We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
x-travel: 1800 mm y-travel: 1200 mm z-travel: 900 mm total power requirement: 50 kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm total power requirement: 1,5 kW weight of the machine ca.: 1800 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Table dimensions: 1200 x 700 mm With 6 grooves Travel distances: X: approx. 500 mm Y: approx. 500 mm Z: approx. 700 mm The machine is equipped with a three-axis digital readout from the manufacturer HEIDENHAIN Spindle speed: 45 - 2800 rpm Approx. Onsite Dimension. (l x w x h): 2,200 x 2,000 x 2,400 mm, weight approx.: 4,000 kg
used
Description: Machine number: 1860 Spindle speed: 710 - 2840 rpm Operating voltage: 380 V Frequency: 50 Hz Table dimensions: 1200 x 700 mm With 6 grooves Travel distances: X: approx. 900 mm Y: approx. 500 mm Z: approx. 700 mm The machine is equipped with a digital display from the manufacturer HEIDENHAIN Approx. Onsite Dimension. (l x w x h): 2,400 x 2,300 x 2,500 mm, weight approx.: 3,000 kg
used
Description: Table dimensions: 1200 x 700 mm With 6 grooves Spindle speed: 45 - 2800 rpm Travel distances: X: approx. 700 mm Y: approx. 500 mm Z: approx. 700 mm The machine is equipped with an ANILAM digital display Approx. Onsite Dimension. (l x w x h): 2,400 x 2,300 x 2,500 mm, weight approx.: 3,000 kg
used
X-travel: 1800mm, z-travel: 1200mm, milling spindle rotational speed: 35.5-1800/min, table rotary movement: 360°, length: 3500mm, width: 2700mm, height: 3050mm, weight: 11.5t, with documentation, the the digital display is defective.
used
Datenblatt ist bei den Fotos dabei, Maschine muss selber abgebaut werden, ein Gabelstapler kann nach Absprache und Kostenerstattung bei einer Nachbarfirma ausgeliehen werden. Ordner mit Unterlagen ist vorhanden.
used
moving point, moving center point, moving Morse taper, moving center point, moving lathe point, center point -Manufacturer: Boko, revolving center point -Type: 2005 -Recording: MK5 -Dimension: Ø 85 x 252 mm -Weight: 4 kg
used
Used milling machine on behalf of a customer Manufacturer: Bokö Bohner & Köhle Type WF 2 Hydro Mill At the moment, the machine can still be viewed under electricity. ATTENTION Location: Bielefeld Sale from foundation.! Dismantling must be carried out by the customer. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, ...
used
Description: Additional information: BOKÖ end driver HS, manufacturer: BOKÖ, type: HS2, in a wooden box with 6 sets of driver jaws, including 30 pieces of used / unused drivers 15S / 30S / 45S / 60S / 60LS / 75S / 75S, quantity 1 piece weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 310 x 230 x 160 mm
used
Description: Additional information: BOKÖ end driver HS, manufacturer: BOKÖ, type: HS2, in a wooden box with 6 sets of driver jaws, including 30 pieces of used / unused drivers 15S / 15LS / 30RS / 45S / 60S / 60LS / 75RS, quantity 1 piece weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 300 x 235 x 160 mm
used
x-travel: 1500 mm y-travel: 1000 mm z-travel: 700 mm table:: 1500 x 1000 mm control: FIDIA weight of the machine ca.: 11 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Brezel-Verlängerung, funktionstüchtig
used
It is a used Erka / Muchau + Köhler pretzel machine (BJ 2008) with feeder for sale. The Erka pretzel machine works in conjunction with a cone wrapping machine. After wrapping in the croissant winding machine, the piece of dough is rolled out completely into a ready-to-loop strand in the pretzel machine. Optionally with printing board for Swabian and Bavarian pretzels. Incl. pretzel wrapping table Dimensions: Length of pretzel table with rollers: 3.80m, width: 1.00m, height of wooden top: 93cm Price on request.
used
Fat baking device Esback Köhler 661 101 -Fat baking device with fermentation cabinet -with 1 tipping plank trolley and 10 tipping boards -optional with 2 tipping plank trolleys and 20 tipping boards -380 Volt 50Hz -Fat tubs inner mass: 72x63cm
used
Cake cutting table for plate cakes, Fabr. Coalfish
used
Work table, baker's table, mobile with beech wood - Drawer block on the left, open at the bottom Stainless steel Approx. dimensions: 2500 x 800 x 900 mm, WxDxH Occasion
used
Work table, baker's table, mobile with beech wood worktop with storage rack at the bottom Stainless steel Approx. dimensions: 2500 x 800 x 900 mm, WxDxH Occasion
used
Work table, baker's table, mobile with beech wood worktop right 3 stainless steel flour trolleys for 100kg of flour each Left Drawer Block Stainless steel Approx. dimensions: 2000 x 800 x 900 mm, WxDxH Occasion
used
Work table, baker's table, mobile with beech wood worktop Storage rack at the bottom Stainless steel Approx. dimensions: 4000 x 800 x 900 mm, WxDxH Occasion Many more work tables / baking tables in stock!
used
Baker's work table with 8 tubs Beech wood worktop Stainless steel frame with gallery at the back Approx. dimensions: 2000 x 800 x 850-900 mm, WxDxH Occasion
new
Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...
used
Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used
new
Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...
used
Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...