british flag
Resale Logo

Boring used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information warehouse systems  LHS Vertriebsgesellschaft mbH  http://www.lhs-online.com 
banner logo
start page > keywords Boring > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465503 101

MORI SEIKI MV-45/40 for sale
Milling machine centers


OVERVIEW: Brand: MORI SEIKI Model: MV-45/40 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 1986 Production hours: 28000 Location: Netherlands Origin country ...
used machine
 
OVERVIEW:
Brand: MORI SEIKI
Model: MV-45/40
Application type: Milling
Machine type: Machining Center
Availability: Immediately
Construction year: 1986
Production hours: 28000
Location: Netherlands
Origin country: Japan

GENERAL DATA:
Measurements width: 3800 mm
Measurements depth: 3500 mm
Measurements height: 3150 mm
Machine weight: 8000 kg

MAIN DRIVE:
Number of spindle: 1
Spindle speed range: 6000 1/min

CONTROL UNIT:
Brand: Fanuc
Model: 11M

MOVEMENT:
X-AXIS movement: 800 mm
Y-AXIS movement: 460 mm
Z-AXIS movement: 510 mm

WORKPIECE:
Workpiece drm: 160 mm
Workpiece weight: 1000 kg

TABLE:
Outer length: 1200 mm
Outer width: 460 mm

TOOLS:
Max weight: 20 kg
Max tool diameter: 95 mm
Max tool length: 300 mm

MEDIA:
Main electronic connection: 380 V
Power consumption: 22 kVA
Chip conveyer: yes
Internal cooling: yes
1986
Price  
  NL   request
125459203 102

MORANDO KN 25 for sale
Vertical Turret Lathe - Double Column


faceplate diameter:2500 mmswing diameter:2700 mmturning height:2400 mmtable motor:80 kWtable rotation speed:1,24-112 U/mincross section of ram:250 x 250 mmTravel of Ram (vertical):1500mm und 1140 mmweight of the machine  ...
used machine
 
faceplate diameter:2500 mm
swing diameter:2700 mm
turning height:2400 mm
table motor:80 kW
table rotation speed:1,24-112 U/min
cross section of ram:250 x 250 mm
Travel of Ram (vertical):1500mm und 1140 mm
weight of the machine ca.:48 t
chip conveyor:
grinding attachment:2
Boring bar holder:
turret:
Rams:2 Stück CNC gesteuert
operator platform:

Standard accessories: Chips Conveyor & Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication in Guide way 4 Jaw Manual Chuck 1000mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Tower Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System installed options: Air Conditioner For Electrical Box Coolant Through Spindle Filter Of Coolant Water CE Mark Transformer
1971
Price  
    request
125465495 101

CONTI-LAZZATI AFN120 (CNC) for sale
Borers horizontal - table


Transversal table travel - X-axis: 6000 mmNichter spindle way - y axis: 2950 mmTyp longitudinal travel â Z axis: 700 mm spindle spindle - W-axis: 600 mm Description: The machine is in good technical condition, by ...
used machine
 
Transversal table travel - X-axis: 6000 mmNichter spindle way - y axis: 2950 mmTyp longitudinal travel â Z axis: 700 mm spindle spindle - W-axis: 600 mm
Description:
The machine is in good technical condition, by prior arrangement, the opportunity to test. Boring machine with mobile stand head section: HB130 Lazzati CNC type: CNC Fanuc 31i delete axes: Accessories: 1 turntable 1 conveyor chip (meta) 1 work platform operator 1 tank of coolant preparation for the manual Assembly of the Burs plate motorized () 8000x3700x400mm) switch according to CEI-IEC telescopic covers hydraulic clamping work area axis V (longitudinal turntable): 1250 mm axis A - rotation 360 (engine) maximum diameter on the table: 5000 mm rotary table dimensions: 2250x1800mm maximum table load: 14 Tons of 1250 mm. stroke V: feeds axis V 1 ÷ 1000 mm / min, rapid V-axis: 1000 mm / min table rotation speed: 0.3 rpm / min positioning table: 4 x 90 (variable manually) work feed axis XY: ball screw work feed (x) 5 ÷ 1000 mm / min fast (X): 2000 mm / min A rbeitsvorschub (Y): from 5 to 1000 mm / min fast (Y): 3000 mm / min feed of work (WZ): 5 ÷ 1000 mm / min technical data sheet
1977
Price  
    request
125447285 101

TOS WH 105 CNC for sale
Table Type Boring and Milling Machine


spindle diameter: 105 mmx-travel: 1800 mmy-travel: 1250 mmz-travel: 1250 mmw-travel: 630 mmsurface area: 1400x1400 mmspindle taper ISO: 50 turning speed range - power take off spindle: 4000 U/minmain spindle power: 28 kW ...
used machine
 
spindle diameter: 105 mm
x-travel: 1800 mm
y-travel: 1250 mm
z-travel: 1250 mm
w-travel: 630 mm
surface area: 1400x1400 mm
spindle taper ISO: 50
turning speed range - power take off spindle: 4000 U/min
main spindle power: 28 kW
weight of the machine ca.: 15 t
dimensions of the machine ca.: 6,2x3,6x3,4 m
CNC Control: HEIDENHAIN iTNC 530



This ad was created with MODUL MWS - the software solution of LogoTech.
2006
Price  
    request
125465491 101

MAHO MAT 500 for sale
Machining Centers (vertical)


Control system: Deckel MAHO The machine is in good technical condition, by prior arrangement, the opportunity to test. The machine has a hacker with a conveyor.
used machine
 
Control system: Deckel MAHO
The machine is in good technical condition, by prior arrangement, the opportunity to test. The machine has a hacker with a conveyor.
 
