901 offers

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-de DE
Seller: Pick Bäckereimaschinenhandel

It is a used Eberhardt spiral mixer typeMaximat 250 with 2 x bowls (extendible) for sale. The spiral mixer is dough for up to 250 kg. The machine has a stainless steel spiral and a digital control over the the kneading time of two speeds can be adjusted (automatic return). The machine has a dust cover. The machine head of the machine can be automatically and be lowered. The tank car is automatically locked. The spiral mixer is fully functional, runs quietly and is working perfectly. The machine was completely checked by a specialist workshop for Eberhardt machines and a service was performed. Price on request.

Category: 806: presses: sheetfed 6-color
New in: 2006
Price: 24.438 EU€
Location: Land-pl PL
Seller: Kennedy Machines

The machine is a combination of offset with digital printing. The entire process runs automatically - from setting up the plates to exposure, printing and cleaning - in one system. Thermal exposure of the plates takes place directly on the machine cylinders, it does not require chemical processing with a perfect fit. The machine works in anhydrous printing technology.

Category: 703: meat and fish processing machines
New in: used
Price: 7.400 €
Location: Land-de DE 91785 Pleinfeld / Ramsberg, Untere Dorfstr. 2
Seller: Lebensmitteltechnik Mayer

Filler Handtmann VF 50, vacuum Stuffer with calibration gear and accessories, just under 8,000 operating hours, vacuum pump oil change, dimension Lxwxh approx. 85x60x170cm, weight approx. 465 kg. Machine in good condition, works perfectly

Category: 1107: other energy machinery
New in: used
Price: VS request quote
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nDifferent versions on stock, Danfoss, invertors, frequency convertors, used \nlike e.g.. VLT 5000er Series, FCD-Series, VLT-Series and corresponding displays. \n \nWe usually have 50-80 pcs. on stock. Those have beed overhauled and can be reused without hesitation. \n(complete Danfoss-Series 5000 or FCD 307,311 and many more): \n \n200,00 / pcs Danfoss-FCD-Series up to incl. 1,5 kW \n230,00 / pcs Danfoss-5000er Serie up to incl. 1,5 kW \n220,00 / pcs Danfoss-VLT-Serie up to incl. 1,5 kW \n 35,00 / pcs corresponding Danfoss controls \n 96,00 / pcs protective ...

Category: 207: gluespreader machines
New in: 2002
Price: 27.900 €
Location: Land-de DE 40764 Langenfeld, Herzogstr. 10a
Seller: Tischlerei Bracht GbR

Edge banding machine IMA Klessmann, advantage 4612 with add and two scraping. Thank you, that you are interested in our offers. If you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail. As link machine Edge thickness approx. 0.4 12 mm Workpiece height approx. 10-50 mm, using the corner copying 16-40 mm Feed about 12m / min Noise guard pull-out workpiece support Dust extraction connector 2 x 120 mm, 2 x 100 mm IPC control Imatronic 121zur ease of use of the machine Up to 200 user programs can be stored Aggregates: Top pressure manual adjustment Infeed fence (manual adjustment with SIKO counter) Fuegefraesen  ...

Category: 401: filling machines
New in: 1997
Price: request quote
Location: Land-de DE
Seller: VBW Asset Trade Weihenstephan GmbH

accessories: gluing station Nordson Serie 3400

Category: 403: labeling machines
New in: used
Price: request quote
Location: Land-es ES 0 LORQUI (Murcia), C/CONDOMINA S/N
Seller: INTER-MAQUINAS AGUILAR S.L

Characteristics: KRONES labeller type Contiroll, with wrapping coil type ROLL. The machine works according to a simple but very effective principle that applies the labels directly in the containers, without using gluing palettes. This labeling process is economical and results in perfectly decorated packaging. The containers are precisely fixed between the centering tulip and the container holder. The different executions allow an exact labeling from the range of low to high yields. Speed: 12.000 b/h Format: 1liter

Category: 209: other wood working machines
New in: 1995
Price: used machinery auction RESALE 400 €
Location: Land-es ES Spain, 24252 San Pedro de Bercianos León
Seller: Surplex GmbH

Weight approx.: 1000 kg Dimensions (l x w x h) approx.: 2500 x 1700 x 1600 mm Description: Serial number 8934-02-95, Machine to perfectly fill the pore on flat surfaces of wood, fibreboard or similar with base coatings, Working width 1100 mm, Transport width 1100 mm, 2 independent rubberized coating rollers of 230 mm diameter and 1310 mm length, 1 smooth roller and 1 fluted roller, 1 double diaphragm feeding pump for both groups of rollers, For further information see photos

Category: 110: accessories for machine tools
New in: used
Price: request quote
Location: Land-de DE 59846 Sundern, Bruchhausen 21
Seller: Czech Industrie Service

3-axis DigitalanzeigeBaujahr: approx. 1991MaÃ?stab x: 1800 mmMaÃ?stab Y: were 600 mmMaÃ?stab Z: 430 mmAlle information to the best of our knowledge and existing documents created. Expressly reserved by mistake. The digital display was mounted on a Reckermann milling machine and ran perfectly until the dismantling. A visit to advance is by arrangement possible.

