used BATTENFELD ESDE GRAEWE Extruding lines for pipes

Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40

Qty. 1 Second-hand bifilar pipe winding line Mfc.: GRAEWE GmbH Type: AEW 1000 Built: 1998 Tube dia.: 10, 12, 14 & 16 mm Coil core ID: 940 mm OD: 1250 mm Bifilar coiler Type: EW 1000 PLC Simatic S5 Consist of: De-coiler Coiler Ring coiler Bending unit Support table Cutting shear Binding device Electrical Control

For sale Extruder Cincinnati CMT45L - used in very good condition. It is possible to perform a complete overhaul of the extruder. Extruder Cincinnati CMT 45L, used from 1995 Screw diameter: 45/96,9 Screw length: 1025 mm Main motor power: 16 kW DC cylinder heating power: 9,75 KW Cylinder cooling: oil capacity 60 – 100 kg/h More information on request.

Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr

See PDF attached

A used extrusion line for the production of rigid PVC profiles, Output approx. 300 - 350 kg/h, consisting of: 1 x twin screw extruder Manufacturer: Battenfeld-Cincinnati Type: ARGOS 93P-28D Year of construction: 2007 Screw diameter: 2 x 93 mm (parallel) Screw length: 28 x D Screw speed: max. 26.0 1/min. Drive power: 50 kW (GS motor) Power: approx. 150 kVA Operation: EXcPRO-XP with 10.4' TFT colour display Accessories: horizontal screw dosing, material hopper Degassing unit with vacuum pump Output: max. 300 - 350 kg/h for rigid PVC, depending on the material and product Note: new gearbox installed in 2014. 1 x Vacuum calibration unit Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Length: 6000 mm Vacuum pumps:3 x BluVac pumps from Speck, Energy-saving vacuum generation through patented speed control Pump power: 3 x 4.3 kW Longitudinal adju ...

Haul-off, used and refurbished Manufacturer: Battenfeld Type: P-250-SX-2000 Year of construction: 1988 Haul-off force: 30,000 N Pad width: 250 mm Effective contact length: 2000 mm Number of rubber pads: 200 pieces Haul-off speed: 0.16 - 4.0 m/min. Drive motor: 4.2 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic Profile cross-section: max. approx. 300 x 100 mm Power: 10 kW Dimensions: 3400 x 1300 x 2300 mm (LxWxH) Weight: approx. 2300 kg Condition: The haul-off has recently been completely overhauled.

1 x Vacuum calibration unit for profiles Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Total length: 6700 mm Vacuum connections: 4 x 8 pieces Water connections: 26 pieces Vacuum pumps No.1-3: 3 pieces of BluVac pumps from Speck, Energy-saving vacuum generation thanks to patented speed control Pump power: 3 x 4.3 kW Vacuum pump No. 4: Speck (5.5 kW) Longitudinal adjustment: electromotive Connected load: approx. 26 kW Accessories: 1 x water pump (1.5 kW) for the water circuit, 1 x blower (0.95 kW) for drying the profile,

Haul-off and saw combination, consisting of: 1 x Caterpillar haul-off Manufacturer: Battenfeld Type: P250-SX-2400 Year of construction: 1992 Contact length, effective: 2200 mm Pad width: 250 mm Haul-off force, max.: approx. 30,000 N Speed: max. 8.0 m/min. Connected load: approx. 6.0 kW 1 x Saw Manufacturer: Battenfeld Type: SPR-125 Year of construction: 1992 Profile cross-section, max.:230 x 90 mm or 160 x 110 mm Pipe diameter: max. 125 mm Saw blade diameter: 420 mm Travel distance:1000 mm Working speed: max. 20 m/min. Cutting capacity: 15 cuts/min. Saw motor: approx. 1.5 kW

Materials: PP, PS // Film Width (Max): 850 mm

Battenfeld Fischer Type: BFB 1-6 D, 1000 h runhour!!! Control: - Built: 1996 Other 2 litres, double head double station

