british flag
Resale Logo

Bottom used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machines and plants for waste disposal and recycling  Hauck GmbH  http://www.hauck-entsorgungslogistik.de 
banner logo
start page > keywords Bottom > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121704574 107

WEMO 4 Statione for sale
Bending Machines


WEMO longitudinal bending line BJ. 1995 / chunk size 1600 x 800 mm / thickness range dependent on strength ~ 0,4-1,2 mm / consisting following stations: recording or centering station - 4 bending stations: 1a: swivel ben ...
used machine
 
WEMO longitudinal bending line BJ. 1995 / chunk size 1600 x 800 mm / thickness range dependent on strength ~ 0,4-1,2 mm / consisting following stations: recording or centering station - 4 bending stations: 1a: swivel bending left 60° bottom-up / 1B: swivel bending right 60 ° down-up / 2: Swivel bending left + right 90° bottom-up / 3a: swivel bending left facets of bottom up / 3B: swivel bending right Fecetten bottom-up / 4 swivel bending left + right / discharge station / spare parts / good condition fe.gi.maschinen.sbg.at

WEMO longitudinal bending line / year 1995 / part size 1600 x 800 mm / thickness range depending on strength ~ 0,4-1,2 mm / consisting of the following stations: recording or centering station - 4 bending stations: 1a: pivoting left 60 ° down-up / 1B: pivoting right 60 ° down-up / 2: swivel bending left + right 90 ° down-up / 3a: swivel bending left facets down up / 3B: swivel bending right facets down up / 4 swivel bending left + right / take-off station / spare parts / good condition
Fe.gi.Maschinen.SBG.at
1995
Price  
    request
121632680 706

COENCO 10.000 hl for sale
Brewhouse / brewery plant


Brewhouse for 10.000 hl p.a., built 2012, dismantled and stored, for sale with: - 2-roller-malt mill, 800 kg/h, with malt conveyors, set of magnets, malt hopper; as too flour mill type SK2500 for 850 kg/h for Meura pres ...
used machine
 
Brewhouse for 10.000 hl p.a., built 2012, dismantled and stored, for sale with:
- 2-roller-malt mill, 800 kg/h, with malt conveyors, set of magnets, malt hopper; as too flour mill type SK2500 for 850 kg/h for Meura press, with Auger, set of magnets, extra buffer tank
- Brewhouse, make CoEnCo, in stainless steel, with Pre-masher type Alloysius; brewblock with mash-/wort vessel 20 hl net / 40 thl total content, with agitator, isolated, and lautertun 20 hl net content, with agitator, isolated, with s/s false bottom, spent grains hatch, control cabinet with Siemens Simatic Touch Panel; Filter buffertank, 22 hl content; Meura-mash filter built 2015; heat exchanger 30 hl/h; hot water tank 45 hl content
- Steam generator, make Fulton, for 320 kg steam/h, gas, with water treatment plant on chassis, condensate tub, pump, chimney.
2012
375,000 €  
    request
121632630 709

SOREN diverse for sale
dough-making line


Plant was only for test purposes in operation! Production as well as cooling down and ventilation of masses. performance: approx. 1200 kg/h Condition: like new Inspection: by appointment Composition: Flour =  ...
used machine
 
Plant was only for test purposes in operation!

Production as well as cooling down and ventilation of masses.

performance: approx. 1200 kg/h
Condition: like new
Inspection: by appointment

Composition:
Flour = 30-40%
Water = 60- 70%

inlet temperature: + 30 ° C
outlet temperature: + 4 °
outlet density: approx. 400g/ltr.

Pos. 1
continuous mixer for masses
- Capacity max. 1,200 kg/h
- Base frame made of tubular stainless steel construction with bottom-mounted, height-adjustable machine feets
- Product receiving hopper for receiving continuously supplied dough components
- Dosing screw AE = 90mm made of stainless steel AISI 316 for the supply of dry components, driven by frequency controlled 0.75 kW three-phase current geared motor with adjustable speed
- additional connection flange for continual feeding of the liquid components

1 piece double-walled mixing cylinder made of stainless steel AISI 316, with integrated horizontal stainless steel mixing shaft, driven by frequency-controlled 4 kW three-phase current geared motor with adjustable speed

