used CINCINNATI Profile extrusion lines

A used extrusion line for the production of rigid PVC profiles, Output approx. 300 - 350 kg/h, consisting of: 1 x twin screw extruder Manufacturer: Battenfeld-Cincinnati Type: ARGOS 93P-28D Year of construction: 2007 Screw diameter: 2 x 93 mm (parallel) Screw length: 28 x D Screw speed: max. 26.0 1/min. Drive power: 50 kW (GS motor) Power: approx. 150 kVA Operation: EXcPRO-XP with 10.4' TFT colour display Accessories: horizontal screw dosing, material hopper Degassing unit with vacuum pump Output: max. 300 - 350 kg/h for rigid PVC, depending on the material and product Note: new gearbox installed in 2014. 1 x Vacuum calibration unit Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Length: 6000 mm Vacuum pumps:3 x BluVac pumps from Speck, Energy-saving vacuum generation through patented speed control Pump power: 3 x 4.3 kW Longitudinal adju ...

Conical twin screw extruder Drive: DC 9kW motor heating zones: cylinder - 3, head - 3 cylinder cooling - oil

PVC production line Screw diameter 55 mm. Main motor power 37 Capacity(kg/h) 100-150 Kg/h Effective length of screw(mm) 1050 Equipment Content : No. Description Quantity 1 twin-screw extruder 1set 2 vacuum calibration tank 1set 3 haul-off&cutter 1set 4 stacker 1set

Profile Width (Max): 235 mm // Output Capacity: 100 kg/h

Conical twin screw extruder Drive: DC 9kW motor heating zones: cylinder - 3, head - 3 cylinder cooling - oil

Complete extrusion line for the production of PP and PS films, produced by Battenfeld-cincinnati GmbH 2012 release, Designed for the production of films of polypropylene and polystyrene. equipped with a loader Moretto Main technical characteristics: Extrusion line: Possible materials for processing PP and PS Max. film width 850 mm Film thickness 300 ÷ 2000 microns Productivity 400kg / hour Gross weight, kg 18 138 kg 2nd position winder: Max. film width 1000 mm Max. diameter of winding is 1400 mm Pneumatic winding shaft diameter for 152 mm (6 ’) sleeves To operate the equipment, a three-phase AC network is required, compressed air with a pressure of 8 Bar, water supply.

Saw for Pipe Cincinnati RS 25 PZ S 1992 year 4000 Euro

60″ x .135″ x 20,000Lb Cincinnati – Forte Loop Slitting Line Material Width: 12″ – 60″ , Thickness: .010″ – .135″, Weight: 20,000Lb, Coil ID: 16″ – 24″, Coil OD: 72″, Speed: 600 fpm, Direction: Left to Right. Entry Turnstile, Entry L-Type Coil Car, Mandrel Uncoiler with Hold-Down Roll, Powered Peeler, Driven Pinch Rolls, PVC Applicator, Entry Shear, Two Slitting Heads, Injection Design, 5″ & 7″ Arbor Diameter, 75HP DC Motor, Two (2) Hydraulic Scrap Winders, Pit Cross Over Table, Drag Board & Rotary Tension Stand, Recoiler with Over-Arm Separator & Push-Off, 150HP DC Motor, Exit L-Type Coil Car & Turnstile. Electrics, Hydraulics, Controls, Tooling, Spare Parts

CINCINNATI ACW6 slitting line is used in the processing of thin steel sheets with a maximum thickness of 4 mm. The process consists in gradually unrolling the sheet coils towards cutting rollers with special roller knives with a thickness of 5 to 30 mm, and then passing the sheet between the rollers for precise slitting. After the slitting process, the sheet is wound onto coils ready for further processing. The ACW6 slitting line guarantees the highest product quality while making optimum use of the raw material. The CINCINNATI coil slitting line consists of: – sheet decoiler – sheet metal winder – roller knives (thickness 5 mm, 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – ejector spacers (width 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – slitting aggregate unit – brake Technical specifications of the CINCINNATI ACW6 slitting line - maximum sheet thickness: 4 mm - minimum shee ...

Materials: PP, PS // Film Width (Max): 850 mm

Cut to length line Herr-Voss/Cincinnati 2400mm x 8mm x 25t (A3780) Material Width: 700mm – 24000mm Material Thickness: 2mm – 8mm Coil Weight: 25 ton Coil ID: 410mm – 650mm Coil OD: 1800mm Direction: L-R Entry Coil Car Hydraulic Lift and Traverse V-Type Floor Standing Design Double Mandrel Uncoiler Powered Hold Down Roll Sliding Base Pneumatic Brake Sliding Base Feed Up Motor Drive Hydraulic Peeler Driven Pinch Rolls 4-Hi Corrective Leveler Nine (9) Work Rolls Work Rolls Diameter: 225mm Motor: 75Kw DC Drive Driven Exit Conveyor 4-Hi Corrective Leveler Eleven (11) Work Rolls Adjustable Work Rolls Work Rolls Diameter: 112mm Motor: 200Kw DC Drive Driven Exit Conveyor Mechanical Shear Entry Pinch Rolls Air Clutch and Brake Exit Driven Conveyor Drop Type Stacker Sheet Length: 1000mm – 7000mm Driven Exit and End Conveyors Electrics,  ...

