Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 158218394

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 10,00 mm Sheet width: 2000 mm Depth rear gauge: 0 mm Maximum sheet thickness:    10mm Max. cutting length:        2.000mm Strokes on full length:     100mm Strokes in short 1000 length:1000 Number of down holders:     11 Approach speed:             50mm/sec. Power:                      15kW Length:                     2.700 mm  Width:                      2.050 mm  Height:                     2.050 mm  Weight:                     5.900 kg 

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158219110

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 15,00 mm void: 0 Table length: 3200 mm Table width: 0 mm Knife length: 3200 mm SPECIFICATIONS Controll  Conventionel  Guillotine / Lazer / Cutting table   Hydraulic Guillotine Cutting lenght  3200 mm Maximum sheet thickness 15 mm Throat 100 / 400 ? mm Backgauge stroke X in mm  5 - 1000 mm DIMENSIONS   Length  3600 mm Width   2300 mm Height  2200 mm  

Category: 109 other metal working machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 157075137

used

check Seller: APT
Location: Deinze Land-be

add to watchlist

Type: PL.15.20.4 (presse à planer) with movable cylinder Horizontal movement of portal: 3100 mm Movement of cylinder (left to right): 1800 mm Capacity: 150 ton Max ram adjustment: 400 mm Drawningspeed: 45 mm/sec Workingspeed: 4,8 mm/sec Returningspeed: 69 mm/sec Passage between uprights: 2000 mm Max distance between table - ram: 800 mm Dimensions of the table: 4000 x 2000 mm Tableheight fixed - sliding: 800 mm Electric motor (power): 7,5 HP Length: 4800 mm Depth: 3930 mm Height: 3450 mm Weight: 19,5 ton

Category: 106 presses / Bending Presses
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 157172685

used

check Seller: Intermach BV
Location: Holland Land-nl

add to watchlist

pressure: 140 t chamfer lenght: 3000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2010012 Type of machine Pressbrake Make COLLY Type 3000/140 Build in nb Chamfer lenght 3000 mm Pressure 140 ton Stroke 250 mm Throat 310 mm Daylight 520 mm Additional information incl. 1 set of tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109 other metal working machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 158451579

used

check Seller: APT
Location: Deinze Land-be

add to watchlist

Type: P502A Capacity: 50 ton x 2100 mm Passage between uprights: 1600 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 80 mm Locking speed: 40 mm/sec Working speed: 7,5 mm/sec Returning speed: 47 mm/sec Electric motor (power): 5 HP Length: 2070 mm Depth: 1180 mm Height: 2040 mm Weight: 3 ton

Category: 106 presses / Bending Presses
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794566

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Hydraulic Press Brake make Colly Type PS 125/3 Year of construction 1991 Technical specifications: Max. Pressure capacity 125 t Work length 3100 mm Through 2550 mm Stroke 250 mm Drive power 9.0 kWwith - Tools - CNC Control Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 106 presses / Bending Presses
Latest update: 29.02.2024 add to watchlist
approved
dealer
item-No.: 160803995
New in: 1984

used

check Seller: DH Maschinenhandel
Location: Land-de

add to watchlist

Working width 2000 mm, depth stop approx. 500 mm, YOC 84 Control

Category: 106 presses / Press Brakes
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 163239123

used

check Seller: Retec Machines S.A.S
Location: 68190 Ensisheim Land-fr

add to watchlist

Press Brake COLLY type 655 Max capacity: 65 T Bending length: 2500 mm Travel: 100 mm Throat depth: 250 mm Distance between columns: 2100 mm Motor power: 4 kW Delivered with 1 multi V 55 x 55 mm - Length 840 mm + 1 multi V 55 x 55 mm - Length 2500 mm Voltage: 380 V Length: 2600 mm Depth: 1200 mm Total height: 2000 mm Weight: 3,7 T

Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
item-No.: 163506032
New in: 1986

used

Seller: Exapro
Location: Land-fr
Price: 22.500 € add to watchlist

Type 3010 Year 1986 Power adjustable from 0 to 300 Tons Total bending width 4100 mm Bending width between uprights 3150 mm Gooseneck 300 mm Stroke 250 mm Max. table/slide distance 500 mm Motor power 25 kW Table depth 890 mm Dimensions 4220x1850x3200 mm Total weight 21400 kg Very large set of tools, bending blades, multi-cavity dies, dies with very large openings for crunching and forming

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163428994
New in: 1996

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 4.500 € add to watchlist

Guillotine shears, FASTI type 506-10-2,5 Masch. Nr. 96-506-018 Year of manufacture 1996 Cutting length 1030 mm Cutting thickness 2.5 mm Working height 850 mm Drive power 4 kW Mains connection 400 volts, 50 Hz. - mechanical sheet metal hold-down - electric foot switch - simple backgauge 550 mm with handwheel adjustment - 2 support arms 550 mm - angle stop right 750 mm - protective housing SICK behind the machine - control cabinet fixed to the machine space requirement L x W x H 2150 x 1650 x 1400 mm weight 650 kg good condition; used

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 161473503
New in: 1977

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 4.800 € add to watchlist

guillotine shears, sheet metal shears DIGEP type OL 3 Fabr. No. 1312 Year of construction 1977 Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mm Cutting thickness at 450 N/mm² 3 mm single backgauge 500 mm Column projection 200 mm Cutting angle 2 Stroke rate at full cutting length max. 50 strokes/min. Working height 860 mm Motor power 2.2 kW Mains connection 380 volts, 50 Hz - LED cutting area lighting - simple backgauge with manual adjustment - Mechanical foot switch - Front angle stop left - 1 piece front sheet metal supports 300 mm Space requirement L x W x H 1660 x 1350 x 1200 mm Weight 1600 kg good condition; used

Category: 107 sheet metal working / Guillotine Shears
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12778725
New in: 1963

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Working width: 1040 mm sheet thickness: 12 mm rear gauge: hand up to 500 mm power: 380 V, 11 kW space: 2500 x 2150 x 1900 mm weight: 4100 kg

Category: 107 sheet metal working / Guillotine Shears
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12778735
New in: 1965

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Working width: 2500 mm sheet thickness: 4 mm throat depth: 70 mm rear gauge: 520 mm power: 380 V, 6.3 kW space: 3200 x 2300 x 1270 mm weight: 4600 kg

Category: 107 sheet metal working / Guillotine Shears
Latest update: 07.02.2024 add to watchlist
approved
dealer
item-No.: 76884162

new

check Seller: DutchMach
Location: Land-nl

add to watchlist

OSTAS PLATE SHEAR TYPE RGM 1050 x 3 -Capaciteit 1050 x 3 mm -Achteraanslag -Voetbediening -Remmotor -Plaathouders -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 107 sheet metal working / Guillotine Shears
Latest update: 09.09.2023 add to watchlist
approved
dealer
item-No.: 121139895

used

check Seller: DutchMach
Location: Land-nl

add to watchlist

OSTAS PLATE SHEAR TYPE RGM 1050 x 6 -Capaciteit 1050 x 6 mm -Achteraanslag electric -Voetbediening -Remmotor -Plaathouders -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218413

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 25,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm Maximum sheet thickness:        25mm Max. cutting length:            3.070mm Strokes on full length:         7mm Strokes in short 1000 length:   12 Cutting angle:                  0,5 - 2,5 ° Length backgauge:               1.000mm Number of down holders:         15 Control:                        Siemens  Safety guides:                  Sick  Operated mechanical or hydraulic:hydraulic  Power:                          45kW Length:&nb ...

Category: 107 sheet metal working / Guillotine Shears
Latest update: 09.09.2023 add to watchlist
approved
dealer
item-No.: 121596521

used

check Seller: DutchMach
Location: Land-nl

add to watchlist

SAY MAK PLATE SHEAR TYPE SRGM H 1400 x 3 -Capaciteit 1400 x 3 mm -CN touchscreen achteraanslag besturing met various functies -Geknipte plaat gets voor-of achter de machine uit (dat kiest u op touchscreen) -Pneumatic plaathouder eighth -Plaathouders voor -Voetbediening -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 107 sheet metal working / Guillotine Shears
Latest update: 29.02.2024 add to watchlist
approved
dealer
item-No.: 126750974
New in: 1990

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Working width: 3050 mm sheet thickness: 6 mm throat depth: back gauge: 650 mm power: 380 V, 16 kW space: 3680 x 2060 x 1870 mm weight: 7580 kg

Category: 107 sheet metal working / Guillotine Shears
Latest update: 08.02.2024 add to watchlist
approved
dealer
item-No.: 135317672
New in: 2006

used

check Seller: Pyramid Mühendislik
Location: Land-tr

add to watchlist

Cutting Lenght 6000 mm Cutting Thickness 16 mm Stroke per Min 10

Category: 107 sheet metal working / Guillotine Shears
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 129821980

new

check Seller: DutchMach
Location: Enschede Land-nl

add to watchlist

OSTAS PLATE SHEAR TYPE ORGM 2050 x 3 -Capaciteit 2050 x 3 mm -Achteraanslag -Voetbediening -Fotocelbeveiliging van de achterzijde -Oplegarmen -Verlichting van snijlijn -Remmotor -Noodstop -Documentatie -Weight 1900 kg -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 107 sheet metal working / Guillotine Shears
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 130182411

new

check Seller: DutchMach
Location: Enschede Land-nl

add to watchlist

OSTAS PLATE SHEAR TYPE ORGM 2050 x 3 -Capaciteit 2050 x 3 mm -Achteraanslag electrical -Voetbediening -Fotocelbeveiliging van de achterzijde -Oplegarmen -Verlichting van snijlijn -Remmotor -Noodstop -Documentatie -Weight 2000 kg -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 107 sheet metal working / Guillotine Shears
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 132206264

new

check Seller: DutchMach
Location: Enschede Land-nl

add to watchlist

OSTAS PLATE SHEAR TYPE ORGM 3050 x 4 -Capaciteit 3050 x 4 mm -Achteraanslag electrical -Voetbediening -Fotocelbeveiliging van de achterzijde -Oplegarmen -Verlichting van snijlijn -Remmotor -Noodstop -Documentatie -Weight 4100 kg -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 107 sheet metal working / Guillotine Shears
Latest update: 26.01.2024 add to watchlist
approved
dealer
item-No.: 144624171
New in: 2001

used

check Seller: Maquinaria Industrial Donosti Sl
Location: 20014 San Sebastian Land-es
Price: 8.000 € add to watchlist

Mecanica guillotine shear Arrieta CGM 10/2. Typing clutch. Sheet metal length: 1050mm. Sheet metal thickness: 2mm. Rear stops. Power: 1.5hp. Ce. Year: 2001

Category: 107 sheet metal working / Guillotine Shears
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 145607433

used

check Seller: DutchMach
Location: 7547ta Enschede Land-nl

add to watchlist

OSTAS TAFELSCHERE TYPE OGM 1050 x 1.5 - Capaciteit 1050 x 1.5 mm - Achteraanslag - Weight 450 kg DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 107 sheet metal working / Guillotine Shears
Latest update: 02.01.2024 add to watchlist
approved
dealer
item-No.: 144964312

used

check Seller: Maschinenservice
Location: Land-de
Price: 850 € add to watchlist

Sell a table scissors, which was used exclusively for plastic cutting. Manufacturer RAS Type: 50.20 Space requirement 2.5m*1.1m*1.6m High Cutting length 1020mm Nmyhr Cutting thickness 1.25mm Weight 220kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
COLLY 3rd category level
  • COLLY bending presses (2)
  • COLLY press brakes (1)
 
RESALE used machinery 25 years online