2 pieces flushing connections for circulation of a heating cooling medium
- Product outlet opening with connection piping to the following intermediate tank
- Connecting flange for connection to a customer supplied CIP cleaning system
- Connecting piping for connection of the individual components

1 piece stainless intermediate container 100 ltr.
- positioned immediately next to the above-named continuous mixer
- Capacity approx. 100 liters
- built on tubular stainless steel frame with bottom-mounted, height-adjustable machine feets
- Limit switch secured, hinged container lid
- Connection fitting for product infeed on tank top
- built-up stirring tool for continuous product movement, driven by three-phase current geared motor with constant speed (25 rpm)
- integrated level monitoring via Liquiphant brand Endress + Hausser, type FTL 360
- Product outlet opening with 90 °C connecting piping to the replicating progressing cavity pump
- bottom-mounted manually operated stainless steel flap valve DN100

1 piece CSF eccentric screw pump for supplying the mass to the following scraped surface heat exchanger
- built on stainless steel base frame
- Rotor shaft made of stainless steel AISI 304, driven by frequency-controlled 2.2 kW three-phase current geared motor with adjustable speed
- Replaceable stator made of food-approved elastomers, version, adapted to the mass used
- integrated magnetic table inductive flow meter of the brand Endress + Hauser
- Control via subsequent scraping heat exchanger

1 piece stainless 2 compartment pipe filter system
- in detail consisting of:
- 2 pieces tubular stainless steel filter cartridges with removable tubular stainless steel filters
- Manually operated 3-way valve made of rust-free stainless steel for alternating operation of the filters
- Required connecting bore for connection to the piping system
- Mounting materials

2 pieces scraped surface heat exchangers SSHE Mod.HD 804
- product input temperature max 30 ° C
- product outlet temperature min + 4 ° C
- Product cylinder made of stainless steel AISI316L
- Wiper blade made of stainless steel AISI316L
- Blade made of stainless steel AISI316L
- each powered by 15 kW electric geared motor with constant speed
- insulation by means of mineral wool
- Outer cylinder made of stainless steel AISI316L
- refrigerant glycol,
Temperature range -12 ° C,
Flow rate up to 12,000 Ltr./h

2 piesces glycol water control systems with modulating 3-way control valves
each consisting of:
- 3 pieces stainless steel ball valves 1 1/4 "
DN 40
- 1 pc. GEMÜ water valve
- 1 pc. GEMÜ limit switch
- 1 pc. Solenoid valve
- 1 pc. SAMSON 3-way valve DN 40
to -50 ° C
- 1 piece Transmitter
- 2 pieces Thermometers
- 1 piece pressure gauge 0-10 bar for water
- 1 piece safety valve
- 1 piece piping system incl.
Flange parts, fastening material etc., piping
electrically welded and polished inside
Glands executed acc. DIN 11851

1 piece flow rate measuring system
- brand Endress + Hauser
- Type Promag 53H, DN 40

1 piece air dosing system
complete including air flow measuring system

1 piece stainless steel cabinet to hold all necessary load controls
in detail consisting of:
- Dimensions (WxHxD): 1200 x 900 x 300 mm
- Degree of protection IP65 outside, IP20 inside
- Integrated main switch as well
Motor protection switches, motor contactors, transformers and
voltage monitoring
- Automation via Simens S7-300
including the required signal conditioning instruments,
analog and digital input and output cards
- Operation via Siemens color touch panel type MP277, integrated in the control cabinet door
- complete including Programming, circuit diagram creation, operating and maintenance instructions
2013
Price  
    request
121632614 706

TRANS-TECH HYSEK BMH Feed Gear, 120.000 cph for sale
Ionized Air Can Rinser Trans-Tech Hysek


Ionized Air Can Rinser Trans-Tech Hysek 120 000 cph This German built Trans-Tech CAN Rinser with 2x BMH Empty Can inverters was built and installed in 2011. It is in excellent conditions. It comes with a 180 degree c ...
used machine
 
Ionized Air Can Rinser Trans-Tech Hysek 120 000 cph

This German built Trans-Tech CAN Rinser with 2x BMH Empty Can inverters was built and installed in 2011. It is in excellent conditions. It comes with a 180 degree can twister on the top part, the ionized air rinser (with pumps and treatment) and a 180 degree upright twister on the bottom of the rinser. The platform and supports are included. The equipment is installed and in use, and can be inspected in operation.

Make: Trans-Tech Hysek and BMH Feed Gear
Manufacturing year 2011
Capacity: up to 2.000 can per minute (120 000 cph)
Running hours: less than 8.000 hrs
Container handling: 8oz – 66mm diameter / 87mm height
350ml – 66 mm diameter / 122 mm height
473ml – 66 mm diameter / 157 mm height
10.5oz – 57 mm diameter / 138 mm heigth
Electricity: 460 V / 60 Hz
2011
Price  
  FI   request
121614975 308

LEMO Lemo DKT 850 for sale
bag making m/c


carrier bags with handle reinforcement (glued) -SERVO machine for PE films, feed 200-600 mm, bottom gusset 30-80 mm -unwinding maximum foil width 1,600 mm -maximum 220 cycles/min to see in production
used machine
 
carrier bags with handle reinforcement (glued)
-SERVO machine for PE films, feed 200-600 mm, bottom gusset 30-80 mm
-unwinding maximum foil width 1,600 mm
-maximum 220 cycles/min
to see in production
1999
Price  
    request
121614967 1300

LEMO 850 DKTL for sale
Plastic Bag Converting Machine


Material width: 1600mm max., bag height: 300-800mm, bag width: 200-600mm, speed: 100m/min/ 220cycles/min max., glue types: Henkel Q8733, Ulitex HK 717, glue consumption:
used machine
 
Material width: 1600mm max., bag height: 300-800mm, bag width: 200-600mm, speed: 100m/min/ 220cycles/min max., glue types: Henkel Q8733, Ulitex HK 717, glue consumption: <3g/m², unwinder width: 1600mm max., roll diameter: 1200mm max., welding and cutting width: 850mm max., slip film unwinding width: 140mm max., slip film roll diameter: 1200mm max, bottom fold depth: 30-80mm, length: 12945mm, width: 2605mm, height: 3300mm.
1999
Price  
  DE   request
121614486 1403

ZARGES for sale
Zarges Platform ladder


Platform ladder, used - 3 levels - landing staircase - platform ladder - 1,720 x 820 x 1.620 mm (Hxwxd) - Zack Unilaterally walk-in, used platform conductors made of aluminium. The 600 x 790 mm platform enables a safe ...
used machine
 
Platform ladder, used - 3 levels - landing staircase - platform ladder - 1,720 x 820 x 1.620 mm (Hxwxd) - Zack

Unilaterally walk-in, used platform conductors made of aluminium. The 600 x 790 mm platform enables a safe working and is equipped with a three-sided railings including foot and knee bar, as well as a unilateral handrail.

Due to the resistant materials used, the industry leader is extremely durable and suitable for the daily indoor as well as outdoor use.

Best quality German made

The manufacturer of Zarges is known for its high-quality products. This platform ladder manufacturing according to high quality standards in Germany. So you can be sure that this leader in used condition will give you good service.

The podium ladder comes from a range which was used in the manufacture of rolling stock in Krefeld, Germany.

Properties:
-Dimensions approx: 1,720 x 820 x 1.620 mm (Hxwxd)
-Load: 150 kg
-Material: Aluminium
-Strong square tube beams
-Pedestal: 600 x 790 mm (Wxd)
-3-facet railing
-With foot and knee bar
-Side walkable
-M4 aluminum levels, R9
-Tread width: 605-680 mm (top bottom)
-4 swivel castors, brakes when using
-Approximate weight: 35 kg
-Regularly tested

Execution:
-Number of stages: 3 PCs.
-Height approx.: 720 mm
-Stairs with single handrail
-Climbing angle: 60 °

From a platform height 1.00 m, 637 dual handrails are required in accordance with BGI. If you require handrails or handrails, you can request this with us.

With the purchase of required accessories such as railings and handrails we can supply also a test badge also wish

Properties:

Number of stages: 3 units
Material: Aluminum load capacity: 150 kg
Climbing angle: 60 °
Approximate weight: 35 kg

Dimensions:

Height approx: 1,720 mm
Approx. width: 820 mm
Depth approx.: 1,620 mm

Podium:

Height approx.: 720 mm
Width approx.: 600 mm
Depth approx.: 790 mm

You can pick up this article by appointment at our warehouse in Krefeld, Germany. Of course, we deliver you the articles also in the House. To do this we will create an offer you. Please have understanding that we can call you free shipping without the zip code of your delivery address. We cooperate with several carriers, which operate different routes. Your advantage: We can gain the best transport price for you. Please contact them before you buy.
 
