british flag
Resale Logo

COLLET used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used store equipment  HERATEC Export u. Bet. GmbH  http://www.heratec.de 
banner logo
start page > keywords COLLET > results
420 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
126344413 1800

COLLETTE GRAL 300 Pro for sale
high shear vacuum mixer


double jacket stainless steel bowl volume 300 ltr.; pressure max. 2 bar; pneumatic valve
used machine
 
double jacket stainless steel bowl volume 300 ltr.; pressure max. 2 bar; pneumatic valve
 
used machinery auction RESALE 2,100 €  
  NL   request
126369799 104

REFORM LFU 6030 for sale
Surface Grinding Machine


grinding length:600 mmgrinding width:300 mmworkpiece height:255 mmTable dimensions:300x600 mmmax. table load:300 kgtable speed -stepless-:5-25 m/minrapid traverse cross:900 mm/minrapid traverse vertical:450 m/minautom. v ...
used machine
 
grinding length:600 mm
grinding width:300 mm
workpiece height:255 mm
Table dimensions:300x600 mm
max. table load:300 kg
table speed -stepless-:5-25 m/min
rapid traverse cross:900 mm/min
rapid traverse vertical:450 m/min
autom. vertical feed:0,001-0,999 mm
grinding wheel dimensions (ØxWxBore):355x38x127 mm
spindle speed:1450 U/min
spindle drive:5 PS
machine weight ab.:1700 kg
Overall size:2250x1400 mm
NC autom. vertical feed programmable AD5:
electromganet faceplate with directly pole dispart:300x600 mm
complete cooling system:
grinding wheel:
grinding wheel flange:2 Stück
:auf der Schleifspindel; manuell
levelling elements:
autom. vertical feed :
balancing mandrel:
:
hydraulic aggregat with cooling ventilator:
machine tools:
CE-design:
:
Metric, 400V 50Hz 3 Phase:
set of collets:

1. Optimized Structure - The major parts are manufactured from high quality cast iron combined with an outstanding structural design. Major parts are stress relieved to ensure maximum rigidity, stability and machining accuracy. 2. Precision Spindle Design - The spindle runs in a class P4 high precision angular contact bearing, assuring run-out accuracy in 2 µm. The cartridge-type spindle is completely sealed and lubricated for long working lifetime, providing high accuracy grinding and a long service life. 3. Ball bearing slideway - The saddle type M series employs ?AA? grade steel balls on longitudinal guide ways for easier operation and saving labor. 4. Turcite-B on Slideways - The X, Z axes slideways are coated with Turcite-B for stable movement and long term accuracy. 5. Heavy Duty Linear Guide Ways - The beam surface of double column type is equipped with two heavy duty linear guide ways with great span for extra smooth movement and high rigidity. 6. Precision Feed on Vertical-axis - The vertical axis of cantilever type and double column type, are equipped with high precision linear guide ways combined with high precision ball screw transmission, assuring outstanding feed accuracy and maximum stability. 7. M.P.G. handwheel - Except for the saddle type, the vertical feed are controlled by an M.P.G. handwheel instead of a conventional handwheel. Feed is driven by an AC servomotor for effortless operation and high accuracy. 8. Crisscross grinding function (option) - Crisscross feed speed is infinitely variable, a very wide range of cross feed can be obtained. This grinding method is invaluable for grinding thin workpiece and can increase the efficiency significantly. (M & H series can?t be installed)(This function is a standard function of the cantilever and double column series) 9. NC auto down feed system (AD5 type) (option) - Except for the M & H series, the AH, and AHR models are available to equip with an optional NC auto down feed system (AD5 type) to become 3 axes fully automated for greatly increasing operational convenience. (This function is a standard function of the cantilever and double column series) 10. NC auto parallel dressing & compensating system (option) - The optional NC auto parallel dressing & compensating system is available to equip with an optional NC auto down feed system (AD5 type), greatly increasing the grinding efficiency. 11. Variable Table Speed - The variable feed speed of the cantilever & double column type table is controlled by a proportional hydraulic valve, allowing for feed speed adjustment according to the workpiece type for increased convenience of operation. 12. Vertical Wheel Head (option) - Upon request, the double column type is available to equip with a vertical wheel head. It is suitable for grinding box slideways and dovetailed slideways.
2001
Price  
    request
126327272 102

