CONDIT all categories

Muller Martini Presto A90 Stitching Line Year: 2012 Working Hour: 3218 MM 1550 Stitching Unit 1x MM 1528 Cover Feeder 6x MM 1551 Feeder Three Knife Trimmer 4 x HK75Q Stitching Head 2 x HKOeQ6/8 Loop Stitching Head MM 1564 Belt Delivery 1x Compressor Max. Speed: 9000 cyc/ph Max size: 365mm x 315mm Min size: 105mm x 115mm Like New Condition Located in Turkey Available immediately

electrical power: 4 KW / 380 V / 50 cycles\r\n for steamer and heating\r\ndimension: l/d 285 cm, w 175 cm, h 215 cm\r\n 5 qm, 10 cbm

Man Roland 704 3B P Year: 2003 Impression: 197 Million 2+2 / 4-0 Perfector CCI Remote Control Rolandmatic Dampening Grapho Metronic FDM 17 Densitometer Semi Auto Plate Change All Washers (Roller-Blanket-Cylinder) Technotrans Beta D Recirculation Ink Temperature Control Becker Variair System Auto Size Adjustment in Feeder-Delivery Powder Removal System Grafix Cantronic 3000 Powder Spray Steel Plate in Feeder – Delivery Still in production Excellent Condition Available immediately Located in Turkey

5 rows, cap. max. 8.200 pcs./h, model 1989/1990,\r\ninclude \r\ndivider + rounder, type MUS - G 5, model 1998\r\n doughweightrange max. 150 g\r\n include moulding drum 74 -85 g\r\nintermediate proofer, type ZGL5/273/360,\r\n proofing time approx.10 min.\r\nstamping unit, type FST 5/50\r\nfinal proofer type SG 0,6/1010/950,\r\n proofing time approx.35 min.\r\nairconditioning\r\ndepositing device, width 600 mm, max. length 800 mm

Klotzky box Wallace cpl. made of stainless steel Very good condition still in operation Built in 2006 Machine is released March 2019 Price VB Machine can be removed and loaded

total size: width 580 mm , length 1940 mm \r\ncondition as it is\r\n

2008 Heidelberg Eurobind 1300 EVA Perfect Binder Serial number DEAO-000043 Eurotecnica Postpress Europack Pre Melt Unit Type PM G78488 Serial number G0804-209 4 clamps Dust extraction bag Operating hours 3280 Book count 594297 Mechanical speed: 1300 cycles/hour Book block format (height x width x thickness): max. 360mm x 300mm x 45mm min. 145mm x 120mm x 2mm Paper grammage (min.-max.): 60 gr/m2 - 170 gr/m2 Cover format (height x width): Max. 370mm x 680mm Min. 145mm x 242mm Cover grammage (min.-max.): 120 gr/m2 - 300 gr/m2 No compressor supplied. Was run from main air system Machine in excellent condition.

continuos workingwize\r\ncap. approx. 3.500 breads/h\r\naccessories: suction unit, conveyor (inside of \r\n the machine) for tins and bread \r\ncondition as it is

Accessories: 0.5l 1.0l 0.33l Very good condition still in operation Built in 1982 Machine is released March 2019 Price VB to make cheap Machine can be removed and loaded

running time variable 13 - 26 Min.\r\ninfeed low, outfeed high\r\n11 tiers, distance between the tiers approx. 200 mm\r\ngap between the tiers approx. 145 mm\r\nAshworth stainless steel belt, type: Omni - Grid 100\r\nbelt cleaning at the outfeed by presure air\r\nonly used approx. 4 h for trials \r\nmotors/gearbox are new or reconditioned, belt is new\r\n

Datz twin head single Packer Accessories: 20 x 0. 5l 12 x 1.0 l 24 x 0. 33l Very good condition still in operation Built in 1982 Machine is released March 2019 Price VB to make cheap Machine can be removed and loaded

Type: IK 2183, with uv - light, 230 V\r\n230 V; 2 x 15 Watt\r\ngood condition

BMS loading unloading palletizing Very good condition still in operation Sets of 12 x 1.0 l 20xd0. 5l 24 x 0. 33l box size 400 x 300 and 330 x 400 mm Built in 2005 Machine is released March 2019 Price VB Machine can be removed and loaded

airconditioning type GRD 09\r\nelectrical power: 9,1 KW / 380 V / 50 cycles\r\n for steamer and heating\r\ndimension: outside l/d 2000 mm, w 900 mm, h 2320 mm\r\n

