used CAMBERSBUR Die Forging Hammer

- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg

furnace 1200 1x1x2m t max 1200 Celsius plc auto door various size possible Industrieöfen- Fertigung und Reparatur jeglicher Art Wartung und Einregulierung von Industriebrennern Industrieöfen für Öl, Gas oder elektrisch beheizt Umfangreichen Sortiments an Feuerfeststeinen, Feuerfestmassen, Isoliermaterialen und Gießereihilfsstoffe namhafter Hersteller. Renovierungen und Instandsetzungen von Ofenanlagen Brenner einstellungen von Ofenanlagen Modernisierungen von Ofensteuerungen Umrüstu ng von elektrischen Öfen auf gasbeheizte Öfen Umrüstung alter Heizsysteme auf Rekuperation Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungs ...

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

Capacity: 0 t Throat: 230 mm MACH-id     5473 MAKE         Sahinler TYPE           SM 60 YOP             2000 SPECIFICATIONS Capacity Kg       60 Kg Distance between column     230 mm Hight under bridge        230 mm DIMENSIONS  Length        1600 mm Width          900 mm Height         1600 mm Weight         1600 kg

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

IMPACT ENERGY, KJ 50 NOMINAL WEIGHT OF FALLING PARTS, KG 2000 MAX NUMBER OF BLOWS PER MINUTE 56 WORKING ZONE DAYLIGHT, MM 530 DISTANCE BETWEEN COLUMNS, MM 2360 DIE IMPRESSION SIZE, MM 530 x 300 STEAM PRESSURE, MPA 0,7-0,9 HAMMER DIMENSIONS, MM 4900 x 1930 HAMMER HEIGHT ABOVE FLOOR LEVEL, MM5000 HAMMER WEIGHT WITH ANVIL BLOCK, KG 50100 ANVIL BLOCK WEIGHT, KG 30000

Weight of impact (Nominal weight of falling parts) kg 3150 Energy of impact kj 80 The greatest number of impacts it is brisk in a minute 56 Distance between racks in light mm 2800 Height working area mm 630 The sizes of a mirror it is brisk 600 x 340 Distance from a mirror bottom it is brisk up to a level of a floor mm 750 Pressure of air before an intake 6-8 Machine overall dimensions: mm ·length 5000 ·width 2500 ·height 4500 Weight of an anvil-block kg 41 250 Weight of a hammer with an anvil-block kg 70 700

Mass of falling parts: 1000 kg Ram stroke: 800 mm Energy of full blow: 3600kgm Quantity of stroke: 110 Mass of hammer: 35t Year of production: 1974r.

Ram stroke: 750 mm Energy of full blow: 1840 kgm Quantity of stroke: 120 u/min Mass of anvil block: 12,5 t Mass of hammer with anvil block: 21,9 t

Max mass of drop parts 150 kgs. Price 3400 EUR

ZIEGLER C41-20A - air forging hammer Hammer weight: 20 kg Strokes: 270/min Lifting height: 200 mm Projection: 180 mm Cylinder diameter: 115 mm Hammermasse: 90 x 50 mm Engine power: 2,2 kW Voltage: 400 V Dimensions WxHxD: 460 x 1110 x 820 mm Weight: 380 kg Equipment: Hand - and foot operation, integrated Ambos Base optional

Pneumatic air forging hammer Stanko MA4132 Weight of the falling parts: 196 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 330 kg/m Distance from ram axis-to-frame: 340 mm Anvil height above the floor: 750 mm Stroke run: 460 mm Striking area: 75x190 mm Motor: 15kW Overall dimensions mm: -Length: 930 mm -Width: 1860 mm -Height: 2160 mm Weight of the hammer: 3450 kg Weight of anwill 1650 kg Price 3800 EUR

(Schloemann) Beche DGH 40 Ton ( Revamped by Schuler group 2019) Manufacturer: BECHE (Schloemann) Type: DGH 40 YOM: Revamped 2019 Machine Number: 2412-HW Including 12 Ton Wellman manipulator Impact work: 40,000 mkg Total bar lift.:1.250 mm Maximum number of strokes:80 Pro Minute Average score: 6 Pro Minute Air consumption per ten blow Blow in . m in required air at the strongest hit: 6.8 Cold Air Compressor performance in m3/min: 41 Cold Air Compressor performance in m3/min:27 Hot air (160° C) Power requirement of the compressor in hp:260 Cold Air Power requirement of the compressor in hp:180 Cold Air Air tank capacity:30 m3 Steam consumption per hit with the strongest hit:3.5 kg Steam consumption per minute (saturated steam):21 kg Clear width between the guides: 1200 mm Maximum singing sounds: 2700 mm Lowest overall height of the dies without dovetail: 575 mm O ...