Price  
    request
125447273 103

SHW UF 1 for sale
Universal Milling Machine


x-travel: 550 mmy-travel: 350 mmz-travel: 420 mmturning speeds: 46-2110 U/minspindle taper ISO: 40 boring spindle: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThis ad was cr ...
used machine
 
x-travel: 550 mm
y-travel: 350 mm
z-travel: 420 mm
turning speeds: 46-2110 U/min
spindle taper ISO: 40
boring spindle:
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m



This ad was created with MODUL MWS - the software solution of LogoTech.
1983
Price  
    request
125465425 101

DECKEL DC 45 for sale
Processing Centers


Horizontal machining center cover DC 45 â?¢ n = 6000U/min â?¢ SK 50 â?¢ Internal coolant feed 50 bar â?¢ Auto. Tool changer 160 fold â?¢ 14 pallets 630 500mm  ...
used machine
 
Horizontal machining center cover DC 45
â?¢ n = 6000U/min
â?¢ SK 50
â?¢ Internal coolant feed 50 bar
â?¢ Auto. Tool changer 160 fold
â?¢ 14 pallets 630 500mm
â?¢ Including tools and recording
â?¢ Fully functional, operational at all times
â?¢ Editing only aluminium and bronze
â?¢ Price negotiable
â?¢ Visit at any time by appointment
 
Price  
    request
125447275 103

SHW UF 2 for sale
Universal Milling Machine


x-travel: 1120 mmy-travel: 300 mmz-travel: 540 mmturning speeds: 46-2110 U/minspindle taper ISO: 40 boring spindle: slotting head: digital readout: Acurite total power requirement: kWweight of the machine ca.: 3,5 tdi ...
used machine
 
x-travel: 1120 mm
y-travel: 300 mm
z-travel: 540 mm
turning speeds: 46-2110 U/min
spindle taper ISO: 40
boring spindle:
slotting head:
digital readout: Acurite
total power requirement: kW
weight of the machine ca.: 3,5 t
dimensions of the machine ca.: 2,1x1,8x1,8 m



This ad was created with MODUL MWS - the software solution of LogoTech.
1970
Price  
    request
125465382 101

DMG DECKEL MAHO DMC 50 V for sale
Numerically Controlled Machining Centres


Machining center - vertical DECKEL MAHO DMC 50 V bearing no 1105-01865 category machining center - vertical make DECKEL-MAHO type DMC 50 V year 1995 State second-hand machine control CNC dialog 112 storage France country ...
used machine
 
Machining center - vertical DECKEL MAHO DMC 50 V bearing no 1105-01865 category machining center - vertical make DECKEL-MAHO type DMC 50 V year 1995 State second-hand machine control CNC dialog 112 storage France country of origin Germany
Delivery time immediately cargo base EX WORK technical details x way 500 mm y way 420 mm z trail 500 mm control dialog 112 table size 1 table: 700 x 400 mm speed range - milling power 0-15000 rpm tool holder SK 40 - Milling spindle 15 kW who kzeugwechsler - places: 30 stations feed range 1-10000 mm / min rapid traverse x and Y-axis 30 m / min rapid traverse Z axis 20 m/min total power 25 kW machine weight 7000 kg space requirement approx. 3400 x 3400 x 2900 mm accessories electronic hand wheel conveyors Centre ralschmierung RS 232 data interface coolant system complete machine documentation work light description with control dialog 112
BEAUTIFUL MACHINE

1995
13,000 €  
    request
125447279 101

TBT T61-1000 for sale
Deephole Boring Machine


core drilling diameter max.: 60 mmbore depth: 1000 mmswing diameter: . mmtotal power requirement: 50 kWweight of the machine ca.: tdimensions of the machine ca.: mThis ad was created with MODUL MWS - the software solut ...
used machine
 
core drilling diameter max.: 60 mm
bore depth: 1000 mm
swing diameter: . mm
total power requirement: 50 kW
weight of the machine ca.: t
dimensions of the machine ca.: m



This ad was created with MODUL MWS - the software solution of LogoTech.
1981
Price  
    request
125465282 101

DECKEL MAHO SMC 50 V for sale
Processing Centers


Machining center Manufacturer: Lid MAHO Type: SMC 50 V Year of construction: 1996 Clamping table 700 x 400 Control: CNC 3D path control dialog 112 15000 rpm Magazine 20 tools. Contact person Mr. Muel ...
used machine
 
Machining center

Manufacturer: Lid MAHO
Type: SMC 50 V
Year of construction: 1996

Clamping table 700 x 400

Control: CNC 3D path control dialog 112

15000 rpm

Magazine 20 tools.

