cold used for sale

COLD JET DRY ICE BLASTING MACHINE COLD JET MODEL 2000 DRY ICE BLASTER GOOD CONDITION EXWORKS HAMBURG GERMANY VOLTS 230 AMPS 4 PHASE 1 FREQUENCY 50/60 FULL LOAD AMPS 4 MOTOR AMPS 2.5 HP 1 SHORT CIRCUIT INTERUPTING CAPACITY 300A MAX OPERATING PRESSURE 300 PSI / 20.7 BAR SHIPPING WEIGHT 315 LB / 143 KGS

Star Cold Water Chiller 2015, Two fan system, refrigeration R404A, 3Ph

Dry ice cleaner with only 108 operating hours and flexible use of all types of dry ice ColdJet SDI 60 Select ice blasting machine from 2013 With blasting hose, blasting gun (applicator in industrial design with lighting), grounding cable, round nozzle 11mm and flat nozzle 45mm with integrated 3-stage scambler Power supply: 230Volt maximum dry ice capacity of the container approx. 27kg Dry ice consumption adjustable from approx. 0 to 160kg per hour Jet pressure range from approx. 1.4 bar to 17 bar Compressed air requirement depends on the nozzle used The gun with integrated light and the ability to switch between only air and air + ice is very practical The device can be used with 3mm dry ice pellets, or alternatively with ice blocks, discs and nuggets, in which case the required ice is scraped off. So you can flexibly use any available dry ice. Instruction manual in English ...

Description: with two motors , 1x power 1 HP 1x power 3 HP pipes not included Approx. Onsite Dimension. (l x w x h): 1,400 x 1,000 x 1,000 mm, weight approx.: 300 kg

Used cold room with storage freezer LILLNORD, type: Combirum C225-600 -In bakery condition- Refrigerator K 225-165 -10°C / +43°C - For 4 to 6 rack trolleys Storage freezer / fermentation interrupter TF 225-435 - 0° / -20°C - for 18 rack trolleys Assembly on request Condition: Very good, ready for immediate use Inspection and test run are possible by arrangement.

General SKU004U068 LocationBarneveld MakeThyssen Henschel TypeTK/D 125 No.850026 Year of construction1993 (has never been used) Pressure Working pressure jacket5 Bar Main Features MaterialStainless steel Volume7.5 Ltr. Motor15 KW Specified Features - Cold mixer Cold mixerContinuous high speed mixer (1x) Capacity7,5 Ltr Vessel sizesdia. 125mm Max. temperature200 Degr. C. With jacket(2,5 Ltr) With motor15,0 KW + 5,5 KW, 500 Volt (Ex) Rotor speedOuter mixing tool 60-2000 Rpm/Inner 1500 Rpm MaterialStainless steel 1.4541 (321) Information Mounted on framecheck Floorspace3,5x0,5 M Total height1,0 M ATEX compatiblecheck Extra Specifications- Easy clean - 2 counter-rotating mixing tools Cold mixersThyssen HenschelPlastic machinery > Cold mixersBrand > Thyssen Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

General SKU099Y827 LocationBarneveld MakeMixaco TypeLab. CM-12 Disp. No.SN 010280 Year of construction2001 Main Features MaterialStainless steel Volume12 Ltr. Motor3 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacity10 Ltr (useful) Vessel sizesdia. 250x135mm, Conical bottom 120mm Manual operated outletdia. 70mm With motor3,0 KW, 230/415 Volt With variable speed drive(frequency converter) MaterialStainless steel Information Mounted on framecheck With switchgearcheck Floorspace1,5x1,0 M Total height1,7 M Technical specs Extra informationconical bottom 120 mmCold mixersMixacoPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

General SKU203P131 LocationBarneveld MakeMixaco Maschinenbau GmbH (DE) TypeLAB CM 6-MB No.080139 Year of construction2008 Main Features MaterialStainless steel Volume6 Ltr. Motor5.5 KW Specified Features - Cold mixer Cold mixercontainermixer Capacity6 Ltr (nett) Vessel sizesdia.260x160mm With cover(jacketed ) Manual operated outletdia. 75mm Max. temperature90 Degr .C. With motor5,5 KW, 400 Volt MaterialStainless steel Information Mounted on framecheck With switchgearcheck Floorspace1.1x0.8 M Total height1,9 M Weight350 KGCold mixersMixacoPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU030H080 LocationBarneveld MakeMixaco Maschinenbau Neuenrade TypeLab CM 6-12 No.22.3406 Year of construction1999 Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume12 Ltr. Motor4 KW Specified Features - Cold mixer MaterialStainless steel Cold mixerContainer mixer (1x) Capacity4,8-10,0 Ltr (useful) Vessel sizesdia. 260x155mm, Conical bottom 135mm With covercheck Manual operated outletdia. 80mm With jacket(jacketed cover) With motor4,0 KW, 400/690 Volt With variable speed drive(Frequency inverter) With timercheck Information Mounted on framecheck With switchgearcheck Floorspace1,5x0,8 M Total height1,4 M Weight300 KG Technical specs Extra informationconical bottom 135 mmCold mixersMixacoPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...

