used BERGER LAHR Motors

Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm -Weight: 2.5 kg/pc.

Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor -Type: VRDM 568/50 LWC -Gearbox: PL10 10: 1 -Shaft: Ø 10 x 25 mm -Quantity: 2 motors available -Price per piece -Dimensions: 210/60 / H91 mm -Weight: 1.9 kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Berger Lahr Servomotor IFS93/2DP0-DS/3DI-I54/O-001RPP41 4.5Nm 36VDC Imax 5A 14mm shaft. If desired, I can also pull the belt drive from the shaft.

Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar jib crane, indoor crane, workstation crane, chain hoist -Manufacturer: Weidner & Lahr, crane traverse for the transport of a wide variety of loads -Load capacity: 2000 kg -Hook spacing: min. 780 mm / max. 1800 mm -Steel rope: O 18 mm, length 1100 mm -Dimensions: 2025/120 / H780 mm -Own weight: 120 kg

Fine impactor, opening: approx. 1,000 x 700 mm, with inlet and outlet box, semimobile on steel skids, for soft and medium hard rock, construction year estimated

Manufacturer: BERGER Type: KL-29 Power supply: 230 V / 50 Hz Silvana 4 x 20 W = 80 W Electrical insect gear / insect killer BERGER type KL-29 (2 pieces) Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Bia�a USt-IdNr.: PL547-17-47-669 ABC.inter-wiba.com.pl Info@inter-WIBA.com.pl Tel. 0048 33 8125860

With Electrical motor

Functioning

Functioning

max. workpiece diameter: 200 mm min. workpiece diameter: 30 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cell Berger with grinding robot Kuka KR 180 (external grinding A1) Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 belt dimensions 3500 x 30 mm - contact disc diameter 200 mm - Motor power 4 kW 2 x polishing stations, - Polishing disc diameter 350 - 600 mm - Power 5.5 kW Gripper change cabinet Belt conveyorsInteroll Automation GmbH - Total length approx. 2000 mm - Bandwidth approx. 440 mm

Cell Berger with SChleif robot Kuka KR 180 (internal grinding I1) Grinding cell Berger 2012 (internal grinding I1) - Total weight approx. 6200 kg - Dimensions of the cell: approx. 4650 x 2400 x 2900 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) 2 x Polishing stations, Polishing disc diameter 350 - 600 mm Polishing disc width 100 mm - Power 5.5 kW

approx. 236 fields, frame height: 3m, shelves: 0,80m x 1m, – used - : Construction site price – primarily complete acceptance - : Price for complete acceptance: only 12.500.- € (net) = only 53.-€ / field, dismantled, packed and loaded! Price for partial quantities: Price per field ex location: only 75.- € (net), dismantled, packed and loaded! We reserve the right to take a minimum order! Manufacturer: unknown (probably Bito, Meta, Berger or similar) Type: unknown Year of construction: unknown Frame height: approx. 3m Shelves: 1m wide, 0.80m deep Payload per floor: unknown, but should be at least 150kg / floor 7 soils per field Available: from now on Condition: used (a bit dirty, see photos), not necessarily suitable for goods that are sensitive Location: Gau Bickelheim

ROLLER TABLE BLASTING SYSTEM MANUFACTURER: WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting machining of profiles and sheets Manufacturer: Wheelabrator Berger Type: CRC 400x300 Throughput width: 400mm Throughput height: 300mm Centrifugal wheel: 4 pieces x 4 kW frequency controlled Inlet roller conveyor: approx. 6,000mm Discharge roller coaster: approx. 6,000mm Incl. blow-off station, control cabinet, etc. TOP CONDITION ROLLER BLAST MACHINE BRAND : WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting processing of profiles and sheets. Brand: Wheelabrator Berger Type: CRC 400x300 Inlet Width: 400mm Inlet High: 300mm Wheels: 4 x 4,0kW with Drivers Inlet roll table: ca.6.000mm Outlet roll table: approx. 6.000mm Blowstation: YES Incld. Main Panel., Very good condition! Price: Loading on truck .-€ Price: Loading on Truck .-€ Warranty: 6 months f ...

approx. 560 pieces shelves for shelves / Berger, type Bert, 1m and 1,30m x 0,50m, 150kg, various - used - : Price per shelf: 9.-€ (net)! Minimum order: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 50cm Width: approx. 1.30m = 540 pieces Width 1m = approx. 20 pieces Height: approx. 4cm Payload: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: as of now Location. Frankenberg / Saxony

available Cracker Mill Rolls dia 600 x 800mm Description attached!

Manufacturer: Kottmann & Berger Type: BVA 3 Year of construction: 2001 Rated power: 5 kW Pressure: max. 6 bar Bending diameter (steel): 32 mm Bending radius: 1.5 x D – 2.5 x D Machine weight: 0,7 t

approx. 554 pieces of shelves for shelving / Berger, type Bert, 1m and 1.30m x 0.50m, 150kg, various - used - : Price per shelf: 9.-€ (net)! Minimum order: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 49cm = Field depth: 50cm Width: approx. 1.28m (bay width 1.30m) = 434 pieces Width 1m = approx. 120 pieces Height: approx. 4cm Load capacity: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: now Location. Frankenberg / Saxony

Key data: 600 mm, 1800 mm

Speed: Infinitely variable via new frequency converter Fixed roller: 1 - 14.9 rpm = 2 - 28 m/min Adjustment roller: 1 - 17.5 rpm = 2 - 33 m/min Gap adjustment with manual actuation via worm gear, conversion to electromotive gap adjustment can be offered

AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de

10 pieces of engine with gear without generator and starter construction year 1990 - in 1998 Nissan Primera, Almera, Sunny, Micra, Blubird parcel price