used CHIRON CNC Milling Machines

Sell Chiron FZ12S functional, geometry checked. SK40 adapter 12-fold changer 10500 1/min spindle And a Chiron FZ12W as a spare part dispenser Replacement table shock absorber for the end position defective. Spare parts for the repair are included. Arms of the tool changer partially removed. All parts available. Partly as new spare parts. Enclosure fully closed also at the top Controls and geometry are fine Price net free loading

CNC Manufacturing Center Mill 2000 Commissioning 2007 4 - 5 axis machine Siemens 840 D Commuting X axis 2000 mm y axis 500 mm Z axis 550 mm 40 tool slots Rigid table with chip tray Clamping surface 2600 mm 550 mm with 3 T-slots High-speed package Rapid traverses 60 m/min Speed 20 - 12,000 rpm Coolant pump 30 bar 900 liters 2 extraction units as air purifiers Automatic grease lubrication 2x Rinsing gun Single-shift operation Spindle has been renewed and much more. The machine can be viewed under power

CHIRON FZ 18 W MAGNUM HIGH SPEED CNC milling machine was built in 1998 in Germany. The machine, equipped with an intuitive SIEMENS SINUMERIK 810M CNC controller, a powerful high-speed spindle and a 20-position tool head, is used in precision machining of steel and aluminium. The top-quality construction additionally ensures long, trouble-free operation and high stability under even the heaviest loads. This is why the CHIRON FZ 18 WM CNC milling center is the best choice for any industrial facility. The total weight of the machine is 5500 kg. Technical data of the CHIRON FZ 18 W MAGNUM HIGH SPEED CNC machining center - CNC control: SIEMENS SINUMERIK 810M - feed rates in the X/Y/Z axis: 750/400/600 mm - work table dimensions (L x W): 1240 x 850 mm - maximum spindle speed: 10500 rpm - spindle taper: SK40 - 20-position tool head - machining accuracy (spacing): 0.01 mm - machining  ...

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2**) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3***) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4****) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Dia ...

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2**) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3***) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4****) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Dia ...

Machine Dimension: Width: 4000 mm Depth: 2600 mm Height: 3000 mm Weight: 6,700 kg Control: Manufacturer: SIEMENS M0DELL: SINUMERIK 840 CNC main language: GERMAN Spindle speed range: 7,100 1/MIN Travel X-axis: 2000 mm or 2x 760 mm Y-axis: 420 mm Z-axis: 450 mm Table dimensions: 2300 x 400 mm Operating voltage: 400 V / 50/6 HZ Power: 16 kVA Nominal current: 23 A Fuse: 25 A Conveyor Coolant system additional equipment Automatic tool changer with 12 tool positions Conveyor without the vices

Technical data Table length: 280 mm Table width: 280 mm Voltage 50 Hz 3x: 400 Volt Power: 1.5 kW Machine´s weight about: 350 kg Overall dimensions machine: Length: 800 mm Width: 700 mm Height: 2200 mm Various accessories: Déclanchement à deux mains

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2**) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3***) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4****) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2**) 60m ...

X-travel: 1600mm, y-travel: 520mm, z-travel: 425mm, table dimensions: 2300x570mm, table height: 900mm, connected load: 36kVA, length: 4100mm, width: 3300mm, height: 2900mm, weight: 7t, operational hours counter: 62,437h, with documentation, was maintained regularly.

Length: 4100mm, width: 3300mm, height: 2900mm, weight: 7.2t, the spindle is defective.

X-travel: 550mm, y-travel: 300mm, z-travel: 280mm, max. load: 500kg, table dimensions: 950x370mm, spindle diameter: 50mm, connected load: 22kVA, controls: SIEMENS Sinumerik 810M, weight: 2.6t.

X-travel: 550mm, y-travel: 300mm, z-travel: 425mm, connected load: 8kVA, controls: SIEMENS Sinumerik 810M, including documentation.

Controls: SIEMENS SINUMERIK 810M, weight: 2.5t, with documentation, tool magazine and accessories.

X-travel: 4100mm, y-travel: 650mm, z-travel: 500mm, clamping table dimensions: 4600x710mm, table height: 840mm, controls: SIEMENS SINUMERIK, length: 7200mm, width: 3800mm, height: 3000mm, weight: 10.5t, with chip conveyor and documentation.

X-axis: 2000mm, y-axis: 400mm, z-axis: 560mm, connected load: 23kVA, weight: 4.7t, fourth axis axis with tailstock, ran in two-shift operation, on-site inspection is possible.

Compressed air supply: 6bar, connected load: 53kVA, weight: 9.5t, operational hours counter: 47,253h.

Compressed air supply: 6bar, connected load: 53kVA, weight: 9.5t, operational hours counter: 47,253h.

Compressed air supply: 6bar, connected load: 53kVA, weight: 9.5t, operational hours counter: 47,253h.

equipped with KNOLL fitter installation, type: KF 150/500 ( 2014)

equipped with KNOLL fitter installation, type: KF 150/500 ( 2014)

Description: including scraper belt conveyor SIEMENS SINUMERIK 840 D control system Spindle speeds 10500 1/min x-path 550 mm y-path 300 mm z-path 425 mm Rapid traverse: 30m/min Axes 4 Speed range 10500 1/min Spindle holder HSK 63 Tool changer 20 Pl Number of tools in the magazine 20 Pl Approx. Onsite Dimension. (l x w x h): 3,200 x 2,500 x 2,500 mm, weight approx.: 7,000 kg

Description: including scraper belt conveyor SIEMENS SINUMERIK 840 D control system Spindle speeds 10500 1/min x-path 550 mm y-path 300 mm z-path 425 mm Rapid traverse: 30m/min Axes 4 Speed range 10500 1/min Spindle holder HSK 63 Tool changer 20 Pl Number of tools in the magazine 20 Pl Approx. Onsite Dimension. (l x w x h): 3,200 x 2,500 x 2,500 mm, weight approx.: 7,000 kg

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2**) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3***) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4****)