315 €  
    request
121614419 1403

ZARGES for sale
Platform ladder


Platform ladder, used - 5 levels - landing staircase - platform ladder - 2.190 x 865 x 1,800 mm (Hxwxd) - Zack Unilaterally walk-in, used platform conductors made of aluminium. The 600 x 800 mm wide platform enables a ...
used machine
 
Platform ladder, used - 5 levels - landing staircase - platform ladder - 2.190 x 865 x 1,800 mm (Hxwxd) - Zack

Unilaterally walk-in, used platform conductors made of aluminium. The 600 x 800 mm wide platform enables a safe working and is equipped with a two-sided railings including foot and knee bar, as well as a unilateral handrail.

Due to the resistant materials used, the industry leader is extremely durable and suitable for the daily indoor as well as outdoor use.

Best quality German made

The manufacturer of Zarges is known for its high-quality products. This platform ladder manufacturing according to high quality standards in Germany. So you can be sure that this leader in used condition will give you good service.

The podium ladder comes from a range which was used in the manufacture of rolling stock in Krefeld, Germany.

Properties:
-Dimensions approx.: 2.190 x 865 x 1,800 mm (Hxwxd)
-Load: 150 kg
-Material: Aluminium
-Strong square tube beams
-Pedestal: 600 x 800 mm (Wxd)
-2-page railing
-With foot and knee bar
-Side walkable
-M4 aluminum levels, R9
-Tread width: 600-760 mm (top bottom)
-4 swivel castors, brakes when using
-Approximate weight: 40 kg
-Regularly tested

Execution:
-Number of stages: 5 PCs.
-Height approx.: 1200 mm
-Stairs with single handrail
-Climbing angle: 60 °

From a platform height 1.00 m, 637 dual handrails are required in accordance with BGI. If you require handrails or handrails, you can request this with us.

With the purchase of required accessories such as railings and handrails we can supply also a test badge also wish

Properties:

Number of stages: 5 units
Material: Aluminum load capacity: 150 kg
Climbing angle: 45 degrees
Approximate weight: 40 kg

Dimensions:

Height approx.: 2.190 mm
Width approx.: 865 mm
Depth approx.: 1,800 mm

Podium:

Height approx.: 1200 mm
Width approx.: 600 mm
Depth approx.: 800 mm

You can pick up this article by appointment at our warehouse in Krefeld, Germany. Of course, we deliver you the articles also in the House. To do this we will create an offer you. Please have understanding that we can call you free shipping without the zip code of your delivery address. We cooperate with several carriers, which operate different routes. Your advantage: We can gain the best transport price for you. Please contact them before you buy.
 
350 €  
    request
121596405 201

SICAR 80 for sale
Vertical belt saws


-Machine in stock -After reviewing the technical -VG condition -Year of manufacture 2003 -Wheel diameter-fi 80 cm -The motor 7.5 kW – The dimensions of the table top 70 cm x 120 cm -Table top made of cast iron ...

 
-Machine in stock
-After reviewing the technical
-VG condition
-Year of manufacture 2003

-Wheel diameter-fi 80 cm
-The motor 7.5 kW
– The dimensions of the table top 70 cm x 120 cm
-Table top made of cast iron
-Tilting Table 45 "

-Stabilizing Plates saw-top and bottom
-Maximum cutting height 330 mm
-The distance between arm and belt 750 mm
-Brake Manual foot control
-Machine equipped with the Guide and feed material

-10 feed speed

-Pneumatic wheels towing

-Suction diameter 120 mm
-Machine height 240 cm
-Machine weight 650 kg

-The machine in perfect condition!
-For each professional
-Production of the Italian a reputable company Sicar
 
Price  
  PL   request
121596374 706

HOLVRIEKA, LANDALUCE outdoor, vertical, cooled for sale
CCT Fermenting Tank 4 x 1920 hl


CCT Fermenting Tank 4 x 1920 HL Holvrieka / Landaluce Conical cone fermenting tanks (CCT) with gross capacity 1920 HL and net 1536 HL. All tanks are identical, two of them made by Hovrieka and two of them by Spanish L ...
used machine
 
CCT Fermenting Tank 4 x 1920 HL Holvrieka / Landaluce

Conical cone fermenting tanks (CCT) with gross capacity 1920 HL and net 1536 HL. All tanks are identical, two of them made by Hovrieka and two of them by Spanish Landaluia - all made in year 1998. Tanks are vertical outdoor type with 180 mm PU insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. Tanks have mechanical cooling control as well as product handling valve system and outside on tank skirt, there are two sample taking valves. The cones has been refurbished / modernized by changing sample taking valve and adding level sensor. Generally tanks are in good condition and they have a high hygienic level.

Technical Data
Made by Holvrieka / Landalusia
Made in year 1998
Number of tanks 4 pcs
Type Outdoor vertical
Insulation PU 180 mm side and 230 mm in cone
Volume gross / net 1920 / 1536 HL
Design pressure Holvrieka 1.5 bar + statistical pressure
Design pressure Landalucia 1.0 bar + statistical pressure
Design vacuum 300 / 500 mm Water Column
Cooling media Glycol - water solution
Cooling zones 3 (including cone)
Tank inner diameter 5200 mm
Total height 11.7 m
Empty weight 17 000 kg with insulation
1998
Price  
  FI   request
121596302 706

HOLVRIEKA, LANDALUCE outdoor, vertical, cooled for sale
Bright Beer Tank BBT 2500 HL Holvrieka / Landaluce


Bright Beer Tank BBT 2500 HL Holvrieka / Landaluce Conical cone bright beer / fermenting tanks with gross capacity 2500 HL and net 2380 HL. All tanks were supplied by Steinecker two of them made by Hovrieka in year 19 ...
used machine
 
Bright Beer Tank BBT 2500 HL Holvrieka / Landaluce

Conical cone bright beer / fermenting tanks with gross capacity 2500 HL and net 2380 HL. All tanks were supplied by Steinecker two of them made by Hovrieka in year 1998 and two of them by Spanish Landaluce in year 2000. Tanks are vertical outdoor type with 180 mm PU insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. Tanks have automatic (electro-pneumatic) valve system supplied by Steinecker. Generally tanks are in good condition and they have a high hygienic level.

Technical Data
Made by Holvrieka / Landaluce
Made in year 1998 / 2000
Number of tanks 4 pcs
Type Outdoor vertical
Insulation PU 180 mm side and 230 mm in cone
Volume gross / net 2500 / 2380 HL
Design pressure Holvrieka 1.5 bar + statistical pressure
Design pressure Landalucia 1.0 bar + statistical pressure
Design vacuum 300 / 500 mm Water Column
Cooling media Glycol - water solution
Cooling zones 3 (including cone)
Tank inner diameter 5200 mm
Total height 14.5 m
Empty weight 19 000 kg with insulation
1988
Price  
  FI   request
121595374 709

DIZIO CONSTRUCCIONI outdoor, vertical, cooled for sale
CCT Fermenting Tank 10 x 1200 hl Dizio


CCT Fermenting Tank 10 x 1200 HL DIZIO Conical cone fermenting tanks (CCT) with gross capacity 1200 HL and net 1016 HL. All tanks are identical, made by Italian DIZIO Costruccioni Meccaniche S.p.A - all made in year 1 ...
used machine
 
CCT Fermenting Tank 10 x 1200 HL DIZIO

Conical cone fermenting tanks (CCT) with gross capacity 1200 HL and net 1016 HL. All tanks are identical, made by Italian DIZIO Costruccioni Meccaniche S.p.A - all made in year 1987. Tanks are vertical outdoor type with 150 mm PU insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. Tanks have mechanical cooling control as well as product handling valve system. Generally tanks are in good condition and they have a high hygienic level.