Hahn&Kolb Tornomat 2 for sale
Turning Automatics


MAFUNGA - LATHE VALVE & KOLB TORNOMAT 2 - 04-99-005 Shipping time: immediately ID: 04-99-005 Manufacturer: Hahn & Kolb Type: Tornomat 2 MACHINE DATA Year: circa 1975 L x W x H: CA. 1800 x 1000 x 150 ...
used machine
 
MAFUNGA - LATHE VALVE &
KOLB TORNOMAT 2 - 04-99-005
Shipping time: immediately

ID: 04-99-005

Manufacturer: Hahn & Kolb
Type: Tornomat 2

MACHINE DATA
Year: circa 1975
L x W x H: CA. 1800 x 1000 x 1500 mm
Weight: 1300 kg

Very good condition

TECHNICAL DATA - MAFUNGA - LATHE
Workspace:
Hex: SW 3 - SW 36

Square: SW 3 - size 24

Maximum turning length: approx. 40 mm

Hydraulic feed: approx. 0 - 0.5 mm / Rev

Rapid traverse rate: approx. 3,7 m / min

Switching time: 2 seconds

Rotor speed: approx. 250 / 355 & 450 RPM

The quick drill spindle speed: approx. 2250 / 3200 & 4050 RPM

Power rotor: approx. 2,2 kW

Power hydraulics: CA. 1,5 kW

ACCESSORIES (SEE PICTURE)
â?¢ Various blade

â?¢ Complete machine documentation

â?¢ Various collets

â?¢ Various blade - inserts

â?¢ Various wrenches

â?¢ Various adapter sleeves

â?¢ Measuring device

Other accessories on request
Price and other specifications on request
1975
Price  
    request
126355165 102

DMG MORI Sprint 20-5 for sale
Turning Automatic Lathe - swiss lathe


spindle passage: 20 mmturning length: 60 mmControl: Fanuc 32i Main spindle:: Max. rpm: 10.000 min/-1power capacity - main spindel: 3,7 / 2,2 kWmax. Torque: 23,6 / 14 NmBar feed: 20 mmC-Axis: 0,1 °Subspindle:: Max. rpm ...
used machine
 
spindle passage: 20 mm
turning length: 60 mm
Control: Fanuc 32i
Main spindle::
Max. rpm: 10.000 min/-1
power capacity - main spindel: 3,7 / 2,2 kW
max. Torque: 23,6 / 14 Nm
Bar feed: 20 mm
C-Axis: 0,1 °
Subspindle::
Max. rpm: 10.000 min/-1
power capacity - Sub spindle: 2,2 / 1,5 kW
max. Torque: 7,0 / 4,8 Nm
Bar feed: 20 mm
C-Axis: 0,1 °
slide I::
fixed tool stations: 6 pos.
Frontal Machining: 6 pos.
Backside processing: 3 pos.
driven statition: 4 pos.
max. speed driven tool stations: 2 pos: 6.000 min/-1
power capacity driven tool-stations: 1,3 / 0,8 kW
max. Torque: 2,0 / 1,7 Nm
max. speed driven tool stations: 2 pos: 3.450 min/-1
power capacity driven tool-stations: 1,3 / 0,8 kW
max. Torque: 3,5 / 3,0 Nm
slide II::
Backside processing::
fixed tool stations: 2 pos.
driven statition: 2 pos.
max. speed driven tool stations: 6.000 min/-1
power capacity driven tool-stations: 1,2 / 1,0 kW
max. Torque: 2,5 / 2,0 Nm
axis stroke::
x-travel: 1: 325 / 2: 220 mm
y-travel: 1: 325 / - mm
z-travel: 1: 60 / 2: 170 mm
feeds::
rapid traverse ( X / Y / Z ): 32 m/min
Accelaration: 5 m/s²
total power requirement: - kW
weight of the machine ca.: 2,3 t
dimensions of the machine ca.: 2,5 x 2,0 x 2,0 m
Documents:
Coolantsystem:
parts catcher:
Subspindle:
Signal lamp - 4 colour:
bar feeder interface:
bar feeder: IEMCA Smart 320/32
Chip conveyor:
high pressure coolant: Müller 100bar
parts catcher:
hydraulic system:
collet chuck:
CNC - Bar Automatic Lathe Longitudinal
DMG MORI - Sprint 20/5

