1934 offers

maximum number of results exceeded > 1000
please refine your search

Category: 101: boring mills and machining centers
New in: 2006
Price: request quote
Location: Land-de DE 89547 Gerstetten, Charlottenstrasse 6
Seller: Luhan Werkzeugmaschinen

Traverse path x/Y/Z 500 mm x 450 mm x 400 mm Control HEIDENHAIN ITNC 530 NC rotary table spindle retainer HSK 50E 42 000 rpm Tool changer with 30 seats electronic Handwheel laser tool measurement in the workroom Blum infrared probe mode 4 Kühlagregat for spindle Cabinet Kühlagreggat Machine is in a mint condition geometric New linear guides in X/Y/Z axes new Kogellrollspindeln incl bearing in Z/Y new Milling spindle (DMG) All parts original dmg

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Category: 106: presses
New in: used
Price: request quote
Location: Land-de DE 91126 Schwabach, Bremer Straße 8
Seller: Schrenk Werkzeugmaschinen

. Power 35 to Stroke rate approx. 110 / min Projection 225 mm Plunger stroke 8-100 mm slide adjustment 70 mm Table size approx. 460 x 570 mm Mounting height approx. 320 mm (measured at-mounted clamping plate) Width x depth approx. 1.0 x 1.4 m plus Cabinet Height approx. 2.1 m Motor power approx. 1.5 kW Estimated weight approx. 1.7 to Equipment / scope of delivery: EBU - shield adjustable table clamping plate approx. 460 x 570 x 60 mm, hole approx. 100 mm electric foot switch with check book and new UVV testing, (exam & review com. EN 692)

Category: 110: accessories for machine tools
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

: 7 St. range L-W-H: 880 x 580 x 1200 mm weight: 156 kg : 100Kg je Lade

Category: 206: presses
New in: 1990
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Cabinet dimensions: 300-2500x680x300-1300mm, throughfeed width: 790mm, feed rate: 22.5m/min, connected load: 7kW, length: 5500mm, width: 1650mm, height: 2850mm, weight: 3t.

Category: 109: other metal working machines
New in: 1981
Price: request quote
Location: Willich
Seller: Teutenberg Maschinen GmbH & Co.KG

working range: 10 max. mm Drawing drum Ø: 650/600 mm drawing speed: max. 6.4 m/sec STRAIGHT-LINE DRAWING MACHINE Constr. Mill / Breitenbach Type: MTR 25 Year: 1981 working range: inlet. Ø 5,5 - 10 mm finished. Ø 3 - 6 mm drawing speed: v = max 6,4 m/sec number of drawing dies: 4 pieces The machine consists of: - overhead payoff - triple straight-line drawing machine: drawing drums- Ø 650mm - single drawing machine: drawing drum- Ø 600mm with lifting cage - electrical cabinet - command desks

Category: 1200: machines and plants for process engineering
New in: 1988
Price: request quote
Location: Land-pl PL 05-85 Ozarow Mazowiecki, Wolnosci 1a
Seller: Perry Machinery Poland

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm  ...

Category: 108: welding machines
New in: used
Price: used machinery auction RESALE 180 €
Location: Land-ch CH Switzerland, 9230 Flawil
Seller: Surplex GmbH

Weight approx.: 800 kg Dimensions (l x w x h) approx.: 3000 x 800 x 2000 mm Description: Serial number S.526.1.511/2, passage depth max. approx. 750 mm, E 468 mm, F max. 400 kW, P 5 kp/cm² , output min. 115 A, output max. 365 A, 1 transformer RAUSCHER & STOECKLIN AG ETT, output 152 kVA, primary current 380 V, secondary current 500 V, YOM 1989, including control cabinet X 331 T 25.5

Category: 304: thermoforming machines
New in: 1998
Price: request quote
Location: Land-uk UK 0 Gloucester, Walnut Tree Farm
Seller: Prola International Ltd

Make Illig Model RDK 54 Year 1998 Hours Approx 45000 Stations In Mould Cutting and Stacking Delivery Date Immediately Maximum Forming Area 500 x 380 mm Depth of Draw 120 / 120 mm Max Material Width 540 mm Max Mould Closing Force 5000 daN Maximum Cycles-Minute 40 Forming Pressure 5 bar Approx Total Length incl roll stand 7000 mm Approx Total Width incl Control Cabinet 3900 mm Approx Total Height 3100 mm Approx Total Weight 4500 kg Available Equipment (Not included) - Kiefel KVH 83 (2002) Preheater - 105mm PP Lid Mould for RDK 54 All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Category: 204: grinding machines
New in: used
Price: used machinery auction RESALE 30 €
Location: Land-it IT Italy, 10071 Borgaro Torinese
Seller: Surplex GmbH

Weight approx.: 250 kg Dimensions (l x w x h) approx.: 1200 x 800 x 1900 mm Description: For SANDINGMASTER calibrating machine. Lot composed of cabinet with abrasive paper inside. See photo

Category: 304: thermoforming machines
New in: 1992
Price: request quote
Location: Land-uk UK 0 Gloucester, Walnut Tree Farm
Seller: Prola International Ltd

Make Illig Model RV 53 Year 1992 Delivery Date Immediately Stations Forming and Cutting Maximum Forming Area 500 x 350 mm Minimum Forming Area 300 x 100 mm Height of Forming Above-Below Material 100 / 30 mm Maximum Cycles-Minute 20 Total Width incl Control Cabinet 1930 mm Total Length incl roll stand 6330 mm Total Height 2050 mm Total Weight 3000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 300 €
Location: Land-ch CH Switzerland, 1242 Satigny
Seller: Surplex GmbH

Weight approx.: 50 kg Dimensions (l x w x h) approx.: 730 x 740 x 1020 mm Description: Approx. 30 tool holders with various fittings (the fitting can differ from the delivered material), holder sizes: BT 30 with various collets, 1 tool cabinet with 5 drawers, 3 of them without drawers

Category: 1200: machines and plants for process engineering
New in: used
Price: 57.000 €
Location: Land-de DE Möllberger Str. 387, 32457 Porta Westfalica
Seller: Handeldienstleister

Note: make appointment! Frequency inverter AC drive -double door Cabinet -Safety locking system -Siemens 6SY7000-0AB66 fan Assembly -Siemens 3RT1075-6AF36 circuit breaker -Siemens 4EU2752-0UB00-0A inductance -Siemens 3RV1011-1EA15 circuit breaker -Siemens 5SX21 circuit breaker -Siemens 5TE7 circuit breaker -TW41GM converter -BA9053 power relay -Door fans etc. etc. Make: Siemens Type: Simovert VC Model: 6SE7032-6EG60 Serial number: T-P60747600018 Input: 3AC 380... 480 V 50-60 Hz zmin = 1% Output: 3AC 0 - 380 480 V 0-500 Hz Delivery on request extra charge

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 200 €
Location: Land-it IT Italy, 20831 Seregno
Seller: Surplex GmbH

Weight approx.: 350 kg Dimensions (l x w x h) approx.: 1000 x 500 x 2000 mm Description: See photos

Category: 307: rubber machines
New in: used
Price: request quote
Location: Land-de DE 92726 Waidhaus / Germany
Seller: DEWIKO.de Inh. Kicinski

DC drive 2 x 750 KW, complete drive control cabinet with two engines with air-water coolers, as well as two identical reserve engines

Category: 205: boring mills, machining centers
New in: 2005
Price: used machinery auction RESALE 10.500 €
Location: Land-ch CH Switzerland, 9552 Bronschhofen
Seller: Surplex GmbH

Weight approx.: 4000 kg Dimensions (l x w x h) approx.: 6500 x 4100 x 2500 mm Description: serial number 58654, 4-axis CNC machining center, travels X = 3060 mm, Y = 1146 to 1335 mm, Z CNC controlled = 345 mm, pendulum machining 2 x 950 mm, additional pneumatic feed stroke in Z axis 205/282 mm, max. workpiece throughput 1350 x 250 mm, rapid speed for X and Y axis 100 m / min, Z axis 30 m / min, C axis rotatable by 360 ° interpolating, incl. chain tool change magazine on the rear side with 14 positions, grid spacing 180 mm , traveling in the X direction, front plate changer, 8 places, grid spacing 102 mm, traveling along the X and Y directions, 13 BH 22 L drill heads, individually retrievabl ...

Category: 105: saws
New in: 2000
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Saw blade diameter 420 mm -Blade hole 30 mm -maximum cutting length 6000 mm -smallest cutting length 90° + 45 ° 335 mm -See diagram below cutting area -Swivel range to inside pneumatic 90-22.5 ° - tilt range inside pneumatically 90 - 45 ° -Blade rotation speed 2800 RPM -Drive: 400 V / 2 x 4000 Watts -Compressed air supply 7 bar -Air consumption per work cycle - no spray approx. 40 l -with spray approx. 64 l -Space requirement approx. B H 7500 x 1600 X 1600 mm -Weight approx. 1800 kg -with:-control ELUMATEC E 255-A -positioning-controlled cutting-length adjustment with digital display -Yoke swivel and tilt for high and wide pro ...

Category: 106: presses
New in: 1967
Price: used machinery auction RESALE 250 €
Location: Land-ch CH Switzerland, 1242 Satigny
Seller: Surplex GmbH

Weight approx.: 150 kg Dimensions (l x w x h) approx.: 800 x 600 x 1300 mm Description: Serial number 84007, capacity compressive force 1.5 t, including 1 additional press unit with pressing surface max. 60 x 80 mm, passage 70 mm, the eccentric press has a passage of approx. 165 mm, including foot pedal, control cabinet and further accessories

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-de DE Dettingen
Seller: GS-INDUSTRIESERVICE

Nominal temperature 250 ° C

Category: 0:
New in: used
Price: request quote
Location: Land-de Germany, 64589 Stockstadt am Rhein
Seller: GK Werkzeugmaschinen GmbH

grinding diameter:630 mm grinding length:3000 mm centre height:320 mm table speed -stepless-:0,005-5 m/min min/max. table longitudinal travel:5/ 3350 mm table speeds:8 m/min grinding spindle- cross travel:420 mm workpiece-spindlehead motor:3,0 kW output of wheelhead motor:22 kW motor internal grinding:3 kW lubrication pump motor:0,11 kW weight of the machine ca.:15700 kg dimensions of the machine ca.:H1970/B3100/L12650 mm technical documentation: wheel flange suspension: luminating devices: work piece drivers: work piece driver 110 - 160 mm: wheel dresser fitted on the tale stock: splash gurads: complete sedimentation cooling equipment: open tailstocks dia 250 mm: centers morse 6: changing b ...

Category: 1107: other energy machinery
New in: 1994
Price: request quote
Location: Land-de DE Deutschland
Seller: Andreas Fabig Maschinenhandel

3 identical CHP units available Fuel type: Natural gas / landfield gas Power el.: 488 kW Power th.: 426 kW Generator: Stamford HC634H, 608 kVA Incl.: Heat exchanger, control cabinet, technical documentation

Category: 0:
New in: used
Price: request quote
Location: Land-de Germany, 64589 Stockstadt am Rhein
Seller: GK Werkzeugmaschinen GmbH

grinding diameter:630 mm grinding length:2000 mm centre height:320 mm table speed -stepless-:0,005-5 m/min min/max. table longitudinal travel:5/ 3350 mm table speeds:8 m/min grinding spindle- cross travel:420 mm workpiece-spindlehead motor:3,0 kW output of wheelhead motor:22 kW motor internal grinding:3 kW lubrication pump motor:0,11 kW weight of the machine ca.:15700 kg dimensions of the machine ca.:H1970/B3100/L12650 mm technical documentation: wheel flange suspension: luminating devices: work piece drivers: work piece driver 110 - 160 mm: wheel dresser fitted on the tale stock: splash gurads: complete sedimentation cooling equipment: open tailstocks dia 250 mm: centers morse 6: changing b ...

Category: 302: extruders
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

TECNOVA RECYCLING EXTRUDER 120 mm screw 33 L/D Construction year 1988 Forced feeding silo and auger D.c. motor 220 Hp, 306 A Electrical cabinet for thermoregulation 10 heating areas 1 degassing system Screen changer Hydraulic power station Die face pelletizer

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

container: 7 different pcs., moveable\r\ninclude warming cabinet\r\ntotal size l 915, w 580, h 800 mm\r\n

Category: 302: extruders
New in: 2001
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

OMB BATTAGLIO PELLETIZER Type E160-CE Construction year 2001 Screw diam 160 mm 30 L/D Vacuum degassing pump Die face pelletizer Plate type screen changer Average output 750 kg/h 282 kw motor Installed power 440 kw Vertical centrifuge Vibro classifier Electrical cabinet

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

stainless steel, incl. proofer+ suction fan, \r\nbaking chamber: 5 pans 600 x 400 mm\r\nproofing cabinet: 16 pans 600 x 400 mm\r\n

Category: 302: extruders
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

PREALPINA 105 mm. For PE PP PC PS Average output 300/450 kg/h Construction year 1999 Good running conditions Including : Conveyor belt 3,5 kw Metal detector Reel feeder Grinder 45 kw Extruder with screw diam.105 mm. 40 L/D Double degassing system 7 Heating areas on barrel + 5 on head, screen, etc. Pressure sensor Screenchanger Die face pelletizer Water bath Centrifuge Extraction vent Cyclon Total installed power 262 kw Electric cabinet

Category: 102: lathes
New in: 2018
Price: request quote
Location: ab Werksstandort Non-EU
Seller: Kemmerich Werkzeugmaschinen GmbH

faceplate diameter: 5000 mm swing diameter: 6500 mm turning height: 4000 mm Control: FANUC 31i-A faceplate turning speed range: 1-50 U/min main drive motor: 150 kW tool change unit: 12-fold x-travel: 4245 mm z-travel: 2500 mm w-axis: 3000 mm ram diameter: 400 x 400 mm workpiece weight max.: 60.000 kg X- + Z-axis: each 14 kW total power requirement: ca 180 kW weight of the machine ca.: 270 t dimensions of the machine ca.: 19 x 12 x 12,1 m new/unused machine! Vertical Turning Center equipped with: - CNC control FANUC 31i-A - 1 ram on crossrail - A.T.C. (12-fold) MAS BT 50 - Coolant system - Hydraulic unit - Ladder - Splash Guard - X-axis slide way protect steel cover - Work light - Through too ...

Category: 302: extruders
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

PREALPINA 130 mm.35 L/D For PE PP PC PS Average output 450/600 kg/h Construction year 1998 Good running conditions Storage silo Forced feeding unit Screw diam.130 mm. 35 L/D, new in 2015 Extruder motor 250 kw Semi-automatic screen changer (renewed in 2017) Vacuum degassing unit Underwater pelletizer Water bath Centrifuge Extraction vent Electric cabinet

Category: 102: lathes
New in: 2018
Price: request quote
Location: ab Werksstandort Non-EU
Seller: Kemmerich Werkzeugmaschinen GmbH

faceplate diameter: 9000 mm swing diameter: 12000 mm turning height: 6000 mm Control: FANUC 31i-B faceplate turning speed range: 1-16 U/min main drive motor: 2x 100 kW tool change unit: x-travel: 6700 mm z-travel: 3000 mm w-axis: 4500 mm ram diameter: 500 x 500 mm c-axis: 0,111 U/min workpiece weight max.: 400.000 kg total power requirement: ca 320 kW weight of the machine ca.: ca 600 t dimensions of the machine ca.: 20,1 x 15 x 13,8 m new/unused machine: Vertical Turning Center with Live Tooling equipped with: - CNC control FANUC 31i-B - 2 ram on crossrail - Live Tooling / C-axis 0,001° - Milling Motor 60/75 kW, 15 - 1500 Upm - A.T.C. MAS BT 60 - 5 Axis controlled X,Z,C,W1,W2 (2 simultani ...

Category: 1101: power generators
New in: 2009
Price: request quote
Location: Land-de DE Deutschland
Seller: Andreas Fabig Maschinenhandel

Diesel unit, 78 kVA, 400 Volt, 50 Hz Generator: Stamford UCI274C1, 84 kVA Hours of operation: Approx. 60 Incl.: Control cabinet, 1000 liter tank, 4 batteries Available probably May 2019

Category: 109: other metal working machines
New in: 2008
Price: request quote
Location: Land-de DE Germany, 71679 Asperg
Seller: Surplex GmbH

Weight approx.: 450 kg Dimensions (l x w x h) approx.: 1500 x 800 x 2100 mm Description: KELCH KALIMAT C 36 Measuring& Testing Machine Serial no.. 1697 - incl. base cabinet, PC (EASY-WebSet), chalice USB-Counter, screen, keyboard, mouse - Documentation accessories: 6 pieces of different tool holders - Technical data: see pdf document

Category: 107: sheet metal working
New in: 1999
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -maximum cutting force 300 kN -maximum punching diameter up to 88.9 mm -Max that material thickness 6.35 mm -Work area without putting up 1000 x 2000 mm -Actual workspace 1145 x 2100 mm -Work area normally with putting 1000 x 4000 mm -Size work table 1000 x 3500 mm -maximum working speeds of the axes 50 m / min -Max stroke sequence. 320 strokes/min -2 collets min. / max. distance 160-1900 mm -Need for compressed air 6 bar -Power supply 400 V / 15 kW -Space B 4200 x T H 3800 x 2250 mm -Weight approx. 6500 kg -with:-tool station 360-degree rotatable programmable 0.01 ° -CNC control - div. accessories in the separate tool Cabinet