Technical Data
Made by Dizio
Made in year 1987
Number of tanks 10 pcs
Type Outdoor vertical
Insulation 150 mm PU
Volume gross / net 1200 / 1016 HL
Design pressure 1.5 bar + statistical pressure
Cooling media Glycol - water solution
Cooling zones 3 (including cone)
Tank inner diameter 4800 mm
Total height approx 10.5 m
1987
Price  
  FI   request
121595373 1200

HOLVRIEKA AND DIZIO outdoor, vertical, cooled for sale
Fermenting Tank CCT 910 hl Holvrieka/Dizio


Fermenting Tank CCT 910 HL Holvrieka / Dizio Conical cone fermenting tanks (CCT) with gross capacity 910 HL and net 800 HL. All tanks are identical, made either by Hovrieka or by Italian DIZIO Costruccioni Meccaniche  ...
used machine
 
Fermenting Tank CCT 910 HL Holvrieka / Dizio

Conical cone fermenting tanks (CCT) with gross capacity 910 HL and net 800 HL. All tanks are identical, made either by Hovrieka or by Italian DIZIO Costruccioni Meccaniche S.p.A - all made in year 1987. Tanks are vertical outdoor type with 150 mm PU insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. Tanks have mechanical cooling control as well as product handling valve system and outside on tank skirt, there are two sample taking valves. The cones has been refurbished / modernized by changing sample taking valve and adding level sensor. Generally tanks are in good condition and they have a high hygienic level.

Technical Data
Made by Holvrieka / Dizio
Made in year 1987
Number of tanks 36 pcs
Type Outdoor vertical
Insulation 150 mm PU
Volume gross / net 910 / 800 HL
Design pressure 1.5 bar + statistical pressure
Cooling media Glycol - water solution
Cooling zones 3 (including cone)
Tank inner diameter 4800 mm
Total height 9775 mm
1987
Price  
  FI   request
121595091 204

JET DDS-225 for sale
Grinding machines


Cylindrical grinder DDS-225 is intended for grinding of wood and derived materials. Principle of operation of grinders: The introduction of the workpiece in the machine is done automatically through a feed, in the  ...

 
Cylindrical grinder DDS-225 is intended for grinding of wood and derived materials.

Principle of operation of grinders:

The introduction of the workpiece in the machine is done automatically through a feed, in the opposite direction to the work of the waltz diamond wheel.
The element of different thicknesses on the ends, make the machine first, thicker end, offset to the bottom.
At the same time, you can grind the two elements. By introducing them at both ends of the rollers.
For ease of use longer grinding elements can be propped on the roller trays as an option.
Setting the item under a small angle leads to increase the efficiency of grinding.


TECHNICAL PARAMETERS:

-Rated power 5550 in
-The power of actual 3700 in
-Max. grinding width 635 mm
-Max. the thickness of the item 133 mm
-Min. thickness of element 0.8 mm
-Min. length item 230 mm
-Grinding Rollers 2 x 152 x 635 mm
-Speed 1400 RPM
-Sanding belt width 600 mm

External dimensions:

-duration-1 100 mm
-width – 1 100 mm
-height – 1 100 mm

-Weight of 332 kg

Grinder DDS-225 are characterized by:

Efficient and extremely durable machine, suitable for continuous operation
Precise position control of the rear of the cylinder allows for fine adjustment of thickness of grinding
Quick change sanding belts
The possibility of applying a sanding belt with a width of 75 and 100 mm
Rubberized surface rollers ensures good results grinding
Tape feed precisely carried out on four massive spindles
Two-speed transmission feed, allows you to find the feed rate to the genre of work piece of wood
Two exhaust ports on the machine with a diameter of 100 mm each, ensure good dedusting (after you connect it to the suction device)
 
Price  
  PL   request
121595001 204

COSTA CT CCT 1350 for sale
Belt grinders


-machine in very good condition -grinding of two parties Technical data: -year of production 2000 -very high quality, sequential -controlled from the desktop -thickness of grinding 3 -160 mm -the machine is  ...

 
-machine in very good condition
-grinding of two parties

Technical data:

-year of production 2000
-very high quality, sequential
-controlled from the desktop

-thickness of grinding 3 -160 mm
-the machine is equipped with five aggregates
-adjustable feed speed on the geared motor
-minimum pressure 6 bars
-feed rate 5-25 m/min

The layout of the aggregates:

1) Lower shaft 15 kW, V tape 20 m/sec
2) Bottom shoe with a power of 11 kW, V tape 16 m/sec
3) upper shaft 15 kW, V tape 20 m/sec
4) upper shaft of the power of 11 kW, V tape 20 m/sec
5) upper shoe with a power of 11 kW, V tape 16 m/sec

-Brushes for machines 2 x 1.1 kW
-feed motor 7.5 kW
-legal engines 2 x 0.55 kW
Turbine motor 5.5 kW
-total power output 87 kW

Nozzle diameters:

1) 160 mm and 2 x 200 mm
2) 4 x 160 mm and 6 x 100 mm

Overall dimensions:

-length: 800 cm
-width: 220 cm
-height 250 cm
-weight 10500 kg
 
Price  
  PL   request
121594994 202

FC-10-MLK FC-10-MLK for sale
Milling machines for pins


MILLING-SINGLE END TENONING MACHINE FC-10-MLK -Machine in stock -After reviewing the technical -VG condition -Year of manufacture: 2009 -Serial number 407 -CE Mark -The Line Connecting Wood Dovetail GOMA  ...

