used CASOLIN Veneering presses

Pressing length: 3500 mm Pressing height: 2000 mm Total connection KW: 7

SPECIFICATIONS: Working width: 3000 mm Working height: 2000 mm 03 Presses for vertical capping 02 Presses for horizontal capping Hydraulic machine

Sanding height max. 3-150mm ; Throughput: 6-12m/min

Key data: 400 mm, 3200 mm

SPECIFICATIONS: Saw blade diameter mm: 400 Motorized saw blade inclination 45° Slide length mm: 3200 Installed capacity: KW 4.0

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm feed: 5-25 m/min CASOLIN MEGA 230/6 four-side planer -------------------------------------------------------- Machine still in use to visit! 6 spindles, with touchscreen controls. Width and height controlled. Spindle arrangement: 1. Spindle: below, 40 mm diameter, 6,000 rpm, 5.5 kW 2nd spindle: right hand, 40 mm diameter, 6,000 rpm, 11 kW together with 3. Spindle: left, 40 mm diameter, 6,000 rpm 4. Spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW 5. Spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW 6. Spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kW Machine without machining tools. The additional screen on the front of the machine is not included in the scope of delivery (belongs to the window system). (technical information according to the manufacturer - without guarantee!) The  ...

Working width: 6000 mm Working height: 3000 mm Number of cylinders: 4 St. loading dimensions L x W x H: 7.175 x 1.600 x 3.790 mm weight: 3700 kg Casolin Euro ------------------------- HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. EURO Frame press in an extremely stable steel construction. The machine also allows the pressing of already milled wing and frame parts. Working dimensions: 6000mm x 3000mm Installation dimensions: Total length: approx. 7,175 mm Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed maximum pressing height above) = 4,130 mm Loading dimensions: Length: approx. 7,175 mm Height: approx. 3,790 mm Weight: approx. 3,700 kg (technical data according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CASOLIN sliding table saw model ASTRA 3000: – 3000mm steel trolley – width on parallel guide 1100mm – manual lifting and tilting of the blade unit – main blade D=400mm, 5.5 hp motor – 3 blade rotation speeds, 3000-4500-6000rpm – independent engraver, 0.75 hp engine – engraver rotation speed 8000rpm Machine not according to CE standards, for export AVAILABILITY FROM MAY 2024

Spindle moulder Casolin F45L Spindle diameter 40mm Spindle total height 220mm Electric spindle height adjustment Electric spindle tilt angle adjustment +45/-10 Spindle speed adjustable 3000/4500/6000/8000/10000r.p.m 5.5kw main motor Aigner fences Extraction pipes 2x120mm Dimensions of the machine 265x130x180cmH Weight 980kg CE Certified

Description: Four-sided planer for processing classic parquet with chain drive It can process parquet from 200 to 600 mm and from 32 mm to 100 mm wide The capacity of the machine depends on the size of the parquet, up to approx. 150 to 300 m2 per shift Approx. Onsite Dimension. (l x w x h): 2,400 x 900 x 1,500 mm, weight approx.: 1,500 kg

Description: CASOLIN Planer with a chain for the drive and has the option of processing the upper, lower, right or only upper and lower elements Approx. Onsite Dimension. (l x w x h): 2,900 x 900 x 1,900 mm, weight approx.: 3,000 kg

CASOLIN tenosquaring machine model TSX3: – 3000mm steel trolley – protection suspended on the blade – tilting blade D=400mm max, 5.5 hp motor, with 3 speeds 3000-4500-6000rpm – engraver D=110mm, motor hp 0,75, 8000rpm – cutting width on rip fence 950mm – spindle moulder with shaft D=35 x L=170mm, engine hp 5.5 , with 4 speeds 3000-4500-6000-8000 rpm – weight approx. 1500 kg Machine not according to CE standards, for export

Description: Tilt orientation: 30° 45° 60° 90° 60° 45° -->, 105°  , Disc diameter: 360 mm, thickness: 3.2 mm Equipped with engraver diameter: 130 mm and thickness: 3.2 mm. cutting length: 2,050 mm, table length: 3,000 mm, cutting width: 1,860 mm, scoring saw: di spessore 3,2 e diametro 130 mm fine testo libero kW, swival range +/-: da 30 di orientamento 105 gradi inizio questo libro orientamento da 30 90 gradi a 45 gradi quindi 30 45 60 90 60 45 diametro disco 360 spessore 3,2 dotata di °, Approx. Onsite Dimension. (l x w x h): 3,800 x 3,600 x 1,700 mm, weight approx.: 1,600 kg

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500

HOT PRESS Type KOLMAG useful size mm. 3000 x 1300 open mm. 450 n.06 cylinders volt. 380/50 weight : kgs. 4000 heating plan by water

Working Sizes: 1300 x 3500 mm

Veneer press Leopida Format: 2300 x 1000 mm Plates with hot water heating L x W x H: 2300 x 1100 x 2000 mm Weight approx. 2000 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

see photos

Hydraulic press for bent glued parts Tuma FP120 Сharacteristic Table size, mm - 1400х600 Maximum opening size, mm - 1000 Number of upper cylinders, pcs - 2 Number of side cylinders, pcs - 2 Diameter of cylinders, mm - 160 Working pressure, Bar - 180-190 Year of manufacture - 1989

Veneering press OMC PL 105 LC 30/13 Water Work surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature 85 degrees Control system logic contorl Machine control from touch panel readings Temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes Power 21KW CE Certificate Production 2023 Machine available on request New machine Net price

Veneer press OTT JU 65 Pressing area 2500 x 1100 mm 4 cylinders Electric heating Machine is FUNCTIONAL From location Upper Austria fixed price NET € 4,500.0

Press pressure up to 900 KN Hint: without ripcord

• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...

Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table

Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.