General SKU094F478 LocationBarneveld MakeGebr. Ruberg Maschinenfabrik Nieheim TypeFCM-200 SR No.171/11577 Year of construction2001, Suitable for barrels dia. 582x1015mm Main Features MaterialStainless steel Volume200 Ltr. Motor7.5 KW Specified Features - Cold mixer MaterialStainless steel 1.4301 (304) Cold mixerBatch barrel mixer (1x) Vessel sizesdia. 650x400mm With motor7,5 KW, 400/690 Volt With lump breakercheck With motor4,0 KW, 400/690 Volt Information Mounted on framecheck With switchgearcheck Floorspace2,1x1,5 M Total height2,8 M Weight2350 KGCold mixersGebr. RubergPlastic machinery > Cold mixersBrand > Gebr. Ruberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.2 Links -Quantity: 10x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.415.2 Links -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.3 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.1 KRT lock V2A -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

Qty. 1 Second-hand double stand cold rolling mill stand Mfc.: SMS/Germany Type: 4-Hi Double Stand Cold Rolling Mill Built: 2009 Stopped: 2017 Capacity: 800,000 Ton/Year Annual running: 6480 h Strip width: 800 – 1650 mm Thickness entry: 1.8~5.0 mm Exit: 0.3 – 2.5 mm Coil OD: 1000~2200 mm Coil ID: 610 mm Coil Weight: Max. 30 T Line Speed: max. 1350 m/min Threading Speed: 30 m/min

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Cold water heater Delta DK KWE Storage 700 liters My: 2017 -Cold water heaters from Delta bakery machines -Content 700 litres -without refrigeration compressor max. operating pressure 6 bar -max. operating temperature +95 C

Process air chiller / chiller / chiller - air cooled, Type: Galaxy TECH GLT330HE_Special M.T.A. S.p.A. The Galaxy GLT 330 HE-special are compact chillers suitable for outdoor installation (from -20°C to +40°C) and for cold water temperatures down to -10°C. Equipped with: - shell and tube evaporators, - scroll compressors, - control cabinet, - shut-off valves for compressors, - Equipment for low ambient temperatures down to -20°C, - P3 pump, - 510 litres buffer tank, - compressor housing, -Vibration damper - Vitaulic couplings. Cooling capacity (kW): 900 Cold water temp. Exit/ Entry (°C): 7 / 12 Volume flow (m³/h): 171 Available pump pressure bar: 2,22 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration circuits (number): 4 Compressors (number): 12 Performance levels (%):0-8-17-25-33-42-50-58-67-75-83-92-100  ...

Process air cooler / chiller / chiller, air-cooled, Type: TAEevo Tech 1002 P3 MTA S.p.A. TAEevo Tech 1002 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 99 Max. current (A) 167 Starting current circuit (A) 371 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2155 Weight (kg) 2998 Connection Victaulic DN 100 Serial  ...

Process chiller / chiller air-cooled, Type: Aries TECH AST2 190 HE-MWT (Special) M.T.A. S.p.A. The Aries TECH AST2 190 HE-MWT are compact chilled water chillers suitable for outdoor installation (from -20°C to +48°C) with shell-and-tube evaporator, six scroll compressors, compressor shut-off valves, crank pan heating, phase monitoring, P3 double pump, tank 800 litres, electric antifreeze heating, EC fans, condenser filter and control and switch cabinet. Cold water outlet temperatures from -10°C to +20°C can be adjusted. Cooling capacity (kW): 539 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 92.1 Available. Pump pressure (bar): 3.4 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Number of refrigeration circuits: 2 Total number of compressors: 6 Power levels (levels): 6 Electrical data: Voltage V 400, Frequency 50 ...

