Category: 301 injection moulding machines / Plastic injection machines
Latest update: 30.05.2019 add to watchlist
item-No.: 23125827
New in: 1997

used

Seller: Tecplast e. K. Machinery
Location: Mülheim Land-de

add to watchlist

Battenfeld injection moulding machine Type: BA 6500 / 2800 HM control: Unilog 9000 C year of manufacture: 1997 Clamping unit Clamping force t: 650 gap mm: 800-1400 Holm dimension mm: 1000 x 1000 min/max height mm: 500 / 1100 Plate size: 1400 x 1550 injection unit Screw diameter mm: 85 injection weight gr: 1936 Injection volume cm 3: 2128 spray pressure bar: 1354 Dimensions and weights Dimensions Lxwxh m: 9.7 x 2.4 x 2.4 machine weight kg: 30,000/8000

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 27.09.2023 add to watchlist
approved
dealer
item-No.: 134307290
New in: 1999

used

check Seller: PaGaPlast
Location: 95-006 Bukowiec Land-pl

add to watchlist

Key data: 2000 , 491 , 50

Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: Unilog 4000 B Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 560 mm x 560 mm Disk size/platen size: 800 mm x 800 mm WZ height/mould hight: 200 mm max 520 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 970 mm Auger/screw size: 50 mm Stroke volume/shot volume: 540 CC / 491 gram PS spec. Spritzdr / injection pressure: 1822 bar General / General engine power: 30 kW Heating/heating power: 15.6 kW Dimensions/dimensions: 5.65 m x 1.45 m x 2.10 m Weight/weight: 10400 kg screen text/language: English additional equipment/additional equipment Core puller / core pulling: x 3 Lubrication lubrication / Central

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 27.09.2023 add to watchlist
approved
dealer
item-No.: 147243235
New in: 2000

used

check Seller: PaGaPlast
Location: 95-006 Bukowiec Land-pl

add to watchlist

Key data: 500 , 130 , 35

Manufacturer: Battenfeld Type: BA 500/210 TM Built: 2000 Control: Unilog B2 Closing force: 500 kN Closing type: Knee lever Tie bar distance: 320 mm x 320 mm Plate size: 490 mm x 490 mm Tool installation height: min 150 mm max 350 mm Opening distance: 250 mm Plate spacing max.: 600 mm Screw: 35 mm Lifting volume: 144 cc Spray weight PS: 130 gram PS Spray pressure: 1500 bar General Engine: 11 kW Heating: 10.4 kW Dimensions: 3.3 m x 1.1 m x 1.7 m Weight: 2500 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 27.09.2023 add to watchlist
approved
dealer
item-No.: 147243230
New in: 2004

used

check Seller: PaGaPlast
Location: 95-006 Bukowiec Land-pl

add to watchlist

Key data: 350 , 50 , 30

Manufacturer: Battenfeld Type: Plus 350/75 Built: 2004 Control: Unilog B2 Closing force: 350 kN Closing type: Hydraulic Tie bar ratio: 270 mm Plate size: 470 mm x 285 mm Tool installation height: min. 150 mm max 250 mm Opening distance: 200 mm Plate spacing max.: 450 mm Screw: 22 mm Lifting volume: 38 cc Spray weight PS: 34.5 gram HP Spray pressure: 1627 bar General Engine: 7.5 kW Heating: 2.7 kW Dimensions: 2.3 m x 0.9 m x 1.3 m Weight: 1100 kg Screen text: German / English Additional equipment Robot interface

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 27.09.2023 add to watchlist
approved
dealer
item-No.: 147243245
New in: 2000

used

check Seller: PaGaPlast
Location: 95-006 Bukowiec Land-pl

add to watchlist

Key data: 750 , 198 , 40

Manufacturer: Battenfeld Type: BA 750 - 350 TM Built: 2000 Control: Unilog B4 Closing force: 750 kN Closing type: Knee lever Tie bar distance: 370 mm x 370 mm Plate size: 590 mm x 590 mm Tool installation height: min 200 mm max 400 mm Opening distance: 330 mm Plate spacing max.: 730 mm Screw: 40 mm Lifting volume: 220 cc Spray weight PS: 198 gram PS Spray pressure: 1595 bar General Engine: 15 kW Heating: 12.1 kW Dimensions: 3.8 m x 1.3 m x 1.8 m Weight: 3300 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 27.09.2023 add to watchlist
approved
dealer
item-No.: 147243249
New in: 2002

used

check Seller: PaGaPlast
Location: 95-006 Bukowiec Land-pl

add to watchlist

Key data: 1000 , 291 , 45

Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 150098212
New in: 2002

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 5.600 € add to watchlist

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 27.09.2023 add to watchlist
approved
dealer
item-No.: 153801273
New in: 2005

