british flag
Resale Logo

CYLINDER used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used injection moulding machines and peripherals  Szczep-pol s.c.  http://www.wtryskarki-polska.pl 
banner logo
start page > keywords CYLINDER > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465335 2422

LKW ÖAF Gräf & Stift 20320G2 for sale


last off Code: BH-79040 Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer elapsed. Mileage: 132.490 km : KW 235 Displacement: 12.763 cc Test badge: no inspection sticke ...

 
last off Code: BH-79040
Year of construction: 1976, vehicle was never approved, authorities must be assumed by the buyer
elapsed. Mileage: 132.490 km
: KW 235
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 6970040
Equity / total weight: 12,900/22,000 kg
Number of seats: 2 in driver's cab
Equipment: material facilities, with rear mounted plane
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, loss of fuel, exhaust system strongly div. rubber bearings for axles and Wishbone rusted, porous, Doppelrollgelenke VA game Achsschenkel have right and left vertical game, compressed air brake system heavily leaking, div. Compressed air hoses porous, brake master cylinder leaking, different steering knuckle heads have Heckzellonen have game, faulty, battery jump, frame, springs and shock absorbers are rusted, missing parts of front, div. parts probably spare parts dispensers, vehicle not ready to go, rust all-round vehicle div. paint damage, paint differences, is pointed out expressly that no complete inventory and check the functionality of the auction object was performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-410-0037
 
Price  
    request
125460780 206

S+S Super for sale
Frame press


Working width: 4500 mmWorking height: 2500 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mmWeight: 3.500 kgElectrohydraulic frame presser S + S Superwith automatic adjustmentCE versionFrame press  ...

 
Working width: 4500 mm
Working height: 2500 mm
Number of cylinders: 6 St.
Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mm
Weight: 3.500 kg
Electrohydraulic frame presser S + S Super
with automatic adjustment

CE version

Frame press machine with 2 pieces movable presses, complete with 8 pieces
Holding cylinder for fixing frame parts, as well as with motor protection and
Control circuit breaker.

Size adjustment by optical length detection for height and width.

Working length x width: 4500 x 2500 mm

Rotating beam light curtain OTD 3

Medium pressure bar with automatic adjustment in height
up to 2500 mm high

Single pressure control for medium pressure bars

Cross-pressure device for pressing cross-bar window

Single pressure control for cross-pressure device

A triangle studio window crimping apparatus comprising:

Locking device of the vertical pressure beam
-3 push-on side-mounted pendulum pressure plates and regulators,
Central drive with single, pneumatic decoupling of the
Vertical pressure cylinder
(thereby independent of each other is the setting in any
Working height)


electrical hand control

Double pendulum plate

2 pendulum printing plates with extension (for triangular window triangle)


(Techn. Description according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465328 2479

PKW M1) Ford Bus Vario FT330 85 for sale


last off Code: BH-66701 Matriculation year: 24.01.2007 elapsed. Mileage: 135.903 km Power: 85 kW Displacement: 2.402 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-66701
Matriculation year: 24.01.2007
elapsed. Mileage: 135.903 km
Power: 85 kW
Displacement: 2.402 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: FDC6TRANSIT/TURNEO/JXFA2B/D9CCA
FIN: WF0SXXTTFS6G34663
Equity / total weight: 2,044/3,330 kg
Color: Blue
Body: Sedan
Number of seats: 9
Equipment: 6-speed manual transmission, radio, Electr. Window regulator front
Documentation: types of licence available
Key: 1
Comments to the State: oil leak at crank shaft sealing ring, injector leaking, div. Anrostungen on all axle parts, brake discs and pads are 1 cylinder renewed, is steering leak, various rusty Anrostungen on main and auxiliary frame, springs and shock absorbers,. Passenger seat cover, expanded storage space, manufacturer emblems bleached out, gall at hood, rust spots on steel rims,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
Asset number: 2310-41-000-3765 und2310-0-550-0283
 
Price  
    request
125460496 1900

Gas Cylinder Trolleys with Fittings


Weight approx.: 100 kgDimensions (l x w x h) approx.: 1200 x 2400 x 1600 mmDescription: 2 gas cylinder trolleys with 4 autgenous welded fittings with hoses, see photos for details

 
Weight approx.: 100 kg
Dimensions (l x w x h) approx.: 1200 x 2400 x 1600 mm
Description: 2 gas cylinder trolleys with 4 autgenous welded fittings with hoses, see photos for details
 
used machinery auction RESALE 85 €  
  DE   request
125465311 206

ITALPRESSE UT6L for sale
Hydraulic veneering presses


HOT PRESS Type ITALPRESSE UT/6L Solid Steel Plates heathed by water with wood fired boiler useful size plates mm. 2500 x 1300 n.06 cylinders diam.mm. 70 max. open mm. 650 hydraulic pump motor power Hp 2 Thrust Ton ...

 
HOT PRESS Type ITALPRESSE UT/6L
Solid Steel Plates
heathed by water with wood fired boiler
useful size plates mm. 2500 x 1300
n.06 cylinders diam.mm. 70
max. open mm. 650
hydraulic pump motor power Hp 2
Thrust Ton.120
max. pressure 4 kg/cm2

complete with security systems. perimeter rope
closing by bimanual buttons
opening by electric button
exclusion of 2 cylinders from the control panel
Volt. 380/50
net weigth kgs.4500
working conditions : Excellent
 
Price  
  IT   request
125460599 1900

ENERPAC P-392 for sale
Hydraulic Hand Pump with Cylinder and Accessories


Weight approx.: 150 kgDimensions (l x w x h) approx.: 1200 x 800 x 200 mmDescription: Max. 700 bar, piston rod diameter approx. 58 mm, with extension elements and chain suspension, see photos for details

 
Weight approx.: 150 kg
Dimensions (l x w x h) approx.: 1200 x 800 x 200 mm
Description: Max. 700 bar, piston rod diameter approx. 58 mm, with extension elements and chain suspension, see photos for details
 
used machinery auction RESALE 120 €  
  DE   request
125451746 805

HEIDELBERG SM 74-5 for sale


26.8 million print Autoplate Prinect AxisControl Heidelberg suctionfeeder Technotrans refrigeration with alcocontrol Automatic Blanket, Ink rollers and print cylinder washunits Powder unit Alphatronic 200 in an e ...
used machine
 
26.8 million print
Autoplate
Prinect AxisControl
Heidelberg suctionfeeder
Technotrans refrigeration with alcocontrol
Automatic Blanket, Ink rollers and print cylinder washunits
Powder unit Alphatronic 200
in an excellent condition, has at present Prinect System contract for regular updates on Software
2008
Price  
    request
125460713 1900

Hydraulic Cylinder + Grease Gun


Weight approx.: 15 kgDimensions (l x w x h) approx.: 500 x 300 x 150 mmDescription: A manual hydraulic cylinder, 2 grease guns, see photos for details

 
Weight approx.: 15 kg
Dimensions (l x w x h) approx.: 500 x 300 x 150 mm
Description: A manual hydraulic cylinder, 2 grease guns, see photos for details
 
used machinery auction RESALE 30 €  
  GB   request
125442453 816

GALLUS Gallus EMS 410 for sale


Gallus EMS 410, age: 2007 7 flexo print units 7 UV drying with cooling beams Corona Webcleaning die-cutting with Hydra jacks Video Tab control Sensotek screen printing unit Cylinder: Anilox - 60 pressure cylin ...
used machine
 
Gallus EMS 410, age: 2007
7 flexo print units
7 UV drying with cooling beams
Corona
Webcleaning
die-cutting with Hydra jacks
Video
Tab control Sensotek
screen printing unit
Cylinder:
Anilox - 60
pressure cylinder - 294
Paint cylinder - 17
punching cylinder - 23
Perfocylinder - 11
Sieve rings
2007
Price  
    request
125456645 702

W & P Wickelmaschinen - Hörnchen for sale
automatic dough dividing + moulding machine, fabr.


computer-controlled, 24 diff. programs, 2 speeds, laminating, dividing and moulding combined in one machine,\r\ndougweight range 65 - 800 gr., cap. 750 - 6300 p./h\r\nproducing of soft- and hard dough, f.e. ciabatta, bag ...

 
computer-controlled, 24 diff. programs, 2 speeds, laminating, dividing and moulding combined in one machine,\r\ndougweight range 65 - 800 gr., cap. 750 - 6300 p./h\r\nproducing of soft- and hard dough, f.e. ciabatta, baguette\r\naccessories: 2 four cylinder-moulders\r\nincl. extender to mould extra-long
 
Price  
    request
125437010 106

PHM 63 PHM 63 for sale
Hydraulic Presses


Hydraulic press PHM 63. Characteristic data of the PHM 63 press: - pressing force: 63 t - opening force: 33 t - table pitch: 300 mm - closing speed: 136 mm /s. - pressing speed: 4.3 mm /s. - opening speed: 122 m ...
used machine
 
Hydraulic press PHM 63.

