used BAHMÜLLER Collet chuck suspensions

Collet holder, tool holder, tool holder, milling holder, milling tool -Take: SK40 -Tension sleeves: 28 mm -Price: complete -Number: 10x available -Weight: 15 kg

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 5 mm Max. internal grinding diameter: 250 mm Grinding depth: 200 mm Workpiece spindle speeds: stepless from: 15 rpm up to: 1500 rpm Max. angle: +/-15 ° Spindle hole: 50 mm Max. distance from workpiece spindle to grinding spindle holder: 770 mm Table speeds: stepless from: 0 m/min up to: 10 m/min Workpiece spindle motor: 0.5 kW Drive for internal grinding spindle: 3 kW Machine´s weight about: 2250 kg Various accessories: Wheel trueing attachment 3-jaw chuck diameter: 200 mm 3-jaw chuck diameter: 250 mm 4-jaw chuck diameter: 250 mm Set of jaws hard Set of jaws Macnetic chuck diameter: 200 mm Steady Set of collets Set of grinding arbors

thread dia.: 254 mm grinding length: 350 mm thread pitch: 51 mm Control: SIEMENS S 8 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _______________________________________________________ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg  ...

Reference ID PP-38306 Category Stitcher Manufacturer Bahmüller Model BCL 21/36 Year Built 2003 Max. Size 3600 mm Min. Size 800 mm Condition Good Location Europe Availability Immediately Machine Description Cutting width: max. 3600 mm, min. 800 mm Sheet depth: WM max. 2100 mm, WM min.: 350 mm Flap dimensions: L min: /gluing: 150 mm, L min: / inside stitching: 150 mm, L min: / outside stitching: 300 mm, L min: / taping: 150 mm, W min: /gluing: 250 mm, W min: / stitching: 350 mm, W min: / taping: 250 mm, W max: (right side only) 1450 mm, L=W min: (square): 500 mm Production speed: Stapling: 1250 KI/min., Gluing: 3500 B/h, Taping: 42 m/min. Material thickness: max.: 8 mm, min.: 2 mm

Various guide rifles

Drive unit with pressure collet chuck RED BERG 940 400 22 315 / 630 rpm Collet chuck: 163E DIN 6343 Motor: KEB ZG0 KPR 71 G 4-2 ( ZG0KPR71G4-2 ) 0,55 / 0.7 kW 315 / 630 rpm 400 V 3AC Base plate: 300 x 240 x 18.5 mm hole spacing: 260 / 200 mm, hole diameter: 4xØ 13 mm / 1x Ø 18 mm groove: width: 18mm, depth: 7 mm used, tested ! Dimensions: 580 x 300 x 350 mm

ER collet chuck, collet chuck SANDVIK COROMANT 392.41014-100 32 100A collet: ER32 Working length: 87 mm mount: HSK - A100 New ! Dimensions ( collet chuck ): 145 x Ø 100 mm Dimensions ( packaging ): 130 x 105 x 150 mm

ER collet chuck, collet chuck, with collet set REGO-FIX SK 50 ER11 MS with 20 collets in plastic case used, tested ! Dimensions ( collet chuck ): 275 x 97 x 97 mm Dimensions ( case ): 410 x 320 x 150 mm

Collet chuck with collet set GEWEFA SK 50-24 ( SK50-24 ) with collets: 12 / 14 / 16 / 20 mm in wooden box Dimensions ( collets ): 64 x 64 x 80 mm Dimensions ( collet chuck ): 215 x 100 x 100 mm Collet chuck is New !! used, checked ! Dimensions ( packaging ): 320 x 240 x 120 mm

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change adapter, collet chuck, reducing sleeves, clip-on holder -Quick change chuck: taper: MK4 / 32 mm -Measurements: see photos -Dimensions: Ø 72 x 210 mm -Weight: 2.1 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Collet holder: SK50 -Type: SK50 D32 A71 CNB-01 -Tensioning sleeve: Ø 25 mm -Dimensions: Ø 98 x 200 mm -Weight: 3.5 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Recording: MK6 -Tensioning sleeve: Ø 31 mm -Dimension: Ø 76 x 290 mm -Weight: 5.7 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Recording: MK6 -1x clamping sleeve: Ø 25 mm -Weight: 7.5 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: WMW -Type: size 25 -Weight: 3 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: Gewefa -Type: 05.006.003/3-32Ø -Weight: 3.4 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-3/32-73 -Hoffmann Group No.: 302 460 50 -Weight: 3.4 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-2/20-63 -DIN: 2080 -No.: 0108016995 -Weight: 2.9 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Adjustment: SK50 -1x clamping sleeve: Ø 16 mm -Weight: 4.5 kg

Description: includes 8 pieces of ER32 collets 2-16 mm wrench Approx. Onsite Dimension. (l x w x h): 270 x 200 x 70 mm, weight approx.: 4 kg

Description: includes 5 collets 8-10-12-14-16 mm Approx. Onsite Dimension. (l x w x h): 260 x 160 x 60 mm, weight approx.: 4 kg

Description: Collet Chuck Tool holder SK40-ER16-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 12 kg

Description: Collet Chuck Tool holder SK40-ER20-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 7 kg

Description: Collet Chuck Tool holder SK40-ER25-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 14 kg

Description: Collet Chuck Tool holder SK40-ER32-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 210 x 100 mm, weight approx.: 9 kg

Description: Collet Chuck Tool holder SK40-ER32-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 210 x 100 mm, weight approx.: 9 kg