used CUMAT End Working Machines

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

AUTOMATIC DOUBLE END TENONER Type GABBIANI TMN 56 . second hand max.opening mm. 3100 min. opening mm.160 max. useful height mm.120 variable feed rate from 4 to 18,5 mt/min Equipped with 3+3 working units - 1+1 scoring unit . motor power HP 1.3 - 1+1 hogging / milling unit . motor power HP 5,5 - 1+1 milling unit . motors power HP 5,5 volt. 380/50

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

TECHNICAL DATA: Working width max mm: 3200 Working width min mm: 200 Passage height max mm: 180 Feedrate max m/min: 4 - 24

Double sided round end tenoner Balestrini mod. TTSA Description:  Double sided round end tenoner Balestrini mod. TTSA complete with loader 1. Automatic loader 2. Control panel 3. min / max working length 240/1200 mm 4. maximum tenon size 100x30 mm 5. Capacity: 1200 tenons/hour (600 pieces/hour) 6. Tool rotation 9,000 rpm 7. Total power 6,5 kW

Notching milling machine make GRAULE type AKF 2Year of construction 1986Technical specifications:Shaft diameter (cutter holder): 40 mmMilling cutter diameter max .: 250 mmMilling cutting width: 8.0 mmProfile height max .: 80 mmMilling width up to: 320 mmMilling depth: 72 mmDrive motor: 380 V, 2.2 kWWeight approx: 80 kgDimensions approx: 1100 x 800 x 600 mm- without baseusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.

I sell a double end profiler milling machine CELASCHI TSA 280D. Working width up to 2800mm Configuration left side / fix: 1 pcs. cutting unit 4.0 KW 1 + 1 pcs. milling units top + bottom / 4.0 + 4.0 KW 1 + 1 pcs. side milling units 4.9 + 4.9 KW Configuration right side / movable: 1 pcs. cutting unit 4.0 KW 1 + 1 pcs. milling units top + bottom / 4.0 + 4.0 KW 1 + 1 pcs. side milling units 4.9 + 4.9 KW Material pressure band with support from above. Continuous machine. Combined power 47KW NA1200 Positioner. Condition Very good. Available the same.

Cutter diameter: 250 mm notching width: 400 mm notching depth: 85 mm profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Hydropneumatic feed via foot switch Weight: approx. 350 kg

Graule AKF 6/250 - Year of construction 1999 - Engine brake - very good condition - technically tested and fully functional

Used notching milling machine Manufacturer: ROTOX Type: SAF 163 Ma. No. 163093 built 1978 Power 2,2 kW Item location: 58730 Fröndenberg/Ruhr The machine can be visited. We will be happy to send you more photos by e-mail. A forklift/crane for loading is available. We reserve the right to prior sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and leg ...

Double-sided tenoning machine Helma DRP 2000 Spindle rotation speed 6400 rpm Max blank length 2000 mm Feed speed 2 m/min Power 7 kW Weight 2750 kg Overall dimentions 4000x2000x2000 mm

SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI MOD. PRO 15 CNC - CE RULES - Working length mm. 170 – 2000 mm - Max tenon length 80 mm - Production: 1800 tenons/hour (900-1350 pieces/hour) - Tool rotation 11,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - With loader RBF 2 -Volt. 380/50 - S/N AO.118.88 - Year 2002

SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - Touch screen NC control - With CSF loader - Safety net - S/N 800 - CE rules (year 2004)

Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm

Year: 2015 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - cooling installation - cutter quick change system

Notching cutter Graule type AKF4/250 Specifications: • For window and door profiles made of aluminium and PVC • Milling spindle length (mm) 90 • Cutter diameter max. (mm) 250 • Milling depth up to (mm) 80 • Milling width (mm) 330

Double-end tenoner Gabbiani TDA N64 (Ref. No. 509-2642) 380 V 50 Hz 92 A 49 kW Weight approx. 5500 kg Year of construction: 1979 L x W x H: 4000 x 5500 x 1700 mm The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Machines for double-sided workpiece machining, especially for profiling the edges of the workpiece (postforming profiles, tongue-and-groove connections) for floor laminates and parquet) as well as for milling with large chip removal (slotted tenon connection on door and window profiles). Double-end tenon for longitudinal profiling Fabr. A. Costa 1. Vorritzer 1+1 2. Chipper (SAEGE) 1+1 3. Milling unit 1+1

Double slot and calibration machine 1000/1500 Herringbone parquet making machine Unique on the market, a set of machines (2 pieces) for the production of parquet - chevrons, Machines with high-precision machining

Cutter diameter: 250 mm Max. notch width: 250 mm Max. notching depth: 85 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Manual feed Weight: approx. 150 kg

Double-end tenoner Torwegge Working width 3000 mm per side: 2 x shredders swivel 3.7 kW at 50 Hz/5.5 kW at 100 Hz complete with converter Chain transport with cams

Offer 23291 Specifications: End processing machine for pipes with six-fold turret - tool holder Tube diameter 6 - 40 mm Max. forming length 100 mm Drive 400 V / 7.5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Code: 0351 Brand: CABO - ITALY Model: 3200 Automatic double end tenoner with tilting blade and scoring unit for panels, furniture, custom-made furniture, kitchens, composite materials, aluminium, acoustic panels Technical data Maximum cutting width mm 3200 Maximum cutting length mm 3200 Minimum distance between blades mm 300 Maximum cutting height mm 100 Maximum diameter of blades mm 300 Maximum diameter of scoring unit mm 200 Blades inclination 0-45° Blade motor power Hp 5 each Automatic feed carriage with variable speed Automatic opening between blades Scoring motor power Hp 1 each Pneumatic workpiece clamping Overall dimensions of assembled machine: mm 4200 x 4500 x 1200 h Overall dimensions for transport: mm 4500 x 300 x 1000 h + mm 4200 x 1100 x 1000 h Weight kg 1700

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.