- Only ca. 1.100h Spindle-hrs.
- Motorized Backside-Machining
- 2 Cross Slides
- Main- and Subspindle
- Y-Axis on Slide I
- C-Axis on Mainspindle
- Tool-Drive
- Tool-Capture 12x12mm / Ø20mm - ESX/ER16
- bar-feeder IEMCA Smart 320/32
- High-Pressure-Coolant 100bar



This ad was created with MODUL MWS - the software solution of LogoTech.
2016
Price  
    request
126219639 102

WEILER Primus CNC for sale
CNC Turning Machines


Built in 1985 Control Siemens Tool turret Collet Chuck Tailstock
used machine
 
Built in 1985
Control Siemens
Tool turret
Collet Chuck
Tailstock
1985
Price  
    request
126339205 104

KELLENBERGER UR 175-600 for sale
Cylindrical Grinder


Weight approx.: 2800 kgDimensions (l x w x h) approx.: 2600 x 2000 x 1700 mmDescription: KELLENBERGER UR 175-600 Cylindrical Grinder - machine no.: 31.200.011 - operating voltage: 3 x 380 V, 50 Hz - with belt filter and ...
used machine
 
Weight approx.: 2800 kg
Dimensions (l x w x h) approx.: 2600 x 2000 x 1700 mm
Description: KELLENBERGER UR 175-600 Cylindrical Grinder
- machine no.: 31.200.011
- operating voltage: 3 x 380 V, 50 Hz
- with belt filter and set of collet chucks
1977
used machinery auction RESALE 3,000 €  
  DE   request
126204370 109

RIS-INGOLD Rismatic 154 G-12 for sale
Rotary Transfer Machines


Rotary transfer machine Manufacturer: Ris - in gold Type: Rismatic 154 G-12 Year of construction: 1985 Workpiece diameter mm: 7-13 Workpiece length mm: 200 working stroke mm: 100 Number of stations: 12 Station ...
used machine
 
Rotary transfer machine
Manufacturer: Ris - in gold
Type: Rismatic 154 G-12
Year of construction: 1985

Workpiece diameter mm: 7-13
Workpiece length mm: 200 working stroke mm: 100
Number of stations: 12

Station 1: Cut off saw unit
Station 2: Schlittenbohreinheit for drilling and turning
Station 3: empty
Station 4: horizontal milling unit
Station 5: empty
Station 6: horizontal milling unit
Station 7: Quill type drilling unit
Station 8: reverse unit
Station 9: Schlittenbohreinheit for drilling and turning
Station 10: hydraulic grooving unit
Station 11: Quill type drilling unit
Station 12 threaded drill unit horizontal

Feeder rods created by RIS 3 meter length
Collets: 173E

Machine condition and maintenance: very good!

Available: August / October 2018

1985
Price  
    request
126292856 102

TAKISAWA TAIWAN NEX-108Y for sale
CNC Turning- and Milling Center


turning diameter: max. 260 mmturning length: max. 444.5 mmcontrol: Fanuc F0iTD Manual Guideswing dia.: 480 mmstandard turning dia.: 244 mmMain spindle:: Turning spped range - main spindle: ~4.000 min/-1power capacity -  ...

 
turning diameter: max. 260 mm
turning length: max. 444.5 mm
control: Fanuc F0iTD Manual Guide
swing dia.: 480 mm
standard turning dia.: 244 mm
Main spindle::
Turning spped range - main spindle: ~4.000 min/-1
power capacity - main spindle: 11/7.5 kW
spindle head: JIS A2-6
spindle bore: 63 mm
bar material dia.: 52 mm
spindle bearing diameter: 100 mm
chucking diameter: 200 mm
Axis stroke::
x-axis: 195 mm
z-axis: 530 mm
y-axis: +/- 40 mm
Turret::
number of tool position: 12 pos.
Turning tool shank: 25 mm
Borind bar shank diameter: 40 mm
Milling tool shank diameter: 20 mm
Tool taper: Takisawa BMT
number of driven tools: 12 pos.
Spindle speed - driven tool stations: ~ 4.000 min/-1
power capacity driven tools: 5.5/3.7 kW
Max. Torque: 60 Nm
dia. of draw-in collets: ER 32
Tailstock::
tailstock adjustment: 435 mm
dia. of quill: 75 mm
quill stroke: 100 mm
taper of center: MT.5
feeds::
rapid traverse X-axis: 20 m/min
rapid traverse Z-axis: 24 m/min
rapid traverse Y-axis: 10 m/min
C-Axis::
c-axis: 0,001 °
total power requirement: 25 kVA
weight of the machine ca.: 4,5 t
dimensions of the machine ca.: 2,4 x 1,7 x 2,2 m
Documents:
Chip conveyor:
Coolantsystem:
interface bar feeder:
Three Jaw Chuck:
Tool setter:
Parts catcher:
X axis live tool holder: 1 pos.
Z axis live tool holder: 1 pos.
Boring bar tool holder: 6 pos.
Facecutting holder: 2 pos.
OD toolholder: 2 pos.
CNC Turning- and Milling Center