Category: 202: milling machines
New in: 1998
Price: used machinery auction RESALE 20.000 €
Location: Land-it IT Italy, 37053 Cerea (VR)
Seller: Surplex GmbH

Weight approx.: 5500 kg Dimensions (l x w x h) approx.: 7500 x 2350 x 2000 mm Description: CNC SCULPTING MACHINE - 5 AXIS - LA SCOLPITRICE 251 RBT 20-20 manufacturing year 1998 operating hours 6930 20x tailstocks 20x spindles with double outlet interaxis 200 mm operating length: 250 mm min - 1500 mm max axis nulling device Robox electric cabinet composed of air conditioner Italian/English control panel Italian/English user manual voltage 380 V-50Hz three-phase Shipment dimension: 1 machine body 7500 x 2350 x 2000 mm 1 electric cabinet 1800 x 600 x 2200 mm

Category: 308: other machines for plastic
New in: 2004
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

ISVE DUAL SHAFT SHREDDER 800 X 800 mm N.2 x 9 kw motors Construction year 2004 Complete with electric cabinet Machine is offered reconditioned

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 37 €
Location: Land-it IT Italy, 33048 San Giovanni al Natisone
Seller: Surplex GmbH

Weight approx.: 40 kg Dimensions (l x w x h) approx.: 900 x 450 x 2000 mm Description: Black structure, transparent glass door

Category: 309: mills
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

PREVIERO WET GRINDER MU510L 75 kW Loading hopper Steel rotor 1000 mm long x 550 mm. diam. water cooled Roll type outer bearings Scissor type cutting N.3 rotor + n.2 stator steel blades 58/59 HRC Adjustable still and rotating knives Belt transmission Closed rotor with exchageable knif holding parts Electric components with IP54 protection Epossidic paint Unloading hopper Complete with electric cabinet for management N.1 series of spare knives. Machine RECONDITIONED

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 257 €
Location: Land-it IT Italy, 33048 San Giovanni al Natisone
Seller: Surplex GmbH

Weight approx.: 20 kg Dimensions (l x w x h) approx.: 530 x 420 x 1780 mm Description: Wengè colored structure, transparent glass

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

COSTARELLI AGGLOMERATOR AGGLOMERATOR D1300 average ouput : 800-1200 kg/h depending on materials steel barrel diameter 1300 mm. main motor 250 kw grease lubricated motor bearings replaceable inner steel lining side door for inspection and blades replacement, shatterproof inspection window, sucking vent for steam extraction oleodynamic power station 0,75 kw with electrovalve which controls opening of unloading door. Temperature control system for hub bearings, Automatic pump for oil lubrication of hub bearings water loop cycle for cooling hub bearings belt. Electrical cabinet Dimensions: L mm.3950, W.mm.2280, H. mm.4652. Machine completely reconditioned in 2015 DISCHARGING  ...

Category: 103: milling machines
New in: 2003
Price: used machinery auction RESALE 19.900 €
Location: Land-de DE Germany, 74731 Walldürn
Seller: Surplex GmbH

Weight approx.: 14700 kg x-travel: 2000 mm y-travel: 1075 mm z-travel: 1000 mm control: HEIDENHAIN TNC 426 DIGITAL Dimensions (l x w x h) approx.: 5140 x 5100 x 3000 mm no. of tools in magazin: 20 turning speed range: 0 - 6000 rpm rapid travel range: 15 m/min table surface area l x w : 2200 x 710 mm feed range: 1 - 15000 mm/min tool taper: SK 50 / DIN 69871 B total power requirement: 28 kW Description: SACHMANN T 10 GP CNC Bed Type Milling Machine - machine no.: 196750 - control: Heidenhain TNC 426 digital technical data: traverse path: - X-axis 2000 mm - Y-axis 1075 mm - Z-axis 1000 mm working table: - dimension 2200 x 710 [mm] - max. table load: 3000 kg spindle: - spindle power 17 ...

