used CHRISTEN Deburring Machines

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 390 mm Clamping surface: Length: 300 mm Width: 230 mm T-channel width: 12 mm Taper in spindle: MT: 2 Spindle speeds: number (steps): 6 from: 75 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 720 mm Width: 660 mm Height: 1800 mm Various accessories: Drill chuck: 1 - 13 mm Adjustable depth stop

Drill diameter maximum: 0 mm Drill diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. drill capacity: 0.5 mm Max. drill capacity: 6.35 mm Spitzwinkel min.: 60 ° max.: 180 ° Freiwinkel min.: 0 ° max.: 15 ° Diameter of grinding wheel: 125 x 35 x 50 mm Voltage: 220 Volt Power: 0.15 HP Machine´s weight about: 35 kg Overall dimensions machine: Length: 500 mm Width: 300 mm Height: 300 mm Various accessories: Grinding of double-edged lips Grinding of four-edged lips Centering microscop

Drill diameter maximum: 0 mm Drill diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. drill capacity: 0.5 mm Max. drill capacity: 6.35 mm Spitzwinkel min.: 60 ° max.: 180 ° Freiwinkel min.: 0 ° max.: 15 ° Diameter of grinding wheel: 125 x 35 x 50 mm Voltage: 220 Volt Power: 0.15 HP Machine´s weight about: 28 kg Overall dimensions machine: Length: 400 mm Width: 300 mm Height: 280 mm Various accessories: Grinding of double-edged lips Grinding of four-edged lips Centering microscop

Technical data Min. drill capacity: 2.0 mm Max. drill capacity: 32.0 mm Spitzwinkel min.: 60 ° max.: 180 ° Diameter of grinding wheel: 150 mm Width of the grinding wheel: 40 mm Drilling cap. of grind.wheel: 50 mm Grinding wheel speeds: up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Power: 1.00 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 800 mm Width: 750 mm Height: 1300 mm

Stock number: 3666 TWIST DRILL GRINDING MACHINE Manufacturer: Christen , Type: 2-32 Specifications: Grinding range 2-32 mm Ø Grinding angle Min/Max 60 -180 grader Cooling water system. Weight: 500 kg

CHRISTEN Drill Grinding Machine - with coolant device - approx. 8 grinding wheels Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

x-travel: 250 - 500 mm plate thickness: 2 mm work piece width: 0 - 3 mm total power requirement: kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 0,4 x 0,5 x 1,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 370 mm plate thickness: 0-2 mm work piece width: x mm weight of the machine ca.: 0.2 t dimensions of the machine ca.: 0.6x0.4x1.1 m Dressing device Exhausting device www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Technical details x-travel 250 - 500 mm Sheet thickness 2 mm Workpiece width 0 - 3 mm Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,400 mm, weight approx.: 150 kg

Brush deburring machine, tube deburring machine BAUER Type BE 1 Masch. No. 29-0520 Year of construction 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm. Power 2,2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support Space requirement L x W x H 500 x 450 x 440 mm Weight 45 kg good condition; used

Brush deburring machine, pipe deburring machine BAUER Type BE 1 Masch. No. 05-72025 Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm. Power 2,2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition; used

Brush deburring machine, tube deburring machine ERINI type 250 Year of manufacture approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm. Power 2.2 / 2.8 kW Mains connection 380 volts, 50 Hz - Material support - new deburring brush - Extraction connection 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition; used

Brush deburring machine RSA type RASA Mono Masch. No. R.III-09/2669 Year of construction 2008 Brush diameter max. 250 mm Brush width 60 mm Brush holder 53 mm Brush speed 1500 / 3000 rpm. Motor power 2.6 / 3.1 kW Mains connection 400 volts, 50 Hz - Base with 4 oscillating elements Space requirement L x W x H 720 x 480 x 1180 mm Weight 172 kg very good condition; used