Contact person Mr. Mueller see also our over 200 more deals at.

(Changes and errors in the technical data, information
and prices and subject to prior sale!)
1996
Price  
    request
125447245 205

CMS TRIAX 5 for sale
CNC Machining Center


Weight approx.: 8000 kgDimensions (l x w x h) approx.: 6000 x 3900 x 2760 mmDescription: Operating area 3500 x 1500 mm It follows CE regulations ? with documents Vertical pantograph 12 HP 8 tool changers ? leading edge H ...
used machine
 
Weight approx.: 8000 kg
Dimensions (l x w x h) approx.: 6000 x 3900 x 2760 mm
Description: Operating area 3500 x 1500 mm It follows CE regulations ? with documents Vertical pantograph 12 HP 8 tool changers ? leading edge Horizontal pantograph ? 4th axis aggregate Boring unit, see photo
2002
used machinery auction RESALE 12,000 €  
  IT   request
125465279 202

PADE 1000 N for sale
CUTTING BORING MOULDING machine


AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cut ...
used machine
 
AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N
Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc.
The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices.

composed by 3 working units :
1- Cutting unit
circular saw diam. mm.350
motor power hp 3

2- Boring unit
boring head with 5 / 7 mandrins
motor power Hp 3
max. working stroke of boring unit mm. 130

3- Moulding unit
vertical spindle for moulder
motor power Hp 5,5
spindle diam. mm.30
pneumatic sliding carriage

volt. 380/50
2007
Price  
  IT   request
125442853 110

HECKERT TGL 32-680 for sale
Drilling and boring


 
Price  
  DE   request
125452415 101

DMG DECKEL MAHO DMU 50 EVO for sale
Numerically Controlled Machining Centres


Machining center - universal DMG DECKEL-MAHO DMU 50 EVO / 5-axis bearing no 1105-00930 category machining center - universal make DMG DECKEL-MAHO type DMU 50 EVO / 5 axes built in 2001 State second-hand machine control C ...
used machine
 
Machining center - universal DMG DECKEL-MAHO DMU 50 EVO / 5-axis bearing no 1105-00930 category machining center - universal make DMG DECKEL-MAHO type DMU 50 EVO / 5 axes built in 2001 State second-hand machine control CNC HEIDENHAIN TNC 430 Vidia RT France country of origin Germany delivery immediately cargo base EX WORK technical details x way 500 mm y way 420 mm z-way 380 mm control HEIDENHAIN TNC 430 spindle taper SK 40 speed 18,000 rpm spindle motor 15 kW rapid 50 m / min table on clamping area 500 diameter. x 380 mm feed range up to 20 000 mm / min tool changer 32 x total power consumption 38 kVA machine weight approx. 5.9 t description - CNC - screen control HEIDENHAIN TNC 430 - 5-axis machine with B + C - axis
-Spindle: 19 500 h - a power: 88 000 h - machine documents
2001
59,000 €  
    request
125401430 103

KAISER for sale
Milling Machine Part & Accessory


Weight approx.: 30 kgDimensions (l x w x h) approx.: 530 x 340 x 170 mmDescription: 2 Boring heads KAISER, 1 boring head SW 148 X CKN 6, diameter adjustable 150 to 170 mm, 1 boring head SW 98 XCKN 6, diameter adjustable  ...

 
Weight approx.: 30 kg
Dimensions (l x w x h) approx.: 530 x 340 x 170 mm
Description: 2 Boring heads KAISER, 1 boring head SW 148 X CKN 6, diameter adjustable 150 to 170 mm, 1 boring head SW 98 XCKN 6, diameter adjustable 130 to 150 mm, 2 SK 50 tool holders KAISER SK 50/BTX CKS 6 X 100, indexable inserts etc., see photos for details
 
used machinery auction RESALE 400 €  
  NL   request
125452409 101

DMG DECKEL MAHO DMU 50 for sale
Numerically Controlled Machining Centres


Machining center - universal lid MAHO DMG DMU 50 5-axis 3 + 2 bearing no 1105-00660 category machining center - universal make lid MAHO DMG type DMU 50 5-axis 3 + 2 year 2005 State second-hand machine control CNC HEIDENH ...
used machine
 
Machining center - universal lid MAHO DMG DMU 50 5-axis 3 + 2 bearing no 1105-00660 category machining center - universal make lid MAHO DMG type DMU 50 5-axis 3 + 2 year 2005 State second-hand machine control CNC HEIDENHAIN ITNC 530
Storage location France country of origin Germany delivery immediately cargo base EX WORK technical details x way 500 mm y way 420 mm z-way 380 mm control HEIDENHAIN ITNC 530
Recording SK 40 10000 rpm 1/min table surface 500 X 380 MM mm description HEINDENHAIN ITNC 530
Controlled NC round swivel table, 2 axle coolant system,
Full cabin,
10000 RPM
Magazine 16 professional SK 40

2005
55,000 €  
    request
125386425 1900

MAZAK for sale
7 Boring Bar Holder Multiplex


Weight approx.: 80 kgDimensions (l x w x h) approx.: 800 x 500 x 500 mmDescription: Suitable for a MAZAK machine, holder diameter 50 mm, identification number: 864.0487, for further details see pictures

 
Weight approx.: 80 kg
Dimensions (l x w x h) approx.: 800 x 500 x 500 mm
Description: Suitable for a MAZAK machine, holder diameter 50 mm, identification number: 864.0487, for further details see pictures
 
Price  
  DE   request
125452253 101

ELHA FBM 2700 for sale
Drilling And Boring Machines


FLANGES - drill ELHA FBM 2700 - 02-99-002 delivery time: immediate number: 02-99-002 manufacturer: ELHA type: FBM 2700 MACHINE data year: approx. 1984 L x W x H: CA. 3500 x 1500 x 2600 mm weight: approx. 5500 kg GO ...
used machine
 
FLANGES - drill ELHA FBM 2700 - 02-99-002 delivery time: immediate number: 02-99-002 manufacturer: ELHA type: FBM 2700

MACHINE data year: approx. 1984 L x W x H: CA. 3500 x 1500 x 2600 mm weight: approx. 5500 kg

GOOD GENERAL CONDITION

TECHNICAL DATA FLANGE BORHMASCHINE
Maximum drilling diameter steel: approx. Ã? 52 mm max drilling diameter in cast: approx. Ã? 60 mm tool holder: MK 5 Max swing: approx. Ã? 2700 mm speed range: approx. 20-1400 RPM projection: approx. 500-1200 mm traverse path Y - axis (manual): approx. 700 mm max. Height: approx. 600 mm Quill stroke: approx. 300 mm Tischaufspannï¬?äche: approx. Ã? 1250 mm power: 15 kW automatic drill bit feed: approx. 0.1 - 0.35 mm / U thread cutting performance: M 36 accessories â?¢ motor part Setup (hole number 2 - 48 holes / core (g) manually / feed & express gear â?¢ 3 - bake - chuck Ã? 500 mm â?¢ incl. 1 set of JAWS

â?¢ Manual / automatic - operation â?¢ right / left rotation â?¢ central lubrication â?¢ thread cutting device â?¢ emergency â?¢ coolant system â?¢ work lamps â?¢ drill depth stop â?¢ hand crank Y - adjustment

Accessories on request price and other specifications on request
1984
Price  
    request
125366537 202

SIMAL S 2000 CNC for sale
CNC Milling Boring Machine


Weight approx.: 1800 kgDimensions (l x w x h) approx.: 3900 x 1700 x 2100 mmDescription: Serial number 146, 1 vertical milling head, motor 1.83 kw, rotation speed up to 12000 rpm, 2 horizontal milling heads, motor 0.80 k ...
used machine
 
Weight approx.: 1800 kg
Dimensions (l x w x h) approx.: 3900 x 1700 x 2100 mm
Description: Serial number 146, 1 vertical milling head, motor 1.83 kw, rotation speed up to 12000 rpm, 2 horizontal milling heads, motor 0.80 kw each, rotation speed up to 12000 rpm, 2 pneumatic horizontal clamps and 3 vertical ones, Maximum heads travel approx. 2300 mm
1993
used machinery auction RESALE 850 €  
  ES   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Horizontal boring machine TOS H100 A


X - the table is transversal, 1250 mm Y - spindle turret upright, 1000 mm Z - table longitudinally, 1250 mm W - spindle extension, 900 mm Spindle diameter, 100 mm Morse spindle cone execution 6 Power of the drive of the main motion, 7,5 kW Working surface of the table, 1250x1250 mm Capacity of the table, 3000 kg The speed of rotation of the flatbed, 0.8 ... 800 rpm Overall dimensions of the machine (LxBxH), 6000 x 3700 x 3000 mm Total machine weight 13500 kg

Boring Mills TOS Varnsdorf W9


Horizontal boring machine W9 TOS Varnsdorf K.102259 Diameter of working spindle mm 90 Depth of working spindle mm 710 Vertical spindle adjustment mm 900 (1120) Spindle speed: number of degrees 21 range min-1 14-400 Spindle speed with removable faceplate number of degrees 18 range min-1 28-1400 Speed of the face plate number of degrees 12 range min-1 14-180 Working feeds: 18 degrees in the mm / rev range 0.016-0.8 18 degrees in the range of mm min-1 12.5-600 Micro-axis mm min-1 5 Rapid traverse mm min-1 2400 Threads: 18 metric with pitch mm 0.25-12 24 Whitworth threads / 1 "120-2 Electric motor kW 7.5 Machine dimensions: length mm 3900 (4750, 5120) width mm 2500 (2600) Height mm 2650 (2875)

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Electric discharge drill - a puncher for holes BAOMA BMD 703


With drill-electric boring machine for hole BMD 703 was produced in 2007. The drill is new, unused. Technical data of the machine BMD 703: -the maximum drilling depth: up to 400 mm -diameter of (drilled) hole: fi 0,5-4 mm -working table dimensions: 400 x 320 mm -height, material thickness: 270 mm -burning time (drill) hole with a diameter of 1 mm, depth 100 mm: approx. 3 min. -power supply: 380 V, 50 Hz