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

TPA DUAL SHAFT SREDDER 1500 x 1.000mm. 110 kw Surdy steel structure shredding chamber 1.500 x 1.000 mm. n.2 shafts with 2 gearboxes and 2 oleodynamic motors 2×55 Kw (150 Hp) 60 mm diam knives with straight hooks open circuit oleodynamic power station with 5 m.pipes machine is offered reconditioned (photos taken before reconditioning) brand new electric cabinet

Category: 1300: other machines and plants
New in: 2003
Price: request quote
Location: Land-uk UK St. Helens
Seller: PostIndustry

This listing is for a 6-Axis robotic arm complete with Control Cabinet and Pendant Controller. Info?Working Envelope: 114.25” Wrist - Maximum Load: 133kg ?Forearm - Maximum Load: 45kg Weight: 1260kg

Category: 309: mills
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

MECCANOPLASTICA GRINDER 1.000 mm. Closed rotor width 1000 mm.diam.700 mm. Infeed 1.030 x 1.000 mm. Cutting chamber 1.040 x 710 mm. Hydraulic system for grid change and hopper opening N.3+3 knives on rotor N.2+2 knives on stator Water cooling system on bearings and granulation chamber Grease lubrication on bearings A.c.132 kw motor The machine is offered RECONDITIONED Grid 14 mm. Weight : 8.000 kg. Complete with electric cabinet Constructed in 2001, reconditioned Some spare knives

Category: 1300: other machines and plants
New in: 2003
Price: request quote
Location: Land-uk UK St. Helens
Seller: PostIndustry

This listing is for a 6-Axis robotic arm complete with Control Cabinet and Pendant Controller. Info?Working Envelope: 114.25” Wrist - Maximum Load: 133kg ?Forearm - Maximum Load: 45kg Weight: 1260kg

Category: 102: lathes
New in: 2008
Price: request quote
Location: Land-pl PL 72-34 Pobierowo, Jana z kolna 7
Seller: Machines4metal

Specifications: -Max. swing over bed: 2300 mm, -Max. turning diameter over slide rest: 1900 mm, -Max.workpiece length: L=8000 mm, -Bed width (guide bed): 2190 mm, -Faceplate diameter (4-jaw chuck): 2 000 mm, -Max. workpiece weight between centers: max. 60 000 kg, -Spindle speed range: 0,45 - 90 r/min -Swiveling angle of tool post: ± 90º, -Feeds of the lathe: 0,18-5,6 -Main motor: 60 kW, -Weight of machine: 36 400 kg, -Overall dimensions: L = 14,5m, B = 3,60m, H = 2,95m Equipment: -faceplate 2000 mm diameter, -taper turning device: 1 pcs, -self-centering rest: 1 pcs Modernization in 2008: -Repair of the machine's mechanical transmission, -exchange of the electri ...

Category: 1101: power generators
New in: 1999
Price: 425 €
Location: Land-nl NL Oudenbosch
Seller: DPX Power BV

Schneider Electric NSX 160H, Schneider Electric NSX 100H, Schneider Electric NSX 100H, , Socket Box, Fuse Box, Breaker Cabinet

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

REG MAC AGGLOMERATOR storage belt loading belt 1200 mm diam. average output 850-1150 kg/h 250 kw motor discharging hopper with auger electric cabinet control panel on machine side with staircase vacuum hood for steam exhausting the line is offered TOTALLY RECONDITIONED with WARRANTY

Category: 1101: power generators
New in: 1999
Price: 425 €
Location: Land-nl NL Oudenbosch
Seller: DPX Power BV

Schneider Electric NSX 160H, Schneider Electric NSX 100H, Schneider Electric NSX 100H, , Socket Box, Fuse Box, Breaker Cabinet

Category: 706: beverage machines
New in: used
Price: 19.000 €
Location: Land-de DE
Seller: Hümmer GmbH

- Pressure filler, make Seitz, type: Tirax SF-12, for 300 - 800 bph, with 12 filling valves, for normal + sterile filling of still and carbonated drinks at filling pressure up to 5 bar and for hot filling. Price: 9.500 € - Crown capper, for 500 - 5.000 bph, with 4 heads, automatic, with control cabinet. Price: 8.500 € - Collecting table for bottles, in s/s. Price: 1.900 € By total purchase is the price: 19.000 €

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 50 €
Location: Land-es ES Spain, 20500 Arrasate-Mondragón
Seller: Surplex GmbH

Weight approx.: 180 kg Dimensions (l x w x h) approx.: 3200 x 900 x 1560 mm Description: Lot of 2 metallic cabinets

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)