used BEYELER CNC Bending Presses

Capacity: 0 t Control: Cybelec S-DNC-8879-PS Technical data Pressure: 800 kN Total working length: 2050 mm Distance between the standards: 2050 mm Standard depth of throat: 255 mm Slide stroke, working stroke: from: 215 mm Mounting height max.: 390 mm Working speed: Press stroke: 8 mm/s up: 60 mm/s Voltage 50 Hz 3x: 380 Volt Motor power: 5.5 kW Machine´s weight about: 6700 kg Overall dimensions machine: Length: 3700 mm Width: 2000 mm Height: 3400 mm Various accessories: Set of bending tools Set of retaining clamps Motorized stop: 500 mm

Capacity: 150 t Opening maximum: 4100 mm Workpiece height maximum: 215 mm CNC Brand: Cybelec Max. bending length:        4100mm Distance between column:    3600mm Max. pressing force:        150T Beam stroke:                215mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               110mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  6 Length:                     5100mm Width:                      2000mm Height:                     2900mm  ...

Hydraulic Press Brake BEYELER PR6 100/2550 Year of construction: 1998 Command: CYBELEC DNC 804 PS/K 6 axes Capacity: 100 T x 2550 mm Maxi travel: 215 mm Throat depth: 405 mm Distance between uprights: 2050 mm Maxi closing speed: 200 mm/s Working speed: from 1 to 10 mm/s Motor: 7,5 kW sBack Rear Gauge R1 - R2 - Z1 - Z2 Dual pedal footswitch Voltage: 380 V Dimensions (L x W x H): 3000 x 2000 x 2550 mm Weight: 6,5 T

- Promecam type - It needs a basic reparation. - Hole: 0 mm - Open Height: 0 mm - Inclination of beam: 0 mm - Table width L -R: 0 mm - Backgauge movement: 0 mm - Operating hours: 0 - Type: 0 - Pressure force: 150 t - Bending length: 0 mm - Axes: 2 - Working area: 3.100 mm - Distance between uprights: 0 mm - Working speed: 100 mm/seg - Frame type: 0 - Returning speed: 100 mm/seg - Locking speed: 100 mm/seg - Throat: 0 mm - Control: Cybelec - Stroke max: 215 mm - Oil tank capacity: 0 l - Power: installed max: 7,5 kW - Weight: 9.200 kg - Dimensions (long x wide x high): 0 mm

Press brake, bending machine, bending machine Model: CNC Manufacturer: Beyeler Type: EuroBrake 3, 100x4100mm Control: Cybelec Euro 3 Year of construction: 1991 Capacity: 100t Max. working width: 4100mm Motor power: 8kW Machine dimensions: 4800x1400x2500mm Machine weight: 11000kg

Tandem 2 x 5m. Y1, Y2, X, R,, Z1 & Z2 Second controller must be repaired. - Pressure force: 150 t - Bending length: 5.100 mm - Axes: 6 (Y1 Y2 X R) - Working speed: 200 mm/seg - Control: DNC80 - Stroke max: 250 mm - Power: installed max: 11 kW - Weight: 14.000 kg

This Beyeler PR6 Bending machine was manufactured in the year 1997. It is equipped with a DNC 800 control unit. The machine has a pressing force of 1000 kN and a bending length of 3100 mm.

CNC press brake make BEYELER type MZ 30 / 1550Machine -No: 59009 / 2817 built in 1990Technical specifications:Press force: 30 tBending length: 1550 mmDistance between columns: 1400 mmTable width: 80 mmStand projection: 205 mmInstallation height: 340 mmTable height: 890 mmInfeed speed: 130 mm/sec.Working speed: 11 mm/sec.Stroke:140mmDimensions L x W x H: 2150 x 1250 x 1750 mmTotal power requirement: 3.0 kWWeight approx.: 1.7 tWith- Defective control Euro II- cpl. upper and lower toolused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

We offer for sale OHL CNC Beyeler PR6 100t/3m. Straight and curved punch, dies 10, 12, 16.

Capacity 2050 x 60 tons New DSP laser safe Cybelec DNC 60 control Y1, Y2 and X axis CNC controlled Including set of tools

Capacity 2550 x 225 tons Cybelec Euro III CNC control

Pressing force: 700kN, working length: 700mm, distance between the coloums: 350mm, stroke: 165mm, length: 955mm, width: 1685mm, height: 2501mm, weight: 2.3t.

Press brake Manufacturer: Beyeler Type: RT 1600x5100 CNC Year of construction: 1986 CNC control: Cybelek DNC60 Pressure: 160 to. Bending length: 5,100 mm

Key data: 150 t, 2550 mm

Stock number: 3866 CNC PRESS BRAKE Manufacturer: BEYELER, Type: PR 8 150D x 3100 mm Machine NO.: 96/445/002, Year of manufacture: 1996 Specifications: Gr. bending length 3100 mm Gr. pressure capacity 150 tons Stroke length 215 mm Column passage 2550 mm Projection 305 mm Total power 7.5 kW CNC control Cybelec DNC 908 PS Presscad Fabr. Controlled in 4 axis Y1-Y2-x1-x2 axes Length: 1900 mm, Height: 2600 mm, Width: 3500 mm, Weight: 9500 kg

Hydraulic press brake prod. by Beyeler Switzerland, type EURO III 100x3100. CNC control Cybelec EURO III, 3 controlled axes - controlled axes Y1+Y2+X+compensation of the deflection arrow of the table Wila Moducrown CVB/0. CNC control very easy to use Pressure 100 tons, bending length 3100 mm. Between supports 2650 mm. Stroke of cylinders 220 mm, loading 300 mm. Motor 9 kW, weight 8 tons. Set of punches of Amada-Promecam standard, + 6 groove die. Full technical documentation DTR, a stand instructions BiHP in Polish. We offer after-sales repair service and adjustments of CNC electronics and hydraulics.

Hydraulic press brake man. by Beyeler Switzerland, type RT 125 x3100. CNC control Cybelec DNC 3300PS, 3 controlled axes - controlled axes Y1+Y2+X CNC control very easy to use Pressure 125 tons, bending length 3100 mm. Between supports 2650 mm. Cylinder stroke 220 mm, loading 300 mm. 10 kW motor, weight 8.8 tons. A set of Amada-Promecam standard punches, + 9 groove die 120x120 mm. Full technical documentation DTR, occupational health and safety manual in Polish. We offer after-sales repair service and adjustments of CNC electronics and hydraulics.

Hydraulic press brake prod. by Beyeler Switzerland, type PR6 150x3100, rb. 1998. CNC control Cybelec DNC 80 PS, 6 controlled axes - controlled axes Y1+Y2+X+R+Z1+Z2 +compensation of table deflection arrow controlled from CNC. Windows, 2D graphics, color LCD screen, simulation of bending process. Hydraulic punch clamping. Pressure 150 tons, bending length 3100 mm. Between supports 2650 mm. Motor 11 kW, weight 9 tons. Full technical documentation DTR, work instructions BiHP in Polish. Possible training in operation and after-sales service of CNC and the whole machine.

Hydraulic guillotine for sheet metal cutting by Beyeler Switzerland type VR 10-3070, 3070 mm x 10 mm (ST40). Cybelec DNC10 PS fully CNC controlled machine. The machine has a variable gap between the knives and a hydraulically variable knife angle of 1 - 2.5 degrees, set after entering the thickness and hardness of the material. 18kW motor. Machine weight 9 t. Super-fast bumpers - 1050 mm bumper departure. Electrically adjustable cutting length in the range of 10-3070 mm. 2 supports to support sheet metal at the front of the machine, plus a 90 degree cutting gauge. Light line for line cutting. Original DTR documentation and health and safety instructions in Polish. Infrared protection of the rear working area. The machine is designed for continuous operation - 3 shifts.

Hydraulic press brake prod. by Beyeler Switzerland, type PR6 100x4100, rb. 1999. CNC control Cybelec DNC 80 PS, 6 controlled axes - controlled axes Y1+Y2+X+R+Z1+Z2 +hydraulic compensation of table deflection arrow controlled from CNC. Windows, 2D graphics, color LCD screen, simulation of bending process. Pressure 100 tons, bending length 4100 mm. Between supports 3650 mm. Motor 7,5 kW, weight 11 tons. Set of bending tools of Amada + Trumpf system. Full technical documentation DTR, a workstation manual BiHP in Polish. Possible training in operation and after-sales service of CNC and the whole machine.

The machine is in good technical condition, it is possible to test it by agreement. Machine weight: 8500 kg Nominal pressing force: 100 t (Mp) Working table length: 3100 mm Accessories: (straight and curved punch, die 10,12,16). Control system CYBELEC DNC 800.

swing beam Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Backgauge: no backgauge

BEYELER 80 Ton Press brake On offer is a BEYELER press brake, year 1991, CNC control, 80 t pressure, length 2 m,

Capacity: 6200 x 13 mm (steel) Delem DAC 350 control NC controlled back gauge NC controlled sheet thickness adjustment

Cutting bench cutting scissors sheet metal shears Type: Hydraulic Manufacturer: Beyeler Type: C 4100x10 Year of construction: 1992 ELGO adjustable backgauge Cutting width: 4100mm Cutting thickness: 10mm Electric backgauge: 1100mm Unloading: 80mm Total size: 4900x2450x2050mm Machine Weight: 14000kg

Working width: 4100mm, pressing force: 1250kN, controls: DNC 80, length: 4350mm, width: 1300mm, height: 2660mm, weight: 11t, including tools.