TAKISAWA TAIWAN NEX-108Y

Immediatley available Machine!

Kompakte Maschine mit angetr. Werkzeugen
C-Axis
Y-Axis +/-40mm



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
126192444 102

TRAUB TNX 65/80 for sale
CNC Turning Centers


CNC lathe TRAUB TNX 65-80 stock no. 1105-02432 category CNC lathe make TRAUB TNX 65-80 type built in 2006 State second-hand machine control CNC TRAUB TX 8 i storage HAGUENAU country of origin Germany delivery by arrangem ...
used machine
 
CNC lathe TRAUB TNX 65-80 stock no. 1105-02432 category CNC lathe make TRAUB TNX 65-80 type built in 2006 State second-hand machine control CNC TRAUB TX 8 i storage HAGUENAU country of origin Germany delivery by arrangement Frachtba SIS from site technical details of pole diameter 80 mm Chuck diameter 175 mm turning length 900 mm speed 5000 RPM indexing per C-axis, 0.001 ° degrees sub spindle Yes / yes Rod diameter 65 mm speed 4500 U/min indexing per C-axis, 0.001 ° degrees
Turret head (x-fold) 3 x 12 x VDI 30 driven tool stations 3 x 12 controller TRAUB TX 8 H hours coolant emulsion total power of 35 kW machine weight approx. 8 t dimensions approx. 3.8 x 2.25 x 2.5 m chip conveyor additional under current and v orführbereit Yes accessory tool holder 10 rigid, 5 piece / off parts conveyor powered description immediately available.
With 9 axes!
Accessories:
Y AXIS IN ALL 3 REVOLVER
Collet Chuck on AbgreifspindeL 1 X set VDI 30 holder CA-10 pieces
SHARE LOADING PALLET MAGAZINE WITH LOADING
INTEGRATED measuring SYSTEM traub tx cnc 8 I
STILL IN PRODUCTION
2006
Price  
    request
126199959 102

GILDEMEISTER CTX 410 V6 for sale
CNC Turning- and Milling Center


turning diameter: max. 505 mmturning length: 635 mmcontrol: iT Plus Heidenhain standard turning dia.: 250 mmgreates pass round over bed: 505 mmswing diameter max. over bed cover: 375 mmMain spindle:: turning speed range ...
used machine
 
turning diameter: max. 505 mm
turning length: 635 mm
control: iT Plus Heidenhain
standard turning dia.: 250 mm
greates pass round over bed: 505 mm
swing diameter max. over bed cover: 375 mm
Main spindle::
turning speed range - main spindle: 25 - 5.000 min/-1
power capacity - main spindel: 28 / 21 kW
max. Torque: 240 Nm
spindle bearing diameter: 130 mm
chuck diameter: - mm
max. bar capacity: 65 mm
spindle nose: 170h5
C-Axis: 0,001 °
Subspindle::
Spindle speed range subspindle: 31 - 6.000 min/-1
power capacity - Sub spindle: 16,2 / 12,6 kW
spindle bearing diameter: 90 mm
chuck diameter: 165 mm
max. bar capacity: 43 mm
spindle nose: 140h5
C-Axis: 0,001 °
turret::
number of toolpositions: 12 pos.
Number of driven toolspositions: 12 pos.
Spindle speed - driven tool stations: max. 4.500 min -1
max diameter of the vice bore: 16 mm
axis stroke::
x-axis: 150 mm
y-axis: 80 (+/-40) mm
z-axis: 650 mm
total power requirement: 64 kW
weight of the machine ca.: 5,8 t
dimensions of the machine ca.: 5,0 x 2,5 x 2,8 m
Documents:
Chip conveyor:
Subspindle:
C-axis:
Y-axis:
Tool drive mechanisum:
Turret: Sauter
hollow chuck unit: hydr. / max. 67mm
parts catcher: 65mm x 120mm
Coolantsystem: 8/20 bar
paper band filter:
bar feeder interface:
bar feeder: IRCO - ILS RBK 100/12
collet chuck: 65mm
Three Jaw Chuck: BHD 165/43
Signal lamp - 4 colour:
CNC Turning- and Millingcenter
GILDEMEISTER - CTX 410 V6

