used BOBST Punches

recently refurbished by Bobst, more details on request

Format max: 92 x 130 cm Format min: 45 x 58 cm max. machine speed 7000 sheets/hour max. pressure 500 tons apporx. 60 cm raised - pull guide at the left side - setting frame - cutting plate - diverse pins and bars

CA 1962 Rotation slot - and die-cutting machine, strength of cardboard: 0,5-4 mm, thickness of the corrugated board: 3-7 mm, capacity (speed): until 3600 single cuts per hour, slots and booklet edge at side performed in a single pass, soil or cover can in one Operation individually, and with Zentralo cut twice, produced, additional delivery one cutting and creasing device can corrugated cardboard in a single punched, slotted, and grooved in one direction and cropped, automatic Waste ejection device, line 5301, Max: 1300x1200mm, min: 250 mm, 3600/hours

on request

Manufacturer: Bobst Model: IRT.II. It is a rebuilt 2-color letterpress printing machine that uses flexographic clichés "I'm not going to be Year: 1966 Serial no. 5305 Automatic feeder Cliché execution: - Thickness: 4.75 mm, details without the thickness / thickness of the cliché adhesive tape - default: 2% Solid board and corrugated board Cardboard thickness maximum: 65 mm Minimum sheet format: 100 x 300 mm Sheet format maximum: 1,050 x 1,600 mm Working speed maximum 3,200 sheets / hour Manuals (English) available Hints: Colors: We haven't bought any more colors in a while. Inks for letterpress printing are not allowed dry oxidatively. (This should use inks from offset printing, in which the dry matter is omitted, so work, such as B. the low-migration MGA inks.) The machine still works, but prints with a large offset of approx. 1 cm in all directions. So it can o ...

Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

Bobst SP 142 ER Year 1981 Max.Size: 1420x1020mm Min.Size: 700*500mm Max Speed: 6000sh/h Max. cutting force: 600T center line Without blanking – only separating possible.

Format range: 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue HHS, 4 channels with 2 application heads, disc gluing unit on the left, Bobst CUBE control, vibrator, pre-crusher right and left, Kicker, counters, digital position indicators, additional means transport up / down in the folding station, folding floor module, pneumatic, clocked press belt. Overhaul 2021: cleaned, tested, painted, new feeder and transport belts.

Convertible stock EXPERTCUT 1.6 | 1.6 PR Corrugated board 0.75 - 9 mm .03 - .35 in Corrugated flute types A, B, C, D, E, F, G, N, O, AB, AC, BC, EB, EF, Triple wall Batch height Feeder, min. 20 mm 0.78 in Feeder, max. depending on board quality and weight Delivery, max. 300 mm 7.87 in Capability Sheet size, max. 1,600 x 1,100 mm 62.99 x 43.30 in Sheet size, min. 600 x 520 mm 23.62 x 20.47 in Sheet size, min. (with Accuracy Pack) 730 x 520 mm 27.56 x 20.47 in Production speed, up to 6,000 s/h 6,000 s/h Die-cutting With gripper margin, max. 1,600 x 1,075 mm 62.99 x 42.32 in Gripper margin (adjustable) 15 mm (+3/-4 mm) 0.59 in (+0.11/-0.15 in) Height of cutting rules 23.8 mm .93 in

2 Side Rotary creasing and slotting Machine, series 69175/60, Max: 1300mm, Min: 135x80mm, 100m./minute

(series 5310) 2 Side Rotary creasing and slotting Machine, Max: 1300mm, Min: 135x80mm, 100m./minute Year: ca. 1961

Metrics: Total length : 4600 mm Upper band length: 2800 mm Belt width: 900 mm Equipment: own drive, press pressure adjustment with pneumatic cylinder ( 3 pressure zones, separately adjustable) on heavy-duty rollers for lateral Displacement, cutting alignment with 2 driven belt stations, middle press belt with guide rollers

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.

Manufacturer Bobst Model Domino 110-M Year 1984 max paper lenght 110 cm Machine is in production

Bobst SP 1650 E Max.Size: 1150*1650mm Min.Size: 570*850mm Max Speed: 4500sh/h Year 1970 In good production condition.

Max. punching force: 400t, output: 6000 sheets/h, format: 600x520-1600x1100mm, including Feeder Easyloader, Panel Seperator Pallmac and documentation, without spare parts, the machine can only used outside the EU.

min./max. format: 700mm x 500mm/1420mm x 1020mm, throughput: 4500 sheets/h, max. punching force: 600t. Working materials: paper from 90 g/m2, cardboard up to 1.5mm thick, corrugated cardboard up to 4 mm thick. Dimensions X/Y/: 9900mm/2350mm, weight: 25500kg. Documentation available. On-site inspection is possible.

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, disc glue on the left, Vibrator & dental apprenticeship on the feeder, pre-crusher right and left, Kicker, counter, fully automatic format setting with Program memory, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped. Other: Machine can be visited by arrangement while running.

Format range: 1450 mm, min. 290 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 point bonding, electronic Upper glue unit HHS 16 channel with 2x 4 and 2x 2 application heads, High-pressure pump, vibrator & dental gauge on the feeder, Pre-crusher left, kicker, counter, 2x pneumatically ascendable Accessory holders, additional folding floor module with press, additional means transport in folding, pressing rollers after folding, fully automatic format adjustment, 2x alignment to the press belt, UV marking device, video surveillance on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transport belts. Other: Machine can be visited by arrangement while running.

Details Name Bost SP 142-ER ID PP-28816 Category Flatbed The Cutters Manufacturer Bobst Model SP 142-ER Year 1979 Speed 6000 sheets/h size 1420x1020 mm Min. Size 700x500 mm Condition Good Location Europe Availability Immediately Description • Double stripping • Cutting force 600 t • Working hours: 53000

Format range: 480 mm min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, electronic gluing unit HHS, 4 channel with 2 application heads, pane under-gluing unit left, Bobst CUBE control, vibrator, primary crusher right and left, Kicker, counter, minimal folding device, pneumatic, clocked Pressing tape. Overhaul 2023: cleaned, tested, new investor and Transport belts.

Format range: max. 1000 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-tend, 4 channel with 2 application heads, Disc gluing unit left, feeder with vibrator, folding floor module A2 Primary crusher right and left, kicker, counter, Bobst CUBE control, additional middle transport at the top/bottom in folding, cutting alignment on the press belt, pneumatic, intermittent press belt. Overhaul 2023: cleaned, tested, painted and fitted with new feeders and Transport belts, as well as equipped with new press belts. Other: The machine can be viewed while running by appointment.

Name Bobst Omega 1600 ID PP-31247 Category Folder Gluer Manufacturer Bobst Model Omega 1600 Year 1982 Size 1600 mm Min. Size 314 mm Condition Good Location Europe Availability April 2023 Description • Glue type HHS cold glue with 3 nozzles • Cardboard thicknesses: EB, BC, C, B, EE, E • Longitudinal seam • Types of boxes that can be made 4 corners, 6 corners, junction, self-supporting bottom, reinforced self-supporting bottom

Bobst SP 142 E year: 1978 Max speed: 6500 sh/h Max Size: 1020x1420mm Minimum Size: 500x700mm

Bobst SP 142 E,, Year 1978, Max.Size: 1420x1020 mm, Min.Size: 700 x 500 mm, Max.cutting force: 600 T, Feeder: Non-Stop, Centerline, Quicklocksystem, Location in Germany