Vertikal Turning Machines (Lathes) ?KD BLANSKO SKJ 50-100


Producer ..... CKD BLANSKO - OS Year manufacture/Year overhaul ..... 1993 / 2006 Control system Siemens ..... Sinumerik 840 D Max. diameter of workpiece ..... 10000 mm Clamping diameter of rotary table ..... 4770 mm Max. workpiece height ..... 4240 mm Max. load of table ..... 100 000 kg Machine weight ..... 121000 kg Machine dimensions l x w x h ..... d 15910 x š 10600 mm retrofit 2006 - Siemens 840D CNC system - C axis: conversion for use with boring and milling tools - new drives - new electricity (switchboard, ...) - new central lubrication - CAPTO clamping milling head: 1.000 U/min chip conveyor

Boring Mills STANKOIMPORT 2L614


Boring machine STANKOIMPORT 2L614 produced in 1978. The machine is equipped with measuring, and has upgraded partly electronic. Technical data of boring STANKOIMPORT 2 l 614: -spindle diameter: 80 mm -table dimensions: 800 x 1000 mm -the maximum workpiece weight: 1000 kg -spindle speed: 20-1600 min -engine power: 4.5/6.7 kW -dimensions of the machine: ok. 4300 x 2200 x 2800 mm -weight: 7000 kg

Traveling column milling machine MECOF CS 88 MT


1995 bi-rotary head control SELCA 1200 Racing: X 6200mm; · Y 1000 mm; Z 1800mm (turning his head 2100 mm) N 2 teams N 2 cubic N 1 divider continuously N 1 head D 'ANDREA from Ø100mm to Ø250 mm N 1 head D 'ANDREA from Ø250mm to Ø700 mm N 50 taper to milling cutters, boring tools and drills N 25 cutters from Ø 40mm to Ø250 mm

Plastic injection machines LIANSU L-26


PVC pipe production line LIANSU L-26 (1992-2012) is a homogeneous tube. PCV line LIANSU L26 consists of: -boring machine LIANSU/LSE 92 188 -vacuum CINCINNATI/VA630-6 -cooling bath CINCINNATI/SP630-6 -cooling bath CINCINNATI/SP630-6 -extraction of CINCINNATI/C800 -saw CINCINNATI/TRS110-800 -CINCINNATI/BA. CA. 1T110-630 Technical data: -production performance: 300-600 kg -capacity: 200-630 mm

Numerically Controlled Machining Centres MORBIDELLI M100


Full equiped demo 5 axis CNC working center for drilling, routing and cutting. - year of production 2018 - boring unit 31 borers - 5 axis agregate 10 kW - HSK F63 max. 24.000 r.p.m. - Xilog Maestro software - PRO-SPACE SAFETY SYSTEM - working dimensions 3110x1620x180 mm - Z axis hood - 560 mm, clearance 180 mm - TECpad remote control - 2 pc tool changer, TBR11 linear + fast 14 beside motor - total 25 - 4 lifting assistance device - pods 145x145 12 pc - rotating pods 145x55 mm 6 pc - vacum pump becker 250 m3/h Machine has been used around 20 working hour.VERY GOOD PRICE FOR DEMO MACHINE!

Lathe VDF BOEHRINGER V 800NC-II


Max. spindle torque: 10000Nm, rotational speed: 5.6-1120/min, feed rate: 0.001-8000mm/min, rapid traverse: 8000mm/min, boring force: 20kN, quill diameter: 125mm, quill stroke: 280mm, chuck diameter: 630mm, control: B32T, including accessories.

Numerically Controlled Machining Centres BIESSE ROVER C6.65R


Machining centre Biesse Modello Rover C6.65 R Software BIESSE WORKS Working field X mm 6200 Working field Y mm 1535 Working field Z mm 250 Work table with automatic adjustment of bars supports and sucker holder carriages 08 working areas 10 bar supports with 4 sucker holder carriages 40 Uniclamp sucker holder carriages Suction cups included: 06 of mm 140x75 20 of mm 140x140 10 of mm 140x55 18 Fittings blocks 01 Electro-spindle at 4 axels of 12 kW 01 boring head 22 spindles composed by 13 vertical spindle + horizontal spindle + 1 blade 03 Multi-function heads composed by: 01 Saw blade unit diameter mm 300 01 Boring unit at 6 counterposed bits 01 Milling unit at 2 exits Automatic chain Tool change at 22 positions installed on the machine Depression plant with vacuum pump of 250 m3/h Automatic centralized lubrication Shaving evacuation belt

Knot Boring and Plugging Machine RAIMANN A 20


Number of aggregates 2, max. bar-/ plug magazine tool diameter: 18-35/ 15-30mm, max. workpiece diameter: 200mm, max. drilling, milling and punching depth: 22mm, output: 18cycles/min, table dimensions: 950x750mm, weight: 1,25t, number of available machines: 2.

Horizontal Boring Machine STANKO 2A637GF1 , Ø160mm


spindle Ø 160mm., table 1600x1800mm , X 2000mm., Y 1600mm., Z 1000mm., longitudinal travel 1600mm., weight 36,35 ton.