used

check Seller: PaGaPlast
Location: 95-006 Bukowiec Land-pl

add to watchlist

Key data: 800 , 153 , 35

Manufacturer: Battenfeld Type: HM 80/350 S Year of construction: 2005 Control: Unilog B4 Closing force: 800 kN Closing type: Hydraulish Tie bar spacing: 370 mm x 420 mm Plate size: 544 mm x 544 mm Tool height: min 225 mm Opening distance: 475 mm Plate spacing max.: 700 mm Screw: 35 mm Lifting volume: 169 ccm Injection weight PS: 153.8 gram HP Injection pressure: 2083 bar general Engine: 15 kW Heating: 10,4 kW Dimensions: 3.7 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 06.02.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 162496995
New in: 2002

used

check Seller: Europnet IMM
Location: Land-de

add to watchlist

Clamping force: 10000 t Production year: 2002 Injection weight: 6175 g Injection unit: .../12000 Screw diameter: 120 mm Injection weight: 6175 g Tool closure system: 10000/... Clamping force: 10000 t Distance between columns: 1400 x 1200 mm Tool height: 550...1255 mm

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 22.02.2024 add to watchlist
approved
dealer
item-No.: 162525437

used

check Seller: TechModus LT
Location: 09133 Vilniaus Land-de

add to watchlist

Wittman-Battenfeld injection machines 2 units 110tons and one 180t -BTT110 - BT110 - BT180

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 11.01.2024 add to watchlist
item-No.: 163127098
New in: 1997

used

Seller: PIMM-used
Location: 52-40 Wroclaw Land-pl

add to watchlist

Battenfeld BA 2000 / 1000 BK injection moulding machine Year: 1997 Driver Version: Unilog 4000 B Technical Details : Clamping Unit: Clamping force: 2000 kN Mold plate size (h x v): 800mm x 800mm Distance between columns (h x v): 560 mm x 560 mm Mould opening stroke: 450mm Mould height min.: 220 mm Maximum mould height: 520 mm Max. daylight: 970 mm Hydraulic ejector - stroke: 160 mm Forward/reverse ejector force: 67 kN Injection Unit Screw diameter : 55 mm Ls/D Ratio: 20 Injection pressure: 1943 bar Injection volume: 522 ccm Injection weight, PS: 595 g Auger speed: 285 1/min Maximum plasticizing rate: 49 g/s Nozzle pressure: 131 kN Electrical & Hydraulic Equipment Nominal pump motor capacity: 30 kW Installed heating capacity: 22.6 kW Tank capacity: 560 ltr. Dimensions & Weight Machine dimensions: 5.65 m x 1.45 m x 2.10 m Total weight of the machine: 9800 kg

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 11.01.2024 add to watchlist
item-No.: 163127104
New in: 2004

used

Seller: PIMM-used
Location: 52-40 Wroclaw Land-pl

add to watchlist

Clamping unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1010 x 1010 Clearance between columns (hxv) [mm] 710 x 710 Min./ max. mould height [mm] 300-710 Maximum opening width [mm] 1380 Injection Unit Screw diameter [mm] 65 Injection volume [cm3] 1078 Injection weight [g] 981 Injection pressure [bar] 1777 Dimensions & Weight Net weight with control cabinet [t] 15.2 Dimensions (L x W x H) [m] 7,60 x 1,80 x 2,40

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 11.01.2024 add to watchlist
item-No.: 163127107
New in: 2005

used

Seller: PIMM-used
Location: 52-40 Wroc?aw Land-pl

add to watchlist

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 670 x 670 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] 225-500 Maximum opening width [mm] 930 Injection Unit Screw diameter [mm] 40 Injection volume [cm3] 251ccm Injection weight [g] 228 Injection pressure [bar] 2100 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Power of heaters [kW] 12.1 Dimensions & Weight Net weight with control cabinet [t]: 4.8t Dimensions (LxWxH) [m] 4.9x1.33x2

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 11.01.2024 add to watchlist
item-No.: 163127109
New in: 2002

used

Seller: PIMM-used
Location: 52-40 Wroc?aw Land-pl

add to watchlist

Clamping unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./ max. mould height [mm] 200 Maximum opening width [mm] 730 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g]: 95 Injection pressure [bar] 2042 Dimensions & Weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 24.03.2024 add to watchlist
approved
dealer
item-No.: 163157396
New in: 2005

used

check Seller: Maschinenhandel Kmet
Location: Land-de

add to watchlist

Key data: 10000 kN, 6974 g/PS, 120 mm

Year of construction 2005 Operating hours: 20,437 h Installation height 500 / 1050 mm Aperture travel 1300 mm Clamping dimensions 1350 / 1350 mm Tie bar spacing 1400 / 1120 mm Centering 250 / 250 mm Core Pull 2x Maximum clamping force 10000 KN Calculated dosing volume 7634 ccm Maximum shot weight polystyrene 6947 g Screw diameter 120 mm Water circuits DS 6 / AS 6 Equipped with Wittmann handling With conveyor belt

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 163510529
New in: 2002

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 2700 kN

Battenfeld TM 2700/1900 Year of construction: 2002 Injection unit: Screw diameter: 65 mm Spray weight: 981 g Spray pressure: 1777 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 270 t Tie bar spacing: 630x630 mm Size of clamping plates: 940x940 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Euromap Robot Interface Air valve x 2 Hydraulic core pull x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Central lubrication Automatic tool height adjustment Parallel Movements Metrics: Weight: 11800 kg Length/Width/Height: 7.08x1.70x2.20 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 163510531
New in: 2013

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 2000 kN

Wittmann Battenfeld VM 200/525H R1520 Servo Power / Hybrid machine with one turntable Year of construction: 2013 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 200 t Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 in automatic mode Air Valve x 4 Hydraulic Core Pull x 6 Control with hot runners Injection unit hardened - Bimetal Turntable diameter: 1520 mm Main motor of the machine - servo motor driven by inverter Horizontal injection unit with automatic injection height adjustment The machine can work with a second vertical injection unit Holder for automatic tool clamping Proportional valve on the injectio ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 163510532
New in: 1997

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 1300 kN

Battenfeld BA 1300V/315 V-R / Vertical injection moulding machine with rotary table Year of construction: 1997 Injection unit: Screw diameter: 40 mm Spray weight: 182.9 g Injection pressure: 1575 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 454x740 mm Size of clamping plates: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Turntable: 1250 mm The vertical injection unit - screw diameter fi 35 mm Metrics: Weight: 7500 kg Length/Width/Height: 3.83x2.33x4.16 m Drive: Pumps/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technica ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 163510535
New in: 2007

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 1000 kN

Battenfeld TM 100/525 Year of construction: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Metrics: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 163510537
New in: 2002

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 500 kN

Battenfeld TM 500/210 Year of construction: 2002 Injection unit: Screw diameter: 30 mm Spray weight: 96.5 g Injection pressure: 2042 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Central lubrication Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.51x1.18x1.63 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical test ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 163510539
New in: 2009

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 450 kN

Battenfeld HM 45/60S / Machine in very good technical condition Year of construction: 2009 Injection unit: Screw diameter: 18 mm Injection weight: 20.8 g Spray pressure: 2593 bar Dosing volume: 22.9 ccm Clamping unit: Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Operating hours: approx. 37,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x1.90 m Drive: Pumps/motor: 11 kW Heating capacity: 3.3 kW Total power: 14.3 kW All offered machines are started by our service tec ...

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 163510541
New in: 1996

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Battenfeld Plus 350/75 Year of construction: 1996 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit : Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: * Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Category: 301 injection moulding machines / Plastic injection machines
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 163510543
New in: 2012

used

check Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 50 kN

Wittmann Battenfeld MicroPower 5/7.5 / Electric Machine Year of construction: 2012 Injection unit: Screw diameter: 14 mm Injection weight: approx. 2.5 g Injection pressure: 2500 bar Dosing volume: 3 ccm Clamping unit: Clamping force: 5 t Size of clamping plates: 240x400 mm Ejector: electric Control: UNILOG B6 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Built-in vacuum pump from the Becker brand Automatic height adjustment of the injection unit Metrics: Weight: 1370 kg Length/Width/Height: 2.09x0.97x2.50 m Drive: Heating capacity: 2.45 kW All offered machines are started by our service te ...

Category: 308 other machines for plastic
Latest update: 29.03.2024 add to watchlist
item-No.: 163469705

used

Seller: Exapro
Location: Land-pl
Price: 295.000 € add to watchlist

Calander - calender capacity 1t per hour - extruder capacity 2t per hour - two-stage cascade extruder (upper: planetary extruder; lower: single screw extruder) - three rollers - rollers drive - AC motors powered by inverters. - max width 1400 mm (in a thickness range of 100-500 myx) - max width 1000 mm (in a thickness range of 510-1000 myx) - max temperature 230C - oil / electric shaft heating - 3 winders - expansion shafts 152 and 76 mm - possibility of producing laminates by thermo-lamination

Category: 301 injection moulding machines / Injection molding machines
Latest update: 29.11.2023 add to watchlist
approved
dealer
item-No.: 157615845
New in: 2011

used

check Seller: Lovric Maschinenhandel e.U.
Location: 2512 Tribuswinkel Land-at

add to watchlist

Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
BATTENFELD 3rd category level
 
RESALE used machinery 25 years online