Battenfeld injection moulding machine Type: BA 13000 / 7700 HM control: Unilog 9000 year: 1996 Clamping unit Clamping force t 1300 Opening stroke mm: 1650 Holm dimension mm: 1600 X 1250 min/max height mm: 800 / 1400 Plate size: 2220 X 1880 Injection unit Screw diameter mm: 120 Injection weight gr: 5146 Injection volume cm m³: 5655 Spray pressure bar: 1361 Dimensions and weights Dimensions Lxwxh m: 14 X 3.2 X 2.54 machine weight kg: 82,500/14500 Miscellaneous 2 + 2 core pull EUROMAP 12 INTERFACE

Battenfeld injection moulding machine Type: TM 1600 / 750 control: B4 year: 2001 Clamping unit Clamping force t 160 Gap mm: 480 Holm dimension mm: 520 x 520 min/max height mm: 225...-550 Plate size: 750 x 815 injection unit Screw diameter mm: Gr 40 injection weight: 258 Injection volume cm m³: 283 Spray pressure bar: 2678 Dimensions and weights Dimensions Lxwxh m: 5.1 x 1.5 x 2.1 machine weight kg: 6000 Miscellaneous B-4 control system interface

Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12146 h Runhour! Control: Unilog 9000 C year of manufacture: 1997 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot

Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12757 h Runhour! Control: Unilog 9000 C year of manufacture: 1996 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot

Battenfeld injection moulding machine Type: BA 6500 / 2800 HM control: Unilog 9000 C year of manufacture: 1997 Clamping unit Clamping force t: 650 gap mm: 800-1400 Holm dimension mm: 1000 x 1000 min/max height mm: 500 / 1100 Plate size: 1400 x 1550 injection unit Screw diameter mm: 85 injection weight gr: 1936 Injection volume cm 3: 2128 spray pressure bar: 1354 Dimensions and weights Dimensions Lxwxh m: 9.7 x 2.4 x 2.4 machine weight kg: 30,000/8000

Battenfeld UTR 300 heating controller for control of Unilog 4000 B

warehouse no.: 501525 manufacturer: BATTENFELD Typ: Druckplatte 4505715 year of construction: 2012 We offer a mould plate / pressure plate for injection moulding machine from BATTENFELD for model HM II 4500, number 4505715. Pressure plate for injection molding machine Battenfeld HM series II 4500, Art. Nr.: 4505715th printing plates include injection molding machines to the highly stressed machine parts. The pressure plate is offered immediately from stock in Langenfeld (Rheinland), available

Complete injection unit with 40 mm screw Repair required

with spare screw, high-pressure hose and various spare parts - see pictures

various spare parts incl.

Key data: 2000 , 491 , 50

Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: Unilog 4000 B Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 560 mm x 560 mm Disk size/platen size: 800 mm x 800 mm WZ height/mould hight: 200 mm max 520 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 970 mm Auger/screw size: 50 mm Stroke volume/shot volume: 540 CC / 491 gram PS spec. Spritzdr / injection pressure: 1822 bar General / General engine power: 30 kW Heating/heating power: 15.6 kW Dimensions/dimensions: 5.65 m x 1.45 m x 2.10 m Weight/weight: 10400 kg screen text/language: English additional equipment/additional equipment Core puller / core pulling: x 3 Lubrication lubrication / Central

- Battenfeld Unilog 4000 display - Battenfeld Unilog 4000 claviatura - Battenfeld Unilog 4000 TFU 400 card - Battenfeld Unilog 4000 rack - Battenfeld Unilog 4000 CPST 203 card - Battenfeld Unilog 4000 CPEA 200 card - Battenfeld Unilog 4000 ELIF 400 card - Battenfeld Unilog 4000 CC10 card - Battenfeld Unilog 4000 SNT 411 power supply - Battenfeld Unilog 4000 UTR 300 card

Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.