BMS 3 Extractor head Very good condition still in operation Sets of 12 x 1.0 l 20xd0. 5l 24 x 0. 33l Built in 2006 Machine is released March 2019 Price VB Machine can be removed and loaded

type INFRA EE 520/180, model 09/1998\r\n5 decks, 1800 x 2000 mm\r\ncondition as it is, dismantled and loaded \r\n

<b>Properties:</b> Used Roller track converter of manufacturer's scarce Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Drive type: flat belt with motor Number: 4 PCs. 2 STK. with partial engine 2 PCs with engine under the conveyor <b>Converter</b> Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. <b>Technical data: Mass of the roller</b> Overall length: 720mm Total width: 1040 mm Width: 485 mm <b>Information on th ...

2 fans ensure a uniform climate\r\ncapacity sufficient for a proofing-chamber max. 12 m³\r\nsteamer 400 V, 3 KW\r\nheating 400 V, 1,5 KW\r\ntotal electrical power: 4,5 KW / 400 V /\r\nheating temp. + air moisture adjustable

Pallets Kammerpasteur BMS Very good condition still in operation Built in 1999 Machine is released March 2019 Price VB Machine can be removed and loaded

Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. Condition of the equipment good.

<b>Properties:</b> Used Roller track converter of manufacturer's scarce Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Drive type: flat belt with motor <b>Converter</b> Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. <b>Technical data: Mass of the roller</b> Overall length: 900mm Total width: 1030 mm Width: 485 mm <b>Information on the role</b> Clamping length: 415 mm Diameter approx: 50mm Material: Steel, ...

Round balers are designed for bales of grass or hay. The picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. Complete machine in good condition.

<b>Properties:</b> Condition: fully functional, with traces of use Manufacturer: Knapp Material: Steel Expertly disassembled and packed Condition: Good Extended clamping: 650 mm Clamp retracted: 600 mm Quantity: 10 PCs.

Reactor (1x), Make De Dietrich, Type AE-4000 L, No 62998, New 1999, Material glass lined (3009 U), Capacity 5374 Ltr, Vessel sizes dia. 1796x1520mm, Dished bottom, Dished top side, Manhole dia. 500mm, Top connections 5x dia. 150mm + 2x dia. 250mm, Outlet dia. 100mm, Working pressure vac/6 bar, Test pressure 9 bar, With jacket (677 Ltr), Working pressure vac/7 bar, Test pressure 12 bar, Max. temperature -25/+200 Degr. C., With propellor stirrer, Motor 11,0 KW, 230/400 Volt (Ex), Floorspace 2,4x2,4 MREACTORSREACTORS > REACTORS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to ...

Nitrogen tunnel 750 mm wide x 9000 mm long. Excelent condition. 3x 380 V

Grinder Classifier system, Make Mikropul gmbh, Type ACM-10, Material stainless steel, Grinding room size dia. 310mm, Fixed hammers, With grinding track, Inlet dia. 50mm, Feeding with rotating valve, Motor 7,5 KW 380 Volt , 1,1 KW 220/380 Volt, Mounted on frame, With switchgear, Floorspace ± 3,3 x 2,2 M, Total height 2,7 M, Weight ± 1600 KG, Extra Specifications 1x ventilator Van Tongeren kennemer type S395/3/4800 11KW, 400/690 Volt, 1x dosing screw dia. 225mm 0,37 KW, 220/380 Volt, 1x dustcollector Donaldson TDP675 230 Volt, 1x cyclonefilter :Van Tongeren kennemer type AC850/3.0, 1x cabinet. + OVERHAULED +SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth:  ...

Spiral mixer Make: KEMPER Model: SP 50 L (80 kg of dough) -light paint damage -excellent condition -with warranty

Colloid mill (1x), Make Brogli (Collovelox), No 2121, House material stainless steel, Rotor material stainless steel, Rotor sizes Dia.75-140mm, With hopper 15Ltr. Dia.400mm, Outlet Dia.25mm, Motor 5,5Kw.380/660Volt, With switch, Floorspace 0,8x0,7M, Total height 1,3MCOLLOID MILLSGRINDERS > COLLOID MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

<b>Properties:</b> Condition: fully functional, with traces of use Manufacturer: Knapp Material: Steel Expertly disassembled and packed Condition: Good Extended clamping: 650 mm Clamp retracted: 600 mm Quantity: 10 PCs.

