We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Die Sinking Machine CHARMILES ROBOFORM 54P - C axis, automatic electrode change, Erowa, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 600 mm, Cross travel y axis: 400 mm, Vertical travel z axis: 450 mm, C axis travel: 360 °, Working table size: 750x500 mm, Work tank dimension: 1200x800x460 mm, Automatic electrode change nr.: 16, Power supply: Charmilles, Max working current: 64 A, Filter type: Cartridge paper, Weight: 3.600 Kg, Accessories: EROWA Sistem
used
Wire EDM CHARMILLES TECHNOLOGIES ROBOFIL 300 (1995) In production. X axis (longitudinal): 400 mm Y axis (transverse): 250 mm Z axis (vertical): 400mm Max piece length: 850 mm Max piece width: 500 mm Max piece weight: 500 kg Working tank length: 900mm Working tank width: 800mm Working tank height: 400mm Max piece height: 400 mm Length x width x height: 1800 × 1600 × 2230 mm. Weight: 2500kg
used
Table dimensions ( x-y/mm) 600 X 400 Type Wire Edm Stroke ( X/mm) 450 Stroke ( Y/mm) 320 Stroke ( Z/mm) 162 Type of controll Charmilles Location Turin Italy Machine Conditions Ce Marked Model 6030 Si Year of made 2002 automatic wire feed dielectric filtration and tank dielectric tank 900 l workpiece dimensions x: 1270 mm y : 800 mm z: 475 mm weight of the workpiece: 800 kg
used
Machine is in very good condition X movement (mm) : 350 Y movement (mm) : 255 Z movement (mm) : 255
used
table dimensions 450x350 mm X, Y, Z axis travel 270x170x200 mm weight 300 kg
used
Charmilles 31 EDM Wire Cutting Machine Machine is in good working condition
used
Charmilles 31 EDM Wire Cutting Machine Machine is in good working condition
used
CHARMILLES Type P25 die-sinking EDM Die-sinking EDM. never used. The car turns on
used
X-travel: 550mm, y-travel: 350mm, z-travel: 400mm, U-travel: 550mm, V-travel: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: approx. 60,000h, with documentation, an on-site inspection is possible.
used
Connected load: 5kVA, weight: 2.5t, the machine is defective, the cable of the C-axis motor is defective, an on-site inspection is possible.
used
Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible.
used
CHARMILLES FORM 20 MANUAL - 1990 Die Sinking EDM machine
used
CHARMILLES FORM 20 MANUAL - 1990 Die Sinking EDM machine
used
Die sinking EDM machine Make Charmilles type Roboform 51 built in 1999 X600 Y400 Z450 table 750 x 500 mm Max workpiece weight 1000 kg very well-kept condition machine plugged in, can be checked
used
Charmilles Robofil 310 CNC type Year: 1994 X axis Axis shift of 400 mm Axis Y axis shift 250 mm Z-axis travel 400 mm The stroke of the U axis is 400 mm The stroke of the V-axis 250 mm We attach 8 cartons of brass wire 0.25 and all the instructions including one in Polish
used
Charmilles Robofil 4020 Year 1996 Travel: X-450, Y-320, Z-270, U-100, V-100 Max cutting angle: 30 degrees Max workpiece weight: 500 kg Programmable axes: X, Y, Z, U, V Max dimensions of the detal - 990 x 505 x 270
used
Machine is in very good condition X : 600 mm Y : 400 mm Z : 350 mm
used
Charmilles D10 EDM sinking machine it is equipped with an Isocut E20 head, an Isopulse 80 generator with Microfin and an X and Y Iskra visualization. the machine works and is in very good general condition but has a problem with the hydraulic descent regulator, the machine has difficulty descending (this is a known problem on these machines) but it is surely repairable. the machine is supplied complete ready to use, with numerous tool holders + electrodes of all types and with the original documentation.
used
Charmilles Robifil 640 CC EDM Wire Cutting Machine X : 800 mm Y : 550 mm Z : 510 mm
used
The machine has been standing still for a couple of years now, so it needs a complete overhaul, it is not possible to see it in operation. - tank dimensions: 1105 x 765 x 435 [mm] - maxi dimensions of the pieces: 1100 x 760 x 360 [mm] - maxi piece weight: 800 [kg] - strokes: X x Y x Z: 450 x 320 x 162 [mm] - U strokes: +/- 50 [mm] - V strokes: +/- 50 [mm] - solution: 1 [µm] - wire unwinding speed: 2 - 15 [m / min] - rake angle: +/- 30 ° - tank dimensions: 1150 x 900 x 2280 [mm] - tank capacity: 1000 [l] - dimensions: 3700 x 2700 x 2300 - weight: 4930 [kg]
used
Agie Charmilles CUT30P EDM Wire Cutting Machine Axis movement: X, Y, Z : 600 x 400 x 350 mm Maximum workpiece size : X, Y, Z 1050 x 800 x 350 mm
used
Charmilles Robofil 440 SL EDM Wire Cutting Machine X : 550 mm Y : 350 mm Z : 400 mm
used
CHARMILLES ROBOFIL 510 - 1995 Wire cutting EDM machine
used
Fanuc CNC model Automatic threading yes Immersion EDM type Maximum wire inclination +/- 30° 400mm X Axis Travel 400 mm Y Axis travel 300 mm Z Axis travel 400 mm U Axis travel 500 mm V Axis travel 400 mm Maximum piece dimensions 900 x 600 x 400 mm Max piece weight 1000 kg
used
CHARMILLES ROBOFORM 550 - 2005 Die Sinking EDM machine