 
MILLING-SINGLE END TENONING MACHINE FC-10-MLK

-Machine in stock
-After reviewing the technical
-VG condition

-Year of manufacture: 2009
-Serial number 407
-CE Mark

-The Line Connecting Wood Dovetail GOMA

-The Line Connecting Wood To Length GOMA

-Double end tenoning machine for micro joints + longitudinal press connecting timber

-THE MACHINE HAS INCLUDED TOOLS SUCH AS CUTTER MICRO SLINGS, PILA CIRCULAR SAW

-THE UNIT HOLDING THE GLUE

Double end tenoning machine FC-10 is designed for processing wood and wood-based materials. You can perform pivots, widlice, dovetail and other shapes at the ends of the Frisians, and staves, etc.

The line consists of:

-mechanical feed drive (movement speed is continuously adjustable)
-pneumatic clamps (clamp width of the top and side)
-circular saw
-Automatic Glue spreader
-top/bottom coverstitch machine
-longitudinal press connecting timber

Technical data of the shapers:

The SAW

-Speed-3000 rpm
Maximum disc diameter 300 mm
-Engine power 3.4 Kw
-Maximum cutting height 140 mm
-Diameter suction fi 80 mm

MILLING MACHINE

-Mandrel diameter 50 mm
-The length of the useful stem 210 mm
-The maximum diameter of 400 mm
-Spindle speed 4000.6000 r-min
-The motor 7.5 kW
-Diameter suction fi 140 mm, 200 mm

Longitudinal press connecting timber + crosscut

The size (dimensions of glued laminated wood)

· width 40/140 mm
· the thickness of 25/40 mm
· the length of the single laminated section 6000 mm
· the force of compression during gluing 7500 kg/100 atm
· air consumption 7 Nm3 (1, 5 m 3 at 6 atm)/h

Press top/bottom coverstitch machine

· tool diameter O300/O30mm
· motor power 1 .5kW

-Hydraulic Power Pack
-silnim 3kw
-tank capacity 40 l
 
Price  
  PL   request
121594984 201

DIMTER OPTICUT 450 SUPER for sale
Circular sawing automats


-Machine in stock -Perfect Condition -Year of manufacture: 2008 -Feeding speed 300 m/min Min. nominal cross section of 30 mm x 12 mm Min. Inlet length of 500 mm Min. inflowing with automatic loading length of 900 ...

 
-Machine in stock
-Perfect Condition
-Year of manufacture: 2008
-Feeding speed 300 m/min

Min. nominal cross section of 30 mm x 12 mm
Min. Inlet length of 500 mm
Min. inflowing with automatic loading length of 900 mm
Max. length: 6300 mm added
Max. feed speed of 300 m/min
Cutting accuracy of up to 1 m long cutting +-0.8 mm
Cutting accuracy to 2.5 m in length cutting + 1, 5 mm
Min. cutting length/at the end of the 110 mm detail – 180 mm

equipment:

• VarioSpeed
• Servo
• Constant cutting length/removal of defects
• Full optimization max. The length of the added:
fixed and variable length up to 8 features 16 groups > 100.000 lengths
• Patented efficient waste gate
• Automatic sorting in 8 sections

The entire unit (line) consists of the following stations and bands:
1) 3 pieces solid roller conveyors to the marking on the roller conveyor to the marking with chalk are marked with the quality and defects of wood. Then the wood, sometimes marking up is moved to the next, raised roller conveyor. Adjustable mirror allows you to view the bottom of the page.

2) 3 returning roller conveyors after marking the position of the spots marking the wood is moved on the roller conveyor and set face on its edge. Then the wood is dropped on the transport chain.

