used CORDIA Transmission drills

Rotational speed: 90-1450/min.

4 Head series drilling machine make CORDIA type S 18 IIFabr. -No: 630029/30/31/32Year of construction 1974Spindle mount: MK 2Drilling capacity: 18 mm6 speeds: 220 / 29ß / 440/720 / 950/1450 rpmDischarge: 300 mmgr. drilling depth: 120 mmColumn diameter: 110 mmDrive power: 1 hp (750 W)With- height adjustable table- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Offer 23259 Specifications: - Drilling capacity in steel ST 60 30 mm - Thread cutting device up to M 20 - Drilling spindle mount MK 3 - Drilling spindle stroke 160 mm - 9 drilling spindle speeds 98 - 1450 rpm - 3 feeds 0.1 , 0.2 , 0.3 mm/rev - Projection 300 mm - Table with 2 T-slots 500 x 450 mm - max. distance table - drilling spindle 660 mm - max. distance between drill lockers and machined base plate 1600 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.3 kW - Space requirement approx. W 600 x H 2100 x D 850 mm - Weight approx. 400 kg - with: - Machine vice - Quick-action chuck - 10 pcs. HSS – Drill 8 – 20 mm

two-armed drill, rotary drill, magnetic drill -Recording: MK2 -Nominal consumption: 150 W -Connection: 230 volts -Transport case -Dimensions: 350/300/H100 mm -Weight: 5.5 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

Drill, drill press, pillar drill, pillar drill -Manufacturer: Cordia, column drilling machine type S 26 -Motor: 1000W -Speeds: 95 - 1450 rpm, 6 levels -Table size: 320 x 270 mm, travel 500 mm -Spindle mount: MK3 -Spindle stroke: 100 mm -Projection: 280 mm -Columns Ø: 120 mm -Accessories: including lighting and additional. attached vice, see photos -Dimensions: 700/760/H1950 mm -Weight: 325 kg

Bench grinder, bench grinder, pedestal grinder, pedestal grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1400 rpm -Grinding discs: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 720/520/H1210 mm -Weight: 207 kg

Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOTN-150 -Grinding wheel: max. Ø 150 x 25 x 20 mm -Motor power: 0.35 kW -Speed: 3000 rpm -Operating voltage: 380 volts -Dimensions: 410/200 / H1045 mm -Weight: 33 kg

Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1500 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 590/690/H1080 mm -Weight: 246 kg

Drill, drill press, pillar drill, pillar drill -Table size: 275 x 215 mm -Spindle mount: MK3 -Projection: 280 mm -Speeds: 200-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 100 mm -Translation via: Gears -Number: 1x drilling machines available -Price per piece -Dimensions: 360/600/H1945 mm -Weight: 230kg

Drill press, drill press, stand drill, pillar drill -with: clamping table and fixed machine vice -Table size: 275 x 325 mm -spindle taper: MK3 -Projection: 300 mm -Speeds: 90-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 125 mm -Translation via: gears -Number: 1x drilling machines available -Price: per piece -Dimensions: 770/660/H2060 mm -Weight: 284 kg

Double bench grinder, bench grinder, column grinder, column grinder -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 805/550/H1070 mm -Weight: 236 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 2.2 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 350 x 50 mm -Operating voltage: 380 volts -Dimensions: 760/490/H1140 mm -Weight: 238 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.75 kW -Speed: 3000 rpm -Max. Grinding wheels: Ø 200 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/280/H1230 mm -Weight: 116 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 730/400/H1075 mm -Weight: 156 kg

bore capacity in steel (diameter): 30 mm throat: 300 mm bore stroke: 120 mm table surface area: 420 x 370 mm spindle taper: MK 3 spindle turning speed range: 45 - 1450 U/min threading: bis / up to M 20 total power requirement: 2,2 kW weight of the machine ca.: 400 kg dimensions of machine L x W x H: 0,75 x 0,60 x 2,07 m - with thread cutting attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column drilling machine CORDIA type HS 30 VG Masch. No. 303.081.118 Year of manufacture approx. 1980 Drilling capacity 30 mm Spindle holder MK 3 - short quill projection 300 mm Pinol stroke 160 mm Table size 500 x 450 mm Column diameter 125 mm Spindle speed 38-1450 rpm. 12 stages Feed 0.1 - 0.2 - 0.25 mm/rev Motor power 1.5 / 1.7 / 2.3 kW Mains connection 380 volts, 50 Hz - pole-switchable main motor with 3 speeds - 4 gear stages • Tapping device • Table height adjustment via hand crank • Clamping surface at the machine base Space required: L x W x H: 700 x 550 x 2100 mm , weight: 390 kg , good condition; used

bore capacity in steel (diameter): 32.0 mm bore capacity in cast iron: 38.0 mm morse taper: 3 MK turning speeds: 98.0 - 1450 U/min bore stroke: 160 mm table-size: 450 x 500 mm throat: 300 mm column diameter: Ø 120 mm feed: 0.1 / 0.2 / 0.25 mm/U thread: M 24 total power requirement: 1.4 / 1.6 / 2.2 kW weight of the machine ca.: 356 kg. range L-W-H: 505 x 690 x 2080 mm ** from a maintenance workshop - good condition (!!) Furnishing : - robust gear drill - pole-changing motor (1.4 / 1.6 / 2.2 KW) - automatic spindle feed (0.1 / 0.2 / 0.25 mm/U) - R/L run of the work spindle - Height-adjustable work table with T-slots, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Coolant system (retrofitted) - Connection cable + plug - User manual (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9103758 The data for this ...

BORING MACHINE Good condition Table dimensions 1300 x 1100 mm X axis 3100 mm Y axis 2000 mm Z axis 2200 mm W axis (bore tube) 600 mm Axis B (rotary table) continuous Horizontal spindle Tool change 30 seats Spindle revolutions 20 - 3000 rpm Spindle power 27 Kw Spindle cone ISO 50

Technical data of the used Skoda WA 200 moving column boring machine: X mast stroke: 13170 mm Vertical travel head Y: 4160 mm Axial stroke head or steerer W: 1600 mm Spindle axial stroke Z: 2000 mm Total axial stroke head + spindle: 2000 mm Spindle diameter: 200 mm Spindle cone: ISO 120 Spindle motor: 75 Kw Weight: 95000 kg Voltage: 380 Volt

Transmission oil cooler (recon) various

Linck insertups up to 250 kW pulley d1 = 1100 x 220 mm puller disc d2 = 700 x 230 mm shaft diameter: 90 mm, 3 standing bearings SKF; good

Completely overhauled gearbox in Exchange.

new, unused Right Angle Shaft Double Stage Reduction Horizontal rotating NE23BRN4 N (reducer with series N compact housing solid shaft) E (Size E) 2 (Double Stage Reduction) 3 (with right angle horizontal shafts) BRN (indicates the assembly arrangement shaft arrangement) 4 (nominal ratio) 71 kW n1 750 u/min n2 187,5 u/min

TWIN DISC MG514 marine transmission was built in Belgium. The device working with high- or medium-speed diesel engines used in, for example, tugs or ferries, optimises the control of engine power to increase overall cost-effectiveness, productivity and boat performance. The TWIN DISC MG-514 transmission operates at a rotational speed of 1800 rpm with a ratio of 2.00:1 and has 360 HP of power. The machine comes from an engine in very good condition with which it has worked for a small amount of time. The offered device is fully complete. The total weight of the machine is 525 kg. Technical data of the TWIN DISC MG514 transmission - ratio: 2.00:1 - power: 360 HP - maximum rotational speed: 1800 rpm - oil capacity: 23 l - minimum oil pressure while cruising: 13 bar - overall dimensions (L x W x H): 80 x 80 x 80 cm - total weight of MG514 machine: 525 kg