Category: 109: other metal working machines
New in: used
Price: used machinery auction RESALE 120 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 80 kg Dimensions (l x w x h) approx.: 2000 x 1100 x 1200 mm Description: 1 x diameter approx. 1050 mm, height of the cylindrical part approx. 510 mm, height of the conical part approx. 600 mm, with lateralsuction connection piece and cover (no longer fitting exactly, must be readjusted), 1 x diameter approx. 600 mm, height of the cylindrical part approx. 500 mm, height of the conical part approx. 500 mm, with cover and lateral suction connection piece

Category: 103: milling machines
New in: 1985
Price: request quote
Location: Land-de DE 57334 Bad Laasphe, Siegener Str. 133
Seller: RM-Industrieservice Lager und Büro

Tool room milling machine Manufacturer: Maho type: MH 600 E Year of construction: 1985 Control: Phillips 432 Working area: X/Y/z axis 600/400/400 mm Main drive: Three-phase brake motor, Variator Work spindle: tool holder; ISO 40, WZ voltage, Quill stroke: 80 mm Spindle speeds: 60-4000 / min directly programmable Feed range: In X/Y/Z = 0,1-1500 mm / min; smallest programmable feed value of 0, 1 mm / min. Rapid traverse: In Y/Z = 2, 5 m / min; in X-axis = 3 mm / min. Measuring system: Photoelectric Aufläsung in X/Y/Z axis = 0. 001mm Control: Screen contouring of CNC 432, with user guidance, program memory 45 kbyte, hand control panel Work table: Solid angle table: 10 ...

Category: 205: boring mills, machining centers
New in: 2006
Price: request quote
Location: Land-ch CH Switzerland, 1637 Charmey
Seller: Surplex GmbH

serial number: 4080 Weight approx.: 12000 kg control: Siemens/ CMS Typ CMS4080EL Dimensions (l x w x h) approx.: 19800 x 2500 x 2750 mm c-axis: ja / yes (+/- 270 Grad) setting measure approx (l x w x h): 9763 x 6102 x 3100 mm working length x-axis: 5600 mm working width y-axis: 1500 mm main spindle: 12/15 (HSK 63/F) kW tool changer: 48-fach/48-fold vacuum pump: 2x 245/300 cbm/h drilling head vertical x-axis: - piece drilling head vertical y-axis: - piece drilling head horizontal x-axis: - piece drilling head horizontal y-axis: - piece saw unit: - changing unit: - nein / no edge gluing unit: - travelling way X-axis: 5600 mm travelling way Y-axis: 2350 mm travelling way Z-axis: 720 mm path-fee ...

Category: 103: milling machines
New in: 1988
Price: 4.957 €
Location: Land-de DE Weilheim Teck
Seller: A-Z Maschinenwelt

Function was no longer checked. Ran but until recently. Technical data: Brand: Maho Type: MH 500 W Control: 432 Philipps X = 500 mm Y = 380 mm Z = 350 mm Recording ISO 40 Quill stroke 50 mm 63-4000 RPM Feeds directly programmable Feed in all axes Input in all axes Weight approx. 1800 kg L: 1650mm B: 2220 mm H: 1840 mm Year: 1988

Category: 109: other metal working machines
New in: 2015
Price: request quote
Location: Land-de DE Backnang
Seller: I-H&S GmbH

Technical Data item number: LM-1691 Manufacturer: TRUMPF Type: TruLaser 5030 fiber (L68) Year: 2015 Working area: 3000 x 1500 x 115 mm Laser rated output: 5000 Watt Control: Siemens Sinumerik 840 D Working hour: 23.119h / 9.912h Max. Sheet thick./St: 25 mm Max. Sheet thick./VA: 20 mm Max. Sheet thick./AI: 20 mm Max. Speed: 265 m/min Positioning accuracy: 0,10 mm Length: 8000 mm Width: 4800 mm Height: 2400 mm Weight: 12000 kg (Grundmaschine) \n \n \n Standard configuration \n \n Machine \n \n \n Closed machine frame \n Integrated cabinet \n Automatic pallet changer lengthwise installation \n Torque dri ...