Process water chiller / chiller / chiller water cooled, Type: TWEevo Tech 381 P3 MTA S.p.A. TWEevo Tech 381 P3 are air-cooled compact water chillers that are suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 60 ltr., built-in P3 pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 72.2 [20.5 tons cooling] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 12.3 Available pump pressure (bar) 3.46 Cooling water temp. Outlet/Entry (°C): 45 / 40 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 39 Max. current (A) 66 Starting current circuit (A) 234 Protection class: IP54 Dimensions: Length (mm) 2790, Width (mm) 1150, Height (mm) 2020, Weight empty / filled (kg) 975 / 1385 Connection R ...

No. 5230: 1 Gebr. Cold circular saw with additional gearbox for 4 speeds Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 with feed - roller conveyor approx. 2 m Arb.-Ber.: Ø 80-102 /flat 160x75/82 mm, drive power: 1.4/1.9 kW Other: Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + stop) Weight approx. 400 kg No. 5230: 1 used Cold circular saw with additional gearbox for 4 speeds Make EISELE, mod. VMS II - S - PV ( Type-No. 421 ), new 1986 with Feed - roller conveyor approx. 3 L Workrange: Ø 80-102 /Flat 160x75/82 mm, main motor: 1,4/1,9 kW Remarks: Auxiliary gear 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min saw blades Ø 275 - 315 mm space requirement approx. 80 x 90 x 180 cm ( plus roller conveyor + fence ) weight approx. 40 ...

NILFISK- Mobile cold water high-pressure cleaner-MC 2C-150/650 XT (POSEIDON 2-29 XT) Product Name: Mobile cold water pressure washer Type: MC 2C-150/650 XT (POSEIDON 2-29 XT) Manufacturer: Nilfisk Item number: 128470138 Year of construction: 2020 Condition: Brand new technical details: - Brass cylinder head - 3 x ceramic coated pistons - Automatic start/stop for long service life - Water volume regulation - Universal Plus lance with 4-in-1 nozzle - Steel-reinforced high-pressure hose - Removable 2 l detergent tank - Pressure: 150 bar - Pump speed: 2,800 rpm - Suction height (filled): 0.5 m - Cleaning effect: 2.9 kg/f - Water capacity qmax: 650/570 l/h - inlet temperature: 60 °C - electrical connection values: 230 V/1-phase/50 Hz/14.5 A - Power consumption: 3.3 kW - 5 m power cord - Hose DN6 15M on hose reel - Nozzle size: .0370 - integrated HD detergen ...

Vice for cold circular saw, saw vice -Vise: from a cold circular saw manufacturer FCB type OMP 06 -Dimensions: see photos -Dimensions: 700/200/H200 mm -Weight: 28kg

workpiece diameter:38 mm workpiece length:500 mm rack milling length - max.:610 mm profile width:92 mm module range:0,3-1,3 slide stroke:760 mm drive motor: kW electrics - voltage/frequency:380/50 V/Hz total power requirement:24 kW weight of the machine ca.:10 t Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves

workpiece diameter:38 mm workpiece length:500 mm rack milling length - max.:610 mm profile width:92 mm module range:0,3-1,3 slide stroke:760 mm drive motor: kW electrics - voltage/frequency:380/50 V/Hz total power requirement:52 kW weight of the machine ca.:10 t Spline/cold Rolling Machine EX-CELL-O XK 251 with automatic loading device FELSOMAT PE03, fitted in 1999 and tailstock. A cold rolling machine, intended for non-cutting shaping of profiles, such as plug type gearing (straight or diagonal), spiral gearing, oil grooves

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Cold water set water-cooled, turbo-cooling machine, Carrier 19XR5556, R134a, 400V 50Hz,Bj 2001,ca 2500KW (700ton)Cooling capacity, little operating hours, always maintained,very good condition, super efficiency.

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

TRENNJAEGER Cold circuit saege - see pictures

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

TUGRA ALU - COLD SAWS TYPE DK 400 -Zaagblad 400 mm -Verstek Dubbel -4 pneumatic clamps -Material Panel met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SMEVA 48 M2 Product number:M18-7071 Cooling capacity:0,001 kW Dimensions:8000 x 6000 x 2480 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold room of 48 m2, two entrance doors, 5 drawer kabinets and 10 glass doors (5 frames). Visit also our website: used-refrigeration

OBRIEN ALUMINIUM - COLD SAWS TYPE 350 VEGA I -Zaagblad 350 mm -Verstek Dubbel -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SMEVA 27 M2 Product number:M18-7070 Cooling capacity:0.001 kW Dimensions:9000 x 3000 x 2780 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold store with two rooms (15 m2 and 12 m2), an entrance door per room and 10 glass doors (4 frames). Visit also our website: used-refrigeration