- incl. barfeeder
- WITHOUT Tools




This ad was created with MODUL MWS - the software solution of LogoTech.
2007
Price  
    request
126178137 102

I-60 ULTIMATE Quick TECH for sale
Turning-and Milling Center(double spindle)


13-axis ULTIMATE with pneumatic feeding - max 3m Hours in operation: 5250 Control system: Mitsubishi M700 Max spindle passage: 65 mm 21 driven tools Machine dimensions: 2900 x 1900 x 1900 mm Machine weigh ...
used machine
 
13-axis
ULTIMATE with pneumatic feeding - max 3m
Hours in operation: 5250
Control system: Mitsubishi M700
Max spindle passage: 65 mm
21 driven tools
Machine dimensions:
2900 x 1900 x 1900 mm
Machine weight: 4400 kg
Accessories:
Driven tools (ER-20 collets)
Collet chuck
Tool holder
Chip conveyor
Bar feeder
High pressure coolant pump
Floor coolant pump
Auto lubrication system
Manual
2016
Price  
    request
126138728 102

SCHAUBLIN 102 TO for sale
Lathe


Weight approx.: 400 kgDimensions (l x w x h) approx.: 2000 x 800 x 1550 mmDescription: Serial number 133278. Center height approx. 90 mm, bed length in front of chuck holder 640 mm, with cross and upper support, without  ...

 
Weight approx.: 400 kg
Dimensions (l x w x h) approx.: 2000 x 800 x 1550 mm
Description: Serial number 133278. Center height approx. 90 mm, bed length in front of chuck holder 640 mm, with cross and upper support, without tool holder and without clamping chuck, belt drive with separate motor, on robust machine table, wooden plate 2000 x 800 x 50 mm, drawer cabinet with 6 drawers without contents, with tailstock and a set of collets, see photos
 
used machinery auction RESALE 1,900 €  
  CH   request
126102153 102

DOOSAN Puma MX 2100 ST for sale
CNC Turning Centers


40 times tool-magazine, 2x Hainbuch SK65 collet-chucker, barloader LNS 552-565, yob 2010
used machine
 
40 times tool-magazine, 2x Hainbuch SK65 collet-chucker, barloader LNS 552-565, yob 2010
2009
Price  
    request
126138839 1900

Lot of Tools and Accessories for CNC


Weight approx.: 2 kgDimensions (l x w x h) approx.: 200 x 200 x 100 mmDescription: 4 drills for CNC, 1 helical milling cutter diameter 5 mm and cutting long 16 mm, 4 collets ER40 with diameters 25 mm - 16 mm - 2 units of ...

 
Weight approx.: 2 kg
Dimensions (l x w x h) approx.: 200 x 200 x 100 mm
Description: 4 drills for CNC, 1 helical milling cutter diameter 5 mm and cutting long 16 mm, 4 collets ER40 with diameters 25 mm - 16 mm - 2 units of 8 mm
 
used machinery auction RESALE 60 €  
  ES   request
126085926 103

DECKEL FP 3 for sale
Tool-Milling Machines


TOOL ROOM MILLING MACHINE COVER FP 3 -. 07-07-227 Shipping time: immediately Number: 07-07-227 Manufacturer: Lid Type: FP 3 MACHINE DATA Year of constr.: 1978 approx. L x W x h: approx. 2000 x 1600 x 1900 mm  ...
used machine
 
TOOL ROOM MILLING MACHINE COVER FP 3 -.
07-07-227
Shipping time: immediately

Number: 07-07-227

Manufacturer: Lid
Type: FP 3
MACHINE DATA
Year of constr.: 1978 approx.
L x W x h: approx. 2000 x 1600 x 1900 mm
Weight: 1500 kg

