used BUDERUS Boilers for the foodindustry

Specifications Largest grindable bore: 100 mm Maximum grinding depth: 100 mm Largest workpiece diameter in chuck: 120 mm Diameter of the hollow spindle bore: 330 mm Workpiece spindle center above the floor: 1240 mm Diameter of the grinding spindle mounting blocks: 100 mm Diameter of the external and plane grinding spindle holders: 140 mm Maximum stroke of the two internal grinding machine tables Z-axes: 500 mm X-axes: 140 mm Table speed infinitely variable Z-axis: 0 - 15 m/min X-axis: 0 - 10 m/min Feed speed infinitely variable: 0.01 - 10 m/min Delivery depending on stroke: 0.0005 -0.10 mm Workpiece spindlespeeds, infinitely variable by digital drive, programmable by CNC control

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Starting speed infinitely adjustable: 0.01 - 10 mm/min Start depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg

Nominal power: 468.2kW, max. temperature: 100°C, capacity: 59l, length: 1870mm, width: 845mm, height: 1460mm, weight: 465kg, was maintained regularly.

workpiece length: 150 mm slide travel X-axis: 1060 mm z-travel: 280 mm swing diameter: 320 mm control: Siemens Sinumerik 840D rapid speed: 0 - 30 m/min work piece spindle speed: 0 - 6000 U/min flange:: workpiece spindle - bore: 45 mm diameter: 220 mm c-axis: zur Positionierung total power requirement: 65 kW weight of the machine ca.: 10 t dimensions of the machine ca.: - m The CNC 235 vertical hard machining center with vertical workpiece spindle allows the use as single-purpose machine for - Internal grinding - External grinding - Hard Turning Furthermore, these processes can be combined with each other and be supplemented by other technologies. equipped with: - CNC Control Siemens 840D - 2 Toolrevolver (li/re) Size 16 - 2 spindle units (X1, C1, Z1 / X2, C2, Z2) - Internal grinding spindle (45000 U/min) 18kW - Dressing Spindle Dr.Kaiser C72F - 1500-16000 U/min, 0,5kW - Marposs Workpiec ...

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Starting speed infinitely adjustable: 0.01 - 10 mm/min Start depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Feed speed infinitely adjustable: 0.01 - 10 mm/min Feed depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg

Technical data Largest sandable bore:100 mm Maximum grinding depth: 100 mm Largest workpiece diameter inchuck: 120 mm Bore diameter of the hollow spindle : 330 mm Workpiece spindle center above the ground: 1240 mm Mounting diameter of the inner grinding spindle trestle:100/120 mm Diameter of the outer grinding spindle: 140 mm Maximum stroke of the two internal grinding machine tables Z-axis: 500 mm X-axis: 140 mm Table speed infinitely variable: Z-axis: 0 - 15 m/min X-axis: 0 - 10 m/min Feed speed infinitely variable: 0.01 - 10 m/min Delivery depending on stroke: 0.0005 -0.10 mm Workpiece spindlespeeds, infinitely variable by digital drive, programmable by CNC control

Specifications Bore grinding range: 5-100 mm Maximum workpiece depth: 150 mm Largest outer diameterofthe working:200 mm Largest swivel diameter above the table: 310 mm Height of workpiece spindle above ground: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 rpm Table: Z-axis: 300 mm X-axis: 1050 mm Table speed infinitely adjustable: Z-axis: 0-30 m/min X-axis: 0-90 m/min Delivery speed infinitely variable: 0.01 - 10 mm/min Delivery depending on stroke: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Mounting hole of the workpiece spindle: ? 62 mm Workpiece spindle flange diameter: ? 220 mm Workpiece spindle positioning C-axis Diamond target roller: ? 310 mm Connected value of the machine: approx. 40 kW Machine weight : approx. 7000 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: 150 mm Max. workpiece diameter: 250 mm Largest workpiece length: 350 mm Largest swing diameter above the table: 310 mm Height of the workpiece spindle above the floor: 1150 mm Workpiece spindle speeds NC-programmable: 0 - 3000 U/min Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840D Weight: 7500 kg

Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC-programmable Table strokes: Z1 axis : 600 mm Z2 axis : 400 mm Z3 axis : 400 mm X1 axis : 280 mm X2 axis : 280 mm X3 axis : 280 mm Table speed infinitely adjustable: Z axes : 0 - 30 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 50 kW Control: Siemens SINUMERIK 840D Weight: 9000 kg

Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC-programmable Table strokes: Z1 axis : 600 mm Z2 axis : 400 mm Z3 axis : 400 mm X1 axis : 280 mm X2 axis : 280 mm X3 axis : 280 mm Table speed infinitely adjustable: Z axes : 0 - 30 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 50 kW Control: Siemens SINUMERIK 840D Weight: 9000 kg

Largest workpiece diameter: 150 mm Max. workpiece diameter: 250 mm Largest workpiece length: 350 mm Largest swing diameter above the table: 310 mm Height of the workpiece spindle above the floor: 1150 mm Workpiece spindle speeds NC-programmable: 0 - 3000 U/min Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840D Weight: 7500 kg

Specifications Bore grinding range: 5-100 mm Maximum workpiece depth: 150 mm Largest outer diameterofthe working:200 mm Largest swivel diameter above the table: 310 mm Height of workpiece spindle above ground: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 rpm Table: Z-axis: 300 mm X-axis: 1050 mm Table speed infinitely adjustable: Z-axis: 0-30 m/min X-axis: 0-90 m/min Delivery speed infinitely variable: 0.01 - 10 mm/min Delivery depending on stroke: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Mounting hole of the workpiece spindle: ? 62 mm Workpiece spindle flange diameter: ? 220 mm Workpiece spindle positioning C-axis Diamond target roller: ? 310 mm Connected value of the machine: approx. 40 kW Machine weight : approx. 7000 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

CNC Inene Grinding Machine with Automatic Loading Arm Year of construction : 2009 CNC 840 D Great Condition

Fan oven commercial oven -Version: electric, for commercial catering -Max. Temperature: 250 C -Heater power: 18 kW -Interior dimensions: W540 / L420 / H630 mm -Machine surface: made of stainless steel

Combined heat and power plant with generator El. Power: 40 KW Thermal power 72 KW Fuel: natural gas Mains connection 400 V 50 Hz 100 A Flow 90 C Return 70 C Pressure 16 bar Generator 60 KVA Length 2.40 m Width 1 m Height 1.60 m

total power requirement:45 kW weight of the machine ca.:7,5 t workpiece length - max.:150 mm max. workpiece diameter:150 mm max. swing diameter over bed:320 mm height of workpiece spindle over floor:1150 mm work piece spindle speed:0-6000 U/min 4 x identical machines available Hard turning/ grinding machine

The heating system includes: - Boiler Buderus Logano GE515- gas boiler 350-400 KW - Gas burner Weishaupot WG40N/1-A ZM-LN, probably built in 2010. - Diaphragm pressure expansion vessel 800 liters, manufacturer Reflex. - Storage water heater 390 litres, Buderus. - Complete control

Heuft boiler Type: KO 400 400kW completely overhauled For thermal oil furnaces and plants with switch box with separate control large white-head burner approx. 150x150cm and 230cm height

Daub Thermal Oil Boiler Type: KO 70 with gas burner Power max. 81 kW Year of construction 1989

Thermal Oil Boiler Daub BO 141S / HTT -Thermal oil boiler -Power max. 81 kW -without burner