Category: 703 meat and fish processing machines / Meat mincers
Latest update: 13.03.2024 add to watchlist
approved
dealer
item-No.: 160135905

used

Location: Land-no

add to watchlist

Baader 601 Bone separator Condition: Good, working Baader 601 separates raw meat material from waste components - cartilages, veins, skin and bones. A flexible squeezing belt transports a product to a rotating perforated drum. There the raw material is go through a brief pressing operation. The hard particles such as bone and skin stay outside, soft parts are pushed inside the drum through the holes. Such model of separator differs by improved construction of loading and reliability. It is able to process coarse raw material such as shoulder bones. Capacity: up to 700 kg per hour Drum: 1, 3, 8 mm Electricity: 400 V - 3 - 50 Hz, 14 A Power consumption: 4 kW Dimensions (LxWxH): 1800 x 1080 x 1170 mm

Category: 703 meat and fish processing machines
Latest update: 28.03.2024 add to watchlist
item-No.: 161341829
New in: 1989

used

Seller: Mecalsa
Location: 15960, Ribeira Land-es

add to watchlist

SEPARATOR BAADER, TYPE: 699 WITH FEED ELEVTOR AND OUTLET CONVEYOR Technical description: - Separator hopper with breaker and helicoid Dimensions: 2100 x 1050 x 1400 mm - Elevator for bins up to 200 liters Lift height: 2500 mm Dimensions: 900 x 750 x 3500 mm - Separator Baader, type: 699 Serial number: 12-7157-699 Year: 1989 Power supply: 380 V, 50 Hz, 15.0 A, 8.0 kW Drum holes: ? 2 mm Dimensions: 1500 x 1450 x 1550 mm - Outlet conveyor with plastic band Bandwidth: 200 mm Lift height: 900 mm Dimensions: 1500 x 400 x 950 mm This machine uses the same principle as the BAADER 694 and 697 but with much higher throughput. It is a further development of the BAADER 695. The speed is infinitely variable up to twice the normal speed. The belt pressure is controlled by a hydraulic system. Pressure and speed indicators allow correct adjustment of the machine to different raw material. T ...

Category: 703 meat and fish processing machines
Latest update: 28.03.2024 add to watchlist
item-No.: 161341850
New in: 1985

used

Seller: Mecalsa
Location: 15960, Ribeira Land-es

add to watchlist

SEPARATOR BAADER, TYPE: 696 Technical description: Machine number: 12 6533 0696 Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Power supply: 380 V, 3 Ph, 50 Hz, 3.7 A, 1.5 kW Dimensions: 1050 x 1000 x 1340 mm

Category: 703 meat and fish processing machines
Latest update: 28.03.2024 add to watchlist
item-No.: 161341861

used

Seller: Mecalsa
Location: 15960, Ribeira Land-es

add to watchlist

SEPARATOR BAADER, TYPE 694 Technical description: Power supply: 380-440 V/50-60 Hz Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Dimensions: 1100 x 1000 x 1300 mm This machine produces bone-free fish meat from pinbone cuttings but also from other fish cuttings with bones and skin which are yielded in fish processing. The material is submitted to a brief pressing operation between an elastic belt and a perforated drum, so that the fibre structure of the fish meat is maintained. This material may be processed into high-grade products.

Category: 703 meat and fish processing machines
Latest update: 28.03.2024 add to watchlist
item-No.: 161341862

used

Seller: Mecalsa
Location: 15960, Ribeira Land-es

add to watchlist

SEPARATOR BAADER, TYPE: 694 Technical description: Power supply: 230-400V /50Hz / 1,5Kw Bandwidth: 200 mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Dimensions: 1140 x 950 x 1300 mm This machine produces bone-free fish meat from pinbone cuttings but also from other fish cuttings with bones and skin which are yielded in fish processing. The material is submitted to a brief pressing operation between an elastic belt and a perforated drum, so that the fibre structure of the fish meat is maintained. This material may be processed into high-grade products.

Category: 703 meat and fish processing machines
Latest update: 28.03.2024 add to watchlist
item-No.: 161341891

used

Seller: Mecalsa
Location: 15960, Ribeira Land-es

add to watchlist

SEPARATOR BAADER 696 Technical description: Drum diameter 200mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm).

Category: 703 meat and fish processing machines
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 142938472

used

Location: Land-no

add to watchlist

Baader 201 Violet Machine Violet machine for large cod and red fish Released: 1997-1998 Condition: excellent The machine is designed to produce standard fillets from gutted and decapitated large fish without shoulder bones. Processed cod, salmon, tuna. Equipped with a functional device for laying fish, large knives scraping rib bones, as well as guides, providing a high output of evenly cut fillets. Due to its compactness, the Baader 201 can be mounted on ships. It is possible to connect the skin-removal machine. Performance: 10, 18 or 20 fish/min clocked Working range: Atlantic cod - 50-120 cm (max. 13 kg); Cod Pacific - 54-108 cm (max. 13 kg); side - 60-120 cm (max. 12 kg), salmon - max. 9 kg, tuna - 4.5 - 9 kg. Power consumption: 4.5 kW Water consumption: 16 litres/min Dimensions: 4.70 x 1.67 x 1.45 m Mass (net/gross): 1800/2230 kg

Category: 703 meat and fish processing machines
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 142938498

used

Location: Land-no

add to watchlist

Baader 142 - The Ripper Machine for vacuum evisceration of salmon, trout Released: 1998, 1999 Condition: excellent This Baader 142 machine is designed to eviscerating salmon, trout weighing from 1.3 kg to 11 kg (head or without). The fish being processed is loaded into the machine by hand. A strong clip captures the carcass from the tail for further transportation. The fish is then measured using electronic sensors to help determine the location of the cut. The cutting mechanism is controlled by sensors and the computer, it produces a careful, symmetrical cut, which does not affect the insides. The insides are removed by means of a vacuum device. Processed fish weighing from 1.3 to 11 kg Performance: 16 fish/min Vacuum pumps and waste tanks included

Category: 703 meat and fish processing machines / Fish processing machines
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 34951474

used

Location: Land-no

add to watchlist

Baader 200 Filleting machine for salmon species Machine for producing fillet of salmon, trout and the same fish species. It processes gutted and headed fish with or without collar bone. The fish is feed through the tools in such manner that the fillets does not get any stress - it is a prerequisite for a smooth surface of the cut. The salmon version produces both fillets with and without collar bone, and after adaptation, salmon sides on which the rib bones are retained. Capacity: 15-35 fish/min Working range: from 1,5 to 5,5 kg (gutted and headed fish) Power consumption: 5 kW Water consumption: 9 l/min Dimensions: 4,30 x 1,75 x 1,50 m Weight (net/gross): 1800/2230 kg

Category: 703 meat and fish processing machines / Fish processing machines
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 109245047

used

Location: Land-no

add to watchlist

Filleting machine for small whitefish Condition: good Working range: small witefish from 30 to 55 cm Capacity: 25-40 fish/min Power consumption: 1,5 kW Water consumption: 15 l/min Dimensions: 3,25 x 1,20 x 1,70 m Weight (net): 810 kg

Category: 703 meat and fish processing machines / Fish processing machines
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 110785810

used

Location: Land-no

add to watchlist

Man. year: 1990 Condition: overhauled The Baader 51 is a skinning machine for fillets cut from white fish, blue whiting, halibut and red fish. This machine seizes the skin without initial cut from the tail end, right where the skin begins. This results in a higher yield. Usable width of feed belt: 380 mm The fillets can be placed on the belt optionally side by side. Capacity: 50-160 fillet/min (depends on the fillet size and operator's skill) Power consumprion: 1,5 kW Water consumption: 15 L/min Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg

Category: 703 meat and fish processing machines / Fish processing machines
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 142670880

used

Location: Land-no

add to watchlist

Condition: Good, working The Baader 51 skin-removal machine is designed to remove skins from the fillets of cod fish, heke, paltsus and red fish. The machine captures the skin from the tip of the tail without any incision. This provides a higher output of finished products. The width of the pipeline: 380 mm. The fillets are placed on a conveyor belt next to each other. Performance: 50-160 fillets per minute (depending on fillet size and operator skills) Power consumption: 1.5 kW Water consumption: 15 litres per minute The width of the work pipeline: 380 mm Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg

Category: 703 meat and fish processing machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 142938474

used

Location: Land-no

add to watchlist

Condition: Excellent The machine is designed for decapitation in continuous mode of cod fish, and can also beused for beheading perch. Size range: fish with a total length of 30-70 cm Performance: Up to 40 fish per minute. Power consumption: 1.87 kW Water consumption: 5 litres per minute. Belt width: 150 mm Divider height: 80 mm Height: 1450 mm Dimensions (DxXV): approximately 2160 x 885 x 1860 mm

Category: 703 meat and fish processing machines
Latest update: 15.02.2024 add to watchlist
approved
dealer
item-No.: 163367340

used

check Seller: BmgTrade
Location: 22400 Zamo?? Land-pl

add to watchlist

Baader 603-510 is a soft separator equipped with a flexible squeezing belt that transports the product to a perforated drum. Within this drum, meat is gently squeezed through the perforations, allowing for the separation of softer components from harder particles like bones, cartilages, fins and skin, which remain outside the drum. It has the capacity to process up to 2200kg of raw material, catering to high-volume production needs. The machine is equipped with two drums (both 5mm hole diameter) and a loading device for 200l meat bins, enhancing its efficiency and suitability for separating soft and solid components. This makes it particularly effective for desinewing and extracting meat leftovers from red meat, poultry, and fish In set with trolley for tools. Power: 6.2kW Electric supply: 400V, 3Ph, 50Hz Weight with lift: around 980 kg

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163670086
New in: 1988

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Max. operating temperature: 200°C, usable space: 4.42m³, steam room volume: 5.6m³, volume flow: 9.87m³/min, heating output: 30kW, nominal output: 32.2kW.

Category: 703 meat and fish processing machines
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 148273970

used

check Seller: Gietech GmbH
Location: Land-de
VS

add to watchlist

Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.

Category: 703 meat and fish processing machines
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 148273987

used

check Seller: Gietech GmbH
Location: 28844 Weyhe Land-de

add to watchlist

Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.

Category: 703 meat and fish processing machines
Latest update: 19.09.2023 add to watchlist
approved
dealer
item-No.: 148273994

used

check Seller: Gietech GmbH
Location: Land-de

add to watchlist

Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.

Category: 703 meat and fish processing machines / Fish processing machines
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 148735908
New in: 2011

used

Location: Land-no

add to watchlist

Round-cut heading machine for whitefish Baader IS033 Processes: cod and other whitefish with throat cut Working range: 1-13 kg Throughput rate: up to 30 fish/min Operator: 1 person The fish is placed belly to operator head first into the machine. The fish head is held and the entire fish is transported to the knife section where a high-yield head cut is performed. The main body of the fish, with collarbone on, discharges to the front of the machine. The head is transported via a chute to the rear of the machine. Thanks to its construction, the operator has a clear view of the machine. Adjustments e.g. for adaptations or service operation are performed easily and operator-friendly as well as knife replacement. Technical Data: Water consumption: 10 l/min Power consumption: 2.2 kW Features Maximum yield Easy handling and clean up No size adjustment ne ...

Category: 703 meat and fish processing machines / Fish processing machines
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 151656280

used

Location: Land-no

add to watchlist

Baader 988 Trimming machine for salmon Condition: Good, working This is the high-speed trimming machine for salmon and trout. Make it possible to reduce manual work and increase quality and speed of cutting belly side, back side and surface of fillets. Due to advanced technology this unit calculates size and volume of every fish fillet before trimming. Average capacity: up to 50 fillets per minute. The optimal size of fish fillets for maximum product throughput and quality (LxW): up to 750 x 250 mm. Data of cutting stored in PC and parameters of trimming could be archived. Equipped with Baader 1517 Filet Transfer Unit.

Category: 703 meat and fish processing machines / Transport and Loading carts
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 151656285

used

Location: Land-no

add to watchlist

Baader 517 Filet Transfer Unit Condition: Good, working Designed for processing lines at fish factories (preferable to work with salmon and other salmon species) Working product range: 2-7 kg Capacity: up to 25 fish per minute

Category: 703 meat and fish processing machines / Fish processing machines
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 151875418

used

Location: Land-no

add to watchlist

Baader Filleting machine for whitefish Condition: overhauled Working range: whitefish from 35 to 70 см (=0,4-2,5 kg) Capacity: 27 fish/min Power consumption: 2,2 kW Water consumption: 20-25 l/min Dimensions: 3,80 x 0,95 x 1,60 m Weight (net/gross): 930/1564 kg

Category: 703 meat and fish processing machines
Latest update: 11.12.2023 add to watchlist
approved
dealer
item-No.: 153016704

used

check Seller: UFM
Location: DN10 Doncaster Land-uk

add to watchlist

Baader Strip cutter Model: 381 Serial: 99-177-000 Stainless frame, belt width 270mm, overall length 1500mm, currently set for 17mm strip cut but can add blades for thinner cut, mobile, 3Ph

Category: 703 meat and fish processing machines / Fish processing machines
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 153347656

used

Location: Land-no

add to watchlist

Baader 189 Filleting machine for cod and whitefish Condition: overhauled This machine processes cod, pollack, haddoch, hake employing well proved system with high fillet yield. Size range: fish from 40 to 85 cm (or 0,6 - 4,5 kg gutted fish with head) Capacity: 24-34 fish per minute Fish are loaded on to the machine after heading. The filleting tools adjust themselves to the different fish size within the operating range. For skinning the fillets have to be transferred manually to a skinning machine. Power consumption: 3 kW Water consumption: 15 liters per minute Dimensions (LxWxH): approx. 4000 x 1100 x 2400 mm Weight (net/gross): approx. 1060/1650 kg Can be combine with heading machine Baader 427 and skinning machine Bader 51 to compile a complete line.

Category: 703 meat and fish processing machines / Fish processing machines
Latest update: 03.01.2024 add to watchlist
approved
dealer
item-No.: 153347659

used

Location: Land-no

add to watchlist

Heading machine Baader 421 Condition: good Capacity: 28 fish per minute Water consumption: 12 l/min Staff: 1 person Dimensions (LxWxH): 1350x1000x1270 mm Weight: 660 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
BAADER 3rd category level
 
RESALE used machinery 25 years online