Good general condition

TECHNICAL DATA
Digital display: 3 - axes - digital display HEIDENHAIN VRZ 754

Procedures:
X - axis: 500 mm

Y - axis: approx. 300 mm

Z - axis: approx. 380 mm

Table clamping surface (rotary table): approx. Ã? 450 mm

Spindle:
Speed range: approx. 40-2000 RPM

Spindle taper: ISO 40

Power: approx. 3,8 kW

Tool clamping: manually

Feeds & express ducts: in all 3 axes

Feed range: approx. 10-500 mm / min
Speed: approx. 1.5 m / min

ACCESSORIES (SEE IMAGES) ETC.
â?¢ Vertical & horizontal - trimmer

â?¢ Angle milling head

â?¢ Hydraulic Vice (jaw width: 125 mm)

â?¢ Centering microscope (cover)

â?¢ Horizontal - counter bearing

â?¢ Boring head (Wohlhaupter UPA 3)

â?¢ Grinding head (original cover)

â?¢ Centering device (cover)

â?¢ Work light

â?¢ Drilling tailstock (stroke: 120 mm)

â?¢ Coolant system

â?¢ Complete machine documentation

â?¢ Various wrenches

â?¢ Horizontal - spindle Cap

â?¢ Safety handwheels

â?¢ Machine feet

â?¢ Approx. 15 piece disc milling cutters

â?¢ Approx. 3 piece horizontal - dollies

â?¢ Approx. 43 pieces of collets

â?¢ Approx. 7 pieces tool holders

â?¢ Various spacers

â?¢ Miscellaneous clamping device

Other accessories on request
Price and other specifications on request
1978
Price  
    request
126128235 102

NINGJIANG CKN 1112 II for sale
Sliding Headstock Automatic Lathe


Weight approx.: 1400 kgDimensions (l x w x h) approx.: 1600 x 1200 x 1700 mmDescription: NINGJIANG NMT CKN 1112 II Sliding Headstock Automatic Lathe - Steuerung: Siemens 802 C Base Line - Spindle: Speed: 10.000 rpm, Pow ...
used machine
 
Weight approx.: 1400 kg
Dimensions (l x w x h) approx.: 1600 x 1200 x 1700 mm
Description:

NINGJIANG NMT CKN 1112 II Sliding Headstock Automatic Lathe


- Steuerung: Siemens 802 C Base Line
- Spindle: Speed: 10.000 rpm, Power: 2,2 kW, Machining-ø (max.): 12 mm
- Front comb: Holder for 5 Turning Tools, Tool holder for 3 cross machining tools (ER 11)
- Speed: 4.500 U/min
- Back comb: Tool holder for 4 drilling tools (ER 11)

General: Piece belt conveyor
- Rapid feed: 24 m/min

Equipment and accessories:
- Cooling: Cooling unit
- Coolant tank capacity 75 L
- Central lubrication
- Working light accessories as shown in the pictures: (for example: ca. 13 x ER 11 collets, ca. 14 x collets)

Attention: No CE conformity!

Transport dimensions:
Machine:
1.600 x 1.200 x 1.700 mm
weight: ca. 1.300 kg
Accessories:
830 x 400 x 500 mm
weight: ca. 100 kg
2011
used machinery auction RESALE 5,900 €  
  DE   request
125983169 103

MIKRON WF-31 D for sale
Universal Milling Machine


X-travel: 560mm, y-travel: 500mm, z-travel: 400mm, spindle cone: SK40, rotational speed: 40-4000/min, control: HEIDENHAIN TNC 355, length: 1800mm, width: 2600mm, height: 2200mm, weight: 2.6t, including clamping elements, ...
used machine
 
X-travel: 560mm, y-travel: 500mm, z-travel: 400mm, spindle cone: SK40, rotational speed: 40-4000/min, control: HEIDENHAIN TNC 355, length: 1800mm, width: 2600mm, height: 2200mm, weight: 2.6t, including clamping elements, collet chucks 2-13mm, vice, miller and two workbenches, available after September 2018.
1991
Price  
  DE   request
126128591 1900

EWS for sale
Collets


Weight approx.: 7 kgDimensions (l x w x h) approx.: 235 x 200 x 300 mmDescription: Ca. 20 pieces, diameter: 6 mm