Brush Deburring Machine Fabr. RSA Type STL IIIMachine -No: BIII 3-7262, built in 1986for pipes, profiles, solid material and sheetsWorkpiece diameter: UnlimitedBrush diameter: 250 mmBrush width: 60 mmOperating and protection: S 6-60% IP 44elec. Connection: 380VConnected load: 2/3 kWSpeeds by pole-changing motor Engine: 1500/3000 rpm.External dimensions: 650 x 450 x 1150 mmWeight approx: 75 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double-ended pipe end brush deburring machine Fabr. SCHOELLERPipe diameter: 20 - 70 mmsmallest pipe length approx: 200 mmlargest pipe length approx: 2000 mmBrush pressure: adjustable by handwheelBrush height: adjustable by handwheelPipes are laid manually, after deburring case in onesuitable containermotorized adjustment of tube length (motor missing)Weight approx: 2000 kgExternal dimensions L x W x H: 6200 x 1500 x 2100 mmWith- Control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RSA type ST-No: RG II 48-1902, year of construction 1991for pipes, profiles, solid material and sheetsTechnical specifications:Workpiece diameter: unlimitedBrush diameter: 250 mmBrush width: 60 mm2 speeds thanks to pole-changing motor: 1500/3000 rpm.electr. Connection: 380 V, 2/3 kWSpace requirement: 500 x 650 x 1200 mmWeight approx: 83 kgColor greenWith- base- brushused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine, make RSA, type Rasamax MonoMasch. -No: R-M-38/3305 built in 2000Technical specifications:Material thickness from: 1 - 6 mmSheet thickness: up to 6 mmSheet width: 100 to 1,000 mmSheet length: 100 to 1,000 mmSheet shape: sheets with notches, straight cut sheetsMaterials: steel, stainless steel, NEMax. Brush diameter: 250 mmBrush speed: 1500/3000 rpm.Drive power: 1.0 / 1.4 kWPower connection: 380 V, 50 HzDimensions with base: 400 x 500 x 1300 mmWeight approx: 50 kgWith- Base cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deburring machine make RSA type Turnamat 2Machine -No: 48-1047 / 96 built in 1996Technical specifications:Workpiece cross-sections: 10 x 10 to 150 x 150 mm2 brush speeds: 1500/3000 rpm.Deburring time: 1 - 5 sec.Drive power: 3.5 / 4.6 kWsuitable for- Steel, VA, aluminum, copper and brass- Deburring by rotating the brush at high speed- Service rotation = circling the brush around the axis of rotation, i.e. continuous change of working direction at low speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deburring machine make RSA type Turnamat 2Machine -No: 048-028908 built in 2008Technical specifications:Workpiece cross-sections: 10 x 10 to 150 x 150 mm2 brush speeds: 1500/3000 rpm.Deburring time: 1 - 5 sec.Drive power: 3.5 / 4.6 kWDimensions approx .: 1200 x 1200 x 1800 mmWeight about: 550 kgsuitable for- Steel, VA, aluminum, copper and brass- Deburring by rotating the brush at high speed- Service rotation = circling the brush around the axis of rotation,i.e. continuous change of working direction at low speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RSA type STLMachine -No: RG III 071628 built in 1990for pipes, profiles, solid material and sheet metalTechnical specifications:Workpiece diameter: unlimitedBrush diameter: 250 mmBrush width: 60 mm2 speeds through pole-changing motor: 1500/3000 rpm.electr. Connection: 380 V, 2/3 kWSpace requirement: 500 x 650 x 1200 mmWeight approx: 83 kgwith- several new replacement wire brushesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tooth edge deburring machine make RAUSCH type GRATOMAT GR 300 HV - HORI - FBMachine -No: 4337, built in 1998milling unit:- Hydropneumatic, retracting with additional pneumatic slidexa0xa0 (110 mm quick-stroke, 50 mm working stroke)Druckluftfrässpindel:- 950 mm rpm- right or left rotationBrush unit:- Retracting hydropneumatically- stroke 0 - 100 mm- 1.1 kW- 2800 rpm- Collet diameter 12 mmClamping unit:- Pneumatic three-jaw chuck SCHUNK diameter 160 mm- Possible use for bevel gear pinion shafts with number of teeth 7 - 11xa0xa0 for top or foot machining in full-stroke modeAir consumption: 600 l / minCurrent type: 400 V / 50 HzTotal power requirement: 5 kWSpace required: 3900 x 2900 x 2600 mmDimensions (LxWxH) approx: 2600 x 1800 x 2400 mmWeight approx: 1880 kgWith- CE marking- Fully automatic brush adjustment- full protection cabinused, in good conditionPrice on request.Delivery: ex wareh ...

Sheet metal deburring machine make AMADA type DB 610Machine -No: 61000917 built in 1989Technical specifications:Sheet thickness: 0.5 - 6 mmSheet width: max. 610 mmSanding roll dimensions: 630 x 200 mm2 grinding roller speeds: 1270 + 2030 rpm.2 cutting speeds: 18 + 13 m / sec.Passage speed: 2 m / min.Working table height: 780 mmDrive power: 3.7 kWOscillation drive: 0.4 kWConveyor belt drive: 0.2 kWWeight approx: 800 kgExternal dimensions approx .: 1660 x 1700 x 1400 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

ERNST EG3M deburring machine was built in 1988 in Germany. The surface machining of workpieces with a maximum thickness of 70 mm is performed “dry” by means of a burr-removing sanding roller installed in the machine and two brush rollers moving in the opposite direction intended for edge rounding. To prevent the workpiece from being drawn into the centre of the ERNST EG 3 M deburring machine, the sheet to be deburred is pressed onto the conveyor belt via a driven roller on slack bearings. The ERNST EG 3/M 1400 automatic deburring machine also allows the use of a magnetic belt to process smaller workpieces. The total weight of the deburring machine is 3500 kg. Technical data of the ERNST EG3M deburring machine - maximum workpiece thickness: 70 mm - minimum workpiece thickness: 1 mm - minimum workpiece length: 350 mm - minimum workpiece length on magnetic band: 80 mm - minimum  ...

High-performance deburring system for internal and external deburring of profiles and tubes in a single operation (approx. 3 sec.) Powerful industrial geared three-phase motor, frequency-controlled, for infinitely variable settings of the required speed: 600 - 2,700 1/min, for deburring pipes and profiles with material dimensions horizontal/vertical 120 mm, Easily adjustable work table height (adjustable and lockable) for the appropriate material size adjustable, lockable infeed (carriage) of the deburring brushes to the work table by means of a handwheel with locking function. Drawer for dust residues. Sheet steel housing with prepared for connection to an external extraction system. Housing hoods foldable for changing the brushes. Machine body RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm corrugated st ...

TIMESAVERS 41 SERIE 1350 WRD deburring machine was manufactured in 2004 in the Netherlands. The wide belt deburring machine is used in both small and large production facilities for precision smoothing of sharp edges and finishing work. The machine provides high performance and reliability throughout its service life. The surface machining of workpieces made from e.g. steel, aluminium and titanium is performed wet by a grinding system comprising a reliable abrasive belt and brush unit. The workpiece is dried at the end of the machining process so that the parts leaving the machine are dry and free of contamination. The deburring machine has an integrated paper belt filter into which the used coolant is transferred at the end of the process in order to separate the swarf and allow the coolant to be reused. Technical specifications of the TIMESAVERS 41 SERIE 1350 WRD deburring machin ...