used CITIZEN WATCH Motors

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Technical data Max. turning diameter: 20 mm Turning length: 320 mm Max. drilling diameter: 12 mm Max. threading diameter: 10 M (Metric) Internal spindle diameter: 24 mm Spindle speeds: stepless from: 200 rpm up to: 8000 rpm Independent carriage: Number of positions: 3 + 5 number of driven tools: 3 Back spindle:: Ø 32 mm speeds: from: 200 rpm up to: 5000 rpm Spindle positioning increment: 15 ° Turret slide: number of tools: 10 number of driven tools: 10 Rapid traverse: X axis (longitudinal): 20000 mm/min C axis (spindle,resolution): 1 ° Voltage 50 Hz 3x: 400 Volt Spindle motor: 3.7/5.5 kW Total power required: 8 kVA Machine´s weight about: 2400 kg Overall dimensions machine: Length: 2800 mm Width: 1370 mm Height: 1800 mm Various accessories:  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 21070 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 23009 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 23805 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

Technical data Longitudinal travel (X-axis): 40 mm Transversal travel (y-axis): 45 mm Dimensions: Length: 550 mm Width: 350 mm Height: 600 mm Various accessories: Projector: Screen diameter: 100 mm

mitsubishi cnc cutting diameter 20 mm turning length 200 mm year 1997 prompt delivery machine without loader

This CITIZEN K16 VIIP Lathe was manufactured in the year 2007 in Japan. The machine has a spindle speed of 15000 rpm.

This CITIZEN M32 III (2011) Lathe was manufactured in 2011. It has a max. machining length of 320 mm and a max. machining diameter of 32 mm. It is controlled by a CITIZEN CINCOM control unit.

This Citizen L32-1M8 lathe was made in the year 2017 in Japan. It is equipped with a CINCOM SYSTEM M70LPC-VU control unit and has 6 axis. The machine has a 2 spindle with a speed of 8000 rpm and is in very condition and includes a bar feed magazine Iemca Boss 338.

This Citizen M-32V Lathe was manufactured in the year 2008. It is equipped with a Mitsubishi Meldas M70 control unit and has 9 axis. The machine has a spindle speed of 8000 rpm.

Turning diameter max: 20 mm Turning length max: 320 mm each spindle Drilling diameter max: 10 mm Max tap diameter: M8 Main spindle Speeds: 200 - 10,000 rpm. C-axis index: 0.001° Jerk spindle Speeds: 200 - 8,000 rpm. C-axis index: 0.001° Driven tools: 4 places / 200 - 5,000 rpm Driven tools rear: 4 places / 200 - 5,000 rpm. Tool turret: 10 places Bar feeder: FMB Diameter: 3 - 26 mm Rod length: 4,200 mm Country of origin: Japan Machine weight: 2800 kg Machine LxWxH: 3000 x 1400 x 1800 mm

turning diameter: 140 mm turning length: - mm control: MITSUBISHI spindle passage: 42 mm total power requirement: 14 kVA weight of the machine ca.: 3,3 t dimensions of the machine ca.: m Equipment: CNC control MITSUBISHI C axis Driven tools Two turret revolvers Main and counter spindle Bar loader make LNS, model QUICK Load Servo 3, year of construction 2005 Chip conveyor Huge accessory package with tool holders, tools, collets, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial no.Q16521 - Iemca Boss 332E-r/32 new in 2009 - drilling milling head (GSE 11107) - chip conveyor - Mitsubishi Meldas 700/730LUC? Control.

turning diameter over bed: 20 mm spindle passage: 24 mm turning length: 320 mm Control: CINCOM spindle turning speed - stepless: 200-10000 U/min turret head: weight of the machine ca.: 3.35 t dimensions of the machine ca.: 3.0x1.3x2.3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

equipped with Iemca Boss 432r/32LL new in 2002 - some tool holders - chip conveyor - Mitsubishi MELDAS 635 Control

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

Citizen L20 Swiss Type Lathe Machine is in good working condition Bar feeder included(FMB Brand) Tools are included

Citizen E25J CNC Swiss Type Lathe in very good condition Iemca mini boss 325 bar feeder 4 pieces live tools 10 pieces tool holder

Cincom L32 VII MCL2032/1633 automatic lathe. The current state of the machine - complete machine. It worked until it was turned off. It has a transfer and security sensor, so you will probably need to contact the manufacturer. Data: Full load current 29A Interrupt Capacity 2.5/2kA Input Voltage AC200V 3 50/60Hz Rated Power 10kVA Weight 2750 kg

Single spindle lathe 1) machine information Max machining diameter: 16 mm Maximum processing length: 200mm Motor power: 3.7 kW Spindle speed: 15,000 rpm Shaft C index: 0.001° Pickup spindle Max machining diameter: 16 mm Maximum processing length: 80mm Motor power: 1.1 kW Spindle speed: 10,000 rpm Shaft C index: 0.001° Power tools on vertical support Speed: 6,000 rpm Motor power: 0.4 kW Number of tools: 4 Tool system Turning tools: 5 Drilling tools (front): 4 Drilling tools (rear): 4 Tool holder, sleeves (diameter): 20 mm Tool holder, turning steels (shank section): 12 mm 2) bar loader information: minimag FMB 18 Material passage in the guide channel: from 2 to 13 (16) mm - (maximum diameter of the feed bar: 18 mm) Power requirement: 1.5 kW Maximum feeding force: 300 N (infinitely adjustable) Insertion speed: 0 to 300 mm/s (adjustable) Retur ...

Gebr. CNC longitudinal lathe Citizen C16-VI, YOC 2004 Control, Fabr. CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), Rod Ø max. 16 mm, Turning length max. 200 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle Ø max. 16 mm, Counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front hand, rear machining), Parts Conveyor Belt Conveyor Fire extinguishing system Loading magazine IEMCA Genius 118/3200 year 2005 The machine can be viewed by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Gebr. CNC longitudinal lathe Citizen L520-VII, YOC 2003 Control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Rod Ø max. 20 mm, Turning length max. 205 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front hand, rear machining), parts conveyor belt, Fire extinguishing system Conveyor Loading magazine IEMCA BOSS 432r The machine can be viewed by appointment. Subject to changes and errors in the technical data and information as well as prior sale!