used BROOK HANSEN Electric motors

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg

Electric motor BROOK CROMPTON Type: D160 LD ( D160LD ) Engine power 15 kW Speed : 1460 rpm Voltage: 220/ 380V eddy current coupling: 180 CD4/2 Power: 12.3 kW Speed: 1275 rpm 90V, 3.3 Ad.C. protection class: IP23 PYE Dimensions: 1040x450x500 mm

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2850 rpm -Shaft: Ø 19 x 100 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 355/200/H220 mm -Weight: 12.5 kg

new, unused Right Angle Shaft Double Stage Reduction Horizontal rotating NE23BRN4 N (reducer with series N compact housing solid shaft) E (Size E) 2 (Double Stage Reduction) 3 (with right angle horizontal shafts) BRN (indicates the assembly arrangement shaft arrangement) 4 (nominal ratio) 71 kW n1 750 u/min n2 187,5 u/min

EDM machine - X: 500 mm - Y: 295 mm - Z: 385 mm - C-axis: 360° - Clamping area: 780 x 500 mm - Spacing table - Pinole: 285 - 660 mm - Workpiece weight: 1200 kg - max travel speed X,Y,Z: 600 mm/min - Clamping system: EROWA - C-axis measurement resolution: 0.001° - Electrode changer: 16 -fold - Electrode changer: pick-up - Electrode weight: C-axis 20 kg - max. single electrode weight: 5 kg - Electrode changer total load: 40 kg - Dielectric cooler - Dielectric filter candles: 3 pieces - Dielectric filling height: 345 mm - Dielectric capacity: 450 l - Dielectric aggregate: separate - Generator: 30 A A - Control: EROCOM 200 - Fire extinguishing system - Total power: 8 kW - Machine weight: 4400 kg - Space requirement (W x D x H): 2.2 x 3.3 x 2.4 m - Condition: very good Details tested by Maho technicians, ready for demonstration under electricity, instru ...

X-travel: 300mm, y-travel: 150mm, z-travel: 200mm, table dimensions: 350x450mm, controls: EROPULS 2002, length: 1200mm, width: 1200mm, height: 2000mm, weight: 1.4t, including documentation, without magnet clamping plate.

Controls: Dieter Hansen EROCOM, including documentation and accessories.

Mains voltage: 380V, connected load: 13kW, controls: Heidenhain TNC 125, the machine is in very good condition.

Gearboxes, spur gear units used HANSEN Type: RLF41-BNVH-12 Translation i: 111 Shafts approx. Ø 45 / 165 mm Dimensions: approx. 1200 x 750 x 670 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Gearboxes, spur gear units used HANSEN Type: D753CT Translation i: 453 Shafts approx. Ø 38 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Gearboxes, spur gear units used HANSEN Type: D743CT3 Translation i: 203 Shafts approx. Ø 50 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Key data: 730 mm, 630 mm, 12 A

Made in Germany X-axis 525 mm Y-axis 400 mm Z-axis 375 mm Dielectric tank 400 L Machine dimension; W 2100 x D 2450 x H 2600 mm Weight: 4800 KG Work table: L 730 x W 630 mm Operating voltage 400 V - 50 Hz Current consumption 12 A Control voltage 230 AC/ 24 DC Back-up fuse: 25 A Moto software is missing Price basis: free loading

Description: Serial number: 60318 Technical data (without guarantee): Table size X x Y: 600 x 400 mm Color path X x Y: 350 x 250 mm Z: 340 mm Workpiece height: max. 240 mm Table quill: max. 520 mm Generator: 20 - 120 A With accessories including EROWA electrode holders (approx. 28 pieces) as shown in the pictures and technical documentation as shown in the pictures weight approx.: 3,900 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,700 x 2,100 mm

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.

Perske 10DW 12/10 DA 12/2 Frequency converter Drive motor: Type: DA 12/2 8KW 400V 50 HZ S1 IP 54 Circuit: Triangle 2910 RPM Coil: 7.5 A 380 V excitation voltage excitation 50 HZ excitation frequency donation page: Type: 10DW 12/10 10 kVA power 35 A of output current 300 Hz output frequency output voltage of 165 V speed: 12000 U/1 18,000 U/1 G & 2768-M3520

2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm

Various electric and geared motors SIEMENS, SEW, BAUER, DEMAG etc. , see pictures, extra list on request.

Attention Clearance Sale!!!! We need space, therefore we offer an price of 0,7 € / kg We have many used electric motors from different sice an manufaktors for sale. Condition of the electric motors is seen on the pictures. We sell this units only to dealers for export without warranty.

E-motor, 220 kW, 745 RPM

WEG NBR 7094~ ~ 3 160 M No. 0298 NA 98795 INDUCTION MOTOR M2 60 COD: N HP 15 (20) RPM: 3540 F3 1.15 (53) F 80 K 7.7 IP 55 220/380/440 V 50.0/ 28.9/25.0 A

THREE-PHASE INDUCTION MOTOR MANUFACTURER: EBERLE MODEL: B 130 - L8 No. 075/0106 15 HP 11KW 60 HZ 870 RPM INCOME: 90.0% COS 0.70 IP/IN 5.1 ISOL. F CAT. N REG SL IP 55 FS1.15 BEARING - INTERV. LUB - QT GREASE - TYPE OF GREASE LA 6311.03 20,000 HS 20 g POLYREX LOA 6311.03 20,000 HS 20 g MASS 134 KG

Condition: NEW Price per piece

Item No. 4958: 1 gebr. DC Servo Motor Fabr. IJR, type HM IOS-E, with 1000 min-1 Drive power: 0.1 kW

see pictures