Description Complete multilayer Pex-Al-Pex pipes production line Main extruder Cincinnati Proton 45-30G Co-extruder Cincinnati CE-30 Cooling tank Cincinnati Sprayon 63T/5,8/3k Vacuum tank Cincinnati Vacon 63T/5,8/3k Haul-off Cincinnati Tracton 63/1C-6 Aluminum welder Leicht WIG-120 Aluminum unwinder AMT AH1,0/1700 Chiller HYFRA VWK30-1-S Aluminum pipe welder AIXCON PWU 400 Stockpile for raw aluminum, forming aluminum pipe, welding aluminum pipe UNIWEMA 30 KMW Generator for welder Huttinger BIG 40/100 Coating extrduer Cincinnati Proton 45-30G Glue co-extruder Cincinnati CE-30 Cooling tank Sider Jack Cooling tank Cincinnati Sprayon 63T/5,8/3k Haul-off Cincinnati RAE 63/1 X1 Marking machine IMAJE 9040 X ray gauge x SCITEQ X-ACT TWINEYE 40 Automatic winder FB Balzanelli TR1350 L1/8/M

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

Vertical machining center Cincinnati Millacron Traverse path x 1270 mm Y: travel 660 mm Z: travel 660 mm CNC control: Acramatic 850SX Table size: 1,370 x 660 mm Table load: 910 kg Rapid traverse x/Y/Z: 15,000 mm / min. Spindle speeds: 60-8,000 rpm. Spindle recording: ISO 40 Distance from spindle - table min/max: 150/880 mm Tool changers: 21 items Equipped with:-cooling device -Hand Council operation -Complete instructions Country of origin: England Spindle motor: 9 kW Machine weight: 8.000 kg Machine WxDxH: 3,600 x 2.900 x 3.000 mm

Workbench drilling machine height capacity CINCINNATI type P310 Rotation from 400 to 20000 RPM Maxi height base/Chuck nose 200 mm Throat depth 120 mm Maxi drilling capacity: 5 mm Voltage 380 V Base dimensions: 200 x 530 mm Width 350 mm Depth 600 mm Total height 600 mm Weight approx. 50 kg MACHINE IN OUR STOCK IN FRANCE.

Tip width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t

Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.

CNC Vertical Maintenance Center Cincinnati CFV-1050i Y.O.M. 2008 Heidenhain iTNC530 Control Table size 1,120 x 600 mm Travel X/Y/Z 1.050/540/720 mm Max table balast 1,000 kg Rapid speed X/Y/Z 36 m/min Spindle motor 12/16 kW Max spindle speed 10,000 rpm Spindle cone SK-40 Tool changer with 30 stations Glass scales X/Y axes Spindle cooler Termical Comp. Cooling by the spindle, 10 bar Pushbutton Renishaw TS27R Extended Z-axis 127-847 mm Conveyor Heidenhain SmartT.NC Handwheel Tools Losma suction

see pdf attached

Drilling capacity: 0 mm Number of drilling units: 0   Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of drill-heads: 2 Drill capacity: 10 mm Table length: 1040 mm Table width: 350 mm Spindle speeds: number (steps): 10 from: 660 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 350 kg Overall dimensions machine: Length: 1150 mm Width: 550 mm Height: 1700 mm Various accessories: Drill chuck: 0.5 - 10 mm Adjustable depth stop

Drilling capacity: 0 mm Number of drilling units: 0   Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of drill-heads: 2 Drill depth (spindle stroke): 100 mm Table length: 1350 mm Table width: 290 mm Taper in spindle: 2 MT Depth of throat: 235 mm Drill head 1:: PE 10 Drill capacity: 10 mm Spindle speeds: number (steps): 10 from: 660 rpm up to: 12000 rpm Drill head 2:: NE 23 Drill capacity: 23 mm Spindle speeds: number (steps): 8 from: 220 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 300 kg Overall dimensions machine: Length: 200 mm Width: 850 mm Height: 1700 mm Various accessories: Vice: width: 100 mm Drill chuck: 2x Adjustable depth stop

This Cincinnati Hawk TC150 lathe was made in the year 2001 in the United Kingdom. It is equipped with a Fanuc Series 21-T. The machine has a spindle speed of 30 - 5500 rpm.

GENERAL CHARACTERISTICS, Grinding Wheel Dimensions Ø406.4 x Ø254 x 101,6 mm, Regulating Wheel Dimensions Ø228.6 x Ø101.6 x 101,6 mm, Ø min / max to grinding 80 mm, DIMENSIONS AND WEIGHTS, Long 1.600 mm, High 1.550 mm, Width 900 mm, Weight 2.500 Kg aprox.

Description Conical Twin Screw Extruder Screws Diameter 45 - 97 Screws Length 390 Barrel zones 3 Nr.1 vent Thermoregulated screws Motor power 15,4 kW Forced feed

Description Conical Twin Screw Extruder Conical screw diamter 50 - 104,6 Screw length 1000 Motor power 29,6 kW nr. 4 Cylinder zones nr.1 vent Forced feed Working hours 54910