We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
pressure:300 t distance between columns:1220 mm stroke:1000 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1200 x 1000 mm pressure of drawing cushion in table:115 t stroke of drawing cushion in table:400 mm die cushion area:1100 x 860 mm table height over floor:900 mm side window:550 x 1000 mm ram surface:1200 x 1030 mm speed down:400 mm/s speed up:350 mm/s working speed:12 - 31 mm/s oil volume:1080 l power requirement:36,0 + 19,0 kW weight:22,0 t dimensions (WxDxH):2,5 x 2,5 x 6,3 m height over floor:5,4 m height beneath floor:0,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick hydraulic safety block and pump:Fabrikat Rexroth
used
pressure:620 t distance between columns:2250 mm stroke:1250 mm Distance table/ram, max. stroke up, adjustment up:1600 mm table surface area:2200 x 1280 mm ram surface:2200 x 1500 mm table height over floor:800 / 1000 mm column travel -side:750 mm feed down:10 - 250 mm/sec feed up:10 - 500 mm/sec working feed:1 - 24 mm/sec oil volume:2000 l power capacity:45,0 + kW weight:42,0 t Dimensions (WxDxH):3,7 x 2,6 x 6,8 m German Safety: permitted for manual loading:CE-sign foundation pit:not necessary
used
Technical data: -maximum pressing force 40 t -maximum piston stroke 500 mm -Hoisting speed 0-40 mm / s -Return 0-200 m / min -Mounting height 750 mm -Projection up to mid slide 360 mm -Slide clamping surface 440 x 360 mm -Slide clamping pins 40 mm -Table size 630 x 500 mm -Table hole / breakthrough 200 mm -Table height above floor 710 mm -Oil quantity approx. 300 ltr -Drive 400 V / 4 kW -Space requirement approx. B H 1200 x 2800 X 1600 mm -Weight approx. 2500 kg
used
a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.
used
No. 4877: 1 gebr. Single-stand hydraulic press Fabr. EITEL, Type T 6.3, Bauj. 1973
used
Pressing force: 8 t Table surface: 450x260 mm Stroke: 250 mm Projection: 175 mm Lifting speed: 3.9 m/min Retraction force: 4,000 kg Engine: 4 hp Weight approx. 1 t
used
Pressing force 1000 kN Table size 750 x 560 mm, diarrhoea opening 100 mm Installation height 800 mm, stroke 500 mm Projection 360 mm Bear size 530x400 mm, 2 T-slots Ram speed: down 200 mm/sec, up 400 mm/sec Connection load approx. 21 kW Incl. Feeder WE16 for 160 mm bandwidth Coil tray and straightening unit Fabr. OFFICE; Type CA200/R40-7, YOC 1994 Reel, loop control Two-hand operation Manuals
used
YOM: 5.1987 / 2003 - the press was generally renovated by the manufacturer Schuler, along with the replacement of electrics, cables and controls for Siemens Condition: Very good Technical details: Pressing force: 5000 kN, 500 tone Table dimensions: 1500 x 1400 mm Distance from Clamping surface to ram: 1250 mm Distance from the clamping table to the hold-down device min.405 mm, max.605 mm Clamping surface thickness: 335 mm Number of flutes, dimensions: H12 DIN 650, 36 mm Ram size Stroke:: 500 mm Hold-down size Stroke: 200 mm Press height / weight: 5800 mm / 45 tone
used
Two-hand and foot operation Pressing force: 1000 kN Projection: 380 mm Stroke: 650 mm Distance table/plunger, gr. stroke top, verst. above: 950 mm Ejector with end position damping on both sides Ejector travel: 150 mm Ejector force: 160 kN Pressure piece hardened: Ø 98 mm Table surface: 720 x 630 mm Total weight: 7,400 kg
used
Hydraulic precision press Make: JOSSI (CH) Type: HP-5-N Pressing force: max. 5 to (50 kN) Operating pressure: max. 200 bar Installation height: max. approx. 120 mm. Projection: approx. 105 mm. Piston stroke: max. approx. 90 mm. Mounting hole in the piston: 14 mm. Table mount, height adjustable. Incl. 2 hand controls and/or foot release with switch and rollable base. Unfortunately, the table top is missing. Weight: approx. 350 kg, dimensions WxDxH: approx. 85 x 55 x 190 cm. Good used and ready for use. The machine can be viewed and demonstrated under power.
used
Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW
used
Offer 23321 Technical data approx.: - Max. pressure capacity 10 T - Operating pressure min. – max. 15 - 180 bar - Projection 180 mm - Max. installation height 340 mm - Stroke 70 mm - Tool holder 25 mm - Table dimensions W 350 x D 280 mm - Table bore / passage 90 mm - E.- Footswitch - Drive 400 V / 3 kW - Space requirement approx. W 450 x H 1000 x D 800 mm - Space requirement base frame approx. W 450 x H 820 x D 800 mm - Weight approx. 500 kg
used
Inv. Num. : 4464 Type: PL-F UP Producer: OMC Created: 2014 Parameters: Compressive force: 105 t Under table length: 3500 mm Under-table width: 1300 mm Total power requirement: 3 kW Machine height: 1940 mm Machine length: 4000 mm Machine width: 1600 mm Machine weight: 4 t
used
Stroke: 300, table 450x370, 1300kg
used
Key data: 1 t
Hydraulic fine press, MATRA, , up to 1000kg, table: 260x200mm, projection 110, Foot or manual release, without UVV Fully functional, energized to visit
used
Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm
used
Key data: 10 t, 300 mm, 510 mm
Table 470x460 , installation height 605
used
Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg
used
Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg
used
Capacity: 40 t Stroke: 230 mm Distance column/center (Throat): 0 mm Table length: 0 mm Table width: 0 mm MACH-id 5199 MAKE Dirlinler TYPE CDCS 401 P81 YOP 1997 SPECIFICATIONS Hydraulic / Mechanical Mechanical Press force 40 Ton Throat 230 mm Die height 280 mm Stroke Length 5 - 75 mm Power 4 kW DIMENSIONS Length 1200 mm Width 1740 mm Height 2100 mm
Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg
used
Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request
used
Capacity: 200 t Stroke: 900 mm Distance column/center (Throat): 680 mm Table length: 1450 mm Table width: 850 mm Eccentric press SANGIACOMO - T 200 FPR 7055 = Mach4metal Capacity Kg: 200000 Table Length: 1450mm Table Width: 850mm Hole in table:240mm Working height:960mm Ram size: 900 x 680mm Throat: 435mm Stroke: 19 - 230mm Ram adjustment:110mm Strokes: 45Min. Length: 2360mm Width: 1780mm Height: 3865mm Weight: 19000kg
Type: RPRX/25 double hand control movable protective screen around table Ejector force: 1,6 ton stroke of ejector: 110 mm Capacity: 25 ton Max ram adjustement: 450 mm Max counter-pression in table: 12,5 ton Adjustable stroke - counter pression: 180 mm Eletric motor (power): 15 HP Height: 2600 mm
used
very fast Eccentric press, make SCHULER , tested , electrically connected Type PDv 25/200 Masch.-No. 70/32.0610/9 Technical data: Power 25 to Number of strokes approx. 180 /min Extension 200 mm Impact stroke 8 - 80 mm Shock sift creation approx. 60 mm Table size approx. 570 x 410 mm Installation height approx. 310 mm (measured with mounted clamping plate) Width x Depth approx. 1.1 x 1.35 m plus control cabinet Height approx. 2.15 m Engine power 3 kW Weight estimated approx. 1.5 to