Category: 703: meat and fish processing machines
New in: used
Price: request quote
Location: Land-pl PL 22-40 Zamosc, Hrubieszowska 265
Seller: BmgTrade

The SERVOTECH 200 meat cutter is intended for medium and large meat industry companies. The bowl of the device has a capacity of 200 liters, and its capacity is 100-140 kg / cycle. The whole is powered by a 57.25kW engine. SERVOTECH 200 has a six knife shaft that shreds the meat product perfectly. Thanks to the technology that has been installed, we can regulate the rotation speed of the bowl, and each knife shaft. The cutter has integrated loading and unloading of the raw material. The whole is controlled by means of an analog panel. Device designers built them from stainless and acid-resistant materials, also allowing easy access to components requiring maintenance. The manufacturer provid ...

Category: 703: meat and fish processing machines
New in: 1996
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Pickling machine, meat injector, injector, pickle injector, pökomat, Machine for injecting brine or flavors directly into the core of the product to be processed with needles -Body made of stainless steel -passage BxH 625 x 250 mm -Pressure bar a piece of needles -Needles Ø mm -Transport speed adjustable -Injection adjustable 14-28 strokes / min -Dimensions tank 1320/570 / H1420 mm -Dimensions of machine 2100/1080 / H1990 mm -Weight 2340 kg

Category: 703: meat and fish processing machines
New in: used
Price: request quote
Location: Land-pl PL 22-40 Zamosc, Hrubieszowska 265
Seller: BmgTrade

The NOWICKI MS-1-400 brine preparation station will perfectly fulfill its function while working on the factory. The device has a capacity of 400l and works with a power of 2.75 kW, which allows to achieve high efficiency. All elements are very easy to dismantle - so we can easily clean them to maintain the highest degree of hygiene The device is made entirely of stainless steel. Specification: Producer: Nowicki Model: MS-1-400 Capacity: 400l Power: 2.75 kW Power supply: 3x380V Weight: 180 kg Material: Stainless steel

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de DE Germany, 03222 Lübbenau
Seller: Surplex GmbH

Weight approx.: 2500 kg Dimensions (l x w x h) approx.: 3500 x 3100 x 1916 mm Description: Working range: adjustment of the cross support in the horizontal longitudinal axis (X-axis) 600 mm, in the vertical axis (Y-axis) 400 mm, adjustment of the headstock in the horizontal cross axis (Z-axis) 400 mm, work area: table clamping surface (vertical) 254 x 354 mm, working spindle: tool holder ISO 40, quill stroke in the vertical working spindle 80 mm, speeds and feeds: working spindle speeds directly programmable 80 to 4000 rpm, feeds directly programmable in the axes X, Y und Z 1 to 2000 mm/min, rapid traverse in the X-axis 4 m/min, in the Y-axis 3 m/min, in the Z-axis 5 m/min, CNC-control CNC 4 ...

Category: 703: meat and fish processing machines
New in: used
Price: request quote
Location: Land-pl PL 22-40 Zamosc, Hrubieszowska 265
Seller: BmgTrade

Mixer DADAUX model PMX60 is a reliable device designed for mixing stuffing in the meat industry. Dadaux is a stuffing / meat mixer which thanks to the proper construction of agitators and properly choiceed rotations allows you to evenly combine all ingredients of the stuffing and create the perfect mass. The device perfectly mixes both at full and partial loading. In addition to meat stuffing, it is suitable for mixed vegetables and salads, cheeses, sauces and other food products. Specification: Producer: DADUX Model: PMX60 Type: Mixer Total dimensions: - Height: 690 mm - Width: 600 mm - Depth: 890 Power supply: 400V, 230V, 50 Hz Power: 0.75 kW Bowl: rotati ...

Category: 105: saws
New in: used
Price: request quote
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 40 kg Dimensions (l x w x h) approx.: 300 x 800 x 750 mm Description: 832/5000 The assembly saw with elaborate series equipment and a large cutting range · For mitred cuts on the left up to 45 ° · For sawing steel, stainless steel and aluminum profiles · Cooling system directly on the saw blade · 24 V safety switch in the handle with restart protection · 38 kg Complete weight = easy to transport · Length stop, assembly tool Including saw blade HSS 250x2.0x32mm, 128 Z / ZT 6 + NL Optional: Machine support type 20505 (125, -EUR) Saw blade diameter 250 mm Cutting range at 90 degrees: about 85 mm Cutting range at 90 degrees: square 75 mm Cutting range at 90 degrees: flat 1 ...