Characteristic data of the PHM 63 press:
- pressing force: 63 t
- opening force: 33 t
- table pitch: 300 mm
- closing speed: 136 mm /s.
- pressing speed: 4.3 mm /s.
- opening speed: 122 mm /s.
- lower cylinder, extruder, ejector
- force of overload /ejection: 16 t
- return force: 10 tons
- speed of transfer /ejection: 13 mm /s.
- return speed: 21 mm /s.
- clearance between tables: 600 mm
- table dimensions: 500 x 500 mm
- mold fixing /cross T-slots on screws: M20
- tank capacity: 150 l /dm3
- the oil temperature measured in the tank should not exceed: 45 degrees Celsius
- electric motor: 4 kW
- maximum pressure: 320 kG /cm2, 32 MPa
- low pressure: 25 kG /cm2, 2.5 MPa
- supply voltage: 3 x 380 /220V
- dimensions (length x width x height): 710 x 1580 x 2200 mm
- net weight of the press: 2100 kg
1990
5,000 €  
  PL   request
125456915 702

RADEMAKER Auspresser für Füllungen for sale
extruder for fillings, Rademaker


2 cylinders, cap. variable speed 4 - 26 rpm\r\ncylinder diameter 2 pcs. 95 mm, grooved\r\n length 300 mm\r\ntemplate with 3 holes d 25 mm, distance 110 mm\r\ntemplate changeable\r\n

 
2 cylinders, cap. variable speed 4 - 26 rpm\r\ncylinder diameter 2 pcs. 95 mm, grooved\r\n length 300 mm\r\ntemplate with 3 holes d 25 mm, distance 110 mm\r\ntemplate changeable\r\n
 
Price  
    request
125421708 107

STANKOIMPORT IB 2222 V4 for sale
Roll Bending Machines


3-roll steel rolling mill STANKOIMPORT IB 2222 V4 16X2000 was built in the USSR in 1984. The three-roll plate mill has mechanical drive, the top roll yoke is also opened thanks to the mechanical gear. Technical data f ...
used machine
 
3-roll steel rolling mill STANKOIMPORT IB 2222 V4 16X2000 was built in the USSR in 1984. The three-roll plate mill has mechanical drive, the top roll yoke is also opened thanks to the mechanical gear.

Technical data for STANKOIMPORT IB 2222:
- sheet width: 2000 mm
- thickness of rolled sheet at bending: 16 mm
- thickness of rolled sheet at bending: 12 mm
- the smallest bending radius: 240 mm
- bending speed: 7.7 m / min.
- upper cylinder diameter: 270 mm
- Overall dimensions (L x W x H): 4040 x 2020 x 1745 mm
- weight: machine weight (without electrical cabinet): 9800 kg
- DTR - technical and movement documentation in Polish and Russian

Rollers for STANKOIMPORT IB 2222 steel sheets are designed for cold bending of rolled and conical ring segments made of sheet metal with a yield point T = 250 MPa (25 kg / mm2).
1984
22,225 €  
  PL   request
125456979 702

FRITSCH Wickelmaschinen - Hörnchen for sale
crescent-roll-machine, fabr. Rollfix, type Rollex


length cylinder 250 mm\r\nmachine is working without belt\r\nproduct range: crescents, beer sticks, salt sticks\r\n

 
length cylinder 250 mm\r\nmachine is working without belt\r\nproduct range: crescents, beer sticks, salt sticks\r\n
 
Price  
    request
125421678 105

ELUMATEC SA73 for sale
Circular Sawing Automatics


Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by mean ...
used machine
 
Automatic saw SA 73/36

Description
Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications
Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system
One, two or three-stroke feed can be selected using a selector switch
Reliable material feed using two horizontal clamping cylinders
Automatic machine shut-down at the end of the profile
Pulsed coolant system
Equipped with saw blade as standard
Technical specifications
Cutting range 150 x 110 mm
Saw blade diameter 380 mm
Saw blade speed 2,800 rpm
Power supply 230/400 V, 3~, 50 Hz
Power output 3 kW
Compressed air supply 7 bar
Air consumption per working cycle 19 l without spraying, 31 l with spraying
Length 1,500 mm, depth 1,100 mm, height 1,550 mm, weight 290 kg
Feed distance per cycle 5 – 250 mm (up to three cycles possible)
2005
Price  
  TR   request
125456725 702

SEEWER Schneidetisch for sale
cutting-table, stainless steel, fabr. Seewer, Type


belt: width 630 mm\r\ntable: lenght 3600 mm, width 720 mm\r\naccessories:1 triangle cutter,3 rows, h 175 , w 130 mm \r\n 1 cutting cylinders, longitudianal\r\n cutting, 3 stripes 17 ...

 
belt: width 630 mm\r\ntable: lenght 3600 mm, width 720 mm\r\naccessories:1 triangle cutter,3 rows, h 175 , w 130 mm \r\n 1 cutting cylinders, longitudianal\r\n cutting, 3 stripes 175 mm
 
Price  
    request
125412402 603  

MONARCH-SCALVOS PROTTI good models excellent conditio for sale


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 ...

 

MAJOR TEXTILE Knitting PLANT LIQUIDATION
(Please your intrest with confirmed target price immedaitely)



KNITTING
12
Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed
2
Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra
10
Monarch FIM 108A, 30", 24 cut, 108 feed
1
Monarch FDR Rib, 26", 14 cut, 52 feed
3
Monarch Rib, 26", 14 cut, 52 feed, Lycra
1
Monarch Rib, 20", 14 cut, 40 feed
1
Monarch SEC Electronic Striper, 30", 16 cut, 36 feed
6
Monarch FXC4S, 30', 20 cut, 122 feed
4
Monarch RACE, 30", 28 cut, 122 cut
1
Monarch STEP JACK, 30", 20 cut, 72 feed
14
Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut,
24
Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut,
7
Monarch FXC 4S, 26", 20 cut, 104 fd.
6
Monarch RX4S, 26", 20 cut, 104 fd.
8
Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut

FLAT KNITTING
2
Protti PV94 Doublelock, 240 cm, 12 gauge
6
Protti PT222, 213 cm, 12 cut
9
Protti PT242 Jacquard, 218 cm, 12 cut
35
Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge

DYEING
1
Gaston Jet Dye, 80 lb., 1996, M6000 Controller
4
Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15
3
Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987
1
Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller
4
Recore Dye Machine Controllers, 2012-14
6
Then Airflow, 1200 lbs., 3 strand/3 ports, 1988
1
Then Airflow, 400 lbs., 1 port, 1987
3
Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80
1
Arganthan Jet Dye, 400 lbs., 60 PSI, 1982
11
Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980
7
Gaston 824 Jet Dye, 5-3 port, 2-2 port
200
Stainless Mixing Tanks with mixers, 50 to 250 gal.
200
Dyehouse Trucks, 72" x 42" wide x 35" dp.


FINISHING
1
Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994
1
Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR
1
TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders
1
Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel
1
Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder
1
Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones,
1
Krantz Syncro Shrink Conveyor Dryer, 100" wide belt
2
Famatex Tenter #1 & #2
3
Tube Tex Drum Dryers, 48" wide & 72" wide
1
Fabcon Drum Dryer, 8 zone
5
Tubular Inspection machines
6
6
Fabcon Tubular Gullwing Tubular Compactors, 52" wide
Fabcon & Tubetex Tubular Calendars, 50" & 60" wide
1
Argathen Bleach Range, 10 section, 2200 lbs. hour.
1
Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995
1
Curtis & Marble, plastic roll wrapping
1
Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale
1
Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders
1

1
Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990
Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher
1
LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS
25
Merrow Sewing Machines, with table and motor
2
Gardner Denver Air Compressor, 60 HP
1
Gardner Denver Air Compressor, 200 HP
3
Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP
3
Propane Storage Tanks, 30,000 gallon, with mixer
4
Stainless Steel Outside Tanks, 6000 gal to 10,000 gal.
3
Waste Balers, vertical style
2
Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system


PLEASE CONTACT US FOR FURTHER INFORMATION .
 
Price  
  AE   request
125457035 702

SEEWER RONDO Wickelmaschinen - Hörnchen for sale
croissantline, fabr. Seewer Rondo , type Croma m


working width 604 mm, cap. max. 2.400 pcs./h\r\ncap. depends on the dimensions of the croissant\r\naccessories: input belt 600 mm\r\n cutting device\r\n a) croissantcutter\r\n  ...

 
working width 604 mm, cap. max. 2.400 pcs./h\r\ncap. depends on the dimensions of the croissant\r\naccessories: input belt 600 mm\r\n cutting device\r\n a) croissantcutter\r\n 4 rows h 130, w 160 mm\r\n cutting cylinders, longitudianal\r\n cutting, 4 stripes 130 mm \r\n b) croissantcutter\r\n 5 rows h 105, w 90 mm\r\n cutting cylinders, longitudianal\r\n cutting, 5 stripes 105 mm \r\n croissant-turning station \r\n croissant molder, belt width 250 mm
 
Price  
    request
125406976 842

HEIDELBERG SBG Cylinder Die Cutting for sale


Heidelberg SBG Cylinder Die Cutting Year: 1962 Serial: 20634 Size: 56x77 With Ink Unit (No Roller) Excellent Condition Available immediately Located in Turkey
used machine
 
Heidelberg SBG Cylinder Die Cutting
Year: 1962
Serial: 20634
Size: 56x77
With Ink Unit (No Roller)
Excellent Condition
Available immediately
Located in Turkey
1962
Price  
  TR   request
125456795 702

BURFORD Streu-Maschine, Burford for sale
strewer machine, fabr. Burford, stainless steel


Seeding - hopper for product l 1000 mm, w top 260, h 270 mm\r\nwith 2 strewer cylinder a) 780 mm, b) 680 mm \r\n

 
Seeding - hopper for product l 1000 mm, w top 260, h 270 mm\r\nwith 2 strewer cylinder a) 780 mm, b) 680 mm \r\n
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More CYLINDER models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Roll Bending Machines STANKOIMPORT IB 2222 V4


Rolling 3-roller for sheet metal STANKOIMPORT IB 2222 V4 16X2000 was built in the Soviet Union in 1984. Trójwalcowa sheet metal rolling mill has a mechanical drive, the yoke of the upper roller is also opened with gears. Technical data winders STANKOIMPORT IB 2222: -width: 2000 mm -rolled sheet thickness in bending: 16 mm -the thickness of rolled sheet at podginaniu: 12 mm -the smallest bending radius: 240 mm -bending speed: 7.7 m/min. -the diameter of the upper cylinder: 270 mm -overall dimensions (l x w x h): 4040 x 2020 x 1745 mm -weight: weight (without Cabinet): 9800 kg -DTR-technical-functional in Polish and Russian Fight for sheet metal bending are intended 2222 IB STANKOIMPORT cold rolled and tapered ring segments of the sheet with a yield T = 250 MPa (25 kG/mm2).

Circular Sawing Automatics Elumatec SA73


Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system One, two or three-stroke feed can be selected using a selector switch Reliable material feed using two horizontal clamping cylinders Automatic machine shut-down at the end of the profile Pulsed coolant system Equipped with saw blade as standard Technical specifications Cutting range 150 x 110 mm Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Air consumption per working cycle 19 l without spraying, 31 l with spraying Length 1,500 mm, depth 1,100 mm, height 1,550 mm, weight 290 kg Feed distance per cycle 5 – 250 mm (up to three cycles possible)

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

Heidelberg SBG Cylinder Die Cutting


Heidelberg SBG Cylinder Die Cutting Year: 1962 Serial: 20634 Size: 56x77 With Ink Unit (No Roller) Excellent Condition Available immediately Located in Turkey

Profiling Systems INTESO S3130T


Perforating machine INTESO S3130T was produced in 2011 year in the Czech Republic. Technical data machine profiles INTESO S 3130 T: -control panel screen: SIEMENS -maximum length: 3000 mm -the maximum cross section profiles dziurowanych: 120 x 80 mm; fi 80 mm -feed automatic linear drive -optical sensor for automatic control of the correct length of workpiece -linear positioning stroke hydraulic cylinder -bezdeformacyjna perforation technology -the possibility of perforation of the profiles of various shapes -program memory perf -perforation, double-sided (in a single operation) and one-sided-automatic lubrication Tool equipment top INTESO S3130 T: -perforated profiles: 40 x 27 x 2; 30 x 30 x 2.0 -punches and dies: 18 mm; 18 x 18 upper matrix, matrix Perforating line INTESO S3130T CE certification.

CNC Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Cylinder head MaK 8M35 & 6M35


MaK M35 COMPLETE CYLINDER HEADS FOR SALE. CYLINDER HEADS ARE SUITABLE FOR MaK 6M35 & MaK 8M35 ENGINES. CYLINDER HEADS FULL WITH EQUIPMENTS. READY FOR SHIPMENT.

Heidelberg SORD


-Single colour size 64x91,5 cms. -Year 1973, 86 mil. copies -Chromed impression cylinder, Water dampening -Manuals, tools and all accessories

Punches Heidelberg Cylinder KS


year 196? size 38 x 52 cm inking rolles used for die-cutting

Color Lid Printer POLYTYPE DDM 160/ 8


High-Performance Lid Printing System with automation for 1 man- operation. Automatic Infeed Conveyor to Feed Vertical Lid Stacks in-feed robot from stack reservoir to Denester Universal Screw Denester ARCOTEC Gas pre-treatment with pre-adjusted, automatically controlled gas-air mixture. Main 8-Color Print Unit Anti-ghosting inking units with fast removable, leak free ink fountains. Automatic cleaning of system rollers. Printing plate cylinder with quick locking device and micro-setting of the register for a fast reproduction. Cooling system for Fountain Rolls and 2 x oscillating rollers. No lid–no ink and no lid– no print system SIEMENS S7 PLC Controls Siemens SIMATIC PANEL OCP with Color Display. UVITERNO DBT 5545/ 1 UV-Tunnel, with 3 step switch (2/ 4/ 5.5 kW) * Real Time Camera with Display & Controls to recognize & automatically blow off faulty Printed Lids Horizontal lid re-stacker equipped with servo motor, exact lid counting and multi-stack delivery Conveyor. Data storage memory. Technical Data: Round lids: Min./max. rim diameter: 80 –180 mm Polygonal/ Rectangular lids: Min. rim dimension : 50 x 50 Max. rim dimension : 180 x 180 mm Min./max. lid height: 5/ 25 mm Max. printing speed up to (lids/h) : 30,000/ hr

HEIDELBERG SM 52-4P3 +


Alcolor Dampening Perfecting 2/2 CP Tronic, CPC 1.04 Autoplate All automatic washers rollers, cylinders and blankets Plus version Washers, rollers, Inkwell has been changed in the last past months Machine can be seen in production

Veneering presses ITALPRESSE XL-8


Code: 0361 Brand: ITALPRESSE Model: XL-8 - CE Standard Hot press with diathermic oil , with soli steel platens and oil boiler - CE Standard - Year 2008 Technical data: Solid steel platens dimensions mm 3200 x 1600 Thrust tonn 160 Opening mm 400 N° 8 pistons Pistons diameter mm 85 Oil Boiler 120 degrees Digital press timer for automatic opening Digital temperature setting and reading . working pressure Daily /weekly timer Exclusion of left cylinders Boiler power more than 18 Kw with selector for partialisation of 50% power Platens covered with Mylar Overall dimensions : mm 4000 x 2100 x 2320 h

Komori L 420


-Four colours STRAIGHT machine max size 37x52 cms. -Year 2008, Only 17 mil. impressions -Komorimatic continuous alcohol dampening with refrigerated recirculation system with alcohol metering -Komori Plate Changer: Semi-automatic plate changing -Densitometer PDC-lite: Scanning density control system -PQC control system- Control panel with touch screen built on delivery: ink zones, all registers and dampening remote controls, cocking -All automatic washers, Double size diameter of impression and transfer cylinders -All chromed cylinders: plate, blanket and impression -Powder sprayer, Max speed 13.000 sh/hour -Stream feeder with low pile delivery -Envelope feeder -All manuals, electric diagrams, tools and accessories

SANFOR CIBITEX SANFORISER


CIBITEX SANFOR, 2.000 MM WORKING WIDTH. YEAR 1986 - HIGH ENTRANCE WITH STEAMING DRUM - SHRINKING UNIT, RUBBER BELT WIDTH 2.100 MM (CYLINDER WIDTH 2.200 MM) - PALMER FOR FIXATION, DIAMETER 2.000 MM, FELT WIDTH 2.250 (CYLINDER WIDTH 2.400 MM) - EXIT BY A-FRAME BATCHER SPARES INCLUDED WITH THE MACHINE: RUBBER BELT, BLANKET FOR THE PALMER, CONVEYOR BELT FOR RELAXATION RUBBER BELT GRINDING DEVICE

Vimercati Cesoia marca Fermo Riboldi


Workshop machinery For sale exclusively on next 7 June 2018 at 10:30 at our offices in Bergamo Goods stored at Bollate (MI) For full catalog and vision contact us at 0307751645 and make an appointment Machinery and equipment including: -press brake brand Vimercati -Cutter brand Firm Riboldi -semiautomatic Bandsaw brand white mod. 280sa -wire welder MIG Weld Gem brand complete with # 1 cylinder of mixture and # 1 copper coil -drill press brand Comi full Machines drill bit set -Euromac Notcher brand -200 liters -Workbench in iron, one with grinding wheel and tool Panel -Cantilever €7,570.00

Glass Cylinder Stirring Apparatus with Lifting Dev


Glass cylinder mixing vessel 50l - mobile VA tubular frame. Mixing motor speed: 0-600/min, power: 0.55kW, operational temperature: -10°C to 180°C, operational pressure: -1 to 0.5bar, impeller agitator enamel, VA baffle with temperature sensor, display, spray ball, glass bottom valve: DN 25 with VA quick coupling, stainless steel tripod with swivel castors, lifting device, CE switch 16A, motor protective switch.

Frame presses VILMAR 580 x 350


Code: 0358 Brand: VILMAR Model: 580 x 350 Hydraulic press for mouldings / frames Worktable mm 580 x 350 N° 3 cylinders diameter mm 100 each Platens electrically heated with resistances Opening with electric platens mm 250 Opening without electric platens mm 430 Thrust 100 ton Hydraulic power Overall dimensions : mm 1200 x 1100 x 1850 h

MILLING MACHINE ZONCO NEWCOM 600 BIG


ZONCO MILLING MACHINE TYPE NEWCOM 600 BIG, YEAR 1987 WITH 4 CHANNELS, WOODEN CYLINDERS AND 1 FULLING IN STAINLESS STEEL 3 M

Water Jet Cutting Machines Bystronic Byjet 3015


Overhauled machine Hydraulic pump Overhauled Scraper conveyor New Bystronic laser safety lightscreen New MMC computer + remote 2 spare watercylinders available Manufacturer||Bystronic Model||Byjet 3015 Year of Manufacturing|| 2004 Serial Numbe ...

Punching Machines GEKA Hydracrop 100S


Punching machine shear. 2 cylinders. Two simoultaneous work stations. Five work stations. Punching power: 100Tn

Heidelberg SM 74-4-H


Alcolor, CP2000, Autoplate, automatic washing devices for inking rollers, blankets and impression cylinders, ink unit temperature control, Technotrans CombiStar, AirStar, ScrollStar, high-pile delivery, Grafix Alphatronic 200

Weft Straightener BIANCO TRAMATEX SP04


BIANCO WEFT STRAIGHTENER MODEL TRAMATEX SP04. YEAR 2002 ENTRANCE WITH TENSION BARS AND BIANCO DOGAL SPREADER CLEANING BOX WITH BRUSH CYLINDERS AND DUST COLLECTOR BIANCO PIN WHEEL WEFT STRAIGHTENER WITH SIEMENS TOUCH SCREEN PROGRAMMER

Weft Straightener BIANCO TRAMATEX


BIANCO WEFT STRAIGHTENER MODEL TRAMATEX SP04. YEAR 1995 ENTRANCE WITH TENSION BARS AND BIANCO DOGAL SPREADER CLEANING BOX WITH BRUSH CYLINDERS AND DUST COLLECTOR BIANCO PIN WHEEL WEFT STRAIGHTENER

MAN Power Plant 30 MW Diesel MAN 3 x 12V48/60 500 rpm, 50 Hz, 11 kV, 3x10 MW


Power Plant 30 MW with MAN 3 x 12V48/60 HFO Diesel Generators Complete good condition power plant with three identical diesel generators with MAN B&W 12 cylinder 500 rpm HFO engines and Siemens alternators each generating 10 MW / 11 kV / 50 Hz. Th ...

Glue presses POLZER GERMANY TRK


Windmill company POLZER - clamping with pneumatic actuators with a diameter of 100 mm - 8 shelves - maximum dimension of glued panels - 2250 mm x 1150 mm x 70 mm - 5 vertical cylinders + 5 horizontal cylinders per shelf - manual actuator control of m ...

Komori GL 440 H+C


Komorimatic with Technotrans Alpha C, APC, PQC with PDCS II, AMR, KHS-AI, ink temperature control, Baldwin IR dryer, anilox coater Harris&Bruno, all washing devices, Grafix Megatronic-S-HEP, Skeleton transfer cylinders

manroland Practica PRZ 00


44 Mio Impression MABEG stream feeder Streamdelivery with suction feeder Rolandmatic Dampening with cooling unit sheet decurler photoelectronic sheet detector Powder unit Weko T66C Programmable preset counter enhanced impression cylinder Perfe ...

roto offset MM progress


Grapha Müller Progress 1986, 4 color wet offset with turnbars between unit 1 & 2 and 2 & 3. Process unit with filehole tools, formaliner tools (Schober) double crossperf cylinders. Folder for 4” , 6” , 8” , 8 1/2” and 12”. 50” rewinder. Central  ...

Komori Lithrone L 420


ref. 417 Komori Lithrone L 420 format 37,5x52 cm, year 2005, 19 mio. imp. PQC-S remote control of ink and register (diagonal, circumferential, lateral), Komori Plate Changer, Komorimatic, double size of impression and transfer cylinders, automatic ink u ...

Washing Range Woven CIMI LAVANOVA 01


CAR-WASH CIMI MODEL LAVANOVA 01. FOR THE FLAT FABRIC AND YARN. WIDE CYLINDERS 2.000 MM. YEAR 1994 COMPOUND: -INPUT HIGH WITH STRETCHERS CORINO -4 DOUBLE PASSAGE WASHING TANKS -DRYING OF 8 BELLS TOWER -OUTPUT FOLDER

Stenter frames BRUCKNER


RAME BRUCKNER FOR TISSUE TO THE FLAT, WIDE CYLINDERS 2.000 MM. YEAR 1999 ENTRY WITH SUPERCHARGING AND BOX OF VAPORIZED HORIZONTAL CHAIN OF FORCEPS AND NEEDLES (ONLY INSTALLED CLAMPS) 12 FIELDS HEATED GAS BURNERS ECLIPSE EXIT J MOLLUSK, INSPECTION TA ...

Yarn dyeing machines MCS


JIGGER MCS HT, CYLINDERS WIDTH 3,200 MM, AÑO1989 HYDRAULIC DRIVE PROGRAMMER TERMOLELTTRONICA CT-401

Roland 202 TOB


-Two colours straight machine max paper size 52x72 cms. -Year 1995, 40 mil. copies -Rolandmatic dampening, quick clamps -Four bars grippers, Chromed cylinder, Powder spray -Plate punch, manuals and all accessories -Available immediately

Generators Man and Hyundai 2,7 MW Biomass power plant


Vegetable oil plant for sale private treaty. For info and appointment to view please contact us at 030725026 technical data:-Man engines, type: type 27/38, from 2.7 MW, 750 rpm, 9 cylinders-alternator Hyundai, from 3,300 kVA, three-phase, 50 Hz, 400 V-c ...

HEIDELBERG GTO(PM)52-2


Varn Kompac dampening / Quick Action plate clamps / Chroomed plate cylinders/ Segmented inking knives / Electronic and mechanical double sheet control / Small format device / Version plus with numbering unit, Perforating unit and Cross perforating device ...

MAN Power Plant 30 MW Diesel MAN 3 x 12V48/60 500 rpm, 50 Hz, 11 kV, 3x10 MW


Power Plant 30 MW with MAN 3 x 12V48/60 HFO Diesel Generators Complete good condition power plant with three identical diesel generators with MAN B&W 12 cylinder 500 rpm HFO engines and Siemens alternators each generating 10 MW / 11 kV / 50 Hz. Th ...

Komori S 228


KOMORI S 228(52 x 72cm), Age c.1989, serial no.114, circa 72 million, Komorimatic dampening, Toko powder spray, Royse refrigeration with alcomiser, Steel plate in feeder, Quick action plate clamps, Chrome impression cylinders.

Heidelberg SORS


-Single colour Sors max paper size 72x102 cms. -Serial no. 529--- Year 1989 -ALCOLOR dampening with Baldwin refrigeration system -68 mil. original impressions -Chromed cylinders, plate punch,all acccessories, tools, keys -Spare rollers, all documenta ...

LAMPERTI


Brand: LAMPERTI Year: 1998 Table Width: 2400 Conduction Type: 1 Prepared for knitwear WITH TWO DRUMS, 24 24 CYLINDERS

Raising machines LAMPERTI


Brand: LAMPERTI Year: 1998 Table width: 3060 Number of cylinders: 36

MAN Power Plant 30 MW Diesel MAN 3 x 12V48/60 500 rpm, 50 Hz, 11 kV, 3x10 MW


Power Plant 30 MW with MAN 3 x 12V48/60 HFO Diesel Generators Complete good condition power plant with three identical diesel generators with MAN B&W 12 cylinder 500 rpm HFO engines and Siemens alternators each generating 10 MW / 11 kV / 50 Hz. Th ...

Further processing machines Heidelberg SB Cylinder


Serial number 21177 Size 540 x 770mm Converted to cutting and creasing Front suction feeder Left and right sidelays Spare delivery trollies Sword style delivery

Heidelberg SB Cylinder


1963 Heidelberg SB converted cutting and creasing cylinder Size 540 x 740mm Fully rebuilt by Senior Graphics – Zenith rebuild programme With: Full electric replacement with inverter drives Single sheet feeder Pre loader Suction feed Right and lef ...

Hydraulic Deep drawing press HURSAN DCP 77/650


(production of cylinders for fire extinguishers) Power in tons 150 T Table 1400 x 1200 mm Light 1200 mm Ram stroke 700 mm Plate capacity 50 tons Plate stroke 400 mm Working speed 85 mm/sec

Horizontal Broaching machine STANKO 7A545


Horizontal Broaching machine STANKO 7A545 Nominal pulling force 63 tons Stroke of the working cylinder rod 2000 mm Speed of working stroke 1-7 m/min Feeding speed 11,2 m/min Withdrawal speed 18,8 m/min Speed regulation of the main motion is stepless ...

Ryobi 522 HX


-Two colours max paper size 37x52 cms. straight machine -Year 1997, Only 40 mil. impressions -Ryobimatic dampening, Quick clamps, Chromed cylinders -AAC Automatic Aqua Control with cooling unit, Automatic registers -Plate punch, all accessories, Im ...

KBA Rapida 75-4 SW2


ref. 421 KBA Rapida 75-4 SW2 format 52x74 cm, year 2009, 55 mio. imp., Ergotronic, ultrasonic and mechanical double sheet sensors, pneumatic side lay, suction belt on feeder table, semiautomatic plate change, doble size of impression cylinders, prepared ...

KBA RAPIDA 105 4 PWHA


ONLY 44 mine. IMPRESSION Ergotronic remote control preset semi automatic plate change Xqkibw3 alcohol dampening Baldwin cooling automatic roller, blanket and cylinder washer pumps into insonorized cabinet eltosh IR dryer non-stop delivery Weko  ...

Cylinder head Wichmann WX28 wx 28


Cylinder head for Wichmann WX 28 Low Nox Part no: 210201
Find used machinery dealers in your country