We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Spindle moulder Casolin F45L Spindle diameter 40mm Spindle total height 220mm Electric spindle height adjustment Electric spindle tilt angle adjustment +45/-10 Spindle speed adjustable 3000/4500/6000/8000/10000r.p.m 5.5kw main motor Aigner fences Extraction pipes 2x120mm Dimensions of the machine 265x130x180cmH Weight 980kg CE Certified
used
Pressing length: 3500 mm Pressing height: 2000 mm Total connection KW: 7
used
Sanding height max. 3-150mm ; Throughput: 6-12m/min
used
Key data: 400 mm, 3200 mm
SPECIFICATIONS: Saw blade diameter mm: 400 Motorized saw blade inclination 45° Slide length mm: 3200 Installed capacity: KW 4.0
used
Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm feed: 5-25 m/min CASOLIN MEGA 230/6 four-side planer -------------------------------------------------------- Machine still in use to visit! 6 spindles, with touchscreen controls. Width and height controlled. Spindle arrangement: 1. Spindle: below, 40 mm diameter, 6,000 rpm, 5.5 kW 2nd spindle: right hand, 40 mm diameter, 6,000 rpm, 11 kW together with 3. Spindle: left, 40 mm diameter, 6,000 rpm 4. Spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW 5. Spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW 6. Spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kW Machine without machining tools. The additional screen on the front of the machine is not included in the scope of delivery (belongs to the window system). (technical information according to the manufacturer - without guarantee!) The ...
used
Working width: 6000 mm Working height: 3000 mm Number of cylinders: 4 St. loading dimensions L x W x H: 7.175 x 1.600 x 3.790 mm weight: 3700 kg Casolin Euro ------------------------- HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. EURO Frame press in an extremely stable steel construction. The machine also allows the pressing of already milled wing and frame parts. Working dimensions: 6000mm x 3000mm Installation dimensions: Total length: approx. 7,175 mm Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed maximum pressing height above) = 4,130 mm Loading dimensions: Length: approx. 7,175 mm Height: approx. 3,790 mm Weight: approx. 3,700 kg (technical data according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CASOLIN sliding table saw model ASTRA 3000: – 3000mm steel trolley – width on parallel guide 1100mm – manual lifting and tilting of the blade unit – main blade D=400mm, 5.5 hp motor – 3 blade rotation speeds, 3000-4500-6000rpm – independent engraver, 0.75 hp engine – engraver rotation speed 8000rpm Machine not according to CE standards, for export AVAILABILITY FROM MAY 2024
used
SPECIFICATIONS: Working width: 3000 mm Working height: 2000 mm 03 Presses for vertical capping 02 Presses for horizontal capping Hydraulic machine
used
Description: Four-sided planer for processing classic parquet with chain drive It can process parquet from 200 to 600 mm and from 32 mm to 100 mm wide The capacity of the machine depends on the size of the parquet, up to approx. 150 to 300 m2 per shift Approx. Onsite Dimension. (l x w x h): 2,400 x 900 x 1,500 mm, weight approx.: 1,500 kg
used
Description: CASOLIN Planer with a chain for the drive and has the option of processing the upper, lower, right or only upper and lower elements Approx. Onsite Dimension. (l x w x h): 2,900 x 900 x 1,900 mm, weight approx.: 3,000 kg
used
CASOLIN tenosquaring machine model TSX3: – 3000mm steel trolley – protection suspended on the blade – tilting blade D=400mm max, 5.5 hp motor, with 3 speeds 3000-4500-6000rpm – engraver D=110mm, motor hp 0,75, 8000rpm – cutting width on rip fence 950mm – spindle moulder with shaft D=35 x L=170mm, engine hp 5.5 , with 4 speeds 3000-4500-6000-8000 rpm – weight approx. 1500 kg Machine not according to CE standards, for export
used
Description: Tilt orientation: 30° 45° 60° 90° 60° 45° -->, 105°  , Disc diameter: 360 mm, thickness: 3.2 mm Equipped with engraver diameter: 130 mm and thickness: 3.2 mm. cutting length: 2,050 mm, table length: 3,000 mm, cutting width: 1,860 mm, scoring saw: di spessore 3,2 e diametro 130 mm fine testo libero kW, swival range +/-: da 30 di orientamento 105 gradi inizio questo libro orientamento da 30 90 gradi a 45 gradi quindi 30 45 60 90 60 45 diametro disco 360 spessore 3,2 dotata di °, Approx. Onsite Dimension. (l x w x h): 3,800 x 3,600 x 1,700 mm, weight approx.: 1,600 kg
used
Description: Equipped with tilting circular saw with guard and spindle moulder with 35 mm diameter spindle. Approx. Onsite Dimension. (l x w x h): 3,200 x 2,000 x 1,100 mm, weight approx.: 1,200 kg
used
Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI
new
Weibert WJ-F50 Table milling machine NEW Safety rulers in the shaper fence strongly ribbed cast iron table 1100x900mm electrical height adjustment 200 mm 5.5 KW R + L barrel 3000 to 10000 U/1 Control Panel top Milling spindle can be exchanged Tool - diameter When profiling 275mm at the tenoning 400 m stable role statement WJ-600600 K 4 Special price:
used
Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine ...
used
Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm
used
Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Konturfrä�maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.
used
SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50
used
Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)
used
Table dimensions mm: 1000 x 900 With drive system
used
According to the PDF prospectus!
used
Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition