Category: 107 sheet metal working / Hydraulic Shear
Latest update: 26.01.2024 add to watchlist
approved
dealer
item-No.: 160155727
New in: 1996

used

check Seller: Mieth Maschinenhandel
Location: 63322 Rödermark Land-de

add to watchlist

offer 22537 Specifications: - working width 4040 mm - cutting capacity St 40 6 mm - Cutting angle hydro.adjustable 0.5 - 3 ° - Cutting gap adjustment hydr. - Number of hydraulic hold-downs 22 pcs -Mot. – Backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 p/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - with: - E-foot switch - Cutting line lighting - Pneumatically supported sheet metal lifting

Category: 107 sheet metal working / Guillotine Shears
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162511036
New in: 1995

used

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Standort Land-de

add to watchlist

sheet width: 3000 mm plate thickness: 16 mm Motor Capacity: 30 kW machine weight ab.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163481064

used

check Seller: Plum & Partner Werkzeugmaschinen GmbH
Location: Bünde bei Bielefeld
Price: 1.350 € add to watchlist

sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163428994
New in: 1996

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 4.500 € add to watchlist

Guillotine shears, FASTI type 506-10-2,5 Masch. Nr. 96-506-018 Year of manufacture 1996 Cutting length 1030 mm Cutting thickness 2.5 mm Working height 850 mm Drive power 4 kW Mains connection 400 volts, 50 Hz. - mechanical sheet metal hold-down - electric foot switch - simple backgauge 550 mm with handwheel adjustment - 2 support arms 550 mm - angle stop right 750 mm - protective housing SICK behind the machine - control cabinet fixed to the machine space requirement L x W x H 2150 x 1650 x 1400 mm weight 650 kg good condition; used

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 161473503
New in: 1977

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 4.800 € add to watchlist

guillotine shears, sheet metal shears DIGEP type OL 3 Fabr. No. 1312 Year of construction 1977 Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mm Cutting thickness at 450 N/mm² 3 mm single backgauge 500 mm Column projection 200 mm Cutting angle 2 Stroke rate at full cutting length max. 50 strokes/min. Working height 860 mm Motor power 2.2 kW Mains connection 380 volts, 50 Hz - LED cutting area lighting - simple backgauge with manual adjustment - Mechanical foot switch - Front angle stop left - 1 piece front sheet metal supports 300 mm Space requirement L x W x H 1660 x 1350 x 1200 mm Weight 1600 kg good condition; used

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12778739
New in: 1981

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12778745
New in: 1966

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Working width: 5050 mm thickness: 10 mm power: 30 kW space: 2450 x 5600 x 2500 mm weight: 28000 kg

Category: 107 sheet metal working
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 123413743

used

check Seller: AUER
Location: A - Oberösterreich Land-at

add to watchlist

Working width: 5050 mm thickness: 10 mm power: 30 kW space: 2450 x 5600 x 2500 mm weight: 28000 kg

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12778814
New in: 1978

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Working width: 4100 mm sheet thickness: 6 mm radius: 100 mm rear gauge: 0-1000 mm power: 18.5 kW space: 4600 x 2200 x 1950 mm weight: 11000 kg

Category: 107 sheet metal working / CNC Hydraulic Plate Shear
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12778822
New in: 1987

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 158218394

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 10,00 mm Sheet width: 2000 mm Depth rear gauge: 0 mm Maximum sheet thickness:    10mm Max. cutting length:        2.000mm Strokes on full length:     100mm Strokes in short 1000 length:1000 Number of down holders:     11 Approach speed:             50mm/sec. Power:                      15kW Length:                     2.700 mm  Width:                      2.050 mm  Height:                     2.050 mm  Weight:                     5.900 kg 

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218413

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 25,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm Maximum sheet thickness:        25mm Max. cutting length:            3.070mm Strokes on full length:         7mm Strokes in short 1000 length:   12 Cutting angle:                  0,5 - 2,5 ° Length backgauge:               1.000mm Number of down holders:         15 Control:                        Siemens  Safety guides:                  Sick  Operated mechanical or hydraulic:hydraulic  Power:                          45kW Length:&nb ...

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 26.01.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 126219819
New in: 1991

used

check Seller: Mieth Maschinenhandel
Location: 63322 Rödermark Land-de

add to watchlist

Technical data: -maximum cutting width 3050 mm -maximum cutting capacity at 45 KP / mm² 4 mm -hydr... Cutting angle adjustment - number of holders of 18 PCs -Speed up to 24 / min -front angle stop 1100 mm -3 PCs front support arms 750 mm -mot. Backgauge positioning control 5-1000 mm - sheet reversible - cutting line illumination -E - foot switch -Rear area protection with light barrier -Drive 400 V / 9.5 kW -Space requirement approx. B 3900 x H 1850 X 2100 mm -Weight approx. 5.7 t

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 14.02.2024 add to watchlist
approved
dealer
item-No.: 128246240
New in: 1993

used

check Seller: Venker Werkzeugmaschinen GmbH
Location: 33335 Gütersloh, Anemonenweg 8 Land-de
Price: 21.200 € add to watchlist

Maximum cutting length: 4000 mm Maximum sheet thickness: 4 mm steel Driven back gauge to 1000 mm Page fence and table extensions Cutting length limit Cutting edge lighting Protection fence, roll with safety switches Weight: 8500 kg

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 11.03.2022 add to watchlist
approved
dealer
item-No.: 132965074
New in: 2015

used

check Seller: MAFdirekt Maschinen- & Anlagenfachhandel Marcus Epple
Location: Baden-Württemberg Land-de

add to watchlist

Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration  ...

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 143841503
New in: 2010

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Maximum cutting length: 3080 mm Maximum sheet thickness during cutting: 6 mm Maximum cutting angle: 2 st Total power requirement: 11 kW Rear stop: 1000 mm Machine height: 1950 mm Machine length: 4100 mm Machine width: 2050/3650 mm Machine weight: 7980 t

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 25.12.2023 add to watchlist
item-No.: 147017142

used

Seller: NORDPRÄZISION Werkzeugfabrik GmbH
Location: 22869 Schenefeld Land-de

add to watchlist

Scissor knife for table scissors . Shear knife. Knives.

Category: 107 sheet metal working / Sheet Metal Shears
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794744

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Hydr. Sheet Metal Shear Make MENGELE Type S 4 - 5000/3Machine -No: S 2237 5000/3 Year 1976Cutting length: 5050 mmMax. Sheet thickness: 3.0 mmlateral. Discharge: 300 mmCutting angle: 0.6 °Strokes per minute: 34Number of hold-downs: 22mot. backgauge: 0 - 1000 mmlateral. Angle stop: 2000 mmOperating pressure: 230 barHold-down pressure: 58 barOil filling: 200 lDrive power: 11 kWOutside dimensions approx: 5750 x 2500 x 1700 mmWeight approx: 15 tWith- mot. backgauge- Angle stop front- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Sheet Metal Shears
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794748

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Hydraulic swing cut guillotine shears make HERA type HSS 3Machine -No: 557 built in 1984heavy, unbreakable all-steel designTechnical specifications:Passage: 1100 mmLarge sheet thickness at 400 N / mm 2.0 mmThroat: 200 mmNumber of strokes: 56 H / minStop length at the front: 1000 mmStop length at the back: 1000 mmMotor power: 2.2 kWWeight about 1500 kgDimensionswith- motorized backgauge- foot switch- front support arms- hydr. Hold-downused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Sheet Metal Shears
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794752

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Hydraulic guillotine shears make LUTHER type TS-S 25/4Year of construction 1973Technical specifications:Max. cutting length: 2530 mmMax. cutting thickness at 50 kg strength: 4.0 mmlateral projection: 200 mmTable height: 750 mmStrokes per minute:45Drive power: 15 kWDimensions L x W x H: 3010 x 2150 x 1800 mmWeight approx.: 6100 kgwith- Motorized backgauge- foot switch- angle stopusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 149806836
New in: 2023

new

check Seller: CNC-Maschinentechnik - Wolfgang ECKER
Location: Land-at

add to watchlist

Hydraulic sheet metal shears in backdrop cutting design with NC - controlled rear stop - manual cutting angle adjustment and hydraulic cutting gap adjustment, maximum cutting length 3,020 mm, maximum cutting capacity 8 mm steel sheet/ST40, cutting angle 0.5° to 2° NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections deeper than 1,000 mm - optionally available with a foldable sheet metal support at the rear stop or a conveyor belt with high-stop strips, drive power 11.5 kW, dimensions 3.6 x 1.2 m, weight approx. 7,600 kg

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 150201262
New in: 1993

used

check Seller: ZOMA Maschinenhandel
Location: Land-de

add to watchlist

Hydraul. Table scissors, used, ready for demonstration under electricity       hydraulic plate shearer, used , under power, ready for operation Type: XTSL 3016 Fabr./ make : Atlantic Year of construction/ year: 1993 Sheet thickness with the largest sheet width/ thickness at max. cutting length: 16 mm ( structural steel / mild steel ) 12 mm ( stainless steel / high grade steel) Cutting width/ cutting length: 3100 mm Weight/ weight: approx. 14 t Specification: Rear stop / backstop

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 161266611

used

check Seller: APT
Location: Deinze Land-be

add to watchlist

swing beam Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Backgauge: no backgauge

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 161266714

used

check Seller: APT
Location: Deinze Land-be

add to watchlist

LVD MVN 3100 x 6,35 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Backgauge: no backgauge

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 161266734

used

check Seller: APT
Location: Deinze Land-be

add to watchlist

Darley GS 3100 x 10 mm Cutting length: 3100 x 10 mm Strokes/min: 13 > 23 str/min Electric motor (power): 15 kW Length: 3420 mm Depth: 2300 mm Height: 2000 mm Weight: 9 ton Number of sheet holders: 14x

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
BLEMAS 3rd category level
  • BLEMAS guillotine shears (1)
  • BLEMAS hydraulic shear (1)
 
RESALE used machinery 25 years online