Manufacturer: BLISS Model: S-2750-4R-72-144 YOM: 1996 Forging Press of 2.750 T Revamped 2016, last operated 20 December 2022 Including 5 Ton Wellman manipulator Main Features 1 - Rated force: 2,500 T 2 - MAX Force: 2,750 T 3 - Slide speed: 56 mm/s at 2,000 T 45 mm/s at 2,500 T 4 - Number of strokes/min in levelling cycle at 400 T: 72 strokes/min 5 - Slide stroke: 1.525 mm 6 - Passage between columns: 1,850 mm2 7 - Maximum opening without removing the tool holder: 2,800 mm 8 - Ejec????on in the lower table: stroke of 610 mm and force of 170 Tons 9 - Lower table sliding by cylinder: capacity of 3 tools 10 - Posi????oning of the slide as well as force and speed are controlled by a programmable controller 11 - Development and storage of programs at the worksta????on on a microcomputer

Manufacturer: Wagner (SMS MEER) Type: SP 1ZO 1000 YOM: Revamped 2006 and 2019 REVAMP REPORT 2019 3.2. Mechanical works 3.2.1. Supplies and Achievements Supply and machining of 4 guiding columns • Material 42CD4V + CPCU 3.1, 0330 x length 6300 from raw forged, treated, dress and owned • Central threads and external thread • The centering bearings will be pre-machined to a rough dimension and finished according to diameters obtained a????er retouching on the lower windchest and the upper yoke. Refurbishment of the lower bedstead: • Cast steel • Weight of 10,600 Kg and dimensions of 3500 x 3174 • 1050 Moun????ng on boring machine with balancing and geometric and dimensional checks • Retouching of the 4 lines of bores with 0330/332 (Rework of a maximum of 1mm/rays) • Dressage of inferiors and superiors • Retouching of 2 sides with 0340H7 and Ø330H7 (mini) • R ...

Pneumatic air forging hammer STANKO MA4129 Weight of the falling parts: 80 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 140 kg/m Distance from ram axis-to-frame: 300 mm Anvil dimensions: -Length: 130 mm -Width: 63 mm -Anvil height above the floor: 800 mm Diameter of working cylinder: 250 mm Diameter of compressor cylinder: 260 mm Stroke run: 385 mm Optimal stamping section of work-piece: -Square: 60 mm -Rounded: 80 mm Overall dimensions mm: -Length: 790 mm -Width: 1566 mm -Height: 1900 mm Weight of the hammer with an anvil-block: 3100 kg Price 3100 EUR

Bear weight: 300kg, lifting speed: 130/min, with documentation, an on-site inspection is possible.

Bear weight: 400kg, lifting speed: 125/min, connected load: 30kW, with documentation, an on-site inspection is possible.

Bear weight: 500kg, lifting speed: 120/min, connected load: 45kW, with documentation, the scraper is defective, the dovetail is broken, an on-site inspection is possible.

Bear weight: 1t, max. impact energy: 27kJ, stroke rate: 95/min, max. stroke: 950mm, working height: 800mm, drop face dimensions: 365x180mm, connected load: 75kW, length: 4125mm, width: 1500mm, height: 3662mm, weight: 20t, with documentation, on-site inspection is possible.

Type 5 Nominal weight of falling parts 1750 kg Impact energy, not less than 4878kgm Number of strokes per minute 85 Max. ram stroke 890mm Diameter of ram 455mm Ram pallet face 405x305mm Anvil pallet face from floor 535mm Height above floor 4040mm Baseplate 4405x2085mm Motor rating 110 kW Weight 40000kg Weight without anvil block 25000kg

Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR

Producer: HUTA ZYGMUNT, Model: MPM 6300B, Origin: Poland, New in: 1978, Force: 2500 kGm, Stroke of ram: 850 mm, Space between shears: 650 mm, Length of die seat in ram: 650 mm, Length of die seat in cushion: 900 mm, Max. weight of top die: 800 kg, Min. die height: 300 mm, Strokes/min: 100,

old belt drop hammer in good condition with hand lever release Bär ca.450 Kg drive directly with mint gear motor, belt and hammer stand. incl. used new gear motor weight compl. approx. 8 to.