3 transversal conveyor Chain conveyor with) the transverse wood moves up into the side of the Guide. Transverse transport meets the role magazine buffer. Roll-up and leans retrieving Auger picks up the wood of the cross conveyor. The upper roller deteriorates and wood, using roller guides is to bring the side Guide to the next measuring station with the scanner.

4) length measurement with fluorescent

5 lateral Conveyor transverse chainsaw)

6) Optymalizacyjna cross saw OptiCut 450 Super

7) output Conveyor Belt/sorting station

A series of DimterLine the fastest optymalizerki cross offers 450 OptiCut for all requirements of the industry. Positioning with lightning speed, cutting, sorting-and all this with maximum use of wood. Modern plants need this performance in the cutting length, cutting defects and optimization. This saw is not only the fastest but also the most reliable, accurate and extremely user friendly. Just set the machine and immediately produce – economically and with the highest performance also in continuous operation. The technology leader in machines with DimterLine make it possible.
 
Price  
  PL   request
121594978 203

WEINIG PROFIMAT P 23 E for sale
Four-sided planing machines


-machine in stock -After reviewing the technical -very good condition -year of production 1999 TECHNICAL PARAMETERS: -planing width 230 mm -planing height 140 mm -spindle diameter 40 mm – four heads -6000  ...

 
-machine in stock
-After reviewing the technical
-very good condition
-year of production 1999
TECHNICAL PARAMETERS:

-planing width 230 mm
-planing height 140 mm
-spindle diameter 40 mm

– four heads
-6000 RPM spindles

-bottom spindle 4 kW
-left and right spindles 7.5 kW
-upper spindle 4 kW
-height adjustment engine 0.37 kW
-feed motor 2.2 kW
-the length of the table initial 197 cm
-possibility of mounting the blades leading the side heads

-four top steel roller
-one upper rubber roller

-one rubber roll counter
-central lubrication
-feed rate adjustable
-feeding speed of 5-24 m/min

Overall dimensions of the machine:

-length: 340 cm
– width 200 cm
-height 190 cm
-weight 2000 kg
 
Price  
  PL   request
121588956 1403

water tank cistern rapeseed oil tank for sale
P83 polypropylene-tank 12,000 L double-walled


P83 - used appr. 12 m³ / 12,000 litres polypropylene tank, aboveground, standing vertically, double-walled, flat-bottomed, in good condition. volume: appr. 12 m³ / 12,000 litres material: polypropylene dimension ...

 
P83 - used appr. 12 m³ / 12,000 litres polypropylene tank, aboveground, standing vertically, double-walled, flat-bottomed, in good condition.

volume: appr. 12 m³ / 12,000 litres
material: polypropylene
dimensions:
inner tank Ø appr. 2.35 m x height appr. 2.85 m
outer tank Ø appr. 2.55 m x height appr. 2.40 m

Polypropylene tank, aboveground, vertically standing tank with a flat bottom, double-walled, dome on the top, multiple connections, in- and outlets. Tank as shown on the pictures.

For media with a specific weight of up to 1.53 kg/l.

The container can be used as a storage tank for water, feedstuff, liquid feed, manure, seeping juice, rapeseed oil, or as a rainwater tank, water cistern and much more.

Price upon request.

Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us.

More information and offers on our site:
profi-tanks(dot)de
 
Price  
    request
121578401 209

JENZ HE 250-800 STA for sale
Wood crushing machines


-machine in stock -After reviewing the technical -very good condition -ideal for railroad -year of manufacture 1996 -documentation on DTR -Certificateof Hygienic CE Technical characteristics:-maximum height  ...

 
-machine in stock
-After reviewing the technical
-very good condition

-ideal for railroad
-year of manufacture 1996

-documentation on DTR
-Certificateof Hygienic CE

Technical characteristics:-maximum height 250 mm
-maximum width of 800 mm

-main engine 75 kW
-feed motor 2 x 3 kW

-rotor diameter 500 mm
-the rotor length 830 mm
-the rotor segment

-16 blades on the rotor
-two sieves fi 28 mm and 40 mm

– three upper shafts extending gear
-1 shaft dony pulling serratus
-feeder track with a length of 180 cm

-hydraulic lift cover
-electrical box
-pick up wood chips from the bottom of the

Overall dimensions of the machine: – length 400 cm
-width: 170 cm
-height 150 cm

-weight 3000 kg
 
Price  
  PL   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter