstr. 11c
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

1,350 mm straight piece + 90 ° roller curve right as a combination Rolling curve: 90 ° right running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1350 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round belt curve + straight piece double-sided edge guide included Support: optional, 3 piece double support, price: â?¬207,00 Height role OK 800 +/-100 mm more

New in: used
Price: request quote
Location: Goldenstedt
Seller: WeMa A. Pigge GmbH

round bar steel: 45 mm square edge steel: 42 mm L-beam: 130 x 13 mm notching: rectangle tool: 14 x 30 x 55 mm weight of the machine ca.: 3,5 t more

New in: 2011
Price: request quote
Location: Land-de DE 84494 Neumarkt-St.Veit, Landshuter Str. 5a
Seller: Bavarian graphics

Horizon MKU 54 Mobile sword Folding Unit Year of production: 2010-2011 Fits all horizon models Excellent, like new condition! Available now! more

New in: used
Price: request quote
Location: Bottrop
Seller: Sperling Werkzeugmaschinen

round bar steel: 30 mm square edge steel: 28 mm L-beam: 80 x 8, 80 x 65 x 8 mm stroke: 0 - 30 mm hole diameter -setting by hand: 30 x 10, 20 x 15 mm throat: 175 mm plate thickness: 8 mm flat steel: 150 x 10 mm : 60 x 6 mm work height max.: 1055 mm pressure: 40 t total power requirement: 4 kW weight of the machine ca.: 0,81 t dimensions of the machine ca.: 1,0 x 0,65 x 1,75 m stam tools: more

New in: used
Price: 1.675 €
Location: Land-de DE 97076 Würzburg, Gattingerstr. 11c
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

90 ° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90 ° link running Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert Guide on both sides: optional, price: â?¬137.00 3 support: optionally available, price: â?¬207,00 Height role OK 800 +/-100 mm more

New in: 2017
Price: request quote
Location: D-72531 Hohenstein-Bernloch
Seller: Rauscher & Reyhing GmbH

planing width: 520 mm planing height: 250 mm : 7,5 kW more

New in: used
Price: 1.920 €
Location: Land-de DE 97084 Würzburg, Gattingerstr. 11c
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

90 ° roller curve left + 1.600 mm straight pieces with chains above slide as a combination Rolling curve: 90 ° linkslauf Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,600 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm including 90° pull chains, chain clearance 450 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round belt curve + straight piece Guide: both sides included as shown Support: optional, 3 piece twin supports, height OK role 750 +/-100 mm, price: â?¬207,00 more

New in: 1977
Price: 5.800 €
Location: Grenzach-Wyhlen
Seller: Gromag AG

round bar steel: 50 mm square edge steel: 45 mm L-beam: 90x11 mm Punching capacity: 800 kN flat steel: 70x30 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more

New in: 1994
Price: request quote
Location: Land-de DE Niedersachsen
Seller: Georg Dickhaut Nachfolger

1 mobile steam boiler plant, run high pressure steam, steam capacity 1500 kg / h, operating pressure 10 bar, equipped with a combined combustion, light oil/natural gas, make Weishaupt, control cabinet, valves, control devices, control equipment TRD 604-24 h, BOB, Boiler feed pumps, water tanks, fireplace, 1 double-walled light oil tank DIN 6616/D, 10 m³ The system is still up to the 31.12.2018 in operation. more

New in: 2014
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

engine output: kW Feeding opening: mm ginding chamber dimensions: mm --------------------------------------------------: DIMENSIONS / WEIGHTS: - space requirements -left/right-: 5500 mm - space requirements -front/back-: 3400 mm - total height: 4688 mm - total weight approx.: 23000 kg Chip shredder with deoiling centrifuge Throughput 2000kg per day Domestic equipments: - Lift-and-tilt device type HKV with delivery height 2700mm, lifting weight 500kg - funnel hydr. Press-in device, operating pressure 100bar - single shaft crusher - Machine frame contaminant output - Hinge plate conveyor SP400, usable width 400mm lower edge ejection 4400mm - Switchgear combination - CEPA centrifuge - Sink ... more

New in: used
Price: 1.820 €
Location: Land-de DE 97076 Würzburg, Gattingerstr. 11c
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

90 ° roller curve left + 1,875 mm straight piece as combination Rolling curve: 90 ° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round belt curve + straight piece Page management: optional, price: â?¬122,00 Support: optionally available, price: â?¬276,00 Height role OK 800 +/-100 mm more

New in: 2002
Price: request quote
Location: Bünde bei Bielefeld
Seller: Plum & Partner Werkzeugmaschinen GmbH

thread dia.: 8 mm threading length: 60 mm throat: 200 mm thread bore capacity in steel: M2 - M8 thread bore capacity in brass: bis M 12 thread bore capacity : bis M 10 spindle stroke: 60 mm boring chuck: B 16 spindle speeds:: 710 + 1800 UpM column diameter: 85 mm table surface area: 290 x 350 mm total power requirement: 0,6 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 0,5 x 0,7 x 0,96 m Condition: good: Condition: ready for operation: Electric 380 Volt: Seperate control cabinet: Automatic high-performance threading machine with guide cartridge device, single and autom. Permanent stroke, tap breaker, drive via brake motor. The Speeds are achieved via belt pulley com ... more

New in: used
Price: 1.744 €
Location: Land-de DE 97076 Würzburg, Gattingerstr. 11c
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

90 ° curve roller + 1,350 mm straight piece as combination Rolling curve: 90 ° right running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1350 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round belt curve + straight piece Page management: optional, price: â?¬105,00 Support: optional, 3 piece double support, price: â?¬207,00 Height role OK 800 +/-100 mm more

New in: used
Price: request quote
Location: Bünde bei Bielefeld
Seller: Plum & Partner Werkzeugmaschinen GmbH

thread dia.: 2 Zoll threading length: , mm thread pitch: 2 Zoll bolt thread from: 1/2 - 2 Zoll total power requirement: 0,5 KW weight of the machine ca.: 60 kg dimensions of the machine ca.: L 800 x B 500 x H 600 mm cooling oil pump: Cutter: tripod: automatically oeffnender Universal Die head: Elektric 220 Volt: Machine dealer with own stock of 2500 m² and certification of the database Machineseeker. more

New in: used
Price: 3.396 €
Location: Land-de DE 97076 Würzburg, Gattingerstr. 11c
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

90 ° roller curve right + 650 mm straight pieces with chains above slide as a combination Rolling curve: 90 ° clockwise rotation Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 650 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm including 90° pull chains, chain clearance 450 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round belt curve + straight piece Siding: on both sides including Supports: 3 piece double support including, height OK role 750 +/-100 mm more

New in: 1983
Price: request quote
Location: Bünde bei Bielefeld
Seller: Plum & Partner Werkzeugmaschinen GmbH

hole punhing press: pressure: 60 t stroke adjustable: 15-30 mm mm perforates:: 27 Durchm in 17 mm punching throat: 510 mm profile shear: angular steel 90°: 120 x 13 mm tipping mechanism: 13 mm flat steel shear: 500 x 14 mm oil volume: 80 l Drive: 7,5 kW weight of the machine ca.: 2380 kg dimensions of the machine ca.: 1,8 x 0,9 x 1,9 m Condition: ready for operation: Electric 380 Volt: Foot switch: Positioning rod: Hydraulic machine with 5 stations, punching table to hole dance side, all achievement data refer to a material strength of 450 N/mm ². Machine dealer with own stock of 2500 m² and certification of the database Machineseeker. more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: