used BAXTER Pulse oximeters

North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.

GBS test pulse rev3 pulse generator for long-term insulation tests The test pulse structure is intended for long-term insulation tests on test specimens of up to 6 nF capacity. Inverter for high-voltage test transformer · Internal sine wave generator: 50-200Hz. · Pulse width modulation 16-24kHz of the sine over full bridge. · Inverter voltage 0-600V adjustable, Imax=2.6A, maximum power 1.3kW · Pulse current limit 110A (cut-off threshold) Pulse transformer – control · Control via full bridge · Full bridge power supply adjustable 0-1000V, 1.3A max. · Pulse current limit 100A (cut-off threshold). · Pulse width 20-120μs, nominal 94μs, adjustable · 2 selectable series inductors 150μH, 300μH to adjust the pulse width or rise times to load capacitance and voltage. · Pulse repetition rate 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable positive, negati ...

; ready for use

Manufacturer: Huettinger, Model: DC-DC Generator PFG 10000, for sputtering, metal coating Voltage: 3x400V, Power: 3x24A, Frequency: 50 / 60Hz Power: 10.000W, Stock: 5 pieces; ready for use

Sell a High Power Pulse Generator, the Cober brand. Model 606P The device is used and comes from a site shutdown, from the field of laboratory workshop. Device is unchecked as we have no knowledge of the operating system.

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 354 KW Plant No. 126.411 Connection voltage 3 x 400 Volt Setting range 25 – 350 amps Duty cycle 40 % ED at 350 amps 60% ED at 280 amps 100% ED at 250 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,000 x 400 x 1,000 mm Weight 65 kg Age 12 months Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of welder gloves with gausty 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 1 piece i ...

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 454 DW Series No. 109.129 Connection voltage 3 x 400 Volt Setting range 20 – 450 amps Duty cycle 50 % ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,100 x 490 x 1,200 mm Weight 140 kg Special accessories Rotary connection on the DV case, filter attachment Control panel in the DV box, wheels on the DV case, Control panel cover flap Age 5 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable ...

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 454 DW Series No. 109.129 Connection voltage 3 x 400 Volt Setting range 20 – 450 amps Duty cycle 50 % ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,100 x 490 x 1,200 mm Weight 140 kg Special accessories Rotary connection on the DV case, filter attachment Control panel in the DV box, wheels on the DV case, Control panel cover flap Age 5 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable ...

Transient Multifunktions-Test-Generator Modul CDM 3041-C Modul PQM 3403 Last calibration 7.7.2021 Dimensions 449 (17.7”) x 226 (8.9”; 5 HU) x 565 mm (22.2”) (W x H x D) Weight approx. 29 kg (64 lbs) Display Interface 7“ touch-screen USB Input Yes Price excl. VAT (#7660).

Machine type Pulse-Arc inverter welding system Brand EWM Type Phoenix 300 Expert Supply voltage 3 x 400 volts Adjustment range 5 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 220 amps 100% ED at 170 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 1,000 x 480 x 1,100 mm Weight 65 kg Age approx. 10 years Condition workshop-tested very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of welding gloves with cuff 1 piece spare parts box kpl. Equipped 1 can non-stick spray ME 4000 1 piece instruction manual Warranty 6 mont ...

Magnetizing device Magnet physics MF-RI8 Item condition: New without OVP The goods originate from a plant closure in the automotive industry and were temporarily stored in paternosters. Storage traces possible. R12B1_EK More products of this category can be found in our extensive EBAY assortment. More magnetizers - new and used - can be found in our shop! International shipping costs on request!

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Absolute encoder, incremental encoder with solid shaft -Type: DIDL-105z10-1SR1-100IMP -U: 10...24...30 VDC -Imax: 100 mA -Weight: 0.6 kg

Pulse Coder FANUC alpha A64 ( alphaA64 ) A860-0360-V501 Flange: Ø 83 mm New ! Dimensions: 90 x 90 x 45 mm

Pulse generator, synchronous motor actuated SCHLEICHER IPB1 8 s 42 V AC 50 Hz max. Breaking capacity: 6 A, 380 V AC, 0.5 kW Series voltage: 380 V AC used ! Dimensions: 70 x700 x 110 mm

Pulse Counter, Electromechanical Counter IVO F 504 ( F504 ) max. 10 pulses / sec 24 V AC unused ! Dimensions: 90 x 50 x 25 mm

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 26 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Pneumatic pulse valve, solenoid pulse valve, 3/2-way, directional control valve AIRTEC P 05 320 Nominal diameter: 6 mm Flow: 750 l/min Operating pressure: 0 - 10 bar Control pressure: 2 - 10 bar Connections: G 1/8 New ! Dimensions: 78 x 40 x 25 mm

Pulse wrench, pneumatic screwdriver ATLAS COPCO EP6PTX32 HR10-AT Ergo Pulse 8431 0375 22 Torque range: 16 - 32 Nm Operating pressure: 6.3 bar Tool holder: 3/8 New ! with operating instructions ! Dimensions (screwdriver only): 205 x 200 x 60 mm

Pulse wrench, pneumatic screwdriver ATLAS COPCO EP7PTX55 HR10-AT Ergo Pulse 8431 0375 32 torque range: 30 - 55 Nm Operating pressure: 6.3 bar Tool holder: 3/8 New ! with operating instructions ! Dimensions (screwdriver only): 200 x 180 x 55 mm

Rotary pulse encoder, rotary encoder with solid shaft -Manufacturer: Klaschka -Type: DIE/L-1.2-400 -Tension -Dimensions: 160/135/H90 mm -Weight: 0.8 kg