Category: 102: lathes
New in: 1986
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

2 x lathe Traub TND 360 Traub1 is year 1986, Traub2 is built in 1985. The equipment of the machines is the same. Traub2 is in full production. Eeoctlm Traub1 has stopped with error 04 "RAM error" three days ago. Since we get the replacement lathe on Tuesday of next week, we have no longer bothered us, to repair the error. Traub2 should be replaced in 2-3 months.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Hammer mill (2x), Make Rotom Verkstaedter AB, Type 1-78, No 217/219, New 1987, Rotor size Dia. 600x800 mm, Fixed hammers (10x), Hammer width 30x45x45 mm, Motor 132 Kw, With switchgear, Floorspace 2.4x1.2 M, Total height 1.7 M, Extra Specifications Motor directly coupled to the rotor, roller feed for sheet feed, top of mill can be adapted to accept normal hopper, screen perforation 50x20 mm, dimensions control cabinet 0.8x0.4x2.2 M.SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-de DE 14641 Nauen/Berlin, Am Dorfanger 29
Seller: Kopack GmbH

Dissolver VMI RAYNERI C1200 good condition, directly from the production! 9KW

Category: 305: peripheral equipment (e.g. heating,cooling,drying)
New in: 2017
Price: request quote
Location: Lager NORTEC
Seller: NORTEC MASCHINENTECHNIK GMBH

Air volume: 3,0 - 10,0 m³/h temperature max.: 20 - 180 ° C material hopper volume: 12,0 l heating capacity: 1,05 kW control: SPS dimension L x W x H: 332 x 307 x 635 mm weight: 24 kg supply voltage: 230V/1Ph 50-60Hz painting: Standard dew point of the dry air: -70 ° C techn. data : according to the data sheet: : Small big dryer, particularly suitable for the treatment of technical polymers. Compact, practical and highly performing thanks to its zeolite double tower equipment. Also working with non-dried circuit compressed air. For mounting directly onto feeding zone of IMM. - 30 Liter insulated Hopper - Dew Point -55°C - Max. temperature 180°C - Anti-stre ...

Category: 1501: electric forklift trucks
New in: used
Price: 599 €
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

A used forklift battery charger for electric forklift / electric forklift truck / electric Ant / electric pallet truck Manufacturer: Jungheinrich model: Timetronic plus Output: 24 V input: 220 volts The charger is running perfectly! Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 305: peripheral equipment (e.g. heating,cooling,drying)
New in: 2017
Price: request quote
Location: Lager NORTEC
Seller: NORTEC MASCHINENTECHNIK GMBH

Air volume: 0,5-3,0 m³/h temperature max.: 20 - 180 ° C material hopper volume: 1,5 l heating capacity: 0,45 kW control: SPS dimension L x W x H: 230 x 213 x 478 mm weight: 7,6 kg supply voltage: 230V/1Ph 50-60Hz painting: Standard dew point of the dry air: -70 ° C techn. data : according to the data sheet: : Small big dryer, particularly suitable for the treatment of technical polymers. Compact, practical and highly performing thanks to its zeolite double tower equipment. Also working with non-dried circuit compressed air. For mounting directly onto feeding zone of IMM. - 30 Liter insulated Hopper - Dew Point -55°C - Max. temperature 180°C - Anti-stress  ...

Category: 201: saws
New in: 2000
Price: 49.000 €
Location: Land-de DE 82396 Pähl, Ammerseestr. 45
Seller: BROUWERS HBM

We offer subject to change for now: 1 year of HUNDEGGER joinery system used type K2, 2000, equipped with: task and feeding cross conveyor - machine works from left to right. ACF-strand with shaft extension Extension bracket with Einzieher Under table swivel compound miter saw Universal milling unit with dovetail cutters combined support for vertical working tools combined support for horizontally working tool 2 drills 1 additional vertical finger milling machine from below 1 slot machine above 1 marking device Fully automatic bar turning station Transport and positioning device for two-hand system electronic control Available now! System runs flawlessly and is completely ...

Category: 305: peripheral equipment (e.g. heating,cooling,drying)
New in: 2017
Price: request quote
Location: Lager NORTEC
Seller: NORTEC MASCHINENTECHNIK GMBH

Air volume: 2,0-6,0 m³/h temperature max.: 20 - 180 ° C material hopper volume: 4 l heating capacity: 0,45 kW control: SPS dimension L x W x H: 276 x 269 x 548 mm weight: 14,0 kg supply voltage: 230V/1Ph 50-60Hz painting: Standard dew point of the dry air: -70 ° C techn. data : according to the data sheet: : Small big dryer, particularly suitable for the treatment of technical polymers. Compact, practical and highly performing thanks to its zeolite double tower equipment. Also working with non-dried circuit compressed air. For mounting directly onto feeding zone of IMM. - 30 Liter insulated Hopper - Dew Point -55°C - Max. temperature 180°C - Anti-stress s ...