 
Weight approx.: 7 kg
Dimensions (l x w x h) approx.: 235 x 200 x 300 mm
Description: Ca. 20 pieces, diameter: 6 mm
 
used machinery auction RESALE 70 €  
  DE   request
125983167 103

DECKEL FP4A for sale
Universal Milling and Drilling Machine


X-travel: 485mm, y-travel: 385mm, z-travel: 380mm, power: 7.5kW, spindle cone: SK 40, collet chuck diameter: 3-26mm, rotational speed: 63-3150/min, feed rate: 2-3000mm/min, control: SIEMENS Contour 2, length: 2070mm, wid ...
used machine
 
X-travel: 485mm, y-travel: 385mm, z-travel: 380mm, power: 7.5kW, spindle cone: SK 40, collet chuck diameter: 3-26mm, rotational speed: 63-3150/min, feed rate: 2-3000mm/min, control: SIEMENS Contour 2, length: 2070mm, width: 2080mm, height: 1740mm, weight: 1.8t, including hydraulic vice and hydromechanic clamping system, available after September 2018.
1986
Price  
  DE   request
126128593 1900

Collets


Weight approx.: 7 kgDimensions (l x w x h) approx.: 235 x 200 x 300 mmDescription: ca. 34 pieces, outside diameter: 35 mm, height: 52 mm, inside diameter: 8-25 mm

 
Weight approx.: 7 kg
Dimensions (l x w x h) approx.: 235 x 200 x 300 mm
Description: ca. 34 pieces, outside diameter: 35 mm, height: 52 mm, inside diameter: 8-25 mm
 
used machinery auction RESALE 95 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More COLLET models (2 or more machines):
Collet BFf 85 (2)
COLLET BU 1600 (2)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Universal Milling and Drilling Machine DECKELFP4A

X-travel: 485mm, y-travel: 385mm, z-travel: 380mm, power: 7.5kW, spindle cone: SK 40, collet chuck diameter: 3-26mm, rotational speed: 63-3150/min, feed rate: 2-3000mm/min, control: SIEMENS Contour 2, length: 2070mm, width: 2080mm, height: 1740mm, weight: 1.8t, including hydraulic vice and hydromechanic clamping system, available after September 2018.

Milling Machine DECKELFP3 LV

X-travel: 1200mm, y-travel: 300mm, z-travel: 350mm, rotational speed: 25-2500/min, collet chuck diameter: 1-25mm, spindle cone: SK 40, power: 4kW, length: 2150mm, width: 1800mm, height: 2055mm, weight: 2.6t, available after September 2018.

Center Lathe LEINENDLZ 140

Center height: 140mm, center distance: 500mm, collet chuck diameter: 2-24mm, rotational speed: 15-3100/min, drive power: 2.2kW, length: 1500mm, width: 750mm, height: 1200mm, weight: 1t, including 1x 3-jaw chuck and quick change tool holder, available after September 2018.

Center Lathe COLCHESTERMaster 2500

Center height: 190mm, center distance: 765-1270mm, collet chuck diameter: 6-28mm, rotational speed: 25-2000/min, drive power: 7.5PS, length: 1930mm, width: 965mm, height: 1250mm, weight: 1.145t, including 1x 4-jaw chuck and 2x 3-jaw chuck, available after September 2018.

Lathe EMCOEMCOMAT EM-17D

Center height: 170mm, center distance: 700mm, swing over bed/ sledge: 340/ 190mm, spindle bore: 50mm, max. chuck diameter: 200mm, collet chuck diameter: 3-28mm, rotational speed: 35-3000/min, power: 5.3kW, length: 1596mm, width: 880mm, height: 1240mm, weight: 730kg, including 3-jaw chuck, available after September 2018.

Turning Machines (Lathes) MORI SEIKISL-25A/500

OVERVIEW: Brand: MORI SEIKI Model: SL-25A/500 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 1988 Production hours: 70000 Location: Germany Origin country: Japan GENERAL DATA: Measurements width: 2860/4020 mm Measurements depth: 1500 mm Measurements height: 1750 mm Machine weight: 4200 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 42-4200 1/min CONTROL UNIT: Brand: FANUC Model: 10T MOVEMENT: X-AXIS movement: 160 mm Z-AXIS movement: 590 mm WORKPIECE: Workpiece drm: 230 mm Workpiece x: 530 mm TURRET: Number of turrets: 1 Number of tool slots: 12 mm MEDIA: Power consumption: 35 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 34x Boring bar holder with 62 reductions (upon request) 2 - 7x Collet chucks with collets (Typ 430E/ER25) (upon request) 3 - 2x 3-Jaw Chuck "Forkardt 3KTHS 200-66" (15x hard jaw, 41x soft jaw) (upon request) 4 - 2x Collet chuck "Forkardt ZK8BV 100" with 19x collet Type 173E (upon request)