Measuring Machines POLI SPA


TYPE precision jig boring machine CROSS TRAVEL 1400 mm. AXIS X 3000 mm. 1600 mm VERTICAL STROKE. NOTES Plan 3000 x 1500 mm. -# 6 support columns and leveling

Vertikal Turning Machines (Lathes) Stanko Ø8000 x 3240 x 125 T


Technical characteristics. The largest diameter of the workpiece - 8000 mm The greatest height. workpiece - 3240 mm The diameter of the disc table - 7100 mm The biggest shift sliders rests vertical (right and left) - 2000 mm The highest levels of vertical travel of the slides (right and left) - 4400 mm Mileage axis slider slides off the center of the shield handle - 150 mm Vertical rotation angle bracket right - -15 ° - 30 ° Vertical rotation angle bracket left (combined) - -15 ° - 30 ° Sliding horizontal slider bracket side - 1250 mm Vertical travel of the slider carriage side - 2,800 mm Maximum weight of the workpiece at a speed table to 15.5 rev / min - 125 tons Maximum weight of the workpiece at any speed - 63 tons The speed range of the table - 0.23 - 19,3obr / min * The largest total cutting force - 160 kN The biggest moment of cutting - 400 Nm Range of feed carriages vertical and horizontal - 0.0352 - 275mm / min The feed rate accelerated sliders and carriages - 2400 mm / min The speed of the beam - 300 mm / min Main engine power - 25 kW Lifting capacity of the crane - 75 ton Suport combined (slide left) Boring spindle diameter - 125 mm Spindle stroke - 1000 mm Maximum torque of the spindle - 3500 Nm Spindle speed n - 20 - 650 r / min Number of degrees of speed spindle - 16 Max-min vertical feed spindle - 0.0352 - 215mm / min The rate accelerated feed spindle - of 2400 mm / min Shift the slider to slide in the y-axis - 2000 mm Feed range slider and bracket Min - 0.0352 mm / min Max - 285 mm / min The feed rate accelerated slider and slide - 2400 mm / min The greatest strength of the cutting blade when running from the front bracket L <= 1000 mm - 80 kN L <= 1700 mm - 50 kN L <= 2300 mm - 30 kN The extreme angles of rotation slide - -15 ° - + 30 ° The electric motor drive main spindle - 10 kW Max spindle feed force - 30 kN Cone Size spindle DIN 2080 - Metric 80

CNC Boring Mills TITAN PAMA AFP 200


TYPE AFP 200 CNC – PAMA LICENCE - MACHINE TECHNICAL SPECIFICATION - Boring spindles diameter: 200 mm - Boring spindles taper: ISO-50 - Boring spindles speed: 1500 rpm - Main motors power: 100 kW - Rams section: 530 x 600 mm - Max. machining length: 19200 mm - Column 1 max. travel (X1 axis): 12800 mm - Column 2 max. travel (X2 axis): 12800 mm - Headstock 1 travel (Y1 axis): 4000 mm - Headstock 2 travel (Y2 axis): 5000 mm - Boring spindle travel (Z axis): 1100 mm - Ram travel (W axis): 900 mm - Travel Z + W: 2000 mm - Feeds on X, Y and Z axis: 0 – 8.000 mm/min - Feed on W axis: 0 – 6000 mm/min - Approx. weight without fix and rotary tables is about 210 t NOTE: 1. The max working extension of Z axis without ram (W axis) is 1100 mm. 2. The machine will work as a tandem unit and totally independent columns as well. STANDARD EQUIPMENT: - GE FANUC 16i-MB CNC - GE FANUC servo / spindle motors and drives - HEIDENHAIN linear measuring system on X, Y axis; - HEIDENHAIN rotary encoder on W axis; - GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment - ATOS, MP FILTRI, MARZOCCHI hydraulic equipment - METAL GENNARI telescopic covers on X axis - METAL GENNARI chip conveyor - Universal milling head (manual) type TU-80 – 2 pcs. - Fix tables 6000x2000 mm – 6 pcs. - Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) – 1 pc. - Displaceable rotary table type MRD 2000x2400/2500 mm (30 tones) – 1 pc

CNC Boring Mills TITAN PAMA AFP 200


TYPE AFP 200 CNC – PAMA LICENCE - MACHINE TECHNICAL SPECIFICATION - Boring spindles diameter: 200 mm - Boring spindles taper: ISO-50 - Boring spindles speed: 1500 rpm - Main motors power: 60 kW - Rams section: 530 x 600 mm - Max. machining length: 19200 mm - Column 1 max. travel (X1 axis): 12800 mm - Column 2 max. travel (X2 axis): 12800 mm - Headstock 1 travel (Y1 axis): 4000 mm - Headstock 2 travel (Y2 axis): 6200 mm - Boring spindle travel (Z axis): 1100 mm - Ram travel (W axis): 900 mm - Travel Z + W: 2000 mm - Feeds on X, Y and Z axis: 0 – 8.000 mm/min - Feed on W axis: 0 – 6000 mm/min - Approx. weight without fix and rotary tables is about 210 t NOTE: 1. The max working extension of Z axis without ram (W axis) is 1100 mm. 2. The machine will work as a tandem unit and totally independent columns as well. STANDARD EQUIPMENT: - GE FANUC 31i-MB CNC - GE FANUC servo / spindle motors and drives - HEIDENHAIN linear measuring system on X, Y axis; - HEIDENHAIN rotary encoder on W axis; - GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment - ATOS, MP FILTRI, MARZOCCHI hydraulic equipment - METAL GENNARI telescopic covers on X axis - METAL GENNARI chip conveyor - Universal milling head (manual) type TU-80 – 2 pcs. - Fix tables 4000x2000 mm – 12 pcs. - Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) – 1 pc. - Adapter L600mm pcs.2 - Universal milling head 20kW – pcs.2

CNC Boring Mills WMW UNION BFK 150


Type: CNC SIEMENS 840 D STROKE: 3000 mm. LONGITUDINAL STROKE: 1000 mm. Vertical stroke: 2000 mm. QUILL STROKE: 900 mm. Taper: ISO 50 SEATPOST DIAMETER: Ø 150 mm. Bed sizes: 1600 x 2000 mm.

Drilling And Boring Machines Tailift TRP-1600H


Dai.of column: 432 mm Distance from column surface to spindle center , Max: 1580 mm Distance from column surface to spindle center , Min: 440 mm Travel of spindle head: 1140 mm Distance from base surface to spindle end , Max: 1600 mm Distance from ba ...

Horizontal Boring And Milling Centres For Cubical Heckert CWK 500D


Used horizontal machining center HECKERT CWK 500 d Xmm750 Ymm650 (750) Zmm700 Spindle speed 50-10000 (15000) SIEMENS control Sinumerik 840 D Tool magazine 60 positions pallet changer 2000 CE connected load, visible at work, c ...

CNC Boring Mills Awea A+ 1600


Axis X 1600 mm Axis Y 800 mm Axis Z 800 mm Rotary table (4th axis) CNC FANUC 18i MB Table length 1700 mm Table width 800 mm Max. part weight 2000 kg Automatic feed Number of tool pockets Spindle taper Max. spindle speed 10000 rpm S ...

Tos Skoda W 200 mm Borer


Make: Tos Model: Skoda W 200 mm Borer Condition: Used Machine type: Other Location of machine: Italy Condition info: In good mechanical condition without wear Machine Details Boring Skoda W 200 mm Boring exaggeratedly robust second-hand mach ...

Multi Spindle Drilling Machines Camam FM V-0


Boring machine brand Camam FM model V-0, 2004, Magelis control system built in, with four vertical, two horizontal drilling heads and a head for left and right side. A total of multispindle heads 1 7 single spindle and head to 32 pitch 5-pointed cross hav ...

Multi Spindle Drilling Machines Comec FM/OV 3UF


Branded boring Comec Group S.r.l. model FM/OV 3UF, 2001 built, with 5 horizontal spindles, spindle-spindle head and a side at 6 points, on each side. Used.

CNC Boring Mills Fermat WFC 10


Table horizontal boring mill Producer: Fermat YOM : 2018 Control : Heindenhain TNC 530 Diameter of working spindle : 110 mm Travel X-axis : 2000 mm Travel Y-axis : 1700 mm Travel Z-axis : 1250 mm Spindle travel - W axis : 7 ...

CNC Boring Mills Hurco VMX 42 t


Axes (X/Y/Z) (mm) 1067/610/610 Distance spindle nose- table 150-760 T-Slots (DIN 650) (mm) 5 x 18H8 x 100 Table working surface 1270x610 Max. load (kg) 1360 Spindlespeed max (rpm) 10 000 Spindle motor power (kW) 18 Torque 237/190 Taper (DIN 69871  ...

Multi Spindle Drilling Machines Comec FMMO


Multiple boring and mortising machines, horizontal head crib or similar, Comec FMMO model, brand used.

Drilling And Boring Machines CML FM/1


Multiple boring horizontal, brand CML model FM/1, used.

Multi Spindle Drilling Machines Comec FM/OV


Multiple boring system and marking, Comec brand model FM/OV, used.

Multi Spindle Drilling Machines Comec FFMD/AF


Double boring vertical/horizontal mortiser, with elements of the cradle or similar, Comec FFMD/AF model, brand used.

Multi Spindle Drilling Machines Comec FR/2-1000


Milling and boring machine for Comec cananli "T" brand model FR/2-1000 controlled by PLC, for elements of the cradle or similar, with soundproof booth, marked CE, complete with manual and the Declaration of conformity, used.

Comec FMM OV-1000 CAF


Multiple boring and mortising machines, vertical and horizontal legs of cot or similar, with drill group and the optional added head brand Comec model FMM OV-1000 CAF, branded EC 1997, built, complete with manual and compliance declaration used.

Knoll KTS 25-50-T


Used KNOLL cooling water system with belt filter KTS 25-50-T. Complete with control cabinet, pumps, cooling water tank and hoses. Used for - milling machine - lathe – boring and milling machine.

Boring Mills TOS WHQ 13


Boring Mill TOS model WHQ13 CNC CNC HAIDENHAIN 530 year of manufacture: 2005 – 2006 (little used) Technical details: Table: 1800 X 2200mm X 3500mm Y 2500mm Spindle speed: 2800rpm

Boring Mills KOVOSVIT MAS WKV 100


Distance between columns: 1600 mm Table work surface: 1000 x 1600 mm Maximum workpiece weight: 2000 kg Drive Power kW 4.0 Machine dimensions: 4320 x 3120 x 3313 mm Weight: 16.000 kg The machine is in good condition, it has tools and accessories. Ye ...