Category: 821: pre press: imagesetter and CTP
New in: 2003
Price: 12.500 €
Location: Land-it IT 13060 Biella, Via Lamarmora 11
Seller: MG Macchine Grafiche

-Thermal CTP Screen PlateRite PTR 8100 Year 2003 -49.500 plates done, External drum, 16 Laserdiodes -Min.size 450 x 370 mms., Max size 1.160x940 mms. -Speed: 8 Plates/ Hour at 2.400 dpi -Standard loading mode -Complete with RIP Harlequin, Dongle and Windows-PC -Perfectly maintained, Epson plotter included, in production

Category: 210: window production machines
New in: 2001
Price: request quote
Location: ab Standort
Seller: Gebr. Engelfried oHG

max. workpiece length: 4500 mm profile spindle: 1 Stück main drive: 12 kW HOMAG machining center GENIUS BOF 411/45 / PM ----------------------------------------------- Electronically controlled milling and drilling center for commission wise manufacture of furniture parts, solid wood parts and Devices, e.g. Windows, doors, stairs. With 1 main spindle. BRIEF DESCRIPTION OF THE BASIC EQUIPMENT: ? Console worktable K. ? HOMATIC control PC 83 with Windows operation. ? Main spindle 12 kW. ? Plate changer 18x. ? Ingenious interface for editing machining Aggregates with integrated pneumatic supply and drive C-axis. ? WoodWOP programming system. ? Laser positioning aid. TECHNICAL SPECIFICATIONS:  ...

Category: 409: other packaging machinery
New in: used
Price: 1.600 €
Location: Land-de DE 91785 Pleinfeld / Ramsberg, Untere Dorfstr. 2
Seller: Lebensmitteltechnik Mayer

Vacuum packaging machine KOMET K 300 Chamber size Lxwxh approx. 54x44x17cm, with 3 shelves, manual Vacuum pump oil and oil filter changed Dimensions Lxwxh approx. 75x52x100cm, weight approx. 111kg,. good used condition, works perfectly

Category: 903: machines for soil cultivation, sowing and harvesting
New in: 2013
Price: 118.000 EU?
Location: Land-pl PL
Seller: Kennedy Machines

The machine is in good technical condition with fine paint chips and traces of scratches on the whole machine. The exhaust manifold has traces of corrosion. Mechanical damage is not disclosed. Front tires: Michelin Mega BIB 800/65 R32 with approx. 20% wear (tread depth 40 mm). Rear tires: Alliance Flotation 331 600/55 R26 with approx. 30% wear (25 mm tread depth). The engine was started without reservations. The engine works correctly.

Category: 101: boring mills and machining centers
New in: 1999
Price: request quote
Location: Land-de DE 76661 Philippsburg, Bruchstücker 10
Seller: W&T EFRA

CNC machining center Heckert CWK 400 D Built in 1999 Tower tool magazine for 240 tools Pallet storage for 6 pallets + set-up station + work space (= 8 pallets) The machine is still up to the 03.01.2019 power. This is then professionally dismantled and stored, because the 10.01.2019 comes in a new machine and the space is needed. The machine is fully functional and works perfectly. A visit is possible at any time. Accessories: tool holder + tools and a range is given. Documentation, manuals, etc. are completely available. The machine to be disassembled into 3 parts. You see the ground plan in the Appendix. If you are interested we ask for a price quote. For questions  ...

Category: 206: presses
New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Working width: 6000 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 7500x2000x4120 mm weight: 5000 kg S + S frame press - fully automatic model Super -------------------------------------------------- -------------- CE version The only self-transforming high performance frame press fully automatic, where the woods no longer need to be pre-plugged. The width and height adjustment is achieved by inserting the workpieces directly in the pressing area, without loss of time, accomplished. The frame press machine of the superclass. Basic machine in strongest frame welded construction, from oversized, thick wall special profiles. Guideways for pressure beams and sliding sl ...

Category: 102: lathes
New in: 2003
Price: 115.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Machine type CNC lathe make NAKAMURA type Super NTJ built in 2003 control type CNC storage France country of origin Japan delivery time upon request of freight base from site technical details Turning diameter 190 mm turning length 700 mm control Fanuc 18 ITB speed 5,000 R/min rapid traverse rate: 16,40.6 (X, Y, Z) 15/11 KW main/counter spindle kW number tools 2 x 12 / 2 x 24 PCs Tool holder directly number of axles 9-controlled St. driven tools 12 per turret conveyors Mayfran eject of right kW clamping cylinder bar passage 82 duty hours 3000 h machine weight 13 tons of additional information Engine type: horizontal Counter spindle Clamping spindle: Hainbuch modular GR 65 + 3 ...

Category: 204: grinding machines
New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180 2x120 mm Double sided grinding machine Löwer DSM 2004 Double-sided four-band single-wood sanding machine for sanding Solid wood, e.g. Window wood etc. Highly stable top model with innovative details. Suitable for high Continuous load even at higher chip removal rates. - Successively arranged grinding units for rough grinding, fine grinding and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberised roller and shoe 3.Finish aggregate with fiber brush - Dir ...

Category: 1401: shelves
New in: used
Price: request quote
Location: Land-de DE 49835 Wietmarschen, Sachsstr. 6
Seller: BLT Lagertechnik

Pallet rack racks Dexion P90 Used in galvanized - technically correctly. Data: -H: 300 cm - 550 cm -T: 105-110 cm -Box load: 9000 kg at evenly distributed load. -- -- Large quantities available immediately from stock! -- -- Price is negotiable for larger quantities! You will receive an invoice with expelled VAT Accessories such as z.B ground anchor, starting-up protection, etc. can be purchased with us. Our recommendation: Tell us your requirements... We assist you with the realisation of your projects, from planning to the order to Assembly. Delivery upon request by us conveniently possible.

Category: 204: grinding machines
New in: used
Price: request quote
Location: ab Werk
Seller: Gebr. Engelfried oHG

Number of sanding units: 6 St. sanding width: 150 mm Sanding height max.: 120 mm Condition: new / unused: LÖWER Finish and intermediate grinding machine Leistomat LZ 6 For finishing (smoothing, de-fading and edge breaking) Or intermediate grinding of profiled window frames - Finish and intermediate grinding machine with six grinding- lamellar aggregates, 1 surface units at the top, 4 profile units with 1 surface units at the bottom 4 profile units with oblique arrangement on the top right, Lower right, upper left, lower left. - linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all grinding units Directly over the incomin ...

Category: 1401: shelves
New in: new
Price: request quote
Location: Land-de DE 86825 Bad Wörishofen
Seller: Vertriebsbüro Süd

Delivery time: 3-5 business days! -Delivery time: 3-5 business days! 17. (25.6 m.) Collar arm shelf stand, on one side, new, manufacturer: TopRegal, type: KR 3000, floor + 3 storage levels, arm length: 1,000 mm rack load inserted,: 3.000 kg, arm load: 500 kg, height of the shelving: 3,000 mm, incl. spacer, small parts, cross bracing and load labels, distance between uprights: 2 x 1. 500mm, RAL 5005 signal blue / 2004 pure Orange, item location: ex works. Material scope: 17. collar arm shelf stand, height: 3.00 m x depth: 1.00 m, RAL 5005 signal blue 51. arms, arm length: 1.00 m, RAL 2004 pure Orange 48 PCs. spacer, length: 1,50 m, RAL 5005 signal blue 32 x cross associations, small ...

Category: 206: presses
New in: used
Price: request quote
Location: ab Werk
Seller: Gebr. Engelfried oHG

Working width: 3500,4000,5000 mm Working height: 2620,3000 mm Number of cylinders: 6 St. Please note that we have a VORFÜHRPRESSE this model in our Have showroom in Oberkochen. Visits at any time by appointment possible. FRAME HYDRAULIC PRESS FOR WINDOWS AND DOORS CASOLIN MOD. EURO Frame press in extremely stable steel construction. The machine also allows the compression of already umfrästen sash and frame parts. Press to assemble any kind of windows and doors: - Either automatically or manually - With 2-axis CNC positioning - Precision 1/10 mm from ENCODER systems mounted on the spindles - Massverpressung: the mass can be easily entered manually or automatically be passed Possibility to  ...