Turning Machines (Lathes) MORI SEIKISL-25A/500

OVERVIEW: Brand: MORI SEIKI Model: SL-25A/500 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 1988 Production hours: 70000 Location: Germany Origin country: Japan GENERAL DATA: Measurements width: 2860/4020 mm Measurements depth: 1500 mm Measurements height: 1750 mm Machine weight: 4200 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 42-4200 1/min CONTROL UNIT: Brand: FANUC Model: 10T MOVEMENT: X-AXIS movement: 160 mm Z-AXIS movement: 590 mm WORKPIECE: Workpiece drm: 230 mm Workpiece x: 530 mm TURRET: Number of turrets: 1 Number of tool slots: 12 mm MEDIA: Power consumption: 35 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 34x Boring bar holder with 62 reductions (upon request) 2 - 7x Collet chucks with collets (Typ 430E/ER25) (upon request) 3 - 2x 3-Jaw Chuck "Forkardt 3KTHS 200-66" (15x hard jaw, 41x soft jaw) (upon request) 4 - 2x Collet chuck "Forkardt ZK8BV 100" with 19x collet Type 173E (upon request)

Optical Grinding Machines PETEWEPFS 3 U-S

Optical grinder PETEWE PFS 3 U-S manufactured in Germany. This is a very precise optical grinder to carry tools. Specific data: -the maximum diameter of grinding: 180 mm -adjustable spindle speed: 35-350 RPM. -the maximum distance between points: 250 mm -the maximum ground clearance Collet: fi 25 mm -przestawno?? sleeve makes tailstock: 20 mm -Morse taper spindle: MK 4 -Morse taper sleeve makes tailstock: MK 2

Panel Sizing Saw SCHELLINGFW 430

Cutting length: 4260mm, saw blade diameter: 400mm max., program fence travel: 4300mm, saw blade overhang: 105mm, inner bore diameter: 30mm, scoring diameter: 200mm, main motor power: 15kW, lifting table width: 2100mm, number of collet chucks: 9, feed rate: 60m/min max., connected load: 30kW, length: 7800mm, width: 6850mm.

Longitudinal Turning Machines (Lathes) TORNOSMR 32 - 4 units

-4 off MR32 (all with 3 spindle att.) - Serial no. 21235/21318/21094/21123 each machine equipped with gravity feed - -a lot of brand new spare parts and used collets,bushings,pulleys,tools etc.etc.

Longitudinal Turning Machines (Lathes) TORNOSRR 20 - 2 units

-2 off RR20 (both with 13CA-3 spindle att.) - Serial no. 27675/27372(+ milling att.14Y)each machine equipped with gravity feed - -a lot of brand new spare parts and used collets,bushings,pulleys,tools etc.etc.

Longitudinal Turning Machines (Lathes) TORNOSR 16 - 4 units

-4 off R16 (all with 13CA-3 spindle att.) - Serial no. 27188/27626/27811/37135 - 3 machines equipped with gravity feed - -a lot of brand new spare parts and used collets,bushings,pulleys,tools etc.etc.

Precision automatic lathes CITIZENCINCOM B12

Sliding headstock automatic lathe, decolleteuse, CITIZEN CINCOM B12, Construction year: 2001 Serial number B2297, 3-phased 200V, 6 KVA, 15A, Weight: 1060 kg, Total dimensions: 1870 x 780 x H 1550 mm Locatie: Taillage

High Precision Turning Machines (Lathes) CITIZENCINCOM B12

Item description Sliding headstock automatic lathe, decolleteuse, CITIZEN CINCOM B12, Construction year: 2001 Serial number B2297, 3-phased 200V, 6 KVA, 15A, Weight: 1060 kg, Total dimensions: 1870 x 780 x H 1550 mm Locatie: Taillage

High Precision Turning Machines (Lathes) TSUGAMIBW20E-III

Precision lathe, decolleteuse, TSUGAMI BW20E-III, serial number: 5014, Year of construction: 1/2009 Weight: 2500 kg, 29A, 10 KVA, Machine working hours: 15552h, Equipped with external power transformator Total dimensions: circa 1950 x 1600 x H ...

Get the latest machine offers by email: order newsletter