Boring Mills SKODA WD200


for sale is two bed section from WD200, leng is 3000mm each and slideunder column

Multi Spindle Drilling Machines SCM TOP 29


Code: 0344 Brand: SCM Model: TOP 29 - CE Standard Multi boring machine with 29 chucks - CE Standard Powered tilting boring group 0-90 degrees N° 29 chucks with quickrelease couplings Centre distance between chucks mm 32 Max width of pane ...

Boring Mills UNION PR 160


Floor horizontal boring mill Producer: UNION YOM : 2007 GO : 2018 Control : Siemens Sinumeric 840 D Diameter of working spindle : 162 mm Travel X-axis : 11000 mm Travel Y-axis : 3000 mm Spindle travel - W axis : 700 mm R ...

Boring Mills TOS W 100 A


Table type horizontal boring mill Producer : TOS Model : W 100 A YOM : 1980 , GO : 2001 Diameter of working spindle : 100 mm Travel X-axis : 1600 mm Travel Y-axis : 1120 mm Travel Z-axis : 1250 mm Spindle travel - W axis : 900  ...

Boring Mills Fermat WFT 13


table horizontal boring mill Producer: Fermat YOM : 2018 Control : Fanuc 31iB Diameter of working spindle : 130 mm Travel X-axis : 3000 mm Travel Y-axis : 2500 mm Travel Z.axis : 1500 mm Spindle travel - W axis : 730 mm  ...

Boring Mills TOS WHQ 13


Technical data Rotary table :1800x2200 mm Sindle travel:800 mm Table travel X:5000 mm Column travel Y:2000 mm Head vertical travel Z:3000 mm Spindle taper:ISO 50 Spindle speed:3000 RPM Spindle motor power: 37KW  ...

CNC Boring Mills Fermat W 150 P


Floor horizontal boring mill Producer: Fermat YOM : 1988 GO : 2017 Control : Heindenhain TNC 530 Diameter of working spindle : 150 mm Travel X-axis : 8500 mm Travel Y-axis : 3800 mm Spindle travel - W axis : 1000 mm Ram  ...

CNC Boring Mills Fermat WRF 160


Floor horizontal boring mill Producer: Fermat YOM : 2018 Control : Siemens 840 DSL Diameter of working spindle : 160 mm Travel X-axis : 6200 mm Travel Y-axis : 5000 mm Travel Z-axis : 1200 mm Spindle travel - W axis : 1000  ...

CNC Boring Mills Fermat WFT 13R


Table horizontal boring mill Producer: Fermat YOM : 2018 Control : Heindenhain TNC 530 Diameter of working spindle : 130 mm Travel X-axis : 5000 mm Travel Y-axis : 2500 mm Travel Z-axis : 1500 mm Spindle travel - W axis : 7 ...

CNC Boring Mills Fermat WRF 150


Floor horizontal boring mill Producer: Fermat YOM : 2011 Control : Heindenhain TNC 530 Diameter of working spindle : 150 mm Travel X-axis : 10500 mm Travel Y-axis : 5000 mm Spindle travel - W axis : 1000 mm CNC rotary table ...

CNC Boring Mills Fermat WRF 150


Floor horizontal boring mill Producer: Fermat YOM : 2010 Control : Heindenhain TNC 530 Diameter of working spindle : 150 mm Travel X-axis : 6200 mm Travel Y-axis : 4000 mm Spindle travel - W axis : 1000 mm CNC rotary table  ...

Boring Mills TOS VHN 13.8


Used TOS VHN 13.8. CNC horizontal boring and milling machine Year 2001. Complete with Heidenhain TNC 530 CNC control Technical data: Spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 10 - 1800 rpm Movements: X-axis: 3500 mm Y-ax ...

CNC Boring Mills TOS FUQ 150


CNC Horisontal Borrer TOS KIRIM Model: FUQ 150-FR/7 Year: 2012. Control Heidenhain iTNC530 7 axis controlled X: 6000 mm. Z: 3500 mm. V: 2,250 mm. Y: 1500 mm. Rotary table 2.500 x 2.500 mm Table load 25 Tons Spindle speeds: 4000 rpm. Spindle pow ...

Horizontal boring machine STANKO 2A636F1 (Ø 125)


Specifications: Spindle Diameter of spindle mm Ø 125 Cone of spindle ?50 Main drive power kW 30 Rotational speed min-1 6,3 ... 1250 The greatest moment on the sliding spindle Nm 3500 The greatest moment on the milling spindle Nm 5200 (6000) *  ...

Jig Boring Machines DIXI 75 ON


Jig boring machine DIXI type 75 ON Travel X 780 mm Travel Y 680 mm Travel Z 430 mm Travel W Spindle exit: 750 mm Table Rotary table 870 x 700 mm Year of construction 1967 Scale HEIDENHAIN 4 axes Various Delivered with several tools Various Separa ...
Get the latest machine offers by email: order newsletter