Category: 1401: shelves
New in: new
Price: request quote
Location: Land-de DE 86825 Bad Wörishofen
Seller: Vertriebsbüro Süd

Delivery time: 3-5 business days! -Delivery time: 3-5 business days! 4 PCs. (4,3 m.) Collar arm shelf stand, beideitig, new, manufacturer: TopRegal, type: KR 3000, floor + 3 storage levels, arm's length: 1,000 mm, put rack load on each side,: 3.000 kg, arm load: 500 kg, height of the shelving: 3,000 mm, incl. spacer, small parts, cross bracing and load labels,. Distance between uprights: 2 x 1,500 / 1 x 1,000 mm, surface: hot-dip galvanized, item location: ex works. Material scope: 4. collar arm shelf stand, height: 3.00 m x depth: 1.00 / 1.00 m, hot-dip galvanized 24 PCs. arms, arm length: 1.00 m, hot-dip galvanized 6 PCs. spacer, length: 1,50 m, hot-dip galvanized 3 piece space ...

Category: 101: boring mills and machining centers
New in: new
Price: request quote
Location: Holland
Seller: GK Werkzeugmaschinen GmbH

x-travel:760 mm y-travel:820 mm z-travel:560 mm rotary table tiltable:A-Achse +30 ~ -120°, C-Achse: 360°, Min. Index-Inkrement 0.001° table-size:630 mm distance floor area / table surface:900 mm table load:600 kg Workpiece dimensions:max.Ø800x500 mm spindle speeds:20000 1/min. spindle drive:40 kw spindle taper:40 BBT milling feed range:1-10000 mm/min rapid traverse in x-y-z axis:48 m/min rapid traverse speed:Tisch (A-/C-Achse): 83/125 mm/min Tool changer:30 fach max. tool length:125 mm max. tool weight:8 kg max. tool diameter:80 mm weight of the machine ca.: t Machine size (LxWxH):2200x4000x3415 mm fully enclosed: : coolant system: rigid tapping: CE-design: high speed directl spindle mot ...

Category: 1401: shelves
New in: new
Price: request quote
Location: Land-de DE 86825 Bad Wörishofen, Vertriebsbüro Süd
Seller: Vertriebsbüro Süd

Delivery time: 3-5 business days! -Delivery time: 3-5 business days! 4 PCs. (4,3 m.) Collar arm shelf stand, beideitig, new, manufacturer: TopRegal, type: KR 3000, floor + 3 storage levels, arm's length: 1,000 mm, put rack load on each side,: 3.000 kg, arm load: 500 kg, height of the shelving: 3,000 mm, incl. spacer, small parts, cross bracing and load labels,. Distance between uprights: 2 x 1,500 / 1 x 1,000 mm, RAL 5005 signal blue / 2004 pure Orange, item location: ex works. Material scope: 4. collar arm shelf stand, height: 3.00 m x depth: 1.00 / 1.00 m, RAL 5005 signal blue 24 PCs. arms, arm length: 1.0 m, RAL 2004 pure Orange 6 PCs. spacer, length: 1,50 m, RAL 5005 signal blu ...

Category: 102: lathes
New in: new
Price: request quote
Location: Taiwan
Seller: GK Werkzeugmaschinen GmbH

:SS-27 | SS-31 | SS-35 turning diameter:700|790|890 mm turning length:700/1200/1700/2200/3200/4200/5200 mm control:Siemens 828D spindle nose:A2-11/A2-15/A2-20/A2-28/A2-32 spindle bore:153/230/255/318/360/410/535/610 mm spindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/min speed steps work spindle:4-stufig (automatisch schaltend) cross feed:0,001~250 mm/min feed in z-axis:0,001~400 mm/min rapid travel - longitudinal/face:8/10 m/min dia of ball screw:45 mm in X-Achse / 60 mm in Z-Achse tool turret:10- oder 12-fach tool taper:VDI 40/50 oder Schaftaufnahme tool holder -shaft diameter:32x32 mm diameter tailstock quill:160 mm :200 mm tailstock quill taper MT:5 spindle drive:3 ...

Category: 103: milling machines
New in: 1992
Price: request quote
Location: Land-de DE 47166 Duisburg, Maxstr. 26
Seller: IKTHA-GmbH

Round table with Auger Ã? 900 x 614 mm X trail (length) 800 mm Y way (vertical) 500 mm Z-WEG (transverse) 550 mm Spindle retainer for SK 40 Speeds of directly programmable 20 - 4000 RPM Feeds directly programmable 1-3000 mm / min rapid traverse in X - Y - (Z) 5 (6) m / min Rotary table Ã? 900 x 614 mm X-way (longitudinal) 800 mm Y-way (vertical) 500 mm Z-way (cross) 500 mm Spindle taper SK 40 Speed range directly programmable 20-4000 rpm Feed range directly programmable 1-3000 mm / min Rapid traverse X-Y-(Z) 6 (5) m / min Weight about 4200 kg

Category: 102: lathes
New in: new
Price: request quote
Location: Taiwan
Seller: GK Werkzeugmaschinen GmbH

:SA-35 | SA-40 | SA-45 turning diameter:890|1020|1145 mm turning length:700/1200/1700/2200/3200/4200/5200 mm control:Siemens 828D spindle nose:A2-11/A2-15/A2-20/A2-28/A2-32 spindle bore:153/230/255/318/360/410/535/610 mm spindle speeds:20-1200/16-700/13-600/14-450/12-400/10-350/8-300/4-220 1/min rapid travel - longitudinal/face:8/10 m/min cross feed:0,001~250 mm/min. feed in z-axis:0,001~400 mm/min dia of ball screw:50 mm in X-Achse / 80 mm in Z-Achse tool turret:10-/12-fach tool taper:VDI 40/50 oder Schaft tool holder -shaft diameter:32x32 mm diameter tailstock quill:235 mm :200 mm tailstock quill taper MT:6 spindle drive:37/45 (50/60 opt.) kW servo motor X-axis:4,5 (6 opt.) servo motor Z-a ...

Category: 1403: other storage equipment
New in: used
Price: 16 €
Location: Land-de DE 21698 Harsefeld, Elsterhorst 8
Seller: eth Ericus Transport u. Handelsges.mbH

We offer for sale: 1 piece mesh CAP, used (very good condition) Mass approx.: width: 1.170 x depth: 790 x height: 390 mm -Trays are stackable 6 x -On the front pockets -very good quality, robust, high capacity, high level of stability, good stackability and with sturdy frame -Stack baskets are suitable for sale by mass-produced articles and bulk goods â The modular construction principle ideally suited to fast and build a warehouse, offers ample scope for changing requirements: grow, transform and all without tools. -Suited perfectly also for storing fire wood; No falling out, even kindling or logs can be stored just fine and dry. -Due to the high wind permea ...

Category: 101: boring mills and machining centers
New in: new
Price: request quote
Location: Holland
Seller: GK Werkzeugmaschinen GmbH

x-travel:510 mm y-travel:400 mm z-travel:350 mm table-size:600x400 mm spindle speeds:12000 1/min. spindle drive:5,8 kw spindle taper:30 BBT rapid traverse in x-y-z axis:60 m/min Tool changer:16 fach weight of the machine ca.:2,8 t CNC controller:SIEMENS 828D (10.4\" LCD+SHOPMILL) rigid tapping: CE-design: high speed directl spindle motor:12000 1/min spindle coolant system: inner coolant:20 bar chip conveyor with chip bucket: fully enclosed: chip conveyor - auger:im Bett coolant system: : : air conditioner for cabinet: metrical version, 380V 50 Hz 3 phases: Brandnew machine with: 1. CONTROL SYSTEM SIEMENS 828D (10.4\" LCD+SHOPMILL) 2. WORKING TABLE SIZE: 600 X 400 MM 3. MAX. TABLE LOAD CAPA ...

Category: 102: lathes
New in: 1985
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Traub SYSTEM TX-7 control Built in 1985-1987 Power Chuck Travel x/Z 375/485 mm. Revolver 16 x, Spindle RPM to 5,000 rpm, Turning length 500 mm Rotation Ã? 375 mm,. Main drive KW 27,. Spindle bore 60 mm,. Rapid traverse x/Z 10/15 m,. Tailstock, Quill stroke 130 mm,. Tailstock travel 550 mm, Sell a well-preserved machine which works perfectly. There are tools, tool holders, wendeplaten

Category: 103: milling machines
New in: new
Price: request quote
Location: Taiwan
Seller: GK Werkzeugmaschinen GmbH

:SD(W)-24 | SD(W)-28 | SD(W)-32 x-travel:6000/8000/10000/12000/14000/16000/18000/20000/22000/24000/360 00 mm y-travel:3600|4200|4800|5400 mm z-travel:SD: 1100 mm (1400/1500) SD(W):1100 mm (1400/1500) mm distance between columns:3650I4250|4850|5450 mm w-axis:1500/2000 mm für SD(W) table width:2800|3400|4000|4600 mm table length:= X-Weg distance spindle nose and table:SD: 1080mm ~2180mm (1020mm-2420mm); SD(W): 800mm~800mm+Z+W spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:22/26 kW (mehr auf Anfrage) feed speeds:X/Y/Z/W: 10/10/10/1 m/min machine length:13,5m~43,5 m machine width:7,7|8,1|8,5|8,9 m Weight approx.:60t+3t/m|65t+3,3t/m|70t+3,5t/m|75t+3,8t/m auto ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)