Grinder Victory mill (1x), Make Hosokawa Micron, Type VP-4, No 420135, New 1973, Material stainless steel, Rotor size Dia. 630x400mm, Fixed hammers (60 flat hammers), Hammer width 400mm, With grinding platens, Inlet 400x400mm, Motor 55 KW, 380 Volt, Speed 2650 Rpm, Mounted on frame, Floorspace 2,2x1,8 M, Total height 1,8 MSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

<b>Properties:</b> Condition: fully functional, with traces of use Manufacturer: Knapp Material: Steel Expertly disassembled and packed Condition: Good Extended clamping: 450 mm Clamp retracted: 400 mm Quantity: 20 PCs.

Equipments: Top condition Cleaned

Thrust ground, crushers, shredders for chipboard, solid wood and the crushed pallets A video of the current machine can be sent on request. Hopper size, approx. 600 x 800 x 900 mm Rotor length 600 mm, rotor diameter 248 mm Low-speed Engine 18, 5kW PLC control system Sieve diameter top 20 mm, bottom 15 mm Rotor with 30 blades Sliding floor load-dependent control The knives are freshly turned and can be rotated up to six again Suction connector 160 mm Operating instructions CE mark Without shown black cord. Hacker was repainted V-belt replaced new machine feet Renewed oil and transmission fluid Dimensions approx. 1800 x 1100 x 1650 mm (Lxwxh). Weight approx. 1300kg.  ...

Wacker Neuson surface and ground heater. 700 m long hose for defrosting or heating surfaces up to 400 m2. The heater is designed to improve the weather conditions on construction sites and other locations where certain temperatures are required for operation.

New gas pressure regulator, Itron, DN50, RR16-50-54-12N-SL-IZN.1 Manufacturer: Itron Type: RR16-50-54-12N-SL-IZN.1 - DN50, PN16 - W DSO 35 mbar - 250 mbar Condition: The gas pressure regulator was purchased from a spare parts warehouse of a company and is still in its original packaging Dimensions: 43cm x 40cm x 85cm high Weight: 46 kg

Reactor (1x), Make Coti Srl Almé (Bergamo), No 0159, New 1996, Material stainless steel (304), Capacity 2350 Ltr, Vessel sizes dia. 1200x1680mm, Dished bottom, Dished top side, Top connections (5x), Outlet dia. 50mm, Working pressure vac/3 bar, Test pressure 4,5 bar, Half coil jacketed (94 Ltr), Working pressure 4 bar, Test pressure 6 bar, Max. temperature 210 Degr. C., With paddle stirrer make Mariotti & Pecini, Motor 1,5 KW, 220/380 Volt (Ex), Speed mixing shaft ± 56 Rpm, Floorspace 1,6x1,6 M, Total height 3,3 MREACTORSREACTORS > REACTORS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide  ...

New gas pressure regulator, Itron, DN80, RR16-80-82-12N-SL-IZN.1 Manufacturer: Itron Type: RR16-80-82-12N-SL-IZN.1 - DN80, PN16 - W DSO 35 mbar - 250 mbar Condition: The gas pressure regulator was purchased from a spare parts warehouse of a company and is still in its original packaging Dimensions: 43cm x 40cm x90cm high Weight: 63 kg

Grinder Cryogenic laboratory grinding line (1x), Make Hosokawa Alpine AG, Type 100-UPZ, No C-2118593, New 2011, Material stainless steel, Rotor size dia. 100mm, With grinding track, With hopper, Feeding with rotating valve Wirbelschnecken-Kühler D60x700, Motor mill 1,5 kW 400 Volt, With variable speed drive, Mounted on frame, With switchgear, Floorspace 2,0x2,0m, Total height 2,4m, Weight 690kgSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot C ...

We have a compltet Metyear.serious contact us,please. hanol plant for sale,set up in 2007,capacity 100,000t/y.Designed and manufactured by Chinese Company.Stopped less one year,good condition.serious contact us ,please

Grinder Cryogenic laboratory grinding line (1x), Pin disc mill /plate beater, Make Alpine Augsburg, Type 160-UPZ, No 5151.1, New 1988, Material stainless steel, Rotor size dia. 160 mm, Feeding with vibro feeder en Messer Griesheim Wirbelschnecken-Kühler D60x700, Motor mill 7,5/9,0 kW 380-420/440-480 Volt, Mounted on frame with Filter and Ventilator, With switchgear, Floorspace 2,5x1,5m, Total height 2,7m, Weight 1000kgSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visi ...

Max.gear diameter 1400mm Min.gear diameter 100mm Max.Module 30 Max.Face width 2850mm Distance Between Centre 4000mm Face Plate dia. 900mm Max.Helix.Angle 45Deg. Centre height above Bed 750mm P motor 24 Kw Machine weight 42 ton. Full complete Good working condition

Grinder Multi-wheel air classifier Mill, Make ALPINE A.G./ Henco & Co., Type ATP200 / 4ATP, No unknown, manufacturer tag is missing, New +/- 2006, Material mild steel inside ceramic-coated, Solid cone rotor 4x classifierwheel ceramic, Rotor size 4x dia. 200mm, fine 5µ - 120µ, Motor 4x 7,5 KW, Speed 4x 6000rpm, Mounted on frame, Floorspace 2,1x2,1 M, Total height 4,0 M, Weight 3900 KGSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for man ...

The machine is in good technical condition, after a prior agreement, the possibility of testing.

Grinder Multi-wheel air classifier mill, Make ALPINE A.G./ Henco & Co, Type ATP200 / 4ATP, No manufacturer tag is missing, New +/- 2006, Material mild steel inside ceramic-coated, Solid cone rotor 4x classifierwheel ceramic, Rotor size 4x dia. 200mm, fine 5µ - 120µ, Motor 4x 7,5 KW, Speed 4x 6000rpm, Mounted on frame, Floorspace 2,1x2,1 M, Total height 4,0 M, Weight 3900 KGSIZE REDUCTION MILLSGRINDERSGRINDERS > SIZE REDUCTION MILLSGRINDERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM f ...

POWDER COATING EQUIPMENT Parkerizing phosphate coating equipment Make:Wastec(Korean) Year:2014 2) Process Tank ? Load/Unload(#1):Size: 800(W) x 1,200(L) x 1,200(H)mm ? Alkali Cleaner Tank(#2) : Size: 800(W) x 1,200(L) x 1,200(H)mm 3) 2-step water rinse bath(#3,4): Size: 1,400(W) x 1,200(L) x 1,200(H)mm 4) Acid rinse bath(#5): Size: 750(W) x 1,200(L) x 1,200(H)mm 5) 2-step water rinse bath(#6,7): 1,400(W) x 1,200(L) x 1,200(H)mm 7) Surface condition bath(#8) :: 750(W) x 1,200(L) 1,200(H)mm 8) Coating bath(#9,10) : 900(W) x 1,200(L) x 1,200(H)mm 9) Hot water rinse(#11) : 750(W) x 1,200(L) x 1,200(H)mm 10) Dry Tank(#12) : Size(inside): 700(W) x 1,200(L) x 1,200(H)mm Siz ...

Grinder Multi-wheel air classifier Mill, Make ALPINE A.G./ Henco & Co, Type ATP200 / 4ATP, No unknown, manufacturer tag is missing, New +/- 2006, Material mild steel inside ceramic-coated, Solid cone rotor 4x classifierwheel ceramic, Rotor size 4x dia. 200mm, fine 5µ - 120µ, Motor 4x 7,5 KW, Speed 4x 6000rpm, Mounted on frame, Floorspace 2,1x2,1 M, Total height 4,0 M, Weight 3900 KGSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many ...

Heidelberg MO-S 1 color size 48 x 65 cm standard dampening stream feeder 43 million impressions plate puncher good condition in production available immediately

8,5 to., 3 double acting lines and 1 hydr quick coupler line, Powertilt with hydr. quick coupler SW 020, 3 buckets, A/C, nice and clean condition; Power [PS]: 68; Gross weight [kg]: 8400; Engine: Yanmar AU-4551 TYSB 03; Rear tyres remaining: 50; Front tyres remaining: 100

Sling table with solid Beechwood top Conveyor belt centered with cross design with hinged pull-out sheet Edition Stainless steel execution Table mobile Connection 400V, 16A-CEE plug Used equipment reconditioned with warranty

State: Machine in good condition and running. Movie available. X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.