OBRIEN ALUMINIUM - COLD SAWS TYPE II VEGA -Zaagblad 400 mm -Verstek Dubbel -4 pneumatic clamps -Nevelsmeerssysteem -Rollenbaan 300 cm met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

OBRIEN ALUMINIUM - COLD SAWS TYPE VEGA M II -Zaagblad 400 mm -Verstek Dubbel -4 pneumatic clamps -Nevelsmeerssysteem -Rollenbaan 300 cm met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OBRIEN ALUMINIUM - COLD SAWS TYPE BETA PLUS -Zaagblad 300 mm -Verstek Dubbel -Zaagkop kantelbare -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OBRIEN ALUMINIUM - COLD SAWS TYPE ALFA -Zaagblad 300 mm -Verstek Dubbel -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TUGRA ALU - COLD SAWS TYPE AC-400 -Zaagblad 400 mm -Verstek Dubbel -2 pneumatic clamp -Nevelsmeerssysteem -Material Panel met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.

Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min

Description Universal cold circular saw machine from eisele brand suitable for small and large series Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown Technical data -Saw blade diameter: 450 mm -Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown -Drive: 3/3.6 kW -with: coolant device -Cutting range at 90 degrees Round: 145 mm -Cutting range at 90 degrees square: 130 mm -Cutting range at 90 degrees flat: 240 x 70 mm -Cutting range at 45 degrees Round: 145 mm -Cutting range at 45 degrees square: 125 mm -Cutting range at 45 degrees flat: 170 x 70 mm -Cutting range at 30 degrees Round: 120 mm -Cutting range at 30 degrees flat: 120 x 70 mm -Profile size: max. 320 x 30/280 x 80 mm -Dimensions:  ...

Fully automatic cold cuts & packaging lines + labelers KUCHLER S.A.M. / Mettler Toledo Type: P2 Cut, store, multi-layer (SAM Paks 21x21 or 16x21), weigh & label at the touch of a button fully automatically. Technical data: Cutting machine: S.A.M. P310 f Interleafer: S.A.M. IL-4-220 Airless Welding station: S.A.M. KP 21 Airless Weighing & labelling equipment: PAZ S.A.M. - Mettler UC3 S.A.M. Air-Unit Mobile stainless steel table with sliding doors Manual Original knife grinder Other accessories see original pictures Year of construction of the plant: 2010 Condition, see original pictures! Email or call questions.

For sale is a cold water set in top condition. Technical data: Manufacturer: Trane Model : RTUB 212 Built: 2008 Refrigerant : R134 a In a container super soundproofed. Completely runs flawlessly. Price is net plus VAT

Hydraulic Miter Metal Cold Circular Semiautomatic Saw Fabr. KALTENBACH Type KKS 401 HMachine -No: 112710 built in 1991Saw blade size: 375/400/425 mmCutting width max .: 5 mmCutting speed: 10/20 m / minCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 mmxa0xa0xa0 45 ° square: 110 x 110 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmSaw blade feed speed: 0 - 1200 mm / minDrive power: 1.7 / 2.6 kWOutside dimensions: 1170 x 1070 x 1960 mmWeight (machine only): 1350 kglittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

saw blade diameter: 500 x 50 mm cutting diameter: 180 mm turning speeds: 3000 U/min capacity 90 degrees: round: 180 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 150 x 150 mm capacity 45 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 430 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 x 50 mm cutting diameter: 130 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 115 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 250 x 85 mm capacity 45 degrees: flat: 160 x 70 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 380 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts, Price: € 290.00 The data for this ad was created with ModulMWS - the software solution of  ...

Brand: CFT Model: TE Series Manufacture year: 2002 Production capacity: 15 tn per hour The series has been designed to improve the already superior performance of its predecessors, the MANZINI TE. 15 and TE.30. While preserving the important characteristics of its truncated cone-shaped screen, this new design permits a rapid changeover (without removing the paddles) because the narrow end of the conical screen is at the front of the unit, beneath the cover. The series of turboextractors has a peculiar characteristic: product emulsion due to air trapped within the product. In fact, the infeed of product is located on a completely closed cover and the centrifugal action of the paddles against the conical wall produces an impingement effect in the direction of product flow that helps pomace conveyance towards the expulsion channel. Turboextractors are specifically designed for e ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...